summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vmwgfx
AgeCommit message (Collapse)Author
2017-06-16BackMerge tag 'v4.12-rc5' into drm-nextDave Airlie
Linux 4.12-rc5 for nouveau fixes
2017-06-07drm/vmwgfx: Bump driver minor and dateThomas Hellstrom
While the atomic modesetting capability is signaled also elsewhere, also reflect it by a driver minor bump. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: Remove unused legacy cursor functionsSinclair Yeh
These function implementations and/or declarations are no longer used now that atomic is enabled. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reported-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: fix spelling mistake "exeeds" -> "exceeds"Colin Ian King
Trivial fix to spelling mistake in DRM_ERROR error message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-06-07drm/vmwgfx: Fix large topology crashSinclair Yeh
The previous attempt at this had an issue with with num_clips > 1 because it would always end up using the coordinates of the last clip while using width and height calculated from the bounding box of all the clips. So if the last clip happens to be not at the top-left corner of the bounding box, the CPU blit operation would go out of bounds. The original intent was to coalesce all the clips into one blit, and to do that we need to also track the starting point of the content buffer. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: Make sure to update STDU when FB is updatedSinclair Yeh
When a new FB is bound, we have to send an update command otherwise the new FB may not be shown Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: Make sure backup_handle is always validSinclair Yeh
When vmw_gb_surface_define_ioctl() is called with an existing buffer, we end up returning an uninitialized variable in the backup_handle. The fix is to first initialize backup_handle to 0 just to be sure, and second, when a user-provided buffer is found, we will use the req->buffer_handle as the backup_handle. Cc: <stable@vger.kernel.org> Reported-by: Murray McAllister <murray.mcallister@insomniasec.com> Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2017-06-07drm/vmwgfx: Handle vmalloc() failure in vmw_local_fifo_reserve()Dan Carpenter
If vmalloc() fails then we need to a bit of cleanup before returning. Cc: <stable@vger.kernel.org> Fixes: fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-06-07drm/vmwgfx: Don't create proxy surface for cursorSinclair Yeh
With atomic, the cursor surface is treated like a FB. Creating a proxy surface for cursor doesn't gain us much benefit. This fixes the issue on atomic enabled 2D VMs where the cursor disappears. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-06-07drm/vmwgfx: limit the number of mip levels in vmw_gb_surface_define_ioctl()Vladis Dronov
The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is a user-controlled 'uint32_t' value which is used as a loop count limit. This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'. References: https://bugzilla.redhat.com/show_bug.cgi?id=1437431 Cc: <stable@vger.kernel.org> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-05-22drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPIRobert Foss
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI as a convenience. Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up through the atomic API, but realizing that userspace is likely to take shortcuts and assume that the enum values are what is sent over the wire. As a result these defines are provided purely as a convenience to userspace applications. Changes since v3: - Switched away from past tense in comments - Add define name change to previously mis-spelled DRM_REFLECT_X comment - Improved the comment for the DRM_MODE_REFLECT_<axis> comment Changes since v2: - Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_ - Fix compilation errors - Changed comment formatting - Deduplicated comment lines - Clarified DRM_MODE_PROP_REFLECT_ comment Changes since v1: - Moved defines from drm.h to drm_mode.h - Changed define prefix from DRM_ to DRM_MODE_PROP_ - Updated uses of the defines to the new prefix - Removed include from drm_rect.c - Stopped using the BIT() macro Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
2017-05-18drm/vmwgfx: fix include notation and remove -Iinclude/drm flagMasahiro Yamada
Include <drm/*.h> instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-18-git-send-email-yamada.masahiro@socionext.com
2017-04-21drm/vmwgfx: Convert macro to octal representationØyvind A. Holm
