summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/rockchip
AgeCommit message (Collapse)Author
2016-05-21drm: Nuke ->vblank_disable_allowedDaniel Vetter
This was added in commit 0a3e67a4caac273a3bfc4ced3da364830b1ab241 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Sep 30 12:14:26 2008 -0700 drm: Rework vblank-wait handling to allow interrupt reduction. to stay backwards-compatible with old UMS code that didn't even tell the kernel when it did a modeset, so that the kernel could save/restore vblank counters. At worst this means vblanks will be somewhat funky on a setup that very likely no one still runs. So let's just nuke it. Plan B would be to set it unconditionally in drm_vblank_init for kms drivers, instead of in each driver separately. So if this patch breaks anything please only restore the hunks in drmP.h and drm_irq.c, plus add a check for DRIVER_MODESET in drm_vblank_init. Stumbled over this in a discussion on irc with Chris. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-17drm: Drop plane argument from __drm_atomic_helper_plane_destroy_stateDaniel Vetter
It's unused, and really this helper should only look at the state structure and nothing else. v2: Fix commit message (Laurent). v3: Rebase onto mtk driver merge. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Mark Yao <mark.yao@rock-chips.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-2-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Drop crtc argument from __drm_atomic_helper_crtc_destroy_stateDaniel Vetter
It's unused, and really this helper should only look at the state structure and nothing else. v2: Rebase on top of rockchip changes v3: Drop unrelated hunk, spotted by Laurent. v4: Rebase onto mtk driver merge. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462804451-15318-1-git-send-email-daniel.vetter@ffwll.ch
2016-05-17drm: Remove unused drm_device from drm_gem_object_lookup()Chris Wilson
drm_gem_object_lookup() has never required the drm_device for its file local translation of the user handle to the GEM object. Let's remove the unused parameter and save some space. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Fixup kerneldoc too.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-05-05Merge tag 'topic/drm-misc-2016-05-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Ofc I promise just a few leftovers for drm-misc and somehow it's the biggest pull. But really mostly trivial stuff: - MAINTAINERS updates from Emil - rename async to nonblock in atomic_commit to avoid the confusion between nonblocking ioctl and async flip (= not vblank synced), from Maarten. Needs to be regened with newer drivers, but probably only after -rc1 to catch them all. - actually lockless gem_object_free, plus acked driver conversion patches. All the trickier prep stuff already is in drm-next. - Noralf's nice work for generic defio support in our fbdev emulation. Keeps the udl hack, and qxl is tested by Gerd. * tag 'topic/drm-misc-2016-05-04' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm: Fixup locking WARN_ON mistake around gem_object_free_unlocked drm/etnaviv: Use lockless gem BO free callback drm/imx: Use lockless gem BO free callback drm/radeon: Use lockless gem BO free callback drm/amdgpu: Use lockless gem BO free callback drm/gem: support BO freeing without dev->struct_mutex MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver. MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers MAINTAINERS: Add a few DRM drivers by Dave Airlie MAINTAINERS: List the correct git repo for the Renesas DRM drivers MAINTAINERS: Update the files list for the Renesas DRM drivers MAINTAINERS: Update the files list for the Armada DRM driver MAINTAINERS: Update the files list for the Rockchip DRM driver MAINTAINERS: Update the files list for the Exynos DRM driver MAINTAINERS: Add maintainer entry for the VMWGFX DRM driver MAINTAINERS: Add maintainer entry for the MSM DRM driver MAINTAINERS: Add maintainer entry for the Nouveau DRM driver MAINTAINERS: Update the files list for the Etnaviv DRM driver MAINTAINERS: Remove unneded wildcard for the i915 DRM driver drm/atomic: Add WARN_ON when state->acquire_ctx is not set. ...
