summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/radeon/ni.c
AgeCommit message (Collapse)Author
2013-11-08Merge tag 'drm-intel-fixes-2013-11-07' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Bit a bit -fixes pull request in the merge window than usual dua to two feauture-y things: - Display CRCs are now enabled on all platforms, including the odd DP case on gm45/vlv. Since this is a testing-only feature it should ever hurt, but I figured it'll help with regression-testing -fixes. So I left it in and didn't postpone it to 3.14. - Display power well refactoring from Imre. Would have caused major pain conflict with the bdw stage 1 patches if I'd postpone this to -next. It's only an relatively small interface rework, so shouldn't cause pain. It's also been in my tree since almost 3 weeks already. That accounts for about two thirds of the pull, otherwise just bugfixes: - vlv backlight fix from Jesse/Jani - vlv vblank timestamp fix from Jesse - improved edp detection through vbt from Ville (fixes a vlv issue) - eDP vdd fix from Paulo - fixes for dvo lvds on i830M - a few smaller things all over Note: This contains a backmerge of v3.12. Since the -internal branch always applied on top of -nightly I need that unified base to merge bdw patches. So you'll get a conflict with radeon connector props when pulling this (and nouveau/master will also conflict a bit when Ben doesn't rebase). The backmerge itself only had conflicts in drm/i915. There's also a tiny conflict between Jani's backlight fix and your sysfs lifetime fix in drm-next. * tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits) drm/i915/vlv: use per-pipe backlight controls v2 drm/i915: make backlight functions take a connector drm/i915: move opregion asle request handling to a work queue drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV drm/i915: Make intel_dp_is_edp() less specific drm/i915: Give names to the VBT child device type bits drm/i915/vlv: enable HDA display audio for Valleyview2 drm/i915/dvo: call ->mode_set callback only when the port is running drm/i915: avoid unclaimed registers when capturing the error state drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv drm/i915: scramble reset support for DP port CRC on vlv drm/i915: scramble reset support for DP port CRC on g4x drm/i916: add "auto" pipe CRC source ... Conflicts: MAINTAINERS drivers/gpu/drm/i915/intel_panel.c drivers/gpu/drm/nouveau/core/subdev/mc/base.c drivers/gpu/drm/radeon/atombios_encoders.c drivers/gpu/drm/radeon/radeon_connectors.c
2013-11-01drm/radeon: drop CP page table updates & cleanup v2Christian König
The DMA ring seems to be stable now. v2: remove pt_ring_index as well Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-10-18drm/radeon: make missing smc ucode non-fatal (r7xx-SI)Alex Deucher
Prevent driver load problems if the smc is missing. bug: https://bugzilla.kernel.org/show_bug.cgi?id=63011 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: stable@vger.kernel.org
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-30drm/radeon: fix init ordering for r600+Alex Deucher
The vram scratch buffer needs to be initialized before the mc is programmed otherwise we program 0 as the GPU address of the default GPU fault page. In most cases we put vram at zero anyway and reserve a page for the legacy vga buffer so in practice this shouldn't cause any problems, but better to make it correct. Was changed in: 6fab3febf6d949b0a12b1e4e73db38e4a177a79e Reported-by: FrankR Huang <FrankR.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-30drm/radeon: add audio support for DCE6/8 GPUs (v12)Alex Deucher
Similar to DCE4/5, but supports multiple audio pins which can be assigned per afmt block. v2: rework the driver to handle more than one audio pin. v3: try different dto reg v4: properly program dto v5 (ck): change dto programming order v6: program speaker allocation block v7: rebase v8: rebase on Rafał's changes v9: integrated Rafał's comments, update to latest drm_edid_to_speaker_allocation API v10: add missing line break in error message v11: add back audio enabled messages v12: fix copy paste typo in r600_audio_enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Rafał Miłecki <zajec5@gmail.com>
2013-08-30drm/radeon: separate DMA codeChristian König
Similar to separating the UVD code, just put the DMA functions into separate files. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: separate UVD code v3Christian König
Our different hardware blocks are actually completely separated, so it doesn't make much sense any more to structure the code by pure chipset generations. Start restructuring the code by separating our the UVD block. v2: updated commit message v3: rebased and restructurized start/stop functions for kv dpm. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: remove special handling for the DMA ringChristian König
Now that we have callbacks for [rw]ptr handling we can remove the special handling for the DMA rings and use the callbacks instead. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: rework UVD writeback & [rw]ptr handlingChristian König
The hardware just doesn't support this correctly. Disable it before we accidentally write anywhere we shouldn't. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: restructure UVD code to handle UVD PG (v2)Alex Deucher
When we PG (powergate) UVD, we need to re-initialize it before we can use it again. v2: rebase on UVD stop fixes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon: convert SI,CIK to use sumo_rlc functionsAlex Deucher
and remove duplicate si_rlc functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-30drm/radeon/kms: remove r6xx+ blit copy routinesAlex Deucher