Change "S_IRUSR | S_IWUSR" to "0600", it's easier to parse mentally. This change should be part of commit 50f837371dd9 ("drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444 with macro""), but the patch was truncated somewhere in the patch route, so add the missing change. Extract from the original commit message: commit 50f837371dd9aea5470c06d5d10bc9ca3e8155b6 Author: Øyvind A. Holm <sunny@sunbase.org> Date: Thu Mar 23 14:54:48 2017 -0700 drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444 with macro" This reverts commit 2d8e60e8b074 ("drm/vmwgfx: Replace numeric parameter like 0444 with macro") The commit belongs to the series of 1285 patches sent to LKML on 2016-08-02, it changes the representation of file permissions from the octal value "0600" to "S_IRUSR | S_IWUSR". The general consensus was that the changes does not increase readability, quite the opposite; 0600 is easier to parse mentally than S_IRUSR | S_IWUSR. Signed-off-by: Øyvind A. Holm <sunny@sunbase.org> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-04-21Merge tag 'drm-misc-next-fixes-2017-04-20' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next drm-misc-next-fixes-2017-04-20 Core changes: - Maintain sti via drm-misc (Vincent) - Rename dma_buf_ops->kmap_* to avoid naming collision (Logan) Driver changes: - Fix UHD displays on stih407 (Vincent) - Fix uninitialized var return in atmel-hlcdc (Dan) * tag 'drm-misc-next-fixes-2017-04-20' of git://anongit.freedesktop.org/git/drm-misc: dma-buf: Rename dma-ops to prevent conflict with kunmap_atomic macro drm: atmel-hlcdc: Uninitialized return in atmel_hlcdc_create_outputs() drm/sti: fix GDP size to support up to UHD resolution MAINTAINERS: add drm/sti driver into drm-misc
2017-04-20dma-buf: Rename dma-ops to prevent conflict with kunmap_atomic macroLogan Gunthorpe
Seeing the kunmap_atomic dma_buf_ops share the same name with a macro in highmem.h, the former can be aliased if any dma-buf user includes that header. I'm personally trying to include highmem.h inside scatterlist.h and this breaks the dma-buf code proper. Christoph Hellwig suggested [1] renaming it and pushing this patch ASAP. To maintain consistency I've renamed all four of kmap* and kunmap* to be map* and unmap*. (Even though only kmap_atomic presently conflicts.) [1] https://www.spinics.net/lists/target-devel/msg15070.html Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1492630570-879-1-git-send-email-logang@deltatee.com
2017-04-11Merge tag 'drm-misc-next-2017-04-07' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Last drm-misc-next pull req for 4.12 Core changes: - fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry) - drm_ioctl and drm_sysfs improved/gained documentation (Daniel) - [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander) - Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff (Daniel) - Add connector_atomic_check to check conn constraints on modeset (Maarten) - Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob) Driver changes: - meson moved to drm-misc (Neil) - Added support for Amlogic GX SoCs in dw-hdmi (Neil) - Rockchip unbind actually cleans up the things bind initializes (Jeffy) - A couple misc fixes in virtio, dw-hdmi NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx as well as the new synopsys media formats) * tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits) Revert "drm: Don't allow interruptions when opening debugfs/crc" drm: Only take cursor locks when the cursor plane exists drm/vmwgfx: Fix fbdev emulation using legacy functions drm/rockchip: Shutdown all crtcs when unbinding drm drm/rockchip: Reorder drm bind/unbind sequence drm/rockchip: analogix_dp: Disable clock when unbinding drm/rockchip: vop: Unprepare clocks when unbinding drm/rockchip: vop: Enable pm domain before vop_initial drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding drm/rockchip: cdn-dp: Don't try to release firmware when not loaded drm: bridge: analogix: Destroy connector & encoder when unbinding drm: bridge: analogix: Disable clock when unbinding drm: bridge: analogix: Unregister dp aux when unbinding drm: bridge: analogix: Detach panel when unbinding analogix dp drm: Don't allow interruptions when opening debugfs/crc drm/virtio: don't leak bo on drm_gem_object_init failure drm: bridge: dw-hdmi: fix input format/encoding from plat_data drm: omap: use common OF graph helpers drm: convert drivers to use drm_of_find_panel_or_bridge drm: convert drivers to use of_graph_get_remote_node ...
2017-04-11Backmerge tag 'v4.11-rc6' into drm-nextDave Airlie
Linux 4.11-rc6 drm-misc needs 4.11-rc5, may as well fix conflicts with rc6.
