summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/sun4i/sun4i_tcon.c
AgeCommit message (Collapse)Author
2019-11-27Merge tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Lots of stuff in here, though it hasn't been too insane this merge apart from dealing with the security fun. uapi: - export different colorspace properties on DP vs HDMI - new fourcc for ARM 16x16 block format - syncobj: allow querying last submitted timeline value - DRM_FORMAT_BIG_ENDIAN defined as unsigned core: - allow using gem vma manager in ttm - connector/encoder/bridge doc fixes - allow more than 3 encoders for a connector - displayport mst suspend/resume reprobing support - vram lazy unmapping, uniform vram mm and gem vram - edid cleanups + AVI informframe bar info - displayport helpers - dpcd parser added dp_cec: - Allow a connector to be associated with a cec device ttm: - pipelining with no_gpu_wait fix - always keep BOs on the LRU sched: - allow free_job routine to sleep i915: - Block userptr from mappable GTT - i915 perf uapi versioning - OA stream dynamic reconfiguration - make context persistence optional - introduce DRM_I915_UNSTABLE Kconfig - add fake lmem testing under unstable - BT.2020 support for DP MSA - struct mutex elimination - Tigerlake display/PLL/power management improvements - Jasper Lake PCH support - refactor PMU for multiple GPUs - Icelake firmware update - Split out vga + switcheroo code amdgpu: - implement dma-buf import/export without helpers - vega20 RAS enablement - DC i2c over aux fixes - renoir GPU reset - DC HDCP support - BACO support for CI/VI asics - MSI-X support - Arcturus EEPROM support - Arcturus VCN encode support - VCN dynamic powergating on RV/RV2 amdkfd: - add navi12/14/renoir support to kfd radeon: - SI dpm fix ported from amdgpu - fix bad DMA on ppc platforms gma500: - memory leak fixes qxl: - convert to new gem mmap exynos: - build warning fix komeda: - add aclk sysfs attribute v3d: - userspace cleanup uapi change i810: - fix for underflow in dispatch ioctls ast: - refactor show_cursor mgag200: - refactor show_cursor arcgpu: - encoder finding improvements mediatek: - mipi_tx, dsi and partial crtc support for MT8183 SoC - rotation support meson: - add suspend/resume support omap: - misc refactors tegra: - DisplayPort support for Tegra 210, 186 and 194. - IOMMU-backed DMA API fixes panfrost: - fix lockdep issue - simplify devfreq integration rcar-du: - R8A774B1 SoC support - fixes for H2 ES2.0 sun4i: - vcc-dsi regulator support virtio-gpu: - vmexit vs spinlock fix - move to gem shmem helpers - handle large command buffers with cma" * tag 'drm-next-2019-11-27' of git://anongit.freedesktop.org/drm/drm: (1855 commits) drm/amdgpu: invalidate mmhub semaphore workaround in gmc9/gmc10 drm/amdgpu: initialize vm_inv_eng0_sem for gfxhub and mmhub drm/amd/amdgpu/sriov skip RLCG s/r list for arcturus VF. drm/amd/amdgpu/sriov temporarily skip ras,dtm,hdcp for arcturus VF drm/amdgpu/gfx10: re-init clear state buffer after gpu reset merge fix for "ftrace: Rework event_create_dir()" drm/amdgpu: Update Arcturus golden registers drm/amdgpu/gfx10: fix out-of-bound mqd_backup array access drm/amdgpu/gfx10: explicitly wait for cp idle after halt/unhalt Revert "drm/amd/display: enable S/G for RAVEN chip" drm/amdgpu: disable gfxoff on original raven drm/amdgpu: remove experimental flag for Navi14 drm/amdgpu: disable gfxoff when using register read interface drm/amdgpu/powerplay: properly set PP_GFXOFF_MASK (v2) drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2 drm/radeon: fix bad DMA from INTERRUPT_CNTL2 drm/amd/display: Fix debugfs on MST connectors drm/amdgpu/nv: add asic func for fetching vbios from rom directly drm/amdgpu: put flush_delayed_work at first drm/amdgpu/vcn2.5: fix the enc loop with hw fini ...
