| Age | Commit message (Collapse) | Author |
|---|
|
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304092908.57382-2-andriy.shevchenko@linux.intel.com
|
|
g33/i964g/g45 are the exceptional cases when it comes to
the swizzle detection. Let's reorder the code to handle
them first and let everything else be handled by the
else branch. This allows us to unset .is_mobile for the
desktop PNV variant (which supposedly must follow the
"mobile" path here).
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318165633.28924-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
The idea of taking the reset lock around writing the fence register was
to serialise the mmio write we also perform during the reset where those
registers get clobbered. However, the lock is overkill as write tearing
between reset and fence_update() is harmless; the final value of the
fence register is the same. A race between revoke_fences() and
fence_update() is also harmless at this point as on the fault path where
this is necessary, we acquire the reset lock to coordinate ourselves in
the upper layer.
The danger of acquiring the reset lock again in fence_update() is that
we may recurse from the shrinker along the i915_gem_fault() path.
<4> [125.739646] ============================================
<4> [125.739652] WARNING: possible recursive locking detected
<4> [125.739659] 5.0.0-rc6-ga6e4cbf00557-drmtip_223+ #1 Tainted: G U
<4> [125.739666] --------------------------------------------
<4> [125.739672] gem_mmap_gtt/1017 is trying to acquire lock:
<4> [125.739679] 00000000a730190a (&dev_priv->gpu_error.reset_backoff_srcu){+.+.}, at: i915_reset_trylock+0x0/0x310 [i915]
<4> [125.739848]
but task is already holding lock:
<4> [125.739854] 00000000a730190a (&dev_priv->gpu_error.reset_backoff_srcu){+.+.}, at: i915_reset_trylock+0x192/0x310 [i915]
<4> [125.739918]
other info that might help us debug this:
<4> [125.739925] Possible unsafe locking scenario:
<4> [125.739930] CPU0
<4> [125.739934] ----
<4> [125.739937] lock(&dev_priv->gpu_error.reset_backoff_srcu);
<4> [125.739944] lock(&dev_priv->gpu_error.reset_backoff_srcu);
<4> [125.739950]
*** DEADLOCK ***
<4> [125.739958] May be due to missing lock nesting notation
<4> [125.739966] 5 locks held by gem_mmap_gtt/1017:
<4> [125.739972] #0: 00000000471f682c (&mm->mmap_sem){++++}, at: __do_page_fault+0x133/0x500
<4> [125.739987] #1: 0000000026542685 (&dev->struct_mutex){+.+.}, at: i915_gem_fault+0x1f6/0x860 [i915]
<4> [125.740061] #2: 00000000a730190a (&dev_priv->gpu_error.reset_backoff_srcu){+.+.}, at: i915_reset_trylock+0x192/0x310 [i915]
<4> [125.740126] #3: 00000000c828eb4f (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.25+0x0/0x30
<4> [125.740140] #4: 000000002d360d65 (shrinker_rwsem){++++}, at: shrink_slab+0x1cb/0x2c0
<4> [125.740151]
stack backtrace:
<4> [125.740159] CPU: 1 PID: 1017 Comm: gem_mmap_gtt Tainted: G U 5.0.0-rc6-ga6e4cbf00557-drmtip_223+ #1
<4> [125.740170] Hardware name: Dell Inc. OptiPlex 745 /0GW726, BIOS 2.3.1 05/21/2007
<4> [125.740180] Call Trace:
<4> [125.740189] dump_stack+0x67/0x9b
<4> [125.740199] __lock_acquire+0xc75/0x1b00
<4> [125.740209] ? arch_tlb_finish_mmu+0x2a/0xa0
<4> [125.740216] ? tlb_finish_mmu+0x1a/0x30