2017-04-07drm/vmwgfx: Fix fbdev emulation using legacy functionsDaniel Vetter
I've broken this by removing the backoff handling from the set_config2atomic helper in commit 38b6441e4e75c0b319cfe4d9364c1059fc1e3c2b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 22 22:50:58 2017 +0100 drm/atomic-helper: Remove the backoff hack from set_config Fixing this properly would mean we get to wire the acquire_ctx all the way through vmwgfx fbdev code, and doing the same was tricky for the shared fbdev layer. Probably much better to look into refactoring the entire code to use the helpers, but since that's not a viable long-term solution fix the issue by open-coding a vmwgfx version of set_config, that does the legacy backoff dance internally. Note: Just compile-tested. The idea is to take drm_mode_set_config_internal(), remove the "is this a legacy driver" check, and whack the drm_atomic_legacy_backoff trickery at the end. Since drm_atomic_legacy_backoff is for atomic commits only we need to open-code it. Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170406200256.26040-1-daniel.vetter@ffwll.ch
2017-04-06drm: Add acquire ctx to ->gamma_set hookDaniel Vetter
Atomic helpers really want this instead of the hacked-up legacy backoff trick, which unfortunately prevents drivers from using their own private drm_modeset_locks. Aside: There's a few atomic drivers (nv50, vc4, soon vmwgfx) which don't yet use the new atomic color mgmt/gamma table stuff. Would be nice if they could switch over and just hook up drm_atomic_helper_legacy_gamma_set() instead. Cc: Dave Airlie <airlied@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-13-daniel.vetter@ffwll.ch
2017-04-04drm/ttm: add io_mem_pfn callbackChristian König
This allows the driver to handle io_mem mappings on their own. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-03Merge tag 'drm-misc-next-2017-03-31' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next drm-misc for 4.12: Core: - Removed some fb subsampling dimension checks from core (Ville) - Some MST slot cleanup (Dhinakaran) - Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel) - Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts (Daniel) - Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel) - Cleanups around vblank as well as allowing lockless counter reads (Chris W.) - VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas) Drivers: - Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.) - Thunderbolt external GPU awareness added (Lukas) * tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits) apple-gmux: Don't switch external DP port on 2011+ MacBook Pros drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo PCI: Recognize Thunderbolt devices MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo drm: Fix locking gotcha in page_flip ioctl drm: Clarify the role of plane_state argument to drm_simple update(). drm: Clear e after kfree in drm_mode_page_flip_ioctl drm: Convert cmpxchg(bool) back to a two step operation drm/bridge: ti-tfp410: support hpd via gpio drm: use .hword to represent 16-bit numbers Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl" drm: Fixup failure paths in drm_atomic_helper_set_config drm: Peek at the current counter/timestamp for vblank queries drm: Refactor vblank sequence number comparison drm: vblank cannot be enabled if dev->irq_enabled is false drm: Mark up accesses of vblank->enabled outside of its spinlock drm: Make the decision to keep vblank irq enabled earlier drm/atomic-helper: Remove the backoff hack from set_config ...
