summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4
AgeCommit message (Collapse)Author
2021-02-09drm/vc4: hdmi: Remove cec_available flagDom Cobley
Now that our HDMI controller supports CEC for the BCM2711, let's remove that flag. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-12-maxime@cerno.tech (cherry picked from commit f551863af919edd60f76a24126da3ac10294ace1) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Support BCM2711 CEC interrupt setupMaxime Ripard
The HDMI controller found in the BCM2711 has an external interrupt controller for the CEC and hotplug interrupt shared between the two instances. Let's add a variant flag to register a single interrupt handler and deals with the interrupt handler setup, or two interrupt handlers relying on an external irqchip. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-11-maxime@cerno.tech (cherry picked from commit ad6380e9aaf459c22006c73fd3d4dd6f41e8f048) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Split the interrupt handlersMaxime Ripard
The BCM2711 has two different interrupt sources to transmit and receive CEC messages, provided through an external interrupt chip shared between the two HDMI interrupt controllers. The rest of the CEC controller is identical though so we need to change a bit the code organisation to share the code as much as possible, yet still allowing to register independent handlers. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-10-maxime@cerno.tech (cherry picked from commit 0c38490a031071c0d81b400949f43ea6f4b0cd8f) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Introduce a CEC clockMaxime Ripard
While the BCM2835 had the CEC clock derived from the HSM clock, the BCM2711 has a dedicated parent clock for it. Let's introduce a separate clock for it so that we can handle both cases. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-9-maxime@cerno.tech (cherry picked from commit cd7f016c93b697dea79a884162cbf7311283fe12) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Update the CEC clock divider on HSM rate changeMaxime Ripard
As part of the enable sequence we might change the HSM clock rate if the pixel rate is different than the one we were already dealing with. On the BCM2835 however, the CEC clock derives from the HSM clock so any rate change will need to be reflected in the CEC clock divider to output 40kHz. Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-8-maxime@cerno.tech (cherry picked from commit a9dd0b9a5c3e11c79e6ff9c7fdf07c471732dcb6) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Compute the CEC clock divider from the clock rateMaxime Ripard
The CEC clock divider needs to output a frequency of 40kHz from the HSM rate on the BCM2835. The driver used to have a fixed frequency for it, but that changed for the BCM2711 and we now need to compute it dynamically to maintain the proper rate. Fixes: cd4cb49dc5bb ("drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-7-maxime@cerno.tech (cherry picked from commit f1ceb9d10043683b89e5e5e5848fb4e855295762) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Restore cec physical address on reconnectDom Cobley
Currently we call cec_phys_addr_invalidate on a hotplug deassert. That may be due to a TV power cycling, or an AVR being switched on (and switching edid). This makes CEC unusable since our controller wouldn't have a physical address anymore. Set it back up again on the hotplug assert. Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-6-maxime@cerno.tech (cherry picked from commit b06eecb5158e5f3eb47b9d05aea8c259985cc5f7) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Fix up CEC registersDom Cobley
The commit 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") forgot one CEC register, and made a copy and paste mistake for another one. Fix those mistakes. Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-5-maxime@cerno.tech (cherry picked from commit 303085bc11bb7aebeeaaf09213f99fd7aa539a34) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Fix register offset with longer CEC messagesDom Cobley
The code prior to 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") was relying on the fact that the register offset was incremented by 4 for each readl call. That worked since the register width is 4 bytes. However, since that commit the HDMI_READ macro is now taking an enum, and the offset doesn't increment by 4 but 1 now. Divide the index by 4 to fix this. Fixes: 311e305fdb4e ("drm/vc4: hdmi: Implement a register layout abstraction") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-4-maxime@cerno.tech (cherry picked from commit e9c9481f373eb7344f9e973eb28fc6e9d0f46485) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-02-09drm/vc4: hdmi: Move hdmi reset to bindDom Cobley
