summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/sun4i
AgeCommit message (Collapse)Author
2018-01-11drm/sun4i: hdmi: Check for unset best_parent in sun4i_tmds_determine_rateJonathan Liu
It is possible that if there is no exact rate match and "rounded = clk_hw_round_rate(parent, ideal)" gives high enough values (e.g. if rounded is 2 * ideal) that the condition "abs(rate - rounded / i) < abs(rate - best_parent / best_div)" is never met and best_parent is never set. This results in req->rate and req->best_parent_rate being assigned 0. To avoid this, we set best_parent to the first calculated rate if it is unset. The sun4i_tmds_calc_divider function already has a similar check. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180109020323.11852-2-net147@gmail.com
2017-12-20drm/sun4i: hdmi: Move the mode_valid callback to the encoderMaxime Ripard
When attached to the connector, the mode_valid callback will only filter the modes provided by the connector itself as part of its probe. However, it will not be doing it when the mode is provided by the userspace, which still might result in a broken configuration. In order to enforce these constraints, move our mode_valid callback to the encoder which doesn't have this behaviour. Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [maxime: Wrote the commit log in order to update the patch from the merged v3 to the v4 that was correct.] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/0fa230a8-d01d-561a-f74f-6b4fd421255b@xs4all.nl
2017-12-19drm/sun4i: Fix error path handlingMaxime Ripard
The commit 4c7f16d14a33 ("drm/sun4i: Fix TCON clock and regmap initialization sequence") moved a bunch of logic around, but forgot to update the gotos after the introduction of the err_free_dotclock label. It means that if we fail later that the one introduced in that commit, we'll just to the old label which isn't free the clock we created. This will result in a breakage as soon as someone tries to do something with that clock, since its resources will have been long reclaimed. Cc: <stable@vger.kernel.org> Fixes: 4c7f16d14a33 ("drm/sun4i: Fix TCON clock and regmap initialization sequence") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/f83c1cebc731f0b4251f5ddd7b38c718cd79bb0b.1512662253.git-series.maxime.ripard@free-electrons.com
2017-12-15drm/sun4i: validate modes for HDMIHans Verkuil
When I connected my cubieboard running 4.15-rc1 to my 4k display I got no picture. Some digging found that there is no check against the upper pixelclock limit of the HDMI output, so X selects a 4kp60 format at 594 MHz, which obviously won't work. The patch below adds a check for the upper bound of what this hardware can do, and it checks if the requested tmds clock can be obtained. It also allows for the +/- 0.5% pixel clock variation that the HDMI spec permits. That code is based on commit 22d0be2a557e ("drm: arcpgu: Allow some clock deviation in crtc->mode_valid() callback") from Jose Abreu for drm/arc. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Thanks-to: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/162854cb-c7bd-d9ce-9fa0-9a6cd89c621b@xs4all.nl
2017-11-15Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17drm/sun4i: Add support for A20 display pipeline componentsJonathan Liu
The A20 display pipeline has 2 frontends, 2 backends, and 2 TCONs. This patch adds support (or a compatible string in the frontend's case) for these components. The TCONs support directly outputting to CPU/RGB/LVDS LCD panels, or it can output to HDMI via an on-chip HDMI controller, or CVBS/YPbPr/VGA signals via on-chip TV encoders. These additional encoders are not covered in this patch. Signed-off-by: Jonathan Liu <net147@gmail.com> [wens@csie.org: Expand commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-6-wens@csie.org
2017-10-17drm/sun4i: Add support for A10 display pipeline componentsChen-Yu Tsai
The A10 display pipeline has 2 frontends, 2 backends, and 2 TCONs. This patch adds support (or a compatible string in the frontend's case) for these components. The TCONs support directly outputting to CPU/RGB/LVDS LCD panels, or it can output to HDMI via an on-chip HDMI controller, or CVBS/YPbPr/VGA signals via on-chip TV encoders. These additional encoders are not covered in this patch. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-5-wens@csie.org
2017-10-17drm/sun4i: hdmi: Support HDMI controller on A10Chen-Yu Tsai
The HDMI controller in the A10 SoC is the same as the one currently supported in the A10s. It has slightly different setup parameters. Since these parameters are not thoroughly understood, we add support for this variant by copying these parameters verbatim. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-4-wens@csie.org
2017-10-17drm/sun4i: tcon: Add support for A10 TCONJonathan Liu
