summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/i915_perf.c
AgeCommit message (Collapse)Author
2019-02-05drm/i915/perf: lock powergating configuration to default when activeLionel Landwerlin
If some of the contexts submitting workloads to the GPU have been configured to shutdown slices/subslices, we might loose the NOA configurations written in the NOA muxes. One possible solution to this problem is to reprogram the NOA muxes when we switch to a new context. We initially tried this in the workaround batchbuffer but some concerns where raised about the cost of reprogramming at every context switch. This solution is also not without consequences from the userspace point of view. Reprogramming of the muxes can only happen once the powergating configuration has changed (which happens after context switch). This means for a window of time during the recording, counters recorded by the OA unit might be invalid. This requires userspace dealing with OA reports to discard the invalid values. Minimizing the reprogramming could be implemented by tracking of the last programmed configuration somewhere in GGTT and use MI_PREDICATE to discard some of the programming commands, but the command streamer would still have to parse all the MI_LRI instructions in the workaround batchbuffer. Another solution, which this change implements, is to simply disregard the user requested configuration for the period of time when i915/perf is active. On most platforms there are no issues with this apart from a performance penality for some media workloads that benefit from running on a partially powergated GPU. We already prevent RC6 from affecting the programming so it doesn't sound completely unreasonable to hold on powergating for the same reason. On Icelake however there would a functional problem if the slices not- containing the VME block were left enabled with a running media workload which explicitly disabled them. To avoid a GPU hang in this case, on Icelake we lock the enablement to only slices which contain VME blocks. Downside is that it means degraded GPU performance when OA is active but there is no known alternative solution for this. v2: Leave RPCS programming in intel_lrc.c (Lionel) v3: Update for s/union intel_sseu/struct intel_sseu/ (Lionel) More to_intel_context() (Tvrtko) s/dev_priv/i915/ (Tvrtko) Tvrtko Ursulin: v4: * Rebase for make_rpcs changes. v5: * Apply OA restriction from make_rpcs directly. v6: * Rebase for context image setup changes. v7: * Move stream assignment before metric enable. v8-9: * Rebase. v10: * Squashed with ICL support patch. Bspec: 21140 Co-developed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v9 Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190205095032.22673-2-tvrtko.ursulin@linux.intel.com
2019-01-17drm/i915: small isolated c99 types to kernel types switchJani Nikula
Mixed C99 and kernel types use is getting ugly. Prefer kernel types. sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g' Minor checkpatch fixes sprinkled on top of the changed lines. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/14ed72e7f04c9340a057855c5950b54811f8a477.1547629303.git.jani.nikula@intel.com
2019-01-14drm/i915/perf: Track the rpm wakerefChris Wilson
Keep track of our wakeref used to keep the device awake so we can catch any leak. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-7-chris@chris-wilson.co.uk
2019-01-14drm/i915: Markup paired operations on wakerefsChris Wilson
The majority of runtime-pm operations are bounded and scoped within a function; these are easy to verify that the wakeref are handled correctly. We can employ the compiler to help us, and reduce the number of wakerefs tracked when debugging, by passing around cookies provided by the various rpm_get functions to their rpm_put counterpart. This makes the pairing explicit, and given the required wakeref cookie the compiler can verify that we pass an initialised value to the rpm_put (quite handy for double checking error paths). For regular builds, the compiler should be able to eliminate the unused local variables and the program growth should be minimal. Fwiw, it came out as a net improvement as gcc was able to refactor rpm_get and rpm_get_if_in_use together, v2: Just s/rpm_put/rpm_put_unchecked/ everywhere, leaving the manual mark up for smaller more targeted patches. v3: Mention the cookie in Returns Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-2-chris@chris-wilson.co.uk
2019-01-08Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Generally catch up with 5.0-rc1, and specifically get the changes: 96d4f267e40f ("Remove 'type' argument from access_ok() function") 0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case") 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'") Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-02drm/i915: start moving runtime device info to a separate structJani Nikula