2019-11-13drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.Yunhao Tian
The datasheet of V3s (and various other chips) wrote that TCON0_DCLK_DIV can be >= 1 if only dclk is used, and must >= 6 if dclk1 or dclk2 is used. As currently neither dclk1 nor dclk2 is used (no writes to these bits), let's set minimal division to 1. If this minimal division is 6, some common dot clock frequencies can't be produced (e.g. 30MHz will not be possible and will fallback to 25MHz), which is obviously not an expected behaviour. Signed-off-by: Yunhao Tian <t123yh@outlook.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/
2019-10-03Merge drm/drm-next into drm-misc-nextMaxime Ripard
We haven't done any backmerge for a while due to the merge window, and it starts to become an issue for komeda. Let's bring 5.4-rc1 in. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2019-09-19Merge tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main pull request for 5.4-rc1 merge window. I don't think there is anything outstanding so next week should just be fixes, but we'll see if I missed anything. I landed some fixes earlier in the week but got delayed writing summary and sending it out, due to a mix of sick kid and jetlag! There are some fixes pending, but I'd rather get the main merge out of the way instead of delaying it longer. It's also pretty large in commit count and new amd header file size. The largest thing is four new amdgpu products (navi12/14, arcturus and renoir APU support). Otherwise it's pretty much lots of work across the board, i915 has started landing tigerlake support, lots of icelake fixes and lots of locking reworking for future gpu support, lots of header file rework (drmP.h is nearly gone), some old legacy hacks (DRM_WAIT_ON) have been put into the places they are needed. uapi: - content protection type property for HDCP core: - rework include dependencies - lots of drmP.h removals - link rate calculation robustness fix - make fb helper map only when required - add connector->DDC adapter link - DRM_WAIT_ON removed - drop DRM_AUTH usage from drivers dma-buf: - reservation object fence helper dma-fence: - shrink dma_fence struct - merge signal functions - store timestamps in dma_fence - selftests ttm: - embed drm_get_object struct into ttm_buffer_object - release_notify callback bridges: - sii902x - audio graph card support - tc358767 - aux data handling rework - ti-snd64dsi86 - debugfs support, DSI mode flags support panels: - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - TI nspire, NEC NL8048HL11, LG Philips LB035Q02, Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1 Toppoly TD043MTEA1 i915: - Initial tigerlake platform support - Locking simplification work, general all over refactoring. - Selftests - HDCP debug info improvements - DSI properties - Icelake display PLL fixes, colorspace fixes, bandwidth fixes, DSI suspend/resume - GuC fixes - Perf fixes - ElkhartLake enablement - DP MST fixes - GVT - command parser enhancements amdgpu: - add wipe memory on release flag for buffer creation - Navi12/14 support (may be marked experimental) - Arcturus support - Renoir APU support - mclk DPM for Navi - DC display fixes - Raven scatter/gather support - RAS support for GFX - Navi12 + Arcturus power features - GPU reset for Picasso - smu11 i2c controller support amdkfd: - navi12/14 support - Arcturus support radeon: - kexec fix nouveau: - improved display color management - detect lack of GPU power cables vmwgfx: - evicition priority support - remove unused security feature msm: - msm8998 display support - better async commit support for cursor updates etnaviv: - per-process address space support - performance counter fixes - softpin support mcde: - DCS transfers fix exynos: - drmP.h cleanup lima: - reduce logging kirin: - misc clenaups komeda: - dual-link support - DT memory regions hisilicon: - misc fixes imx: - IPUv3 image converter fixes - 32-bit RGB V4L2 pixel format support ingenic: - more support for panel related cases mgag200: - cursor support fix panfrost: - export GPU features register to userspace - gpu heap allocations - per-fd address space support pl111: - CLD pads wiring support removed from DT rockchip: - rework to use DRM PSR helpers - fix bug in VOP_WIN_GET macro - DSI DT binding rework sun4i: - improve support for color encoding and range - DDC enabled GPIO tinydrm: - rework SPI support - improve MIPI-DBI support - moved to drm/tiny vkms: - rework CRC tracking dw-hdmi: - get_eld and i2s improvements gm12u320: - misc fixes meson: - global code cleanup - vpu feature detect omap: - alpha/pixel blend mode properties rcar-du: - misc fixes" * tag 'drm-next-2019-09-18' of git://anongit.freedesktop.org/drm/drm: (2112 commits) drm/nouveau/bar/gm20b: Avoid BAR1 teardown during init drm/nouveau: Fix ordering between TTM and GEM release drm/nouveau/prime: Extend DMA reservation object lock drm/nouveau: Fix fallout from reservation object rework drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors drm/i915: Use NOEVICT for first pass on attemping to pin a GGTT mmap drm/i915: to make vgpu ppgtt notificaiton as atomic operation drm/i915: Flush the existing fence before GGTT read/write drm/i915: Hold irq-off for the entire fake lock period drm/i915/gvt: update RING_START reg of vGPU when the context is submitted to i915 drm/i915/gvt: update vgpu workload head pointer correctly drm/mcde: Fix DSI transfers drm/msm: Use the correct dma_sync calls harder drm/msm: remove unlikely() from WARN_ON() conditions drm/msm/dsi: Fix return value check for clk_get_parent drm/msm: add atomic traces drm/msm/dpu: async commit support drm/msm: async commit support drm/msm: split power control from prepare/complete_commit drm/msm: add kms->flush_commit() ...