The A10 has two TCONs that are similar to the ones found on other SoCs. Like the A31, TCON0 has a register used to mux the TCON outputs to the downstream encoders. The bit fields are slightly different. Signed-off-by: Jonathan Liu <net147@gmail.com> [wens@csie.org: Reworked for A10 and fixed up commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-3-wens@csie.org
2017-10-17drm/sun4i: backend: Support output muxingChen-Yu Tsai
The backend has a mux to select the destination of the data to output to. It can select the TCON or the frontends. On the A20, it includes an option to output to the second TCON. This is not documented in the user manual, but the vendor kernel uses it nevertheless, so the second backend outputs to the second TCON. Although the muxing can be changed on the fly, DRM needs to be able to group a bunch of layers such that they get switched to another crtc together. This is because the display backend does the layer compositing, while the TCON generates the display timings. This constraint is not supported by DRM. Here we simply pair up backends and TCONs with the same ID. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-2-wens@csie.org
2017-10-17drm/sun4i: tcon: Move out the tcon0 common setupMaxime Ripard
Some channel0 setup has to be done, no matter what the output interface is (RGB, CPU, LVDS). Move that code into a common function in order to avoid duplication. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/183100/
2017-10-17drm/sun4i: tcon: Don't rely on encoders to set the TCON modeMaxime Ripard
Just like we did for the TCON enable and disable, for historical reasons we used to rely on the encoders calling the TCON mode_set function, while the CRTC has a callback for that. Let's implement it in order to reduce the boilerplate code. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/faa3a4d511039af1d116270dfef3a8b60ca3591e.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: tcon: Don't rely on encoders to enable the TCONMaxime Ripard
So far, we've required all the TCON-connected encoders to call the TCON enable and disable functions. This was made this way because in the RGB/LVDS case, the TCON is the CRTC and the encoder. However, in all the other cases (HDMI, TV, DSI, etc.), we have another encoder down the road that needs to be programmed. We also needed to know which channel the encoder is connected to, which is encoder-specific. The CRTC's enable and disable callbacks can work just fine for our use case, and we can get the channel to use just by looking at the type of encoder, since that is fixed. Implement those callbacks, which will remove some of the encoder boilerplate. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/90b4396e19b3eca61b2ebfdae0672074b88ad74d.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: tcon: Make tcon_get_clk_delay mode argument constMaxime Ripard
The drm_display_mode pointer can be mark const, so let's do it. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/e6f92f126640aa6de639386f9b4677db3d8bb37b.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: tcon: Make tcon_set_mux mode argument constMaxime Ripard
The drm_display_mode pointer can be mark const, so let's do it. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/b0cce5a43fc3b56953d21a54fc3c14672f755f42.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: Realign Makefile padding and reorder itMaxime Ripard
Some options were not padded as they should, and the order in the Makefile was chaotic. Fix that. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/9410b284ec97453fa692537dffaaa4fb4833347c.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: Implement endpoint parsing using kfifoMaxime Ripard
The commit da82b8785eeb ("drm/sun4i: add components in breadth first traversal order") implemented a breadth first traversal of our device tree nodes graph. However, it was relying on the kernel linked lists, and those are not really safe for addition. Indeed, in a single pipeline stage, your first stage (ie, the mixer or fronted) will be queued, and it will be the final iteration of that list as far as list_for_each_entry_safe is concerned. Then, during that final iteration, we'll queue another element (the TCON or the backend) that list_for_each_entry_safe will not account for, and we will leave the loop without having iterated over all the elements. And since we won't have built our components list properly, the DRM driver will be left non-functional. We can instead use a kfifo to queue and enqueue components in-order, as was the original intention. This also has the benefit of removing any dynamic allocation, making the error handling path simpler too. The only thing we're losing is the ability to tell whether an element has already been queued, but that was only needed to remove spurious logs, and therefore purely cosmetic. This means that this commit effectively reverses e8afb7b67fba ("drm/sun4i: don't add components that are already in the queue"). Fixes: da82b8785eeb ("drm/sun4i: add components in breadth first traversal order") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/4ecb323e787918208f6a5d9f0ebba12c62583c98.1508231063.git-series.maxime.ripard@free-electrons.com