First move the low hanging fruit, the fields that are only initialized runtime. Use RUNTIME_INFO() exclusively to access the fields. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c24fe7a4b0492a888690c46814c0ff21ce2f12b1.1546267488.git.jani.nikula@intel.com
2018-12-12drm/i915: merge gen checks to use rangeLucas De Marchi
Instead of using IS_GEN() for consecutive gen checks, let's pass the range to IS_GEN_RANGE(). By code inspection these were the ranges deemed necessary for spatch: @@ expression e; @@ ( - IS_GEN(e, 3) || IS_GEN(e, 2) + IS_GEN_RANGE(e, 2, 3) | - IS_GEN(e, 3) || IS_GEN(e, 4) + IS_GEN_RANGE(e, 3, 4) | - IS_GEN(e, 5) || IS_GEN(e, 6) + IS_GEN_RANGE(e, 5, 6) | - IS_GEN(e, 6) || IS_GEN(e, 7) + IS_GEN_RANGE(e, 6, 7) | - IS_GEN(e, 7) || IS_GEN(e, 8) + IS_GEN_RANGE(e, 7, 8) | - IS_GEN(e, 8) || IS_GEN(e, 9) + IS_GEN_RANGE(e, 8, 9) | - IS_GEN(e, 10) || IS_GEN(e, 9) + IS_GEN_RANGE(e, 9, 10) | - IS_GEN(e, 9) || IS_GEN(e, 10) + IS_GEN_RANGE(e, 9, 10) ) After conversion, checking we don't have any missing IS_GEN_RANGE() || IS_GEN() was also done. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-3-lucas.demarchi@intel.com
2018-12-12drm/i915: replace IS_GEN<N> with IS_GEN(..., N)Lucas De Marchi
Define IS_GEN() similarly to our IS_GEN_RANGE(). but use gen instead of gen_mask to do the comparison. Now callers can pass then gen as a parameter, so we don't require one macro for each gen. The following spatch was used to convert the users of these macros: @@ expression e; @@ ( - IS_GEN2(e) + IS_GEN(e, 2) | - IS_GEN3(e) + IS_GEN(e, 3) | - IS_GEN4(e) + IS_GEN(e, 4) | - IS_GEN5(e) + IS_GEN(e, 5) | - IS_GEN6(e) + IS_GEN(e, 6) | - IS_GEN7(e) + IS_GEN(e, 7) | - IS_GEN8(e) + IS_GEN(e, 8) | - IS_GEN9(e) + IS_GEN(e, 9) | - IS_GEN10(e) + IS_GEN(e, 10) | - IS_GEN11(e) + IS_GEN(e, 11) ) v2: use IS_GEN rather than GT_GEN and compare to info.gen rather than using the bitmask Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-2-lucas.demarchi@intel.com
2018-12-12drm/i915: Rename IS_GEN to IS_GEN_RANGELucas De Marchi
RANGE makes it longer, but clearer. We are also going to add a macro to check an individual gen, so add the _RANGE prefix here. Diff generated with: sed 's/IS_GEN(/IS_GEN_RANGE(/g' drivers/gpu/drm/i915/{*/,}*.{c,h} -i v2: use IS_GEN rather than GT_GEN Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-1-lucas.demarchi@intel.com
2018-11-19Revert "drm/i915/perf: Fix warning in documentation"Joonas Lahtinen
Userspace portion is still missing. This reverts commit 9fa6e2f7609fdbb7d6f86be86371a5719bec0376. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181116135510.13807-2-joonas.lahtinen@linux.intel.com
2018-11-19Revert "drm/i915/perf: add a parameter to control the size of OA buffer"Joonas Lahtinen
Userspace portion is still missing. This reverts commit cd956bfcd0f58d20485ac0a785415f7d9327a95f. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181116135510.13807-1-joonas.lahtinen@linux.intel.com
2018-10-24drm/i915/perf: Fix warning in documentationLionel Landwerlin
Forgot to add the description of this option in a previous commit. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: cd956bfcd0f58d ("drm/i915/perf: add a parameter to control the size of OA buffer") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181024105158.4732-1-lionel.g.landwerlin@intel.com
2018-10-23drm/i915/perf: add a parameter to control the size of OA bufferLionel Landwerlin
The way our hardware is designed doesn't seem to let us use the MI_RECORD_PERF_COUNT command without setting up a circular buffer. In the case where the user didn't request OA reports to be available through the i915 perf stream, we can set the OA buffer to the minimum size to avoid consuming memory which won't be used by the driver. v2: Simplify oa buffer size exponent selection (Chris) Reuse vma size field (Lionel) v3: Restrict size opening parameter to values supported by HW (Chris) v4: Drop out of date comment (Matt) Add debug message when buffer size is rejected (Matt) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-5-lionel.g.landwerlin@intel.com
2018-10-23drm/i915/perf: pass stream to vfuncs when possibleLionel Landwerlin
We want to use some of the properties of the perf stream to program the hardware in a later commit. v2: Pass only perf stream as argument (Matthew) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-4-lionel.g.landwerlin@intel.com
2018-10-23drm/i915/perf: remove redundant oa buffer initializationLionel Landwerlin
We initialize the OA buffer everytime we enable the OA unit (first call in gen[78]_oa_enable), so we don't need to initialize when preparing the metric set. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023100707.31738-3-lionel.g.landwerlin@intel.com