2019-08-28drm: Stop including drm_bridge.h from drm_crtc.hBoris Brezillon
We are about to add a drm_bridge_state that inherits from drm_private_state which is defined in drm_atomic.h. Problem is, drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h, leading to "drm_private_state has incomplete type" error. Let's force all users of the drm_bridge API to explicitly include drm_bridge.h. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com
2019-08-20drm/sun4i: tcon: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: sunxi_defconfig arm): drivers/gpu/drm/sun4i/sun4i_tcon.c: In function ‘sun4i_tcon0_mode_set_dithering’: drivers/gpu/drm/sun4i/sun4i_tcon.c:318:7: warning: this statement may fall through [-Wimplicit-fallthrough=] val |= SUN4I_TCON0_FRM_CTL_MODE_B; drivers/gpu/drm/sun4i/sun4i_tcon.c:319:2: note: here case MEDIA_BUS_FMT_RGB666_1X18: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-17drm/sun4i: drop use of drmP.hSam Ravnborg
Drop use of the deprecated drmP.h header file. While touching the list of include file, use the typical order of the blocks: \#include <linux/*> \#include <video/*> \#include <drm/*> \#include "" Within each block, sort the files. Include necessary files to fix build after the drmP.h removal. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-6-sam@ravnborg.org
2019-06-24drm/sun4i: Eliminate pointless on stack copy of drm_display_infoVille Syrjälä
Just use a pointer to the display_info rather than make a copy on stack. Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326173810.11979-1-ville.syrjala@linux.intel.com Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17drm/sun4i: Make some symbols staticYueHaibing
Fix sparse warnings: drivers/gpu/drm/sun4i/sun8i_tcon_top.c:271:36: warning: symbol 'sun8i_r40_tcon_top_quirks' was not declared. Should it be static? drivers/gpu/drm/sun4i/sun8i_tcon_top.c:276:36: warning: symbol 'sun50i_h6_tcon_top_quirks' was not declared. Should it be static? drivers/gpu/drm/sun4i/sun4i_tcon.c:239:6: warning: symbol 'sun4i_tcon_set_mux' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416145855.20852-1-yuehaibing@huawei.com
2019-03-25Merge tag 'drm-misc-next-2019-03-21' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.2: UAPI Changes: - Add Colorspace connector property (Uma) - fourcc: Several new YUV formats from ARM (Brian & Ayan) - fourcc: Fix merge conflicts between new formats above and Swati's that went in via topic/hdr-formats-2019-03-07 branch (Maarten) Cross-subsystem Changes: - Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel) Core Changes: - Improve component helper documentation (Daniel) - Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf) - Add device managed (devm) drm_device init function (Noralf) - Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf) - Move MIPI/DSI rate control params computation into core from i915 (David) - Add support for shmem backed gem objects (Noralf) Driver Changes: - various: Use of_node_name_eq for node name comparisons (Rob Herring) - sun4i: Add DSI burst mode support (Konstantin) - panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin) - virtio: A few prime improvements (Gerd) - tinydrm: Remove tinydrm_device (Noralf) - vc4: Add load tracker to driver to detect underflow in atomic check (Boris) - vboxvideo: Move it out of staging \o/ (Hans) - v3d: Add support for V3D v4.2 (Eric) Cc: Konstantin Sudakov <k.sudakov@integrasources.com> Cc: Rob Herring <robh@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: David Francis <David.Francis@amd.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Eric Anholt <eric@anholt.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Ayan Kumar Halder <ayan.halder@arm.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190321170805.GA50145@art_vandelay
2019-03-18drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flagsLaurent Pinchart
The DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and DRM_BUS_FLAG_SYNC_(POS|NEG)EDGE flags are deprecated in favour of the new DRM_BUS_FLAG_PIXDATA_(DRIVE|SAMPLE)_(POS|NEG)EDGE and new DRM_BUS_FLAG_SYNC_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags. Replace them through the code. This effectively changes the value of the .sampling_edge bridge timings field in the dumb-vga-dac driver. This is safe to do as no driver consumes these values yet. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-02-19Merge drm/drm-next into drm-misc-nextMaxime Ripard