2017-10-17drm/sun4i: backend: Offset layer buffer address by DRAM starting addressChen-Yu Tsai
The display backend, as well as other peripherals that have a DRAM clock gate and access DRAM directly, bypassing the system bus, address the DRAM starting from 0x0, while physical addresses the system uses starts from 0x40000000 (or 0x20000000 in A80's case). This issue was witnessed on the Cubietruck, which has 2GB of RAM. Devices with less RAM function normally due to the DRAM address wrapping around. CMA seems to always allocate its buffer at a very high address, close to the end of DRAM. On a 1GB RAM device, the physical address would be something like 0x78000000. The DRAM address 0x78000000 would access the same DRAM region as 0x38000000 on a system, as the DRAM address would only span 0x0 ~ 0x3fffffff. The bit 0x40000000 is non-functional in this case. However on the Cubietruck, the DRAM is 2GB. The physical address is 0x40000000 ~ 0xbfffffff. The buffer would be something like 0xb8000000. But the DRAM address span 0x0 ~ 0x7fffffff, meaning the buffer address wraps around to 0x38000000, which is wrong. The correct DRAM address for it should be 0x78000000. Correct the address configured into the backend layer registers by PHYS_OFFSET to account for this. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171017042349.31743-6-wens@csie.org
2017-10-16drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set functionChen-Yu Tsai
Initially we configured the PAD_CTRL1 register at probe/bind time. However it seems the HDMI controller will modify some of the bits in this register by itself. On the A10 it is particularly annoying as it toggles the output invert bits, which inverts the colors on the display output. The U-boot driver this driver is based on sets this register twice, though it seems it's only needed for actual display output. Hence we move it to the mode_set function. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-8-wens@csie.org
2017-10-16drm/sun4i: hdmi: Document PAD_CTRL1 output invert bitsChen-Yu Tsai
While debugging inverted color from the HDMI output on the A10, I found that the lowest 3 bits were set. These were cleared on A20 boards that had normal display output. By manually toggling these bits the mapping of the color components to these bits was found. While these are not used anywhere, it would be nice to document them somewhere. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-7-wens@csie.org
2017-10-16drm/sun4i: backend: Add comment explaining why registers are clearedChen-Yu Tsai
Many of the backend's layer configuration registers have undefined default values. This poses a risk as we use regmap_update_bits in some places, and don't overwrite the whole register. At probe/bind time we explicitly clear all the control registers by writing 0 to them. This patch adds a more detailed explanation on why we're doing this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-5-wens@csie.org
2017-10-16drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memoryChen-Yu Tsai
Commit 4636ce93d5b2 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()") adds a new helper, which covers fetching a drm_framebuffer's GEM object and calculating the buffer address for a given plane. This patch uses this helper to replace our own open coded version of the same function. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-4-wens@csie.org
2017-10-16drm/sun4i: backend: Create regmap after access is possibleChen-Yu Tsai
The backend has various clocks and reset controls that need to be enabled and deasserted before register access is possible. Move the creation of the regmap to after the clocks and reset controls have been configured where it makes more sense. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-3-wens@csie.org
2017-10-16drm/sun4i: don't add components that are already in the queueChen-Yu Tsai
Even though the components framework can handle duplicate entries, the extra entries cause a lot more debug messages to be generated, which would be confusing to developers not familiar with our driver and the framework in general. Instead, we can scan the relatively small queue and check if the component to be added is already queued up. Since the display pipelines are symmetrical (not considering the third display pipeline on the A80), and we add components level by level, when we get to the second instance at the same level, any shared downstream components would already be in the queue. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-2-wens@csie.org