2016-05-03drm/rockchip: vop: Initialize vskiplines to zeroMark Yao
There is a path that use vskiplines with non-initialize. That would cause vop abnormal behavior. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2016-05-03drm/rockchip: vop: fix iommu crash with async atomicMark Yao
After async atomic_commit callback, drm_atomic_clean_old_fb will clean all old fb, but because async, the old fb may be also on the vop hardware, dma will access the old fb buffer, clean old fb will cause iommu page fault. Reference the fb and unreference it when the fb actuall swap out from vop hardware. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2016-05-03drm/rockchip: support non-iommu buffer pathMark Yao
Some rockchip vop not support iommu, need use non-iommu buffer for it. And if we get iommu issues, we can compare the issues with non-iommu path, that would help the debug. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2016-05-03drm/rockchip: get rid of rockchip_drm_crtc_mode_configMark Yao
We need to take care of the vop status when use rockchip_drm_crtc_mode_config, if vop is disabled, the function would failed, that is terrible. Save output_type and output_mode into rockchip_crtc_state, it's nice to make them into atomic. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Tested-by: John Keeping <john@metanate.com>
2016-05-03drm/rockchip: inno_hdmi: fix an error codeDan Carpenter
We were accidentally returning PTR_ERR(NULL) which means success when we wanted to return a negative error code. Fixes: 412d4ae6b7a5 ('drm/rockchip: hdmi: add Innosilicon HDMI support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Yakir Yang <ykk@rock-chips.com>
2016-05-03drm/rockchip: don't leak iommu mappingJohn Keeping
arm_iommu_attach_device() takes its own reference to the mapping we give it. Since we do not keep a reference to the mapping ourselves, we must release it before returning. Also fix the error path, which fails to release the mapping if it has called arm_iommu_detach_device() since that clears archdata.mapping. Signed-off-by: John Keeping <john@metanate.com>
2016-05-03drm/rockchip: remove redundant statementJohn Keeping
The call to arm_iommu_detach_device() on the previous line sets dev->archdata.mapping to NULL so this call is always a no-op. Signed-off-by: John Keeping <john@metanate.com>
2016-05-02drm/rockchip: Rename async to nonblock.Maarten Lankhorst
The async name is deprecated and should be changed to nonblocking. Cc: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461679905-30177-11-git-send-email-maarten.lankhorst@linux.intel.com
2016-04-06Merge branch 'drm-next-analogix-dp-v2' of github.com:yakir-Yang/linux into ↵Dave Airlie
drm-next This pull request want to land the analogix_dp driver into drm/bridge directory, which reused the Exynos DP code, and add Rockchip DP support. And those patches have been: * 'drm-next-analogix-dp-v2' of github.com:yakir-Yang/linux: drm: bridge: analogix/dp: Fix the possible dead lock in bridge disable time drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time drm: bridge: analogix/dp: add edid modes parse in get_modes method drm: bridge: analogix/dp: move hpd detect to connector detect function drm: bridge: analogix/dp: try force hpd after plug in lookup failed drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288 drm: bridge: analogix/dp: add some rk3288 special registers setting dt-bindings: add document for rockchip variant of analogix_dp drm: rockchip: dp: add rockchip platform dp driver ARM: dts: exynos/dp: remove some properties that deprecated by analogix_dp driver dt-bindings: add document for analogix display port driver drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range drm: bridge: analogix/dp: remove duplicate configuration of link rate and link count drm: bridge: analogix/dp: fix some obvious code style drm: bridge: analogix/dp: rename register constants drm/exynos: dp: rename implementation specific driver part drm: bridge: analogix/dp: split exynos dp driver to bridge directory
2016-04-05drm: rockchip: dp: add rockchip platform dp driverYakir Yang
Rockchip have three clocks for dp controller, we leave pclk_edp to analogix_dp driver control, and keep the sclk_edp_24m and sclk_edp in platform driver. Acked-by: Mark Yao <mark.yao@rock-chips.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-28drm/rockchip: dw_hdmi: Don't call platform_set_drvdata()Douglas Anderson