Backmerge drm-next to bring in -rc7 Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-02-19drm/sun4i: dsi: Restrict DSI tcon clock dividerMaxime Ripard
The current code allows the TCON clock divider to have a range between 4 and 127 when feeding the DSI controller. The only display supported so far had a display clock rate that ended up using a divider of 4, but testing with other displays show that only 4 seems to be functional. This also aligns with what Allwinner is doing in their BSP, so let's just hardcode that we want a divider of 4 when using the DSI output. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/074e88ae472f5e0492e26939c74b44fb4125ffbd.1549896081.git-series.maxime.ripard@bootlin.com
2019-02-18Merge v5.0-rc7 into drm-nextDave Airlie
Backmerging for nouveau and imx that needed some fixes for next pulls. Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-02-01drm/sun4i: tcon: Prepare and enable TCON channel 0 clock at initPaul Kocialkowski
When initializing clocks, a reference to the TCON channel 0 clock is obtained. However, the clock is never prepared and enabled later. Switching from simplefb to DRM actually disables the clock (that was usually configured by U-Boot) because of that. On the V3s, this results in a hang when writing to some mixer registers when switching over to DRM from simplefb. Fix this by preparing and enabling the clock when initializing other clocks. Waiting for sun4i_tcon_channel_enable to enable the clock is apparently too late and results in the same mixer register access hang. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190131132550.26355-1-paul.kocialkowski@bootlin.com
2019-01-25drm/sun4i: Add support for A23 display pipelineChen-Yu Tsai
The A23's display pipeline is similar to the A33. Differences include: - Display backend supports larger layers, 8192x8192 instead of 2048x2048 - TCON has DMA input - There is no SAT module packed in the display backend Add support for the display pipeline and its components. As the MIPI DSI output device is not officially documented, and there are no A23 reference devices to test it, it is not covered by this patch. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190125032314.20915-7-wens@csie.org
2019-01-24drm: Split out drm_probe_helper.hDaniel Vetter
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2018-11-09drm/sun4i: tcon: Support an active-low DE signal with RGB interfacePaul Kocialkowski
Some panels need an active-low data enable (DE) signal for the RGB interface. This requires flipping a bit in the TCON0 polarity register when setting up the mode for the RGB interface. Match the associated bus flag and use it to set the polarity inversion bit for the DE signal when required. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-4-contact@paulk.fr
2018-11-09drm/sun4i: tcon: Get the connector from the encoder in RGB setupPaul Kocialkowski
Features such as dithering and pixel data edge configuration currently rely on the panel registered with the TCON driver. However, bridges are also supported in addition to panels for RGB setup. Instead of retrieving the connector from the panel, get it from the encoder with the dedicated helper. Even in the case of bridges, the connector is registered with the encoder from our driver and is accessible when iterating connectors. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-3-contact@paulk.fr
2018-11-09drm/sun4i: tcon: Pass encoder to RGB setup functionPaul Kocialkowski
Passing the encoder to the TCON RGB setup functions allows accessing the connector from the encoder directly instead of relying on the panel. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107181843.27628-2-contact@paulk.fr
2018-10-08drm/sun4i: tcon: prevent tcon->panel dereference if NULLGiulio Benetti
If tcon->panel pointer is NULL, trying to dereference from it (i.e. tcon->panel->connector) will cause a null pointer dereference. Add tcon->panel null pointer check before calling sun4i_tcon0_mode_set_dithering(). Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Fixes: f11adcecbd5f ("drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com
2018-10-08drm/sun4i: tcon: fix check of tcon->panel null pointerGiulio Benetti
Since tcon->panel is a pointer returned by of_drm_find_panel() need to check if it is not NULL, hence a valid pointer. IS_ERR() instead checks return error values, not NULL pointers. Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)". Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-1-giulio.benetti@micronovasrl.com