The hdmi reset got moved to a later point in the commit 9045e91a476b ("drm/vc4: hdmi: Add reset callback"). However, the reset now occurs after vc4_hdmi_cec_init and so tramples the setup of registers like HDMI_CEC_CNTRL_1 This only affects pi0-3 as on pi4 the cec registers are in a separate block Fixes: 9045e91a476b ("drm/vc4: hdmi: Add reset callback") Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-3-maxime@cerno.tech (cherry picked from commit 7155334f15f360f5c98391c5c7e12af4c13395c4) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-01-25Merge tag 'v5.11-rc5' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge v5.11-rc5 into drm-next to clean up a bunch of conflicts we are dragging around. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-01-18drm/vc4: Unify PCM card's driver_nameNicolas Saenz Julienne
User-space ALSA matches a card's driver name against an internal list of aliases in order to select the correct configuration for the system. When the driver name isn't defined, the match is performed against the card's name. With the introduction of RPi4 we now have two HDMI ports with two distinct audio cards. This is reflected in their names, making them different from previous RPi versions. With this, ALSA ultimately misses the board's configuration on RPi4. In order to avoid this, set "card->driver_name" to "vc4-hdmi" unanimously. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Fixes: f437bc1ec731 ("drm/vc4: drv: Support BCM2711") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210115191209.12852-1-nsaenzjulienne@suse.de
2021-01-15drm/vc4: Initialize vc4_drm_driver with CMA helper defaultsThomas Zimmermann
The function vc4_prime_import_sg_table() is an otherwise empty wrapper around CMA's drm_gem_cma_prime_import_sg_table(). Removing it in favor of the latter allows to initialize vc4_drm_driver with CMA's initializer macro. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210114084949.29014-1-tzimmermann@suse.de
2021-01-13drm/vc4: Move mmap implementation into GEM object functionThomas Zimmermann
Moving vc4's mmap code from vc4_mmap() into a GEM object function allows for the use drm_gem_mmap() and drm_gem_prime_mmap(). The content of vc4_drm_fpos can then be generated by DEFINE_DRM_GEM_FOPS(). The actual mmap implementation is just a check if the BO is a validated shader plus the default CMA mmap code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210108140808.25775-4-tzimmermann@suse.de
2021-01-13drm/vc4: Make several BO functions staticThomas Zimmermann
Rearrange the code to make BO functions static. This will also help with streamlining the BO's mmap implementation. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210108140808.25775-3-tzimmermann@suse.de
2021-01-13drm/vc4: Use drm_gem_cma_vmap() directlyThomas Zimmermann
Validated shaders cannot be exported. There's no need for testing this in the BO's vmap implementation. Call drm_gem_cma_vmap() directly instead. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210108140808.25775-2-tzimmermann@suse.de
2021-01-07Merge tag 'du-next-20210105' of git://linuxtv.org/pinchartl/media into drm-nextDaniel Vetter
- Add default modes for connectors in unknown state - R-Car DU conversion to DRM-managed API - R-Car DU miscellaneous fixes - Miscellaneous bridge and bridge bindings fixes - Assorted misc driver cleanups - Constify drm_driver for PCI devices Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/X/P8IOrVXkTpLeCm@pendragon.ideasonboard.com
2021-01-05drm: vc4: Remove unnecessary drm_plane_cleanup() wrapperLaurent Pinchart
Use the drm_plane_cleanup() function directly as the drm_plane_funcs .destroy() handler without creating an unnecessary wrapper around it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-12-16drm/vc4: hdmi: Enable 10/12 bpc outputMaxime Ripard
The BCM2711 supports higher bpc count than just 8, so let's support it in our driver. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-10-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Limit the BCM2711 to the max without scramblingMaxime Ripard
Unlike the previous generations, the HSM clock limitation is way above what we can reach without scrambling, so let's move the maximum frequency we support to the maximum clock frequency without scrambling. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-9-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Use the connector state pixel rate for the PHYMaxime Ripard
The PHY initialisation parameters are not based on the pixel clock but the TMDS clock rate which can be the pixel clock in the standard case, but could be adjusted based on some parameters like the bits per color. Since the TMDS clock rate is stored in our custom connector state already, let's reuse it from there instead of computing it again. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-8-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Store pixel frequency in the connector stateMaxime Ripard
The pixel rate is for now quite simple to compute, but with more features (30 and 36 bits output, YUV output, etc.) will depend on a bunch of connectors properties. Let's store the rate we have to run the pixel clock at in our custom connector state, and compute it in atomic_check. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-7-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Create a custom connector stateMaxime Ripard