2018-09-14drm/i915/execlists: Use coherent writes into the context imageChris Wilson
That we use a WB mapping for updating the RING_TAIL register inside the context image even on !llc machines has been a source of consternation for every reader. It appears to work on bsw+, but it may just have been that we have been incredibly bad at detecting the errors. v2: With extra enthusiasm. v3: Drop force of map type for pinned default_state as by the time we pin it, the map type is always WB and doesn't conflict with the earlier use by ce->state. v4: Transfer engine->default_state from MAP_WC to MAP_WB on creation so we do not need the MAP_FORCE littered around the backends Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180914123504.2062-3-chris@chris-wilson.co.uk
2018-09-13i915/oa: Simplify updating contextsTvrtko Ursulin
We can remove the update-via-batch-buffer code path, which is basically an effective duplicate of update-via-context-image path, if we notice that after we have idled the GPU, we can update the context image even of the kernel context directly. (Update-via-batch-buffer path existed only to solve the problem of how to update the kernel context image.) Only additional thing needed is to activate the edited configuration by sending one empty request down the pipe. This accomplishes context restore of the updated kernel context and so the OA configuration gets written out to it's control registers. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180912152930.28237-1-tvrtko.ursulin@linux.intel.com
2018-08-31drm/i915/perf: reuse intel_lrc ctx regs macroLionel Landwerlin
Abstract the context image access a bit. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180813080218.28994-3-tvrtko.ursulin@linux.intel.com
2018-08-31drm/i915/perf: simplify configure all context functionLionel Landwerlin
We don't need any special treatment on error so just return as soon as possible. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180813080218.28994-2-tvrtko.ursulin@linux.intel.com
2018-07-24drm/i915: Pull unpin map into vma releaseChris Wilson
A reasonably common operation is to pin the map of the vma alongside the vma itself for the lifetime of the vma, and so release both pins at the same time as destroying the vma. It is common enough to pull into the release function, making that central function more attractive to a couple of other callsites. The continual ulterior motive is to sweep over errors on module load aborting... Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180721125037.20127-1-chris@chris-wilson.co.uk
2018-07-09drm/i915: Provide a timeout to i915_gem_wait_for_idle()Chris Wilson
Usually we have no idea about the upper bound we need to wait to catch up with userspace when idling the device, but in a few situations we know the system was idle beforehand and can provide a short timeout in order to very quickly catch a failure, long before hangcheck kicks in. In the following patches, we will use the timeout to curtain two overly long waits, where we know we can expect the GPU to complete within a reasonable time or declare it broken. In particular, with a broken GPU we expect it to fail during the initial GPU setup where do a couple of context switches to record the defaults. This is a task that takes a few milliseconds even on the slowest of devices, but we may have to wait 60s for hangcheck to give in and declare the machine inoperable. In this a case where any gpu hang is unacceptable, both from a timeliness and practical standpoint. The other improvement is that in selftests, we do not need to arm an independent timer to inject a wedge, as we can just limit the timeout on the wait directly. v2: Include the timeout parameter in the trace. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709122044.7028-1-chris@chris-wilson.co.uk
2018-06-14drm/i915/perf: make oa format tables constJani Nikula
No reason not to be const. Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180613114929.14541-1-jani.nikula@intel.com
2018-06-11drm/i915/perf: fix gen11 engine class shiftMichel Thierry
Use the correct engine class shift value while storing the ctx hw id. Fixes the copy+paste error from commit 61d5676b5561 ("drm/i915/perf: fix ctx_id read with GuC & ICL"). Apologies for not spotting this in the original review, the specific_ctx_id_mask is correct, only the specific_ctx_id had this problem. v2: Just use the upper 32 bits of lrc_desc (Chris) v3: If we use the lrc_desc, we must apply the ctx_id_mask too (Lionel) Fixes: 61d5676b5561 ("drm/i915/perf: fix ctx_id read with GuC & ICL") Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180604233250.609-2-michel.thierry@intel.com
2018-06-11drm/i915/perf: use the lrc_desc to get the ctx hw id in gen8-10Michel Thierry
