summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/radeon.h
AgeCommit message (Collapse)Author
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25drm/radeon: Remove a bunch of useless _iomem castsBenjamin Herrenschmidt
Just defining rdev->rmmio properly in the first place should do the trick. In some cases, the cast were also complete dups as the original variable was already of the right type. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-18drm/radeon/kms: add info query for backend mapAlex Deucher
The 3D driver need to get the pipe to backend map to certain things. Add a query to get the info. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-24drm/radeon/kms: handle special cases for vddcAlex Deucher
A voltage value of 0xff01 requires that the driver look up the max voltage for the board based using the atom SetVoltage command table. Setting the proper voltage should fix stability on some newer asics. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-09drm/radeon/kms: check modes against max pixel clockAlex Deucher
Filter out modes that are higher than the max pixel clock. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13drm/radeon/kms: properly program vddci on evergreen+Alex Deucher
Change vddci as well as vddc when changing power modes on evergreen/ni. Also, properly set vddci on boot up for ni cards. The vbios only sets the limited clocks and voltages on boot until the mc ucode is loaded. This should fix stability problems on some btc cards. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-13drm/radeon/kms: add voltage type to atom set voltage functionAlex Deucher
This is needed for setting voltages other than vddc. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-16Merge commit '5359533801e3dd3abca5b7d3d985b0b33fd9fe8b' into drm-core-nextDave Airlie
This commit changed an internal radeon structure, that meant a new driver in -next had to be fixed up, merge in the commit and fix up the driver. Also fixes a trivial nouveau merge. Conflicts: drivers/gpu/drm/nouveau/nouveau_mem.c
2011-03-14drm/radeon: fix problem with changing active VRAM size. (v2)Dave Airlie
So we used to use lpfn directly to restrict VRAM when we couldn't access the unmappable area, however this was removed in 93225b0d7bc030f4a93165347a65893685822d70 as it also restricted the gtt placements. However it was only later noticed that this broke on some hw. This removes the active_vram_size, and just explicitly sets it when it changes, TTM/drm_mm will always use the real_vram_size, and the active vram size will change the TTM size used for lpfn setting. We should re-work the fpfn/lpfn to per-placement at some point I suspect, but that is too late for this kernel. Hopefully this addresses: https://bugs.freedesktop.org/show_bug.cgi?id=35254 v2: fix reported useful VRAM size to userspace to be correct. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-03drm/radeon/kms/cayman: add asic init/startup/fini/suspend/resume functionsAlex Deucher
Cayman is different enough from evergreen to warrant it's own functions. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-03drm/radeon/kms: add support for CP setup on cayman asicsAlex Deucher
Cayman asics have 3 ring buffers: ring 0 supports both gfx and compute rings 1 and 2 are compute only At the moment we only support ring 0. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-03-03drm/radeon/kms: add gpu_init function for caymanAlex Deucher
This may some work to get accel going. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23Merge branch 'drm-mm-cleanup' into drm-nextDave Airlie
* drm-mm-cleanup: radeon: move blit functions to radeon_asic.h radeon: kill decls for inline functions radeon: consolidate asic-specific function decls for r600 & later drm/radeon: kill radeon_bo->gobj pointer drm/radeon: introduce gem_to_radeon_bo helper drm/radeon: embed struct drm_gem_object drm: mm: add helper to unwind scan state drm: mm: add api for embedding struct drm_mm_node drm: mm: extract node insert helper functions drm: mm: track free areas implicitly drm/nouveau: don't munge in drm_mm internals
2011-02-23Merge branch 'stable/ttm.pci-api.v5' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into drm-next * 'stable/ttm.pci-api.v5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: ttm: Include the 'struct dev' when using the DMA API. nouveau/ttm/PCIe: Use dma_addr if TTM has set it. radeon/ttm/PCIe: Use dma_addr if TTM has set it. ttm: Expand (*populate) to support an array of DMA addresses. ttm: Utilize the DMA API for pages that have TTM_PAGE_FLAG_DMA32 set. ttm: Introduce a placeholder for DMA (bus) addresses.