2017-03-31drm/vmwgfx: Properly check display/scanout surface sizeSinclair Yeh
The scanout surface size is the smaller of max texture size and max STDU size. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Support topology greater than texture sizeSinclair Yeh
Most of the display servers today use a single surface to represent the entire desktop even if it's stretched across multiple screens. For vmwgfx with STDU, the maximum surface size is limited to the maximum texture size on the host. On a 2D VM, this limits our ability to support configurations with more than one 4K monitor. To get past this limitation, we will now allow using a large DMA buf as the framebuffer, and take care of blitting contents from this DMA buf to the display buffer. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Re-implement the stream resource as a simple resource.Thomas Hellstrom
Provide and document a reference implementation. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-03-31drm/vmwgfx: Introduce a simple resource typeThomas Hellstrom
The callbacks we need to provide to many resources are very similar, so provide a simple resource type with a number of helpers for these callbacks. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-03-31drm/vmwgfx: Revert "drm/vmwgfx: Replace numeric parameter like 0444 with macro"Øyvind A. Holm
This reverts commit 2d8e60e8b074 ("drm/vmwgfx: Replace numeric parameter like 0444 with macro") The commit belongs to the series of 1285 patches sent to LKML on 2016-08-02, it changes the representation of file permissions from the octal value "0600" to "S_IRUSR | S_IWUSR". The general consensus was that the changes does not increase readability, quite the opposite; 0600 is easier to parse mentally than S_IRUSR | S_IWUSR. It also causes argument inconsistency, due to commit 04319d89fbec ("drm/vmwgfx: Add an option to change assumed FB bpp") that added another call to module_param_named() where the permissions are written as 0600. Signed-off-by: Øyvind A. Holm <sunny@sunbase.org> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-03-31drm/vmwgfx: Fix LDU X blank screen until mode change issueSinclair Yeh
vmw_ldu_crtc_helper_commit() is not called if drm_atomic_crtc_needs_modeset() decides nothing related to CRTC timing has changed. So a better place for this code is in vmw_ldu_primary_plane_atomic_update() since we will need to update ld->fb every time the FB is updated. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Skipping fbdev fb pinning for lduSinclair Yeh
Pinning fbdev's FB at the start of VRAM prevents X from pinning its FB. Since for ldu, the fb would be pinned anyway during a mode set, just skip pinning it in fbdev. This is not the best solution, but since ldu is not used much anymore, it seems like a reasonable workaround. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Explicityly track screen target width and heightSinclair Yeh
We can no longer make the assumption that vmw_stdu_update_st() will be called when there's a valid display surface attached. So instead of using display_srf for width and height, make a record of these paremeters when the screen target is first defined. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Turn on DRIVER_ATOMIC flagSinclair Yeh
Now that the legacy path has been tested, turn on the DRIVER_ATOMIC flag so user mode driver can start going through the Atomic path. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2017-03-31drm/vmwgfx: Switch over to internal atomic API for SOU and LDUSinclair Yeh
Switch over to internal atomic API. This completes the atomic internal atomic switch for all the Display Units. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Switch over to internal atomic API for STDUSinclair Yeh
Switch over to using internal atomic API for mode set. This removes the legacy set_config API, replacing it with drm_atomic_helper_set_config(). The DRM helper will use various vmwgfx-specific atomic functions to set a mode. DRIVER_ATOMIC capability flag is not yet set, so the user mode will still use the legacy mode set IOCTL. v2: * Avoid a clash between page-flip pinning and setcrtc pinning, modify the page-flip code to use the page-flip helper and the atomic callbacks. To enable this, we will need to add a wrapper around atomic_commit. * Add vmw_kms_set_config() to work around vmwgfx xorg driver bug Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Fixes to vmwgfx_fbSinclair Yeh
1. When unsetting a mode, num_connector should be set to zero 2. The pixel_format field needs to be initialized as newer DRM internal functions checks this field 3. Take the drm_modeset_lock_all() because vmw_fb_kms_detach() can change current mode Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Add and connect atomic state object check/commitSinclair Yeh
This connects the main state object check and commit function. v2 * Use drm_atomic_helper_commit() rather than a vmwgfx-specific one Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2017-03-31drm/vmwgfx: Add and connect connector helper functionSinclair Yeh
These helpers won't be called until we flip on the atomic support flag or set drm_crtc_funcs->set_config to using the atomic helper. v2 Use drm_atomic_helper_best_encoder() rather than a vmwgfx-specific one Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2017-03-31drm/vmwgfx: Add and connect plane helper functionsSinclair Yeh
Refactor previous FB and cursor plane update code into their atomic counterparts: check, update, prepare, cleanup, and disable. These helpers won't be called until we flip on the atomic support flag or set drm_crtc_funcs->set_config to using the atomic helper. v2: * Removed unnecessary pinning of cursor surface * Added a few function headers v3: * Set clip region equal to the destination region * Fixed surface pinning policy * Enable SVGA mode in vmw_sou_primary_plane_prepare_fb Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Add and connect CRTC helper functionsSinclair Yeh