2017-10-11drm/sun4i: hdmi: Add support for A31's HDMI controllerChen-Yu Tsai
The HDMI controller found in the A31 SoCs is slightly different from the one already supported, which is found in the A10s: - Need different initial values for the PLL related registers - Different behavior of the DDC and TMDS clocks - Different register layout for the DDC portion - Separate DDC parent clock This patch adds support for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-10-wens@csie.org
2017-10-11drm/sun4i: hdmi: Add A31 specific DDC register definitionsChen-Yu Tsai
The DDC block for the HDMI controller is different on the A31. This patch adds the register definitions. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-9-wens@csie.org
2017-10-11drm/sun4i: hdmi: Add support for controller hardware variantsChen-Yu Tsai
The HDMI controller found in earlier Allwinner SoCs have slight differences between the A10, A10s, and the A31: - Need different initial values for the PLL related registers - Different behavior of the DDC and TMDS clocks - Different register layout for the DDC portion - Separate DDC parent clock on the A31 - Explicit reset control For the A31, the HDMI TMDS clock has a different value offset for the divider. The HDMI DDC block is different from the one in the other SoCs. As far as the DDC clock goes, it has no pre-divider, as it is clocked from a slower parent clock, not the TMDS clock. The divider offset from the register value is different. And the clock control register is at a different offset. A new variant data structure is created to store pointers to the above functions, structures, and the different initial values. Another flag notates whether there is a separate DDC parent clock. If not, the TMDS clock is passed to the DDC clock create function, as before. Regmap fields are used to deal with the different register layout of the DDC block. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-8-wens@csie.org
2017-10-11drm/sun4i: hdmi: Allow using second PLL as TMDS clk parentChen-Yu Tsai
On SoCs with two display pipelines, it is possible that the two pipelines are active at the same time, with potentially incompatible dot clocks. Let the HDMI encoder's TMDS clock go through all of its parents when calculating possible clock rates. This allows usage of the second video PLL as its parent. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-6-wens@csie.org
2017-10-11drm/sun4i: hdmi: create a regmap for later useChen-Yu Tsai
The HDMI driver is written with readl/writel I/O to the registers. However, to support the A31 variant, which has a different layout for the DDC registers, it was recommended to use regfields to have a cleaner implementation. To use regfields, we need to create an underlying regmap. This patch only adds the regmap. It does not convert the existing driver accesses to use regmap. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-5-wens@csie.org
2017-10-11drm/sun4i: hdmi: Disable clks in bind function error path and unbind functionChen-Yu Tsai
The HDMI driver enables the bus and mod clocks in the bind function, but does not disable them if it then bails our due to any errors. Neither does it disable the clocks in the unbind function. Fix this by adding a proper error path to the bind function, and clk_disable_unprepare calls to the unbind function. Also rename the err_cleanup_connector label to err_cleanup_encoder, since it is the encoder that gets cleaned up. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-4-wens@csie.org
2017-10-11drm/sun4i: tcon: Add support for demuxing TCON output on A31Chen-Yu Tsai
On systems with 2 TCONs such as the A31, it is possible to demux the output of the TCONs to one encoder. Add support for this for the A31. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-3-wens@csie.org
2017-10-11drm/sun4i: tcon: Add variant callback for TCON output muxingChen-Yu Tsai
Different SoCs have different muxing options and values for the TCON outputs. Instead of stuffing every possibility in sun4i_tcon_set_mux(), add a callback pointer to sun4i_tcon_quirks that each TCON variant can use to provide muxing support. The current muxing options in sun4i_tcon_set_mux() for sun5i-a13 are moved to a new sun5i-specific callback function. Since the new callback replaces what the .has_unknown_mux field in tcon quirks did in the past, the field is removed. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-2-wens@csie.org
2017-10-03Merge airlied/drm-next into drm-misc-nextDaniel Vetter
Just catching up with upstream. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-10-03BackMerge tag 'v4.14-rc3' into drm-nextDave Airlie
Linux 4.14-rc3 Requested by Daniel for the tracing build fix in fixes.