When run with a higher bpc than 8, the clock of the HDMI controller needs to be adjusted. Let's create a connector state that will be used at atomic_check and atomic_enable to compute and store the clock rate associated to the state. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-6-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Don't access the connector state in reset if kmalloc failsMaxime Ripard
drm_atomic_helper_connector_reset uses kmalloc which, from an API standpoint, can fail, and thus setting connector->state to NULL. However, our reset hook then calls drm_atomic_helper_connector_tv_reset that will access connector->state without checking if it's a valid pointer or not. Make sure we don't end up accessing a NULL pointer. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-5-maxime@cerno.tech
2020-12-16drm/vc4: hdmi: Take into account the clock doubling flag in atomic_checkMaxime Ripard
Commit 63495f6b4aed ("drm/vc4: hdmi: Make sure our clock rate is within limits") was intended to compute the pixel rate to make sure we remain within the boundaries of what the hardware can provide. However, unlike what mode_valid was checking for, we forgot to take into account the clock doubling flag that can be set for modes. Let's honor that flag if it's there. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Fixes: 63495f6b4aed ("drm/vc4: hdmi: Make sure our clock rate is within limits") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-4-maxime@cerno.tech
2020-12-16drm/vc4: Pass the atomic state to encoder hooksMaxime Ripard
We'll need to access the connector state in our encoder setup, so let's just pass the whole DRM state to our private encoder hooks. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-3-maxime@cerno.tech
2020-12-16drm/vc4: hvs: Align the HVS atomic hooks to the new APIMaxime Ripard
Since the CRTC setup in vc4 is split between the PixelValves/TXP and the HVS, only the PV/TXP atomic hooks were updated in the previous commits, but it makes sense to update the HVS ones too. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201215154243.540115-2-maxime@cerno.tech
2020-12-15drm: automatic legacy gamma supportTomi Valkeinen
To support legacy gamma ioctls the drivers need to set drm_crtc_funcs.gamma_set either to a custom implementation or to drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the latter. We can simplify this by making the core handle it automatically. Move the drm_atomic_helper_legacy_gamma_set() functionality into drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
2020-12-15drm/vc4: kms: Convert to atomic helpersMaxime Ripard
Now that the semaphore is gone, our atomic_commit implementation is basically drm_atomic_helper_commit with a somewhat custom commit_tail, the main difference being that we're using wait_for_flip_done instead of wait_for_vblanks used in the drm_atomic_helper_commit_tail helper. Let's switch to using drm_atomic_helper_commit. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-8-maxime@cerno.tech
2020-12-15drm/vc4: kms: Remove async modeset semaphoreMaxime Ripard
Now that we have proper ordering guaranteed by the previous patch, the semaphore is redundant and can be removed. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-7-maxime@cerno.tech
2020-12-15drm/vc4: kms: Remove unassigned_channels from the HVS stateMaxime Ripard
The HVS state now has both unassigned_channels that reflects the channels that are not used in the associated state, and the in_use boolean for each channel that says whether or not a particular channel is in use. Both express pretty much the same thing, and we need the in_use variable to properly track the commits, so let's get rid of unassigned_channels. Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-6-maxime@cerno.tech
2020-12-15drm/vc4: kms: Wait on previous FIFO users before a commitMaxime Ripard
If we're having two subsequent, non-blocking, commits on two different CRTCs that share no resources, there's no guarantee on the order of execution of both commits. However, the second one will consider the first one as the old state, and will be in charge of freeing it once that second commit is done. If the first commit happens after that second commit, it might access some resources related to its state that has been freed, resulting in a use-after-free bug. The standard DRM objects are protected against this, but our HVS private state isn't so let's make sure we wait for all the previous FIFO users to finish their commit before going with our own. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-5-maxime@cerno.tech
2020-12-15drm/vc4: Simplify a bit the global atomic_checkMaxime Ripard
When we can't allocate a new channel, we can simply return instead of having to handle both cases, and that simplifies a bit the code. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151138.1739736-4-maxime@cerno.tech