Atomic mode set requires us to refactor existing vmw_stdu_crtc_set_config code into sections that check the validity of the new mode, and sections that actually program the hardware state. vmw_du_crtc_atomic_check() takes CRTC-related checking code. In a later patch, vmw_du_primary_plane_atomic_check() will take framebuffer-related checking code. These helpers won't be called until we flip on the atomic support flag or set drm_crtc_funcs->set_config to using the atomic helper. v2: * The state->num_connector is actually the total number of potential connectors, not just the one associated with the display unit. The proper one to check is ->connector_mask. * Add the check to only allow plane state to be the same as crtc state (Thanks to mlankhorst) * Make sure to turn on SVGA mode before using VRAM. SVGA mode is disabled in master_drop if dbdev is not running. v3: * Moved dot clock override to crtc_atomic_check Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2017-03-31drm/vmwgfx: Connector atomic stateSinclair Yeh
Add connector handling functions. Start tracking is_implicity in the connector state. Eventually, this field should be tracked exclusively in a connector state. Now that plane and connector states have been created, we can also activate the code that use CRTC state. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Plane atomic stateSinclair Yeh
Add plane state handling functions. We have to keep track of a few plane states so we cannot use the DRM helper for this. Created vmw_plane_state along with functions to reset, duplicate, and destroty it. v2 * Removed cursor clean up special case Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Daniel Vetter <daniel@ffwll.ch>
2017-03-31drm/vmwgfx: CRTC atomic stateSinclair Yeh
Create and Add CRTC state. We currently do not track any properties or custom states so we can technically use the DRM helpers. Creating this code just to make potential future additions easier. Most of the new code will be compiled but not enabled until plane/connector state handling code is also in place. This is the first of a series to enable atomic mode set for vmwgfx. The atomic enabling effort was done in collaboration with Thomas Hellstrom and the VMware Graphics Team. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Add universal plane supportSinclair Yeh
Universal support is prerequisite for atomic mode set. Explicitly create planes for the cursor and the primary FB. With a functional cursor plane, the DRM will no longer use the legacy cursor_set2 and cursor_move entry points. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-31drm/vmwgfx: Removed unused snooper.crtc fieldSinclair Yeh
This field is not being used anymore Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-30drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()Li Qiang
In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the 'req->mip_levels' array. This array can be assigned any value from the user space. As both the 'num_sizes' and the array is uint32_t, it is easy to make 'num_sizes' overflow. The later 'mip_levels' is used as the loop count. This can lead an oob write. Add the check of 'req->mip_levels' to avoid this. Cc: <stable@vger.kernel.org> Signed-off-by: Li Qiang <liqiang6-s@360.cn> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-03-30drm/vmwgfx: Remove getparam error messageThomas Hellstrom
The mesa winsys sometimes uses unimplemented parameter requests to check for features. Remove the error message to avoid bloating the kernel log. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-03-30drm/ttm, drm/vmwgfx: Relax permission checking when opening surfacesThomas Hellstrom
Previously, when a surface was opened using a legacy (non prime) handle, it was verified to have been created by a client in the same master realm. Relax this so that opening is also allowed recursively if the client already has the surface open. This works around a regression in svga mesa where opening of a shared surface is used recursively to obtain surface information. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-03-30drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()Murray McAllister
In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()), which can leak useful addresses to dmesg. Add check to avoid a size of 0. Cc: <stable@vger.kernel.org> Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-03-30drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()Murray McAllister
Before memory allocations vmw_surface_define_ioctl() checks the upper-bounds of a user-supplied size, but does not check if the supplied size is 0. Add check to avoid NULL pointer dereferences. Cc: <stable@vger.kernel.org> Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-03-30drm/vmwgfx: Type-check lookups of fence objectsThomas Hellstrom
A malicious caller could otherwise hand over handles to other objects causing all sorts of interesting problems. Testing done: Ran a Fedora 25 desktop using both Xorg and gnome-shell/Wayland. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2017-03-29drm: Add acquire ctx parameter to ->set_configDaniel Vetter
Surprisingly a lot of legacy drivers roll their own, for runtime pm and because vmwgfx. Also make nouveau's set_config static while at it. Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->page_flip(_target)Daniel Vetter
Again just going through the motions, no functional changes in here. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-22 06:32:31 +0000