summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/sti
AgeCommit message (Collapse)Author
2016-06-21drm: sti: rework init sequenceBenjamin Gaignard
Use drm_dev_alloc() and drm_dev_register() instead of .load() To simplify init sequence only create fbdev when requested in output_poll_changed(). version 2: remove call to drm_connector_unregister_all() and drm_dev_set_unique() Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466514580-15194-4-git-send-email-benjamin.gaignard@linaro.org
2016-06-21drm: sti: use late_register and early_unregister callbacksBenjamin Gaignard
Make sti driver use register callback to move debugfs initialization out of sub-components creation. This will allow to convert driver .load() to drm_dev_alloc() and drm_dev_register(). sti_compositor bring up 2 crtc but only one debugfs init is needed so use drm_crtc_index to do it on the first one. This can't be done in sti_drv because only sti_compositor have access to the devices. It is almost the same for sti_encoder which handle multiple encoder while one only debugfs entry is needed so add a boolean to avoid multiple debugfs initialization Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1466514580-15194-3-git-send-email-benjamin.gaignard@linaro.org
2016-06-17drm/sti: Don't call drm_helper_disable_unused_functionsDaniel Vetter
Atomic drivers are supposed to do hw/sw state reset with the drm_mode_config_reset() call right above it. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464818821-5736-38-git-send-email-daniel.vetter@ffwll.ch
2016-06-10drm/atomic-helper: Massage swap_state signature somewhatDaniel Vetter
- dev is redundant, we have state->atomic - add stall parameter, which must be set when swapping needs to stall for preceeding commits to stop looking at ->state pointers. Currently all drivers need this to be, just prep work for a glorious future. v2: Rebased on top of commit e7cf0963f816fa44190caaf51aeffaa614c340c6 Author: Gerd Hoffmann <kraxel@redhat.com> Date: Tue May 31 08:50:47 2016 +0200 virtio-gpu: add atomic_commit function Cc: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465509992-19284-1-git-send-email-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-2-git-send-email-daniel.vetter@ffwll.ch
2016-06-09drm: sti: Rely on the default ->best_encoder() behaviorBoris Brezillon
All outputs have a 1:1 relationship between connectors and encoders and the driver is relying on the atomic helpers: we can drop the custom ->best_encoder() implementations and let the core call drm_atomic_helper_best_encoder() for us. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-12-git-send-email-boris.brezillon@free-electrons.com
2016-06-01drm/sti: Use lockless gem BO free callbackDaniel Vetter
With Benjanim's patch to remove the dev->struct_mutex cargo cult the sti driver is now also entirely legacy locking free. Let's convert it too. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-20-git-send-email-daniel.vetter@ffwll.ch
2016-06-01drm: sti: remove useless call to dev->struct_mutexBenjamin Gaignard
No need to protect debugfs functions with dev->struct_mutex Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464630800-30786-19-git-send-email-daniel.vetter@ffwll.ch
2016-06-01drm/sti: remove extra mode fixupTomi Valkeinen
Commit 652353e6e561c2aeeac62df183f721f6f9b5b45f ("drm/sti: set CRTC modesetting parameters") added a hack to avoid warnings related to setting mode with atomic API. With the previous patch, the hack should no longer be necessary. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-27remove lots of IS_ERR_VALUE abusesArnd Bergmann
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-11drm/sti: include linux/seq_file.h where neededArnd Bergmann
The sti drm driver has a lot of debugfs interface that cause build errors in some configurations when seq_file.h is not included implicitly: drm/sti/sti_mixer.c: In function 'mixer_dbg_ctl': drm/sti/sti_mixer.c:88:2: error: implicit declaration of function 'seq_puts' [-Werror=implicit-function-declaration] drm/sti/sti_mixer.c:91:4: error: implicit declaration of function 'seq_printf' [-Werror=implicit-function-declaration] drm/sti/sti_gdp.c: In function 'gdp_dbg_ctl': drm/sti/sti_gdp.c:146:2: error: implicit declaration of function 'seq_puts' [-Werror=implicit-function-declaration] drm/sti/sti_gdp.c:149:4: error: implicit declaration of function 'seq_printf' [-Werror=implicit-function-declaration] drm/sti/sti_gdp.c: In function 'gdp_dbg_show': drm/sti/sti_gdp.c:208:32: error: dereferencing pointer to incomplete type 'struct seq_file' This adds an explicit #include statement in all of the affected files. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462830733-1710590-2-git-send-email-arnd@arndb.de
2016-05-02drm/sti: Rename async to nonblock.Maarten Lankhorst