2020-12-15Merge drm/drm-next into drm-misc-nextMaarten Lankhorst
Required backmerge since we will be based on top of v5.11, and there has been a request to backmerge already to upstream some features. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2020-12-15Merge tag 'drm-misc-next-2020-11-27-1' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.11: UAPI Changes: Cross-subsystem Changes: * char/agp: Disable frontend without CONFIG_DRM_LEGACY * mm: Fix fput in mmap error path; Introduce vma_set_file() to change vma->vm_file Core Changes: * dma-buf: Use sgtables in system heap; Move heap helpers to CMA-heap code; Skip sync for unmapped buffers; Alloc higher order pages is available; Respect num_fences when initializing shared fence list * doc: Improvements around DRM modes and SCALING_FILTER * Pass full state to connector atomic functions + callee updates * Cleanups * shmem: Map pages with caching by default; Cleanups * ttm: Fix DMA32 for global page pool * fbdev: Cleanups * fb-helper: Update framebuffer after userspace writes; Unmap console buffer during shutdown; Rework damage handling of shadow framebuffer Driver Changes: * amdgpu: Multi-hop fixes, Clenaups * imx: Fix rotation for Vivante tiled formats; Support nearest-neighour skaling; Cleanups * mcde: Fix RGB formats; Support DPI output; Cleanups * meson: HDMI clock fixes * panel: Add driver and bindings for Innolux N125HCE-GN1 * panel/s6e63m0: More backlight levels; Fix init; Cleanups * via: Clenunps * virtio: Use fence ID for handling fences; Cleanups Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201127083055.GA29139@linux-uq9g
2020-12-14Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Not a huge amount of big things here, AMD has support for a few new HW variants (vangogh, green sardine, dimgrey cavefish), Intel has some more DG1 enablement. We have a few big reworks of the TTM layers and interfaces, GEM and atomic internal API reworks cross tree. fbdev is marked orphaned in here as well to reflect the current reality. core: - documentation updates - deprecate DRM_FORMAT_MOD_NONE - atomic crtc enable/disable rework - GEM convert drivers to gem object functions - remove SCATTER_LIST_MAX_SEGMENT sched: - avoid infinite waits ttm: - remove AGP support - don't modify caching for swapout - ttm pinning rework - major TTM reworks - new backend allocator - multihop support vram-helper: - top down BO placement fix - TTM changes - GEM object support displayport: - DP 2.0 DPCD prep work - DP MST extended DPCD caps fbdev: - mark as orphaned amdgpu: - Initial Vangogh support - Green Sardine support - Dimgrey Cavefish support - SG display support for renoir - SMU7 improvements - gfx9+ modiifier support - CI BACO fixes radeon: - expose voltage via hwmon on SUMO amdkfd: - fix unique id handling i915: - more DG1 enablement - bigjoiner support - integer scaling filter support - async flip support - ICL+ DSI command mode - Improve display shutdown - Display refactoring - eLLC machine fbdev loading fix - dma scatterlist fixes - TGL hang fixes - eLLC display buffer caching on SKL+ - MOCS PTE seeting for gen9+ msm: - Shutdown hook - GPU cooling device support - DSI 7nm and 10nm phy/pll updates - sm8150/sm2850 DPU support - GEM locking re-work - LLCC system cache support aspeed: - sysfs output config support ast: - LUT fix - new display mode gma500: - remove 2d framebuffer accel panfrost: - move gpu reset to a worker exynos: - new HDMI mode support mediatek: - MT8167 support - yaml bindings - MIPI DSI phy code moved etnaviv: - new perf counter - more lockdep annotation hibmc: - i2c DDC support ingenic: - pixel clock reset fix - reserved memory support - allow both DMA channels at once - different pixel format support - 30/24/8-bit palette modes tilcdc: - don't keep vblank irq enabled vc4: - new maintainer added - DSI registration fix virtio: - blob resource support - host visible and cross-device support - uuid api support" * tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits) drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs drm/amdgpu: fix size calculation with stolen vga memory drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init drm/amdgpu: free the pre-OS console framebuffer after the first modeset drm/amdgpu: enable runtime pm using BACO on CI dGPUs drm/amdgpu/cik: enable BACO reset on Bonaire drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven drm/amd/pm: remove one unsupported smu function for vangogh drm/amd/display: setup system context for APUs drm/amd/display: add S/G support for Vangogh drm/amdkfd: Fix leak in dmabuf import drm/amdgpu: use AMDGPU_NUM_VMID when possible drm/amdgpu: fix sdma instance fw version and feature version init drm/amd/pm: update driver if version for dimgrey_cavefish drm/amd/display: 3.2.115 drm/amd/display: [FW Promotion] Release 0.0.45 drm/amd/display: Revert DCN2.1 dram_clock_change_latency update drm/amd/display: Enable gpu_vm_support for dcn3.01 drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on drm/amd/display: Add wm table for Renoir ...
