summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/nouveau/nouveau_abi16.c
AgeCommit message (Collapse)Author
2013-11-14drm/nv10-: we no longer need to create nvsw object on user channelsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-11-08drm/nv10: introduce a new NV_11 card typeIlia Mirkin
NV11/17/1F/18 come after NV10/15/16/1A. In order to facilitate using numerical comparisons, split up the two sets into different card types. This change should be a no-op except that the relevant cards will see NV11 printed instead of NV10 for the family. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-10-09drm: Remove pci_vendor and pci_device from struct drm_deviceVille Syrjälä
We can get the PCI vendor and device IDs via dev->pdev. So we can drop the duplicated information. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-09drm/nouveau: embed gem object in nouveau_boDavid Herrmann
There is no reason to keep the gem object separately allocated. nouveau is the last user of gem_obj->driver_private, so if we embed it, we can get rid of 8bytes per gem-object. The implementation follows the radeon driver. bo->gem is only valid, iff the bo was created via the gem helpers _and_ iff the user holds a valid gem reference. That is, as the gem object holds a reference to the nouveau_bo. If you use nouveau_ref() to gain a bo reference, you are not guaranteed to also hold a gem reference. The gem object might get destroyed after the last user drops the gem-ref via drm_gem_object_unreference(). Use drm_gem_object_reference() to gain a gem-reference. For debugging, we can use bo->gem.filp != NULL to test whether a gem-bo is valid. However, this shouldn't be used for real functionality to avoid gem-internal dependencies. Note that the implementation follows the previous style. However, we no longer can check for bo->gem != NULL to test for a valid gem object. This wasn't done before, so we should be safe now. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/nouveau: unpin notify object in chan_finiMaarten Lankhorst
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-26drm/nvc0-: support NOUVEAU_GETPARAM_GRAPH_UNITSChristoph Bumiller
Signed-off-by: Christoph Bumiller <e0425955@student.tuwien.ac.at> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-29drm/nouveau: fix handling empty channel list in ioctl'sMaarten Lankhorst
If there are no channels, chan would never end up being NULL, and so the null pointer check would fail. Solve this by initializing chan to NULL, and iterating over temp instead. Fixes oops when running intel-gpu-tools/tests/kms_flip, which attempts to do some intel ioctl's on a nouveau device. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@vger.kernel.org [3.7+] Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-11drm/nouveau: idle channel before releasing notify objectMarcin Slusarz
Unmapping it while it's still in use (e.g. by M2MF) can lead to page faults and a lot of TRAP_M2MF spam in dmesg. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-12-10Merge branch 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: Pretty minor -next pull request. We some additional new bits waiting internally for release. Hopefully Monday we can get at least some of them out. The others will probably take a few more weeks. Highlights of the current request: - ELD registers for passing audio information to the sound hardware - Handle GPUVM page faults more gracefully - Misc fixes Merge radeon test * 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux: (483 commits) drm/radeon: bump driver version for new info ioctl requests drm/radeon: fix eDP clk and lane setup for scaled modes drm/radeon: add new INFO ioctl requests drm/radeon/dce32+: use fractional fb dividers for high clocks drm/radeon: use cached memory when evicting for vram on non agp drm/radeon: add a CS flag END_OF_FRAME drm/radeon: stop page faults from hanging the system (v2) drm/radeon/dce4/5: add registers for ELD handling drm/radeon/dce3.2: add registers for ELD handling radeon: fix pll/ctrc mapping on dce2 and dce3 hardware Linux 3.7-rc7 powerpc/eeh: Do not invalidate PE properly Revert "drm/i915: enable rc6 on ilk again" ALSA: hda - Fix build without CONFIG_PM of/address: sparc: Declare of_iomap as an extern function for sparc again PM / QoS: fix wrong error-checking condition bnx2x: remove redundant warning log vxlan: fix command usage in its doc 8139cp: revert "set ring address before enabling receiver" MPI: Fix compilation on MIPS with GCC 4.4 and newer ... Conflicts: drivers/gpu/drm/exynos/exynos_drm_encoder.c drivers/gpu/drm/exynos/exynos_drm_fbdev.c drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
2012-11-29drm/nve0: allow specification of channel engine type in abi16 callBen Skeggs
Previously, if either vram/gart handles were specified as ~0, the ioctl call would fail. In order to hack engine selection into the ioctl for kepler, we now define (fb_ctxdma_handle == ~0) to mean "engine mask is in tt_ctxdma_handle". This approach also allows new userspace to detect lack of support for non-PGRAPH channels on older kernels. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-29drm/nv50/dmaobj: extend class to allow gpu-specific attributes to be definedBen Skeggs
disp is going to need to be able to create more specific dma objects than was previously possible. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-11-19drm/nouveau: fix crash with noaccel=1Marcin Slusarz
Reported-by: Ortwin Glück <odi@odi.ch> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-03drm/nve0: use async copy engine for ttm buffer moves if availableBen Skeggs
Kepler PFIFO lost the ability to address multiple engines from a single channel, so we need a separate one for the copy engine. v2: Marcin Slusarz <marcin.slusarz@gmail.com> - regression fix: restore hw accelerated buffer copies Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-03drm/nouveau: port all engines to new engine module formatBen Skeggs
This is a HUGE commit, but it's not nearly as bad as it looks - any problems can be isolated to a particular chipset and engine combination. It was simply too difficult to port each one at a time, the compat layers are *already* ridiculous. Most of the changes here are simply to the glue, the process for each of the engine modules was to start with a standard skeleton and copy+paste the old code into the appropriate places, fixing up variable names etc as needed. v2: Marcin Slusarz <marcin.slusarz@gmail.com> - fix find/replace bug in license header v3: Ben Skeggs <bskeggs@redhat.com> - bump indirect pushbuf size to 8KiB, 4KiB barely enough for userspace and left no space for kernel's requirements during GEM pushbuf submission. - fix duplicate assignments noticed by clang v4: Marcin Slusarz <marcin.slusarz@gmail.com> - add sparse annotations to nv04_fifo_pause/nv04_fifo_start - use ioread32_native/iowrite32_native for fifo control registers v5: Ben Skeggs <bskeggs@redhat.com> - rebase on v3.6-rc4, modified to keep copy engine fix intact - nv10/fence: unmap fence bo before destroying - fixed fermi regression when using nvidia gr fuc - fixed typo in supported dma_mask checking Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-03drm/nouveau/timer: port to subdev interfacesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-03drm/nouveau: restructure source tree, split core from drm implementationBen Skeggs
Future work will be headed in the way of separating the policy supplied by the nouveau drm module from the mechanisms provided by the driver core. There will be a couple of major classes (subdev, engine) of driver modules that have clearly defined tasks, and the further directory structure change is to reflect this. No code changes here whatsoever, aside from fixing up a couple of include file pathnames. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-09-26drm/nouveau: silence a debug message triggered by newer userspaceBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-07-26drm/nouveau: mark most of our ioctls as deprecated, move to compat layerBen Skeggs
These will be replaced in the near future, the code isn't yet stable enough for this merge window however. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>