2011-02-23radeon: move blit functions to radeon_asic.hDaniel Vetter
Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23radeon: consolidate asic-specific function decls for r600 & laterDaniel Vetter
Now all the asic specific stuff ist mostly hid in radeon_asic.* Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23drm/radeon: kill radeon_bo->gobj pointerDaniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23drm/radeon: introduce gem_to_radeon_bo helperDaniel Vetter
... and switch it to container_of upcasting. v2: converted new pageflip code-paths. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-23drm/radeon: embed struct drm_gem_objectDaniel Vetter
Unconditionally initialize the drm gem object - it's not worth the trouble not to for the few kernel objects. This patch only changes the place of the drm gem object, access is still done via pointers. v2: Uncoditionally align the size in radeon_bo_create. At least the r600/evergreen blit code didn't to this, angering the paranoid gem code. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-18radeon/ttm/PCIe: Use dma_addr if TTM has set it.Konrad Rzeszutek Wilk
If the TTM layer has used the DMA API to setup pages that are TTM_PAGE_FLAG_DMA32 (look at patch titled: "ttm: Utilize the dma_addr_t array for pages that are to in DMA32 pool."), lets use it when programming the GART in the PCIe type cards. This patch skips doing the pci_map_page (and pci_unmap_page) if there is a DMA addresses passed in for that page. If the dma_address is zero (or DMA_ERROR_CODE), then we continue on with our old behaviour. [v2: Fixed an indentation problem, added reviewed-by tag] [v3: Added Acked-by Jerome] Acked-by: Jerome Glisse <j.glisse@gmail.com> Reviewed-by: Thomas Hellstrom <thomas@shipmail.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Ian Campbell <ian.campbell@citrix.com>
2011-02-07drm: dumb scanout create/mmap for intel/radeon (v3)Dave Airlie
This is just an idea that might or might not be a good idea, it basically adds two ioctls to create a dumb and map a dumb buffer suitable for scanout. The handle can be passed to the KMS ioctls to create a framebuffer. It looks to me like it would be useful in the following cases: a) in development drivers - we can always provide a shadowfb fallback. b) libkms users - we can clean up libkms a lot and avoid linking to libdrm_*. c) plymouth via libkms is a lot easier. Userspace bits would be just calls + mmaps. We could probably mark these handles somehow as not being suitable for acceleartion so as top stop people who are dumber than dumb. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-04drm/radeon/kms: dynamically allocate power state spaceAlex Deucher
We previously used a static array, but some new systems had more states then we had array space, so dynamically allocate space based on the number of states in the vbios. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33851 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-02drm/radeon/kms: rv6xx+ thermal sensor fixesAlex Deucher
Some fixes to the thermal sensor code: - handle negative numbers - properly handle temp calculation on different asics Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-17drm/radeon/kms: add module option for pcie gen2Alex Deucher
Switching to pcie gen2 causes problems on some boards. Add a module option to turn it on/off. There are gen2 compatability issues with some motherboards it seems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33027 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07radeon: consolidate asic-specific function decls for pre-r600Daniel Vetter
Move them to radeon_asic.h together with the other asic specific stuff. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add ucode loader for NIAlex Deucher
The MC ucode is no longer loaded by the vbios tables as on previous asics. It now must be loaded by the driver. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5Alex Deucher
NI chips no longer load the MC ucode in the asic_init sequence so the asic comes up in a basic mode with low engine/memory clocks and a voltage. Once the MC ucode is loaded by the driver the card can be programmed to it's proper default clocks and voltage. As such the default clocks in the firmware info table as the post clocks, not the default running clocks. Track the default post clocks and default running clocks separately to handle this. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: handle NI thermal controllerAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add NI chip familiesAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: clean up ASIC_IS_DCE41() macroAlex Deucher
only fusion asics are dce4.1 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add support for gen2 pcie link speedsAlex Deucher
Supported on rv6xx/r7xx/evergreen. Cards come up in gen1 mode. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add pcie get/set lane support for r6xx/r7xx/evergreenAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon: use system_wq instead of dev_priv->wqTejun Heo
With cmwq, there's no reason for radeon to use a dedicated workqueue. Drop dev_priv->wq and use system_wq instead. Because radeon_driver_irq_uninstall_kms() may be called from unsleepable context, the work items can't be flushed from there. Instead, init and flush from radeon_irq_kms_init/fini(). While at it, simplify canceling/flushing of rdev->pm.dynpm_idle_work. Always initialize and sync cancel instead of being unnecessarily smart about it. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Alex Deucher <alexdeucher@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon/kms: manage r300 CMASK RAM access and allow CMASK clearMarek Olšák
The CMASK RAM is for colorbuffer compression (used in conjunction with MSAA). Only one user (filp) can access it. The CMASK RAM access is managed in the same way as Hyper-Z, but there is a separate ioctl, because an app that uses MSAA does not necessarily have to use zbuffering. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05drm/switcheroo: track state of switch in drivers.Dave Airlie