2020-12-07drm/vc4: dsi: Add configuration for BCM2711 DSI1Dave Stevenson
BCM2711 DSI1 doesn't have the issue with the ARM not being able to write to the registers, therefore remove the DMA workaround for that compatible string. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-8-maxime@cerno.tech
2020-12-07drm/vc4: dsi: Add support for DSI0Dave Stevenson
DSI0 was partially supported, but didn't register with the main driver, and the code was inconsistent as to whether it checked port == 0 or port == 1. Add compatible string and other support to make it consistent. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-6-maxime@cerno.tech
2020-12-07drm/vc4: dsi: Introduce a variant structureMaxime Ripard
Most of the differences between DSI0 and DSI1 are handled through the ID. However, the BCM2711 DSI is going to introduce one more variable to the mix and will break some expectations of the earlier, simpler, test. Let's add a variant structure that will address most of the differences between those three controllers. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-5-maxime@cerno.tech
2020-12-07drm/vc4: dsi: Use snprintf for the PHY clocks instead of an arrayMaxime Ripard
The DSI clocks setup function has been using an array to store the clock name of either the DSI0 or DSI1 blocks, using the port ID to choose the proper one. Let's switch to an snprintf call to do the same thing and simplify the array a bit. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-4-maxime@cerno.tech
2020-12-07drm/vc4: dsi: Correct DSI register definitionDave Stevenson
The DSI1_PHY_AFEC0_PD_DLANE1 and DSI1_PHY_AFEC0_PD_DLANE3 register definitions were swapped, so trying to use more than a single data lane failed as lane 1 would get powered down. (In theory a 4 lane device would work as all lanes would remain powered). Correct the definitions. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-3-maxime@cerno.tech
2020-12-07drm/vc4: drv: Remove the DSI pointer in vc4_drvMaxime Ripard
That pointer isn't used anywhere, so there's no point in keeping it. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201203132543.861591-2-maxime@cerno.tech
2020-12-07drm/vc4: hdmi: Don't poll for the infoframes status on setupMaxime Ripard
The infoframes are sent at a regular interval as a data island packet, so we don't need to wait for them to be sent when we're setting them up. However, we do need to poll when we're enabling since the we can't update the packet RAM until it has been sent. Let's add a boolean flag to tell whether we want to poll or not to support both cases. Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203074624.721559-1-maxime@cerno.tech
2020-11-30drm/cma-helper: Implement mmap as GEM CMA object functionsThomas Zimmermann
The new GEM object function drm_gem_cma_mmap() sets the VMA flags and offset as in the old implementation and immediately maps in the buffer's memory pages. Changing CMA helpers to use the GEM object function allows for the removal of the special implementations for mmap and gem_prime_mmap callbacks. The regular functions drm_gem_mmap() and drm_gem_prime_mmap() are now used. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201123115646.11004-3-tzimmermann@suse.de
2020-11-30drm/cma-helper: Remove prime infix from GEM object functionsThomas Zimmermann
These functions are not directly related to PRIME interfaces any longer, but are now GEM object functions. Rename them accordingly and fix the docs. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201123115646.11004-2-tzimmermann@suse.de
2020-11-23drm/vc4: kms: Don't disable the muxing of an active CRTCMaxime Ripard
The current HVS muxing code will consider the CRTCs in a given state to setup their muxing in the HVS, and disable the other CRTCs muxes. However, it's valid to only update a single CRTC with a state, and in this situation we would mux out a CRTC that was enabled but left untouched by the new state. Fix this by setting a flag on the CRTC state when the muxing has been changed, and only change the muxing configuration when that flag is there. Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201120144245.398711-3-maxime@cerno.tech
2020-11-23drm/vc4: kms: Store the unassigned channel list in the stateMaxime Ripard