2018-09-12drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=mMaxime Ripard
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in a link error, as we try to access a symbol from the sun8i_tcon_top.ko module: ERROR: "sun8i_tcon_top_de_config" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! ERROR: "sun8i_tcon_top_set_hdmi_src" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-tcon.ko] undefined! This solves the problem by adding a silent symbol for the tcon_top module, building it as a separate module in exactly the cases that we need it, but in a way that it is reachable by the other modules. Fixes: cf77d79b4e29 ("drm/sun4i: tcon: Add another way for matching mixers with tcon") Fixes: 0305189afb32 ("drm/sun4i: tcon: Add support for R40 TCON") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Matt Hart <matthew.hart@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180911113325.11024-1-maxime.ripard@bootlin.com
2018-09-07drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panelsJonathan Liu
The hardware supports dithering on TCON channel 0 which is used for LCD panels. Dithering is a method of approximating a color from a mixture of other colors when the required color isn't available. It reduces color banding artifacts that can be observed when displaying gradients (e.g. grayscale gradients). This may occur when the image that needs to be displayed is 24-bit but the LCD panel is a lower bit depth and does not perform dithering on its own. Signed-off-by: Jonathan Liu <net147@gmail.com> [wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-4-wens@csie.org
2018-09-07drm/sun4i: tcon: Pass drm_encoder * into sun4i_tcon0_mode_set_cpuChen-Yu Tsai
sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device * as its second parameter. This is derived from drm_encoder. The DSI encoder is tied to the CPU interface mode of the TCON as a special case. In theory, if hardware were available, we could also support normal CPU interface modes. It is better to pass the generic encoder instead of the specialized mipi_dsi_device, and handle the differences inside the function. Passing the encoder would also enable the function to pass it, or any other data structures related to it, to other functions expecting it. One such example would be dithering support that will be added in a later patch, which looks at properties tied to the connector to determine whether dithering should be enabled or not. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-2-wens@csie.org
2018-07-24drm/sun4i: tcon: Add support for R40 TCONJernej Skrabec
R40 TV TCON is basically the same as on A83T. However, it needs special handling, because it has to set up TCON TOP muxes at runtime. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-14-jernej.skrabec@siol.net
2018-07-24drm/sun4i: tcon: Add another way for matching mixers with tconJernej Skrabec
Till now, new way of matching engines with TCONs was reading their respective ids and match them by those ids. However, with introduction of TCON TOP, that might not be so straightforward anymore. - there might be more TCONs that engines (mixers) - TCON ids might have non-consecutive ids Workaround that by matching mixer id with TCON index from TCON list. For example, R40 has 2 mixers and 4 TCONs. Board designer can choose 2 outputs, which are connected to any of those 4 TCONs. As long as there are only 2 TCONs enabled in DT, using index in list as alternative id, will allow to match them with mixer 0 and 1. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-13-jernej.skrabec@siol.net
2018-07-19drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE checking if panel is used.Giulio Benetti
Handle both positive and negative dclk polarity, according to bus_flags, taking care of this: On A20 and similar SoCs, the only way to achieve Positive Edge (Rising Edge), is setting dclk clock phase to 2/3(240°). By default TCON works in Negative Edge(Falling Edge), this is why phase is set to 0 in that case. Unfortunately there's no way to logically invert dclk through IO_POL register. The only acceptable way to work, triple checked with scope, is using clock phase set to 0° for Negative Edge and set to 240° for Positive Edge. On A33 and similar SoCs there would be a 90° phase option, but it divides also dclk by 2. This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers for using A33 90° phase divided by 2 and consequently increase code complexity. Check if panel is used. TCON can also handle VGA DAC, then panel could be empty. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180718142357.120998-1-giulio.benetti@micronovasrl.com