2017-10-02drm/sun4i: hdmi: Disable clks in bind function error path and unbind functionChen-Yu Tsai
The HDMI driver enables the bus and mod clocks in the bind function, but does not disable them if it then bails our due to any errors. Neither does it disable the clocks in the unbind function. Fix this by adding a proper error path to the bind function, and clk_disable_unprepare calls to the unbind function. Also rename the err_cleanup_connector label to err_cleanup_encoder, since it is the encoder that gets cleaned up. Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170929082306.16193-6-wens@csie.org
2017-10-01drm/sun4i: Use drm_gem_fb_create()Noralf Trønnes
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1506255985-61113-9-git-send-email-noralf@tronnes.org
2017-09-28Merge tag 'drm-misc-next-2017-09-20' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next UAPI Changes: Cross-subsystem Changes: Core Changes: - DP SDP defines (Ville) - polish for scdc helpers (Thierry Reding) - fix lifetimes for connector/plane state across crtc changes (Maarten Lankhorst). - sparse fixes (Ville+Thierry) - make legacy kms ioctls all interruptible (Maarten) - push edid override into the edid helpers (out of probe helpers) (Jani) - DP ESI defines for link status (DK) Driver Changes: - drm-panel is now in drm-misc! - minor panel-simple cleanups/refactoring by various folks - drm_bridge_add cleanup (Inki Dae) - constify a few i2c_device_id structs (Arvind Yadav) - More patches from Noralf's fb/gem helper cleanup - bridge/synopsis: reset fix (Philippe Cornu) - fix tracepoint include handling in drivers (Thierry) - rockchip: lvds support (Sandy Huang) - move sun4i into drm-misc fold (Maxime Ripard) - sun4i: refactor driver load + support TCON backend/layer muxing (Chen-Yu Tsai) - pl111: support more pl11x variants (Linus Walleij) - bridge/adv7511: robustify probing/edid handling (Lars-Petersen Clausen) New hw support: - S6E63J0X03 panel (Hoegeun Kwon) - OTM8009A panel (Philippe CORNU) - Seiko 43WVF1G panel (Marco Franchi) - tve200 driver (Linus Walleij) Plus assorted of tiny patches all over, including our first outreachy patches from applicants for the winter round! * tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits) drm: add backwards compatibility support for drm_kms_helper.edid_firmware drm: handle override and firmware EDID at drm_do_get_edid() level drm/dp: DPCD register defines for link status within ESI field drm/rockchip: Replace dev_* with DRM_DEV_* drm/tinydrm: Drop driver registered message drm/gem-fb-helper: Use debug message on gem lookup failure drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb() drm/bridge: adv7511: Constify HDMI CODEC platform data drm/bridge: adv7511: Enable connector polling when no interrupt is specified drm/bridge: adv7511: Remove private copy of the EDID drm/bridge: adv7511: Properly update EDID when no EDID was found drm/crtc: Convert setcrtc ioctl locking to interruptible. drm/atomic: Convert pageflip ioctl locking to interruptible. drm/legacy: Convert setplane ioctl locking to interruptible. drm/legacy: Convert cursor ioctl locking to interruptible. drm/atomic: Convert atomic ioctl locking to interruptible. drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2. drm/tve200: Clean up panel bridging drm/doc: Update todo.rst drm/dp/mst: Sideband message transaction to power up/down nodes ...
2017-09-22drm/sun4i: cec: Enable back CEC-pin frameworkHans Verkuil
Now that the cec-pin framework has been merged, we can remove the safeguard that were preventing the CEC part of the sun4i HDMI driver and actually start to use it. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-09-09drm/sun4i: call drm_vblank_init with correct number of crtcsChen-Yu Tsai
If we want to have vblank on both pipelines at the same time, we need to call drm_vblank_init with num_crtcs = 2. Instead, since the crtc init calls correctly set mode_config.num_crtc, we can move the drm_vblank_init call to after the crtc init code is called, which is the component bind part. Then we can just pass mode_config.num_crtc in. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-8-wens@csie.org
2017-09-09drm/sun4i: tcon: Support backend input muxChen-Yu Tsai
The TCON has a mux to select the source of the data to display. This mux includes selecting the display backends. On the A31, which has two display pipelines, this mux can let the TCON select either backend as its data source. Although the muxing can be changed on the fly, DRM needs to be able to group a bunch of layers such that they get switched to another crtc together. This is because the display backend does the layer compositing, while the TCON generates the display timings. This constraint is not supported by DRM. Here we simply pair up backends and TCONs with the same ID. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-7-wens@csie.org