The upper 32 bits of the lrc_desc (bits 52-32 to be precise) are the context hw id in GEN8-10, so use them and have one less thing to maintain in the unlikely case we change the descriptor sw fields. v2: If we use the lrc_desc, we must apply the ctx_id_mask too (Lionel) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180604233250.609-1-michel.thierry@intel.com
2018-06-04drm/i915/perf: fix ctx_id read with GuC & ICLLionel Landwerlin
One thing we didn't really understand about the OA report is that the ContextID field (dword 2) is copy of the context descriptor (dword 1). On Gen8->10 and without using GuC we didn't notice the issue because we only checked the 21bits of the ContextID field in the OA reports which matches exactly the hw_id stored into the context descriptor. When using GuC submission we have an issue of a non matching hw_id because GuC uses bit 20 of the hw_id to signal proxy submission. This change introduces a mask to compare only the relevant bits. On ICL the context descriptor format has changed and we failed to address this. On top of using a mask we also need to shift the bits properly. v2: Reuse lrc_desc rather than recomputing part of it (Chris/Michel) v3: Always pin the context we're filtering with (Chris) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 1de401c08fa805 ("drm/i915/perf: enable perf support on ICL") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104252 BSpec: 1237 Testcase: igt/perf/gen8-unprivileged-single-ctx-counters Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180602112946.30803-3-lionel.g.landwerlin@intel.com Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org
2018-05-18drm/i915: Store a pointer to intel_context in i915_requestChris Wilson
To ease the frequent and ugly pointer dance of &request->gem_context->engine[request->engine->id] during request submission, store that pointer as request->hw_context. One major advantage that we will exploit later is that this decouples the logical context state from the engine itself. v2: Set mock_context->ops so we don't crash and burn in selftests. Cleanups from Tvrtko. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180517212633.24934-3-chris@chris-wilson.co.uk
2018-05-11drm/i915/oa: Check that OA is disabled before unpinningChris Wilson
Before we unpin the buffer used for OA reports and return it to the system, we need to be sure that the HW has finished writing into it. For lack of a better idea, poll OACONTROL to check it is switched off. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106379 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180511135207.12880-1-chris@chris-wilson.co.uk
2018-05-02drm/i915: Split i915_gem_timeline into individual timelinesChris Wilson
We need to move to a more flexible timeline that doesn't assume one fence context per engine, and so allow for a single timeline to be used across a combination of engines. This means that preallocating a fence context per engine is now a hindrance, and so we want to introduce the singular timeline. From the code perspective, this has the notable advantage of clearing up a lot of mirky semantics and some clumsy pointer chasing. By splitting the timeline up into a single entity rather than an array of per-engine timelines, we can realise the goal of the previous patch of tracking the timeline alongside the ring. v2: Tweak wait_for_idle to stop the compiling thinking that ret may be uninitialised. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502163839.3248-2-chris@chris-wilson.co.uk
2018-04-30drm/i915: Wrap engine->context_pin() and engine->context_unpin()Chris Wilson
Make life easier in upcoming patches by moving the context_pin and context_unpin vfuncs into inline helpers. v2: Fixup mock_engine to mark the context as pinned on use. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180430131503.5375-2-chris@chris-wilson.co.uk
2018-03-29drm/i915/perf: add more debug message on perf open & configsLionel Landwerlin
This will make it easier to spot issues related to config creation/usage. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-9-lionel.g.landwerlin@intel.com
2018-03-29drm/i915: rename PPGTT/GGTT fields OA registersLionel Landwerlin
We had a generic field name used across 2 registers but it feels like it's clearer we make it obvious what register this field belongs to. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-7-lionel.g.landwerlin@intel.com
2018-03-29drm/i915/perf: remove empty lineLionel Landwerlin
This was added by mistake in commit 28964cf25ee67 ("drm/i915/perf: disable NOA logic when not used"). Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-6-lionel.g.landwerlin@intel.com
2018-03-29drm/i915/perf: simplify OA unit enabling on gen7Lionel Landwerlin