No longer used now that we use the async dma engines or CP DMA for bo copies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: make missing smc ucode non-fatalAlex Deucher
The smc ucode is required for dpm (dynamic power management), but if it's missing just skip dpm setup and don't disable acceleration. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=67876 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-08-07drm/radeon: always program the MC on startupAlex Deucher
For r6xx+ asics. This mirrors the behavior of pre-r6xx asics. We need to program the MC even if something else in startup() fails. Failure to do so results in an unusable GPU. Based on a fix from: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-08-07drm/radeon: fix halting UVDChristian König
Removing the clock/power or resetting the VCPU can cause hangs if that happens in the middle of a register write. Stall the memory and register bus before putting the VCPU into reset. Keep it in reset when unloading the module or suspending. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-07-23drm/radeon: s/drm_order/order_base_2/Daniel Vetter
Last driver and pretty obviously a major user of this little function. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-07-14drm/radeon: add fault decode function for cayman/TN (v2)Alex Deucher
Helpful for debugging GPUVM errors as we can see what hw block and page generated the fault in the log. v2: simplify fault decoding Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2013-07-14drm/radeon: use radeon device for request firmwareJerome Glisse
Avoid creating temporary platform device that will lead to issue when several radeon gpu are in same computer. Instead directly use the radeon device for requesting firmware. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: enable additional power gating features on trinityAlex Deucher
TN has some additional powergating features beyond what is supported on ON/LN. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add support for ASPM on evergreen asicsAlex Deucher
Enables PCIE ASPM (Active State Power Management) on evergreen-cayman asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: add dpm support for cayman (v5)Alex Deucher
This adds dpm support for cayman asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) - power containment - shader power scaling Set radeon.dpm=1 to enable. v2: fold in tdp fix v3: fix indentation v4: fix 64 bit div v5: attempt to fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2013-06-27drm/radeon/kms: add dpm support for btc (v3)Alex Deucher
This adds dpm support for btc asics. This includes: - clockgating - dynamic engine clock scaling - dynamic memory clock scaling - dynamic voltage scaling - dynamic pcie gen1/gen2 switching (requires additional acpi support) Set radeon.dpm=1 to enable. v2: reduce stack usage v3: attempt to fix state enable Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: properly set up the RLC on ON/LN/TN (v3)Alex Deucher
This is required for certain advanced functionality. v2: save/restore list takes dword offsets v3: rebase on gpu reset changes Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon/kms: move ucode defines to a separate headerAlex Deucher
Avoids confusion and duplication. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-27drm/radeon: add support for thermal sensor on tnAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-06-03radeon: Fix system hang issue when using KMS with older cardsAdis Hamzić
The current radeon driver initialization routines, when using KMS, are written so that the IRQ installation routine is called before initializing the WB buffer and the CP rings. With some ASICs, though, the IRQ routine tries to access the GFX_INDEX ring causing a call to RREG32 with the value of -1 in radeon_fence_read. This, in turn causes the system to completely hang with some cards, requiring a hard reset. A call stack that can cause such a hang looks like this (using rv515 ASIC for the example here): * rv515_init (rv515.c) * radeon_irq_kms_init (radeon_irq_kms.c) * drm_irq_install (drm_irq.c) * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c) * rs600_irq_process (rs600.c) * radeon_fence_process - due to SW interrupt (radeon_fence.c) * radeon_fence_read (radeon_fence.c) * hang due to RREG32(-1) The patch moves the IRQ installation to the card startup routine, after the ring has been initialized, but before the IRQ has been set. This fixes the issue, but requires a check to see if the IRQ is already installed, as is the case in the system resume codepath. I have tested the patch on three machines using the rv515, the rv770 and the evergreen ASIC. They worked without issues. This seems to be a known issue and has been reported on several bug tracking sites by various distributions (see links below). Most of reports recommend booting the system with KMS disabled and then enabling KMS by reloading the radeon module. For some reason, this was indeed a usable workaround, however, UMS is now deprecated and disabled by default. Bug reports: https://bugzilla.redhat.com/show_bug.cgi?id=845745 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789 https://bbs.archlinux.org/viewtopic.php?id=156964 Signed-off-by: Adis Hamzić <adis@hamzadis.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-05-02drm/radeon: add new richland pci idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-04-23drm/radeon/cayman,TN: add support for golden register init (v2)Alex Deucher
v2: add richland support Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-16drm/radeon: re-enable PTE/PDE packet for set_page on cayman/TNAlex Deucher