If a CRTC is enabled but not active, and that we're then doing a page flip on another CRTC, drm_atomic_get_crtc_state will bring the first CRTC state into the global state, and will make us wait for its vblank as well, even though that might never occur. Instead of creating the list of the free channels each time atomic_check is called, and calling drm_atomic_get_crtc_state to retrieve the allocated channels, let's create a private state object in the main atomic state, and use it to store the available channels. Since vc4 has a semaphore (with a value of 1, so a lock) in its commit implementation to serialize all the commits, even the nonblocking ones, we are free from the use-after-free race if two subsequent commits are not ran in their submission order. Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201120144245.398711-2-maxime@cerno.tech
2020-11-20drm: Pass the full state to connectors atomic functionsMaxime Ripard
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Now that the CRTCs have been converted, let's move forward with the connectors to provide a consistent interface. The conversion was done using the coccinelle script below, and built tested on all the drivers. @@ identifier connector, connector_state; @@ struct drm_connector_helper_funcs { ... struct drm_encoder* (*atomic_best_encoder)(struct drm_connector *connector, - struct drm_connector_state *connector_state); + struct drm_atomic_state *state); ... } @@ identifier connector, connector_state; @@ struct drm_connector_helper_funcs { ... void (*atomic_commit)(struct drm_connector *connector, - struct drm_connector_state *connector_state); + struct drm_atomic_state *state); ... } @@ struct drm_connector_helper_funcs *FUNCS; identifier state; identifier connector, connector_state; identifier f; @@ f(..., struct drm_atomic_state *state, ...) { <+... - FUNCS->atomic_commit(connector, connector_state); + FUNCS->atomic_commit(connector, state); ...+> } @@ struct drm_connector_helper_funcs *FUNCS; identifier state; identifier connector, connector_state; identifier var, f; @@ f(struct drm_atomic_state *state, ...) { <+... - var = FUNCS->atomic_best_encoder(connector, connector_state); + var = FUNCS->atomic_best_encoder(connector, state); ...+> } @ connector_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_connector_helper_funcs helpers = { ..., .atomic_best_encoder = func, ..., }; | static struct drm_connector_helper_funcs helpers = { ..., .atomic_commit = func, ..., }; ) @@ identifier connector_atomic_func.func; identifier connector; symbol state; @@ func(struct drm_connector *connector, - struct drm_connector_state *state + struct drm_connector_state *connector_state ) { ... - state + connector_state ... } @ ignores_state @ identifier connector_atomic_func.func; identifier connector, connector_state; @@ func(struct drm_connector *connector, struct drm_connector_state *connector_state) { ... when != connector_state } @ adds_state depends on connector_atomic_func && !ignores_state @ identifier connector_atomic_func.func; identifier connector, connector_state; @@ func(struct drm_connector *connector, struct drm_connector_state *connector_state) { + struct drm_connector_state *connector_state = drm_atomic_get_new_connector_state(state, connector); ... } @ depends on connector_atomic_func @ identifier connector_atomic_func.func; identifier connector_state; identifier connector; @@ func(struct drm_connector *connector, - struct drm_connector_state *connector_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201118094758.506730-1-maxime@cerno.tech
2020-11-19drm/vc4: hdmi: Disable Wifi FrequenciesMaxime Ripard
There's cross-talk on the RPi4 between the 2.4GHz channels used by the WiFi chip and some resolutions, most notably 1440p at 60Hz. In such a case, we can either reject entirely the mode, or lower slightly the pixel frequency to remove the overlap. Let's go for the latter. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201029134018.1948636-2-maxime@cerno.tech
2020-11-19drm/vc4: kms: Document the muxing corner casesMaxime Ripard
We've had a number of muxing corner-cases with specific ways to reproduce them, so let's document them to make sure they aren't lost and introduce regressions later on. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201105135656.383350-6-maxime@cerno.tech
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 23:36:54 +0000