2017-09-09drm/sun4i: tcon: Simplify sun4i_tcon_find_engine_traverse for one inputChen-Yu Tsai
Now that sun4i_tcon_find_engine_traverse() usage is restricted to the single input case, we can remove the for_each_available_child_of_node loop. While at it, consolidate all the of_node_put calls into a common exit path. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-6-wens@csie.org
2017-09-09drm/sun4i: tcon: get TCON ID and matching engine with remote endpoint IDChen-Yu Tsai
The device tree binding for sun4i-drm says: For all connections between components up to the TCONs in the display pipeline, when there are multiple components of the same type at the same depth, the local endpoint ID must be the same as the remote component's index. For example, if the remote endpoint is Frontend 1, then the local endpoint ID must be 1. We should be able to get the TCON's ID directly from any of the remote endpoints from its input port. With the ID, we can then go through the list of registered engines and find a matching one by ID. However the A31 device tree is incorrect. We assumed that there were no cross pipeline connections between the backends and TCONs. As a result, in all the endpoints between the backends and TCONs of the second display pipeline, the endpoint IDs were incorrectly set to 0, when in fact they should've been set to 1. To maintain compatibility with this incorrect device tree, we first check if the TCON's input port has 1 or many endpoints. If there are more than 1, then it is likely a fixed version, and we can proceed with the new method. If there is only 1 endpoint, then it is possibly an incorrect version, or it could be the SoC only has one pipeline. In either case we fall back to using the old method of traversing the input connections to find a matching engine, and then get its ID. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-5-wens@csie.org
2017-09-09drm/sun4i: tcon: Check for multiple paths between TCONs and backendsChen-Yu Tsai
The patch b317fa3ba11a ("drm/sun4i: tcon: Find matching display backend by device node matching") assumed a one-to-one mapping between TCONs and backends. This turned out wrong, as we found muxing controls in the TCON of the A31, and undocumented usage of the backend output selector of the A20. Make sun4i_tcon_find_engine() bail out if the current node has multiple input connections. Fixes: b317fa3ba11a ("drm/sun4i: tcon: Find matching display backend by device node matching") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-4-wens@csie.org
2017-09-09drm/sun4i: add components in breadth first traversal orderChen-Yu Tsai
The encoder drivers use drm_of_find_possible_crtcs to get upstream crtcs from the device tree using of_graph. For the results to be correct, encoders must be probed/bound after _all_ crtcs have been created. The existing code uses a depth first recursive traversal of the of_graph, which means the encoders downstream of the TCON get add right after the first TCON. The second TCON or CRTC will never be properly associated with encoders connected to it. Other platforms, such as Rockchip, deal with this by probing all CRTCs first, then all subsequent components. This is easy to do since the CRTCs correspond to just one device node, and are the first nodes in the pipeline. However with Allwinner SoCs, the function of the CRTC is split between the display backend (DE 1.0) or mixer (DE 2.0), which does scan-out and compositing, and the TCON, which generates the display timing signals. Further complicating the process, there may be a Dynamic Range Controller between the backend and the TCON. Also, the backend is preceded by the frontend, with a Display Enhancement Unit possibly in between. In a dual display pipeline setup, both frontends can feed either backend, and both backends can feed either TCON. We want all components of the same type to be added before the next type in the pipeline. Fortunately, the pipelines are perfectly symmetric, i.e. components of the same type are at the same depth when counted from the frontend. The only exception is the third pipeline in the A80 SoC, which we do not support anyway. Hence we can use a breadth first search traversal order to add components. We do not need to check for duplicates. The component matching system handles this for us. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170908075016.18657-3-wens@csie.org
2017-09-08drm/sun4i: tcon: Unconditionally reset the TCONChen-Yu Tsai
When binding the TCON, we were checking the reset control status and asserting reset if it wasn't in reset. The check failed to account for the reset control API returning error codes if the status callback was not implemented. Since we want the TCON to be reset in all cases, use reset_control_reset to force a reset instead. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170908090016.32224-1-wens@csie.org