The Rockchip dw_hdmi driver just called platform_set_drvdata() to get your hopes up that maybe, somehow, you'd be able to retrieve the 'struct rockchip_hdmi' from a pointer to the 'struct device'. You can't. When we call dw_hdmi_bind() the main driver calls dev_set_drvdata(), which clobbers our setting. Let's just remove the platform_set_drvdata() to avoid dashing people's hopes. Signed-off-by: Douglas Anderson <dianders@chromium.org>
2016-03-28drm/rockchip: vop: Fix vop crtc cleanupDouglas Anderson
This fixes a few problems in the vop crtc cleanup (handling error paths and cleanup upon exit): * The vop_create_crtc() error path had an unsafe version of the iterator used for iterating over all planes (though it was destroying planes in the iterator so should have used the safe version) * vop_destroy_crtc() - wasn't calling vop_plane_destroy(), which made slub_debug unhappy, at least if we ended up running this due to a deferred probe. * In vop_create_crtc() if we were missing the "port" device tree node we would fail but not return an error (found by code inspection). Fix these problems. Signed-off-by: Douglas Anderson <dianders@chromium.org>
2016-03-28drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error pathDouglas Anderson
The drm_encoder_cleanup() was missing both from the error path of dw_hdmi_rockchip_bind(). This caused a crash when slub_debug was enabled and we ended up deferring probe of HDMI at boot. This call isn't needed from unbind() because if dw_hdmi_bind() returns no error then it takes over the job of freeing the encoder (in dw_hdmi_unbind). Signed-off-by: Douglas Anderson <dianders@chromium.org>
2016-03-28drm/rockchip: vop: Disable planes when disabling CRTCTomeu Vizoso
When a VOP is re-enabled, it will start scanning right away the framebuffers that were configured from the last time, even if those have been destroyed already. To prevent the VOP from trying to access freed memory, disable all its windows when the CRTC is being disabled, then each window will get a valid framebuffer address before it's enabled again. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://lkml.kernel.org/g/CAAObsKAv+05ih5U+=4kic_NsjGMhfxYheHR8xXXmacZs+p5SHw@mail.gmail.com
2016-03-28drm/rockchip: vop: Don't reject empty modesetsTomeu Vizoso
So that when DRM_IOCTL_MODE_SETCRTC is called without a FB nor mode, the CRTC gets disabled. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: http://lkml.kernel.org/g/CAAObsKAv+05ih5U+=4kic_NsjGMhfxYheHR8xXXmacZs+p5SHw@mail.gmail.com
2016-03-28drm/rockchip: cancel pending vblanks on closeJohn Keeping
When closing the DRM device while a vblank is pending, we access file_priv after it has been free'd, which gives: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at __list_add+0x5c/0xe8 LR is at send_vblank_event+0x54/0x1f0 ... [<c02952e8>] (__list_add) from [<c031a7b4>] (send_vblank_event+0x54/0x1f0) [<c031a760>] (send_vblank_event) from [<c031a9c0>] (drm_send_vblank_event+0x70/0x78) [<c031a950>] (drm_send_vblank_event) from [<c031a9f8>] (drm_crtc_send_vblank_event+0x30/0x34) [<c031a9c8>] (drm_crtc_send_vblank_event) from [<c0339ad8>] (vop_isr+0x224/0x28c) [<c03398b4>] (vop_isr) from [<c0081780>] (handle_irq_event_percpu+0x12c/0x3e4) This can be triggered somewhat reliably with: modetest -M rockchip -v -s ... Add a preclose hook to the driver so that we can discard any pending vblank events when the device is closed. Signed-off-by: John Keeping <john@metanate.com>
2016-03-28drm/rockchip: vop: fix crtc size in plane checkJohn Keeping
If the geometry of a crtc is changing in an atomic update then we must validate the plane size against the new state of the crtc and not the current size, otherwise if the crtc size is increasing the plane will be cropped at the previous size and will not fill the screen. Signed-off-by: John Keeping <john@metanate.com>
2016-03-02Merge tag 'imx-drm-next-20160301' of git://git.pengutronix.de/git/pza/linux ↵Dave Airlie
into drm-next imx-drm vblank IRQ control, fence support, and of endpoint helpers - Add and make use of drm_of_active_endpoint helpers - Silence a noisy dev_info into a dev_dbg - Stop touching primary fb on pageflips - Track flip state explicitly - Keep GEM buffer objects referenced while scanout is active - Implement fence sync by deferring flips to a workqueue for dma-bufs with pending fences - Actually disable vblank IRQs while they are not needed * tag 'imx-drm-next-20160301' of git://git.pengutronix.de/git/pza/linux: drm/imx: only enable vblank IRQs when needed drm/imx: implement fence sync drm/imx: keep GEM object referenced as long as scanout is active drm/imx: track flip state explicitly drm/imx: don't touch primary fb on pageflip drm/imx: ipuv3 plane: Replace dev_info with dev_dbg if a plane's CRTC changes gpu: ipu-v3: ipu-dc: Simplify display controller microcode setup drm/rockchip: remove rockchip_drm_encoder_get_mux_id drm/imx: remove imx_drm_encoder_get_mux_id drm: add drm_of_encoder_active_endpoint helpers