PTE/PDE doesn't support a single update (count = 1). We had previously disabled it since it we were hitting that case which let to hangs. The PTE/PDE packet is much more efficient for VM updates where it can be used. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-11drm/radeon: handle broken disabled rb mask gracefullyAlex Deucher
If the disabled rb mask register is not properly initialized program a sane default based on the number of RBs for the asic. This avoids a potential divide by 0 when calculating the backend mask. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon: add UVD tiling addr config v2Christian König
v2: set UVD tiling config for rv730 Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2013-04-09drm/radeon: UVD bringup v8Christian König
Just everything needed to decode videos using UVD. v6: just all the bugfixes and support for R7xx-SI merged in one patch v7: UVD_CGC_GATE is a write only register, lockup detection fix v8: split out VRAM fallback changes, remove support for RV770, add support for HEMLOCK, add buffer sizes checks Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-04-09drm/radeon/dce6: add missing display reg for tiling setupAlex Deucher
A new tiling config register for the display blocks was added on DCE6. May fix: https://bugs.freedesktop.org/show_bug.cgi?id=62889 https://bugs.freedesktop.org/show_bug.cgi?id=57919 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-03-15drm/radeon: add support for Richland APUsAlex Deucher
Richland APUs are a new version of the Trinity APUs with performance and power management improvements. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-03-15drm/radeon: fix backend map setup on 1 RB trinity boardsAlex Deucher
Need to adjust the backend map depending on which RB is enabled. This is the trinity equivalent of: f7eb97300832f4fe5fe916c5d84cd2e25169330e May fix: https://bugs.freedesktop.org/show_bug.cgi?id=57919 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-03-15drm/radeon: fix S/R on VM systems (cayman/TN/SI)Alex Deucher
We weren't properly tearing down the VM sub-alloctor on suspend leading to bogus VM PTs on resume. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60439 Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Dmitry Cherkasov <Dmitrii.Cherkasov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-03-07drm/radeon: skip MC reset as it's probably not hungAlex Deucher
The MC is mostly likely busy (e.g., display requests), not hung so no need to reset it. Doing an MC reset is tricky and not particularly reliable. Fixes hangs in certain cases. Reported-by: Josh Boyer <jwboyer@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-01drm/radeon: use IBs for VM page table updates v2Alex Deucher
For very large page table updates, we can exceed the size of the ring. To avoid this, use an IB to perform the page table update. v2(ck): cleanup the IB infrastructure and the use it instead of filling the struct ourself. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2013-01-31drm/radeon: don't reset the MC on IGPs/APUsAlex Deucher
The MC isn't part of the GPU per se. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31drm/radeon: use the reset mask to determine if rings are hungAlex Deucher
fetch the reset mask and check if the relevant ring flags are set to determine whether the ring is hung or not. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31drm/radeon: halt engines before disabling MC (cayman/TN)Alex Deucher
It's better to halt the engines before we disable the MC. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31drm/radeon: use status regs to determine what to reset (cayman)Alex Deucher
When we attempt the reset the GPU, look at the status registers to determine what blocks need to be reset. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31drm/radeon: rework GPU reset on cayman/TNAlex Deucher
Update the code to better match the recommended programming sequence for soft reset. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-31drm/radeon: add a bios scratch asic hung helperAlex Deucher
Used by all asic families from r600+. Flag for the vbios and later instances of the driver that the GPU is hung. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-24drm/radeon: Enable DMA_IB_SWAP_ENABLE on big endian hosts.Michel Dänzer
Fixes GPU hang during DMA ring IB test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59672 Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-15drm/radeon: clear reset flags if engines are idleAlex Deucher
Fixes a hard lock in the gpu reset code after the rework for DMA support (0ecebb9e0d14e9948e0b1529883a776758117d6f "drm/radeon: switch to a finer grained reset for evergreen") due to not bailing before the MC shutdown if the relevant engines are idle. Discussion: http://lists.freedesktop.org/archives/dri-devel/2013-January/032985.html Reported-by: Eldad Zack <eldad@fogrefinery.com> Tested-by: Eldad Zack <eldad@fogrefinery.com> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-03drm/radeon: switch to a finer grained reset for cayman/TNAlex Deucher
No change in functionality as we currently set all the reset flags. Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-03drm/radeon: reset dma engine on gpu reset (v2)Jerome Glisse
This try to reset the dma engine when performing gpu reset. Hopefully bringing back the gpu dma engine in sane state. v2: agd5f: fix dma reset on cayman/TN, add support for SI Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-03drm/radeon: print dma status reg on lockup (v2)Jerome Glisse
To help debug dma related lockup. v2: agd5f: update SI as well Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-05 07:27:04 +0000