In commit d79651522e89c ("drm/i915: Enable i915 perf stream for Haswell OA unit") the enable/disable vfunc hadn't appear yet and the same function would deal with enabling/disabling the OA unit. This was split later on for gen8 but the gen7 retained some code that isn't actually useful anymore. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-4-lionel.g.landwerlin@intel.com
2018-03-29drm/i915/perf: check the value of PROP_SAMPLE_OA uapi parameterLionel Landwerlin
We've been a bit loose about this opening parameter. We should only add the flag for writing OA reports when the value of this parameter is != 0. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180326090831.22686-3-lionel.g.landwerlin@intel.com
2018-03-29drm/i915/perf: enable perf support on ICLLionel Landwerlin
No significant changes from either context offsets, nor report formats, nor register whitelist. v2: Also drop slice/unslice clock ratio changes (Matt) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180326133949.12469-3-lionel.g.landwerlin@intel.com
2018-03-01drm/i915/perf: fix perf stream opening lockLionel Landwerlin
We're seeing on CI that some contexts don't have the programmed OA period timer that directs the OA unit on how often to write reports. The issue is that we're not holding the drm lock from when we edit the context images down to when we set the exclusive_stream variable. This leaves a window for the deferred context allocation to call i915_oa_init_reg_state() that will not program the expected OA timer value, because we haven't set the exclusive_stream yet. v2: Drop need_lock from gen8_configure_all_contexts() (Matt) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 701f8231a2f ("drm/i915/perf: prune OA configs") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102254 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103715 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103755 Link: https://patchwork.freedesktop.org/patch/msgid/20180301110613.1737-1-lionel.g.landwerlin@intel.com Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.14+
2018-03-01Merge drm-next into drm-intel-next-queued (this time for real)Joonas Lahtinen
To pull in the HDCP changes, especially wait_for changes to drm/i915 that Chris wants to build on top of. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-02-21drm/i915: Rename drm_i915_gem_request to i915_requestChris Wilson
We want to de-emphasize the link between the request (dependency, execution and fence tracking) from GEM and so rename the struct from drm_i915_gem_request to i915_request. That is we may implement the GEM user interface on top of requests, but they are an abstraction for tracking execution rather than an implementation detail of GEM. (Since they are not tied to HW, we keep the i915 prefix as opposed to intel.) In short, the spatch: @@ @@ - struct drm_i915_gem_request + struct i915_request A corollary to contracting the type name, we also harmonise on using 'rq' shorthand for local variables where space if of the essence and repetition makes 'request' unwieldy. For globals and struct members, 'request' is still much preferred for its clarity. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221095636.6649-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This seems to have been a comparatively quieter merge window, I assume due to holidays etc. The "biggest" change is AMD header cleanups, which merge/remove a bunch of them. The AMD gpu scheduler is now being made generic with the etnaviv driver wanting to reuse the code, hopefully other drivers can go in the same direction. Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff elsewhere. Core: - Add .last_close and .output_poll_changed helpers to reduce driver footprints - Fix plane clipping - Improved debug printing support - Add panel orientation property - Update edid derived properties at edid setting - Reduction in fbdev driver footprint - Move amdgpu scheduler into core for other drivers to use. i915: - Selftest and IGT improvements - Fast boot prep work on IPS, pipe config - HW workarounds for Cannonlake, Geminilake - Cannonlake clock and HDMI2.0 fixes - GPU cache invalidation and context switch improvements - Display planes cleanup - New PMU interface for perf queries - New firmware support for KBL/SKL - Geminilake HW workaround for perforamce - Coffeelake stolen memory improvements - GPU reset robustness work - Cannonlake horizontal plane flipping - GVT work amdgpu/radeon: - RV and Vega header file cleanups (lots of lines gone!) - TTM operation context support - 48-bit GPUVM support for Vega/RV - ECC support for Vega - Resizeable BAR support - Multi-display sync support - Enable swapout for reserved BOs during allocation - S3 fixes on Raven - GPU reset cleanup and fixes - 2+1 level GPU page table amdkfd: - GFX7/8 SDMA user queues support - Hardware scheduling for multiple processes - dGPU prep work rcar: - Added R8A7743/5 support - System suspend/resume