2016-03-01drm/rockchip: remove rockchip_drm_encoder_get_mux_idPhilipp Zabel
It is replaced by drm_of_encoder_active_endpoint_id. Suggested-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Yakir Yang <ykk@rock-chips.com> [for dw_hdmi-rockchip] Acked-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-02-19Merge branch 'drm-rockchip-next-2016-02-18' of ↵Dave Airlie
https://github.com/markyzq/kernel-drm-rockchip into drm-next add Innosilicon HDMI support. * 'drm-rockchip-next-2016-02-18' of https://github.com/markyzq/kernel-drm-rockchip: dt-bindings: add document for Innosilicon HDMI on Rockchip platform drm/rockchip: hdmi: add Innosilicon HDMI support
2016-02-18drm/rockchip: hdmi: add Innosilicon HDMI supportYakir Yang
The Innosilicon HDMI is a low power HDMI 1.4 transmitter IP, and it have been integrated on some rockchip CPUs (like RK3036, RK312x). Signed-off-by: Yakir Yang <ykk@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de>
2016-02-16drm/rockchip: removed optional dummy encoder mode_fixup function.Carlos Palminha
mode_fixup function for encoder drivers became optional with patch http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com This patch set nukes all the dummy mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: Carlos Palminha <palminha@synopsys.com> Acked-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/cae559aa2c04a906c21ed5ebe4861f92440e6910.1455540137.git.palminha@synopsys.com
2016-01-22drm/rockchip: respect CONFIG_DRM_FBDEV_EMULATIONJohn Keeping
If DRM_FBDEV_EMULATION is not selected in the config then we can save a bit of space by not including the framebuffer code. Signed-off-by: John Keeping <john@metanate.com>
2016-01-21drm/rockchip: fix wrong pitch/size using on gemMark Yao
args->pitch and args->size may not be set by userspace, sometimes userspace only malloc args and not memset args to zero, then args->pitch and args->size is random, it is very danger to use pitch/size on gem. pitch's type is u32, and min_pitch's type is int, example, pitch is 0xffffffff, then pitch < min_pitch return true, then gem will alloc very very big bufffer, it would eat all the memory and cause kernel crash. Stop using pitch/size from args, calc them from other args. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2016-01-20drm/rockchip: explain why we can't wait_for_vblanksJohn Keeping
Signed-off-by: John Keeping <john@metanate.com>
2016-01-20drm/rockchip: don't wait for vblank if fb hasn't changedJohn Keeping
As commented in drm_atomic_helper_wait_for_vblanks(), userspace relies on cursor ioctls being unsynced. Converting the rockchip driver to atomic has significantly impacted cursor performance by making every cursor update wait for vblank. By skipping the vblank sync when the framebuffer has not changed (as is done in drm_atomic_helper_wait_for_vblanks()) we can avoid this for the common case of moving the cursor and only need to delay the cursor ioctl when the cursor icon changes. We cannot add the check on legacy_cursor_update since that results in the cursor bo being unreferenced while the hardware may still be reading it. Fully supporting unsynced cursor updates is left for the future when the atomic helper framework supports async updates. Signed-off-by: John Keeping <john@metanate.com> Tested-by: Heiko Stuebner <heiko@sntech.de>
2016-01-18drm/rockchip/dsi: fix handling mipi_dsi_pixel_format_to_bpp resultAndrzej Hajda
The function can return negative value so it should be assigned to signed variable. The problem has been detected using patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Chris Zhong <zyw@rock-chips.com>
2016-01-18drm/rockchip: vop: fix mask when updating interruptsJohn Keeping
Commit dbb3d94 (drm/rockchip: vop: move interrupt registers into vop_data) introduced new macros for updating the interrupt control registers but these always use the mask from the register definition without refining it for the particular bits that are being changed. This means that whenever we enable/disable a particular interrupt we end up disabling all of the others as a side effect. Signed-off-by: John Keeping <john@metanate.com>
2016-01-18drm/rockchip: cleanup unnecessary export symbolMark Yao