The async name is deprecated and should be changed to nonblocking. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-9-git-send-email-maarten.lankhorst@linux.intel.com
2016-03-21Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.6 kernel. Overall the coolest thing here for me is the nouveau maxwell signed firmware support from NVidia, it's taken a long while to extract this from them. I also wish the ARM vendors just designed one set of display IP, ARM display block proliferation is definitely increasing. Core: - drm_event cleanups - Internal API cleanup making mode_fixup optional. - Apple GMUX vga switcheroo support. - DP AUX testing interface Panel: - Refactoring of DSI core for use over more transports. New driver: - ARM hdlcd driver i915: - FBC/PSR (framebuffer compression, panel self refresh) enabled by default. - Ongoing atomic display support work - Ongoing runtime PM work - Pixel clock limit checks - VBT DSI description support - GEM fixes - GuC firmware scheduler enhancements amdkfd: - Deferred probing fixes to avoid make file or link ordering. amdgpu/radeon: - ACP support for i2s audio support. - Command Submission/GPU scheduler/GPUVM optimisations - Initial GPU reset support for amdgpu vmwgfx: - Support for DX10 gen mipmaps - Pageflipping and other fixes. exynos: - Exynos5420 SoC support for FIMD - Exynos5422 SoC support for MIPI-DSI nouveau: - GM20x secure boot support - adds acceleration for Maxwell GPUs. - GM200 support - GM20B clock driver support - Power sensors work etnaviv: - Correctness fixes for GPU cache flushing - Better support for i.MX6 systems. imx-drm: - VBlank IRQ support - Fence support - OF endpoint support msm: - HDMI support for 8996 (snapdragon 820) - Adreno 430 support - Timestamp queries support virtio-gpu: - Fixes for Android support. rockchip: - Add support for Innosilicion HDMI rcar-du: - Support for 4 crtcs - R8A7795 support - RCar Gen 3 support omapdrm: - HDMI interlace output support - dma-buf import support - Refactoring to remove a lot of legacy code. tilcdc: - Rewrite of pageflipping code - dma-buf support - pinctrl support vc4: - HDMI modesetting bug fixes - Significant 3D performance improvement. fsl-dcu (FreeScale): - Lots of fixes tegra: - Two small fixes sti: - Atomic support for planes - Improved HDMI support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits) drm/amdgpu: release_pages requires linux/pagemap.h drm/sti: restore mode_fixup callback drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release ...
2016-03-18drm/sti: restore mode_fixup callbackArnd Bergmann
Commit 8a2fa38fddd3 removed the mode_fixup because it was empty, but 652353e6e561 modified it to call drm_mode_set_crtcinfo() instead. Both commits are correct, but the merge of the two kept the nonempty version without the reference to it, as shown by the gcc warning: drm/sti/sti_crtc.c:54:13: error: 'sti_crtc_mode_fixup' defined but not used This restores the callback pointer to fix the merge. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reverts: 8a2fa38fddd3 ("drm/sti: removed optional dummy crtc mode_fixup function.") Fixes: 652353e6e561 ("drm/sti: set CRTC modesetting parameters") Fixes: cf481068cdd4 ("Merge branch '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next") Acked-by: Vincent ABRIOU <vincent.abriou@st.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-03-17Merge branch '2016-02-26-st-drm-next' of ↵Dave Airlie
http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next Here are sti patches for drm-next. It brings: - The support of the atomic_check for the planes and minor fixes for planes - The support of the vendor specific infoframe for HDMI and the support of 2 HDMI properties related to the connector - The support of the DVO solving panel detection issue and timing issue. - The support of debugfs for connectors, encoders, crtcs and planes. * '2016-02-26-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel: (36 commits) drm/sti: use u32 to store DMA addresses drm: sti: remove sti_gem_prime_export hack drm/sti: add debugfs fps_show/fps_get mechanism for planes drm/sti: add debugfs entries for TVOUT encoders drm/sti: add debugfs entries for MIXER crtc drm/sti: add debugfs entries for VID plane drm/sti: add debugfs entries for HQVDP plane drm/sti: add debugfs entries for GDP planes drm/sti: add debugfs entries for CURSOR plane drm/sti: add debugfs entries for HDA connector drm/sti: add debugfs entries for DVO connector drm/sti: add debugfs entries for HDMI connector drm/sti: add hdmi_mode property for HDMI connector drm/sti: add colorspace property to the HDMI connector drm/sti: add HDMI vendor specific infoframe drm/sti: reset infoframe transmission when HDMI is stopped drm/sti: HDMI infoframe transmission mode not take into account drm/sti: reset HD DACS when HDA connector is created drm/sti: fix dvo data_enable signal drm/sti: adjust delay for DVO ...