2018-07-11drm/sun4i: tcon: Release node when traversing of graphJernej Skrabec
Function sun4i_tcon_find_engine_traverse() doesn't release node if it needs to traverse of graph deeper than 1 level. Fix this by calling of_node_put(). Fixes: 49836b11fe71 ("drm/sun4i: tcon: Generalize engine search algorithm") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-6-jernej.skrabec@siol.net
2018-06-28Merge tag 'ib-fbdev-drm-v4.19-deferred-console-takeover' of ↵Gustavo Padovan
https://github.com/bzolnier/linux into drm-misc-next Immutable branch between fbdev and drm for the v4.19 merge window (contains the deferred console takeover feature) Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> # gpg: Signature made Thu 28 Jun 2018 10:24:50 AM -03 # gpg: using RSA key 7E33B63FA047C20B # gpg: Can't check signature: public key not found # Conflicts: # drivers/gpu/drm/i915/i915_gem.c # drivers/gpu/drm/i915/intel_crt.c # drivers/gpu/drm/i915/intel_display.c # drivers/gpu/drm/i915/intel_lrc.c Link: https://patchwork.freedesktop.org/patch/msgid/2462549.rLSfW9kX99@amdc3058
2018-06-27drm/sun4i: Don't check for panel or bridge on TV TCONsJernej Skrabec
TV TCONs are always connected to TV or HDMI encoder, so it doesn't make sense to check if panel or bridge is connected to them. Check if TCON has channel 0 and only then check for connected panel or bridges. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-13-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Don't check for LVDS and RGB when TCON has only ch1Jernej Skrabec
LVDS and RGB interfaces are always connected to TCONs which have channel 0. It doesn't make sense to try to init them on TV TCONs. Add a check if TCON has channel 0 before trying to init LVDS or RGB interface. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-12-jernej.skrabec@siol.net
2018-06-27drm/sun4i: tcon: Generalize engine search algorithmJernej Skrabec
Current "old" method to find engine worked pretty well for DE2. However, it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON TOP has multiple input ports, but current engine search algorithm expects only one. This can be fixed by first looking for output port id and selecting matching input by subtracting 1 for the next round. This work even if there is only one input and output. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-11-jernej.skrabec@siol.net
2018-06-22Merge tag 'drm-misc-fixes-2018-06-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v4.18-rc2: - A reversion of a commit in drm/sun4i to fix a run-time fault. - Various fixes to the sii8620 bridge. - Small bugfix to correctly check stride in atmel-hlcdc. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com
2018-06-18Revert "drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE"Paul Kocialkowski
This reverts commit 2c17a4368aad2b88b68e4390c819e226cf320f70. The offending commit triggers a run-time fault when accessing the panel element of the sun4i_tcon structure when no such panel is attached. It was apparently assumed in said commit that a panel is always used with the TCON. Although it is often the case, this is not always true. For instance a bridge might be used instead of a panel. This issue was discovered using an A13-OLinuXino, that uses the TCON in RGB mode for a simple DAC-based VGA bridge. Cc: stable@vger.kernel.org Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180613081647.31183-1-paul.kocialkowski@bootlin.com
2018-04-11drm/sun4i: Tie the DSI controller in the TCONMaxime Ripard
The DSI controller needs a particular interface (CPU aka 8080) with some modifications from the TCON in order to run. Make sure the TCON is able to provide it when we are using the DSI output. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/129f5928113d2ca865bf5269047c2e4ba6fed5e6.1522835818.git-series.maxime.ripard@bootlin.com
2018-04-11drm/sun4i: tcon: Add TRI finish interrupt for vblankMaxime Ripard
The "CPU" (or Intel 8080) interface uses a different interrupt called TRI_FINISH (most likely TRI being for trigger) to notify the end of frames, and hence the VBLANK period. And that interrupt to the possible VBLANK interrupts source. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/de6d6ad8959da77ea3a974a31a4c0c8391178748.1522835818.git-series.maxime.ripard@bootlin.com
2018-03-28Backmerge tag 'v4.16-rc7' into drm-nextDave Airlie
Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though.