Now rockchip_drm_vop.c is build into rockchipdrm.ko, so no need to export following symbol anymore: rockchip_drm_dma_attach_device rockchip_drm_dma_detach_device rockchip_drm_dma_attach_device rockchip_drm_dma_detach_device rockchip_register_crtc_funcs rockchip_unregister_crtc_funcs rockchip_fb_get_gem_obj Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2016-01-18drm/rockchip: Don't build rockchip_drm_vop as modulesMark Yao
rockchip_drm_vop's module init had moved to rockchip_vop_reg.c so no need to build rockchip_drm_vop.ko Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2016-01-06drm: rockchip: Support Synopsys DW MIPI DSIChris Zhong
Add support for Synopsys DesignWare MIPI DSI controller which is embedded in the rk3288 SoCs. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Acked-by: Mark Yao <mark.yao@rock-chips.com>
2016-01-06drm/rockchip: return a true clock rate to adjusted_modeChris Zhong
Since the mipi dsi driver need to use the clock of vop to make the calculation of Blanking. But sometimes the clock driver can not set a accurate clock_rate for vop, get it by clk_round_rate before mode_set, so we can get the true value. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Acked-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-31drm/rockchip: vop: export vop_component_ops to modulesStephen Rothwell
Fixes: a67719d18229 ("drm/rockchip: vop: spilt register related into rockchip_reg_vop.c") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-12-28drm/rockchip: vop: add rk3036 vop supportMark Yao
RK3036 registers layout is quite difference with rk3288 layout, The IC design with different framework, rk3036 vop is VOP LITE, and rk3288 is VOP FULL. RK3036 support two overlay plane and one hwc plane, max output resolution is 1080p. it support IOMMU, and its IOMMU same as rk3288's. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: vop: spilt scale regstersMark Yao
There are two version scale control register found on vop, scale full version found on rk3288, support extension registers. and scale little version found on rk3036, only support common scale. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: vop: spilt register related into rockchip_reg_vop.cMark Yao
No functional updates. Spilt register related into another file would be nice to multi vop driver, Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: vop: move interrupt registers into vop_dataMark Yao
Move interrupt registers into vop_data, so it can use at multi-vop driver Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: vop: merge vop cfg_done into vop_dataMark Yao
Move cfg_done register into vop_data, so it can use at multi-vop driver Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: dw_hdmi: use encoder enable functionMark Yao
encoder.enable is more compatible to atomic api than encoder.prepare/commit Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: direct config connecter gate and out_modeMark Yao
Both connecter gate and out_mode are not conflict with mode set configure. Direct setting connecter gate and out_mode, that allow connector do rockchip_drm_crtc_mode_config after mode set. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: support atomic asynchronous commitMark Yao
If drm core requests a async commit, rockchip_drm_atomic_commit will schedule a work task to update later. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: Optimization vop mode setMark Yao
Rk3288 vop timing registers is immediately register, when configure timing on display active time, will cause tearing. use dclk reset is not a good idea to avoid this tearing. we can avoid tearing by using standby register. Vop standby register will take effect at end of current frame, and go back to work immediately when exit standby. So we can use standby register to protect this context. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: Convert to support atomic APIMark Yao
Rockchip vop not support hw vblank counter, needed check the committed register if it's really take effect. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: vop: replace dpms with enable/disableMark Yao
For vop, power by enable/disable is more suitable then legacy dpms function, and enable/disable more closely to the new atomic API. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
2015-12-28drm/rockchip: Use new vblank api drm_crtc_vblank_*Mark Yao
No functional update, drm_vblank_* is the legacy version of drm_crtc_vblank_*. and use new api make driver more clean. Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-28 19:24:12 +0000