2016-03-09dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()Luis R. Rodriguez
Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: daniel.vetter@ffwll.ch Cc: dhowells@redhat.com Cc: julia.lawall@lip6.fr Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@amacapital.net Cc: mst@redhat.com Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-04drm/sti: removed optional dummy crtc mode_fixup function.Carlos Palminha
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: Carlos Palminha <palminha@synopsys.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/08d27e27582fb2daa48555ab542245c6cf0a2268.1455630967.git.palminha@synopsys.com
2016-03-03drm/sti: use u32 to store DMA addressesArnd Bergmann
The STi drm driver correctly warns about invalid format strings when built with 64-bit dma_addr_t: sti_hqvdp.c: In function 'sti_hqvdp_vtg_cb': sti_hqvdp.c:605:119: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=] sti_hqvdp.c: In function 'sti_hqvdp_atomic_update': sti_hqvdp.c:931:118: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=] This could be changed to using the %pad format string, but that does not work when printing an rvalue, so instead I'm changing the type in the sti_hqvdp structure to u32, which is what gets written into the registers anyway. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-03-03drm: sti: remove sti_gem_prime_export hackBenjamin Gaignard
Thanks to "drm: prime: Honour O_RDWR during prime-handle-to-fd" commit we don't need to hack flags anymore. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-02-26drm/sti: add debugfs fps_show/fps_get mechanism for planesVincent Abriou
Display fps on demand for each used plane: cat /sys/kernel/debug/dri/0/fps_get Display fps in live in the console for each used plane: echo 255 > /sys/kernel/debug/dri/0/fps_show Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for TVOUT encodersVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for MIXER crtcVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for VID planeVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for HQVDP planeVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for GDP planesVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for CURSOR planeVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for HDA connectorVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for DVO connectorVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for HDMI connectorVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add hdmi_mode property for HDMI connectorVincent Abriou
Configures the framer of the HDMI connection. By default starts in HDMI mode and can be swtich to DVI. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add colorspace property to the HDMI connectorVincent Abriou
Make the value of the colorspace of the HDMI infoframe configurable. HDMI colorspace could be: RGB, YUV422 or YUV444 Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add HDMI vendor specific infoframeVincent Abriou
Vendor specific infoframe is mandatory for 4K2K resolution. Without this, the HDMI protocol compliance fails. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: reset infoframe transmission when HDMI is stoppedVincent Abriou
Clear all infoframe registers when the HDMI link is stopped. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: HDMI infoframe transmission mode not take into accountVincent Abriou
Set the infoframe transmission mode according to the type of the infoframe. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: reset HD DACS when HDA connector is createdVincent Abriou
Make sure the HD DACS are disabled when the HDA connector is created. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: fix dvo data_enable signalBich Hemon
Modify AWG algorithm in order to handle more than 1023 lines Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: adjust delay for DVOBich Hemon
Modify delay to display last pixel column on DVO Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: add missing encoder cleanup for DVO connectorVincent Abriou
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: fix panel detection for DVO connectorVincent Abriou
The DVO connector is tag as disconnect because of a wrong management of the panel detection. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: do not clip RGB/YUV component value at connector sideVincent Abriou
Disable the clipping mode for hdmi, dvo and hda connectors. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: adapt YUV colorspace in display pipelineBich Hemon
Use BT601 for SD/ED resolution and BT709 for HD resolution Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: implement atomic_check for the planesVincent Abriou
Atomic update should never fail. Thus all checks must be done in the atomic_check function for each plane (gdp, hqvdp and cursor). Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: force cursor CLUT fetchFabien Dessenne
It may happen that the cursor is displayed with wrong colors which can be explained by a CLUT wrongly fetched at the first display. Fetching the CLUT at each commit (=move) ensures that the right colors are used, at least from the first cursor move. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: GDP cropping fails when we remove 2 pixels horizontallyVincent Abriou
GDP source width should be equal to the destination width to get rid of this issue. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: fallback for GDP scalingBich Hemon
When a GDP gets a scale request (which it does not support), it accepts it but crops or clamps and outputs a warning message. Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: GDP planes only support RGB formatsBich Hemon
Only RGB formats supported by GDP planes Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: clarify the skip frame/field messageFabien Dessenne
When a frame or a field is skipped, output a Warning message instead of an Error message. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: awg_utils code cleanupBich Hemon
data_en is a local variable that doesn't need to be set as awg_generate_instr can be called directly with the requested value. Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: update VTG timing programmingVincent Abriou
This update eases to understand the VTG programming. It also sets a VTG output id for each supported connectors. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: set DRIVER_ATOMIC for stibenjamin.gaignard@linaro.org
sti now support of atomic modesetting so set the flag to enable it. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: fix cursor coordinatesbenjamin.gaignard@linaro.org
fix x/y typo while setting cursor coordinates Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 09:04:17 +0000