2018-03-19drm/sun4i: Add support for A80 TCONsChen-Yu Tsai
The Allwinner A80 SoC has 2 documented TCONs. The display pipeline diagram from the user manual shows a third TCON, but it's missing an interrupt line, and its registers are not explained either. It's also not used in Allwinner's vendor BSP. The first TCON only has channel 0, for LCD panel output. The TCON hardware setup is peculiar in that the eDP reset must also be deasserted to allow access to the TCON. How the eDP module is wired in the SoC itself is never explained. The second TCON only has channel 1, and its output is connected to the HDMI encoder block. This patch adds a "needs_edp_reset" field to the tcon quirks structure, and adds quirks and compatible strings for the 2 documented TCONs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180315114136.24747-4-wens@csie.org
2018-03-14drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGEGiulio Benetti
Handle both positive and negative dclk polarity, according to bus_flags, taking care of this: On A20 and similar SoCs, the only way to achieve Positive Edge (Rising Edge), is setting dclk clock phase to 2/3(240°). By default TCON works in Negative Edge(Falling Edge), this is why phase is set to 0 in that case. Unfortunately there's no way to logically invert dclk through IO_POL register. The only acceptable way to work, triple checked with scope, is using clock phase set to 0° for Negative Edge and set to 240° for Positive Edge. On A33 and similar SoCs there would be a 90° phase option, but it divides also dclk by 2. This patch is a way to avoid quirks all around TCON and DOTCLOCK drivers for using A33 90° phase divided by 2 and consequently increase code complexity. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/1520963677-124239-1-git-send-email-giulio.benetti@micronovasrl.com
2018-03-12drm/sun4i: Fix exclusivity of the TCON clocksOndrej Jirman
Currently the exclusivity is enabled when the rate is set by the mode setting functions. These functions are called by mode_set_nofb callback of drm_crc_helper. Then exclusivity is disabled when tcon is disabled by atomic_disable callback. What happens is that mode_set_nofb can be called once when mode changes, and afterwards the system can call atomic_enable and atomic_disable multiple times without further calls to mode_set_nofb. This happens: mode_set_nofb - clk exclusivity is enabled atomic_enable atomic_disable - clk exclusivity is disabled atomic_enable atomic_disable - clk exclusivity is already disabled, leading to WARN in clk_rate_exclusive_put Solution is to enable exclusivity in sun4i_tcon_channel_set_status. Signed-off-by: Ondrej Jirman <megous@megous.com> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180310110511.14697-1-megous@megous.com
2018-03-06drm/sun4i: tcon: Reduce the scope of the LVDS error a bitMaxime Ripard
The current logic to deal with old DT missing the LVDS properties doesn't take into account whether the LVDS output is supported in the first place, resulting in spurious error messages on SoCs where it doesn't even matter. Introduce a new TCON flag to list if LVDS is supported at all to prevent this from happening. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-1-maxime.ripard@bootlin.com
2018-03-02drm/sun4i: Release exclusive clock lock when disabling TCONJernej Skrabec
Currently exclusive TCON clock lock is never released, which, for example, prevents changing resolution on HDMI. In order to fix that, release clock when disabling TCON. TCON is always disabled first before new mode is set. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-7-jernej.skrabec@siol.net
2018-02-26drm/sun4i: Protect the TCON pixel clocksMaxime Ripard
Both TCON clocks are very sensitive to clock changes, since any change might lead to improper timings. Make sure our rate is never changed. Tested-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/d5224d2e81ecf73dc09f234e580ada52c00eaee3.1519204731.git-series.maxime.ripard@bootlin.com
2018-02-26drm/sun4i: Enable the output on the pins (tcon0)Ondrej Jirman
I noticed that with 4.16-rc1 LVDS output on A83T based TBS A711 tablet doesn't work (there's output but it's garbled). I compared some older patches for LVDS support with the mainlined ones and this change is missing from mainline Linux. I don't know what the register does exactly and the harcoded register value doesn't inspire much confidence that it will work in a general case, so I'm sending this RFC. This patch fixes the issue on A83T. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180222161217.23904-1-megous@megous.com
2018-02-16Merge airlied/drm-next into drm-misc-nextSean Paul
Backmerge 4.15 and hdcp topic branch Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-02-16drm/sun4i: fix HSYNC and VSYNC polarityGiulio Benetti
Differently from other Lcd signals, HSYNC and VSYNC signals result inverted if their bits are cleared to 0. Invert their settings of IO_POL register. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/1518717288-123578-1-git-send-email-giulio.benetti@micronovasrl.com
2018-02-16drm/sun4i: Add support for A83T second TCONJernej Skrabec
This TCON is connected to HDMI encoder. Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-9-jernej.skrabec@siol.net
2018-02-16drm/sun4i: Add has_channel_0 TCON quirkJernej Skrabec
Some TCONs on newer SoCs doesn't support channel 0, since they are meant to be used only with TV or HDMI encoder. Prepare support for them with adding has_channel_0 quirk. Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-8-jernej.skrabec@siol.net
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 04:23:45 +0000