2017-09-03Merge tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.14 merge window. I'm sending this early, as my continuing journey into fatherhood is occurring really soon now, I'm going to be mostly useless for the next couple of weeks, though I may be able to read email, I doubt I'll be doing much patch applications or git sending. If anything urgent pops up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards you. Outside drm changes: Some rcar-du updates that touch the V4L tree, all acks should be in place. It adds one export to the radix tree code for new i915 use case. There are some minor AGP cleanups (don't see that too often). Changes to the vbox driver in staging to avoid breaking compilation. Summary: core: - Atomic helper fixes - Atomic UAPI fixes - Add YCBCR 4:2:0 support - Drop set_busid hook - Refactor fb_helper locking - Remove a bunch of internal APIs - Add a bunch of better default handlers - Format modifier/blob plane property added - More internal header refactoring - Make more internal API names consistent - Enhanced syncobj APIs (wait/signal/reset/create signalled) bridge: - Add Synopsys Designware MIPI DSI host bridge driver tiny: - Add Pervasive Displays RePaper displays - Add support for LEGO MINDSTORMS EV3 LCD i915: - Lots of GEN10/CNL support patches - drm syncobj support - Skylake+ watermark refactoring - GVT vGPU 48-bit ppgtt support - GVT performance improvements - NOA change ioctl - CCS (color compression) scanout support - GPU reset improvements amdgpu: - Initial hugepage support - BO migration logic rework - Vega10 improvements - Powerplay fixes - Stop reprogramming the MC - Fixes for ACP audio on stoney - SR-IOV fixes/improvements - Command submission overhead improvements amdkfd: - Non-dGPU upstreaming patches - Scratch VA ioctl - Image tiling modes - Update PM4 headers for new firmware - Drop all BUG_ONs. nouveau: - GP108 modesetting support. - Disable MSI on big endian. vmwgfx: - Add fence fd support. msm: - Runtime PM improvements exynos: - NV12MT support - Refactor KMS drivers imx-drm: - Lock scanout channel to improve memory bw - Cleanups etnaviv: - GEM object population fixes tegra: - Prep work for Tegra186 support - PRIME mmap support sunxi: - HDMI support improvements - HDMI CEC support omapdrm: - HDMI hotplug IRQ support - Big driver cleanup - OMAP5 DSI support rcar-du: - vblank fixes - VSP1 updates arcgpu: - Minor fixes stm: - Add STM32 DSI controller driver dw_hdmi: - Add support for Rockchip RK3399 - HDMI CEC support atmel-hlcdc: - Add 8-bit color support vc4: - Atomic fixes - New ioctl to attach a label to a buffer object - HDMI CEC support - Allow userspace to dictate rendering order on submit ioctl" * tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits) drm/syncobj: Add a signal ioctl (v3) drm/syncobj: Add a reset ioctl (v3) drm/syncobj: Add a syncobj_array_find helper drm/syncobj: Allow wait for submit and signal behavior (v5) drm/syncobj: Add a CREATE_SIGNALED flag drm/syncobj: Add a callback mechanism for replace_fence (v3) drm/syncobj: add sync obj wait interface. (v8) i915: Use drm_syncobj_fence_get drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2) drm/syncobj: Rename fence_get to find_fence drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate drm/vmwgfx: Bump the version for fence FD support drm/vmwgfx: Add export fence to file descriptor support drm/vmwgfx: Add support for imported Fence File Descriptor drm/vmwgfx: Prepare to support fence fd drm/vmwgfx: Fix incorrect command header offset at restart drm/vmwgfx: Support the NOP_ERROR command drm/vmwgfx: Restart command buffers after errors drm/vmwgfx: Move irq bottom half processing to threads drm/vmwgfx: Don't use drm_irq_[un]install ...
2017-08-25Merge tag 'sunxi-drm-for-4.14-2' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next sun4i DRM changes for 4.14, take 2 A single patch switching to a new OF helper. * tag 'sunxi-drm-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: drm/sun4i: use of_graph_get_remote_endpoint()
2017-08-23drm/sun4i: use of_graph_get_remote_endpoint()Kuninori Morimoto
Now, we can use of_graph_get_remote_endpoint(). Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-21Merge tag 'sunxi-drm-for-4.14' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next Allwinner DRM changes for 4.14 A few changes, but most notably improving the HDMI support merged in 4.13, by reporting the DDC adapter as an i2c bus, and by adding CEC support through the CEC framework. * tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: sun4i_hdmi: add CEC support dt-bindings: display: sunxi: Improve endpoint ID scheme readability drm/sun4i: tcon: remove unused function drm/sun4i: Remove useless atomic_check drm/sun4i: Add if statement instead of depends on drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus drm/sun4i: constify drm_plane_helper_funcs