support sun4i: - Multi-plane support for YUV formats - A83T and LVDS support msm: - Devfreq support for GPU tegra: - Prep work for adding Tegra186 support - Tegra186 HDMI support - HDMI2.0 and zpos support by using generic helpers tilcdc: - Misc fixes omapdrm: - Support memory bandwidth limits - DSI command mode panel cleanups - DMM error handling exynos: - drop the old IPP subdriver. etnaviv: - Occlusion query fixes - Job handling fixes - Prep work for hooking in gpu scheduler armada: - Move closer to atomic modesetting - Allow disabling primary plane if overlay is full screen imx: - Format modifier support - Add tile prefetch to PRE - Runtime PM support for PRG ast: - fix LUT loading" * tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits) drm/ast: Load lut in crtc_commit drm: Check for lessee in DROP_MASTER ioctl drm: fix gpu scheduler link order drm/amd/display: Demote error print to debug print when ATOM impl missing dma-buf: fix reservation_object_wait_timeout_rcu once more v2 drm/amdgpu: Avoid leaking PM domain on driver unbind (v2) drm/amd/amdgpu: Add Polaris version check drm/amdgpu: Reenable manual GPU reset from sysfs drm/amdgpu: disable MMHUB power gating on raven drm/ttm: Don't unreserve swapped BOs that were previously reserved drm/ttm: Don't add swapped BOs to swap-LRU list drm/amdgpu: only check for ECC on Vega10 drm/amd/powerplay: Fix smu_table_entry.handle type drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig drm/radeon: fill in rb backend map on evergreen/ni. drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2) drm/ttm: only free pages rather than update global memory count together drm/amdgpu: fix CPU based VM updates drm/amdgpu: fix typo in amdgpu_vce_validate_bo ...
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-20drm/i915: Remove i915.enable_execlists module parameterChris Wilson
Execlists and legacy ringbuffer submission are no longer feature comparable (execlists now offer greater functionality that should overcome their performance hit) and obsoletes the unsafe module parameter, i.e. comparing the two modes of execution is no longer useful, so remove the debug tool. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #i915_perf.c Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-1-chris@chris-wilson.co.uk
2017-11-20drm/i915/perf: reuse timestamp frequency from device infoLionel Landwerlin
Now that we have this stored in the device info, we can drop it from perf part of the driver. Note that this requires to init perf after we've computed the frequency, hence why we move i915_perf_init() from i915_driver_init_early() to after intel_device_info_runtime_init(). v2: Use div_u64 (Chris) v3: Drop u64 divs by switching to kHz (Chris/Ville) Move i915_perf_fini to i915_driver_cleanup_hw (Matthew) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113181902.12411-2-lionel.g.landwerlin@intel.com
2017-11-20drm/i915: Automatic i915_switch_context for legacyChris Wilson
During request construction, after pinning the context we know whether or not we have to emit a context switch. So move this common operation from every caller into i915_gem_request_alloc() itself. v2: Always submit the request if we emitted some commands during request construction, as typically it also involves changes in global state. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171120102002.22254-2-chris@chris-wilson.co.uk
2017-11-20drm/i915/perf: replace .reg accesses with i915_mmio_reg_offsetLionel Landwerlin
This replaces accesses to the reg field of the i915_reg_t structure with the i915_mmio_reg_offset() inline function. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Ewelina Musial <ewelina.musial@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113233455.12085-2-lionel.g.landwerlin@intel.com
2017-11-13drm/i915/perf: enable perf support on CNLLionel Landwerlin
This adds new registers to the whitelist to configs emitted from userspace. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171110190845.32574-6-lionel.g.landwerlin@intel.com
2017-11-13drm/i915/perf: refactor perf setupLionel Landwerlin
Gen8/9 aren't very different and we can merge some of this code. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171110190845.32574-4-lionel.g.landwerlin@intel.com
2017-11-13drm/i915/perf: add support for Coffeelake GT3Lionel Landwerlin
We can enable GT3 as well as GT2. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171110190845.32574-3-lionel.g.landwerlin@intel.com
2017-11-13drm/i915/perf: complete whitelisting for OA programming on HSWLionel Landwerlin
We were missing some registers and also can name one for which we only had the offset. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171110190845.32574-2-lionel.g.landwerlin@intel.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-21 07:44:32 +0000