We need to track the state of the switch in drivers, so that after s/r we don't resume the card we've explicitly switched off before. Also don't allow a userspace open to occur if we've switched the gpu off. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05drm/radeon/kms: implement gpu lockup check for evergreenAlex Deucher
Now that soft reset works, we can add this. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-03Merge branch 'drm-radeon-fusion' of ../drm-radeon-next into drm-core-nextDave Airlie
* 'drm-radeon-fusion' of ../drm-radeon-next: drm/radeon/kms: add Ontario APU ucode loading support drm/radeon/kms: add Ontario Fusion APU pci ids drm/radeon/kms: enable MSIs on fusion APUs drm/radeon/kms: add power table parsing support for Ontario fusion APUs drm/radeon/kms: refactor atombios power state fetching drm/radeon/kms: add bo blit support for Ontario fusion APUs drm/radeon/kms: add thermal sensor support for fusion APUs drm/radeon/kms: fill in GPU init for AMD Ontario Fusion APUs drm/radeon/kms: add radeon_asic struct for AMD Ontario fusion APUs drm/radeon/kms: evergreen.c updates for fusion drm/radeon/kms: MC setup changes for fusion APUs drm/radeon/kms: move r7xx/evergreen to its own vram_gtt setup function drm/radeon/kms: add support for ss overrides on Fusion APUs drm/radeon/kms: Add support for external encoders on fusion APUs drm/radeon/kms: atom changes for DCE4.1 devices drm/radeon/kms: add new family id for AMD Ontario APUs drm/radeon/kms: upstream power table updates drm/radeon/kms: upstream atombios.h updates drm/radeon/kms: upstream ObjectID.h updates drm/radeon/kms: setup mc chremap properly on r7xx/evergreen
2010-12-03Merge branch 'drm-radeon-next' of ../drm-radeon-next into drm-core-nextDave Airlie
* 'drm-radeon-next' of ../drm-radeon-next: drm/radeon/kms: improve pflip precision on r1xx-r4xx drm/kms/radeon: Use high precision timestamps for pageflip completion events. drm/kms/radeon: Reorder vblank and pageflip interrupt handling. drm/radeon/kms: add pageflip ioctl support (v3) drm/kms/radeon: Add support for precise vblank timestamping.
2010-11-23drm/radeon/kms: add thermal sensor support for fusion APUsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-23drm/radeon/kms: move r7xx/evergreen to its own vram_gtt setup functionAlex Deucher
MC_VM_FB_LOCATION is at a different offset between r6xx and r7xx/evergreen. The location is needed for vram setup on fusion chips. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-23drm/radeon/kms: add new family id for AMD Ontario APUsAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22drm/radeon: Use the ttm execbuf utilitiesThomas Hellstrom
Rather than re-implementing in the Radeon driver, Use the execbuf / cs / pushbuf utilities that comes with TTM. This comes with an even greater benefit now that many spinlocks have been optimized away... Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-22drm/radeon/kms: add pageflip ioctl support (v3)Alex Deucher
This adds support for dri2 pageflipping. v2: precision updates from Mario Kleiner. v3: Multihead fixes from Mario Kleiner; missing crtc offset add note about update pending bit on pre-avivo chips Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-11-18drm/radeon/kms/atom: cleanup and unify DVO handlingAlex Deucher
Handle all the various asic family specific things for DVO. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-19Merge branch 'drm-fixes' of /home/airlied/kernel/linux-2.6 into drm-core-nextDave Airlie
Conflicts: drivers/gpu/drm/i915/intel_fb.c drivers/gpu/drm/radeon/r600_blit_kms.c drivers/gpu/drm/ttm/ttm_bo.c
2010-10-12drm/radeon/kms: avoid corner case issue with unmappable vram V2Jerome Glisse
We should not allocate any object into unmappable vram if we have no means to access them which on all GPU means having the CP running and on newer GPU having the blit utility working. This patch limit the vram allocation to visible vram until we have acceleration up and running. Note that it's more than unlikely that we run into any issue related to that as when acceleration is not woring userspace should allocate any object in vram beside front buffer which should fit in visible vram. V2 use real_vram_size as mc_vram_size could be bigger than the actual amount of vram [airlied: fixup r700_cp_stop case] Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: add drm blit support for evergreenAlex Deucher
This patch implements blit support for bo moves using the 3D engine. It uses the same method as r6xx/r7xx: - store the base state in an IB - emit variable state and vertex buffers to do the blit This allows the hw to move bos using the 3D engine and allows full use of vram beyond the pci aperture size. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: remove new pll algoAlex Deucher
The recent changes to the old algo (prefer high post div) coupled with the range and precision limitations of using fixed point with the new algo make the new algo less useful. So drop the new algo. This should work as well or better than the old new/old combinations and simplifies the code a lot. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=30218 among others. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms/r6xx+: use new style fencing (v3)Alex Deucher
On r6xx+ a newer fence mechanism was implemented to replace the old wait_until plus scratch regs setup. A single EOP event will flush the destination caches, write a fence value, and generate an interrupt. This is the recommended fence mechanism on r6xx+ asics. This requires my previous writeback patch. v2: fix typo that enabled event fence checking on all asics rather than just r6xx+. v3: properly enable EOP interrupts Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=29972 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 16:09:14 +0000