<4> [125.740222] ? zap_page_range_single+0xe2/0x130
<4> [125.740230] ? lock_acquire+0xa6/0x1c0
<4> [125.740237] lock_acquire+0xa6/0x1c0
<4> [125.740296] ? i915_clear_error_registers+0x280/0x280 [i915]
<4> [125.740357] i915_reset_trylock+0x44/0x310 [i915]
<4> [125.740417] ? i915_clear_error_registers+0x280/0x280 [i915]
<4> [125.740426] ? lockdep_hardirqs_on+0xe0/0x1b0
<4> [125.740434] ? _raw_spin_unlock_irqrestore+0x39/0x60
<4> [125.740499] fence_update+0x218/0x470 [i915]
<4> [125.740571] i915_vma_unbind+0xa6/0x550 [i915]
<4> [125.740640] i915_gem_object_unbind+0xfa/0x190 [i915]
<4> [125.740711] i915_gem_shrink+0x2dc/0x590 [i915]
<4> [125.740722] ? ___preempt_schedule+0x16/0x18
<4> [125.740792] ? i915_gem_shrinker_scan+0xc9/0x130 [i915]
<4> [125.740861] i915_gem_shrinker_scan+0xc9/0x130 [i915]
<4> [125.740870] do_shrink_slab+0x143/0x3f0
<4> [125.740878] shrink_slab+0x228/0x2c0
<4> [125.740886] shrink_node+0x167/0x450
<4> [125.740894] do_try_to_free_pages+0xc4/0x340
<4> [125.740902] try_to_free_pages+0xdc/0x2e0
<4> [125.740911] __alloc_pages_nodemask+0x662/0x1110
<4> [125.740921] ? reacquire_held_locks+0xb5/0x1b0
<4> [125.740928] ? reacquire_held_locks+0xb5/0x1b0
<4> [125.740986] ? i915_reset_trylock+0x192/0x310 [i915]
<4> [125.741045] ? i915_memcpy_init_early+0x30/0x30 [i915]
<4> [125.741054] pte_alloc_one+0x12/0x70
<4> [125.741060] __pte_alloc+0x11/0xf0
<4> [125.741067] apply_to_page_range+0x37e/0x440
<4> [125.741127] remap_io_mapping+0x6c/0x100 [i915]
<4> [125.741196] i915_gem_fault+0x5a9/0x860 [i915]
<4> [125.741204] ? ptlock_alloc+0x15/0x30
<4> [125.741212] __do_fault+0x2c/0xb0
<4> [125.741218] __handle_mm_fault+0x8ee/0xfa0
<4> [125.741227] handle_mm_fault+0x196/0x3a0
<4> [125.741235] __do_page_fault+0x246/0x500
<4> [125.741243] ? page_fault+0x8/0x30
<4> [125.741250] page_fault+0x1e/0x30
<4> [125.741256] RIP: 0033:0x55d0cc456e12
<4> [125.741264] Code: b0 df ff ff 89 c2 8b 85 70 df ff ff 01 c2 8b 85 70 df ff ff 48 98 48 8d 0c 85 00 00 00 00 48 8b 85 e0 df ff ff 48 01 c8 f7 d2 <89> 10 83 85 70 df ff ff 01 81 bd 70 df ff ff ff 03 00 00 7e be 48
<4> [125.741280] RSP: 002b:00007ffc1bab7ab0 EFLAGS: 00010206
<4> [125.741287] RAX: 00007fc787cb6000 RBX: 0000000000000000 RCX: 0000000000000000
<4> [125.741295] RDX: 00000000ffffffff RSI: 0000000000005401 RDI: 0000000000000002
<4> [125.741303] RBP: 00007ffc1bab9b70 R08: 00007ffc1bab7920 R09: 000000000000001b
<4> [125.741310] R10: 7165722074736554 R11: 0000000000000246 R12: 000055d0cc454a80
<4> [125.741318] R13: 00007ffc1bab9f60 R14: 0000000000000000 R15: 0000000000000000
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109665
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-4-chris@chris-wilson.co.uk
|
|
Previously, we were able to rely on the recursive properties of
struct_mutex to allow us to serialise revoking mmaps and reacquiring the
FENCE registers with them being clobbered over a global device reset.
I then proceeded to throw out the baby with the bath water in order to
pursue a struct_mutex-less reset.
Perusing LWN for alternative strategies, the dilemma on how to serialise
access to a global resource on one side was answered by
https://lwn.net/Articles/202847/ -- Sleepable RCU:
1 int readside(void) {
2 int idx;
3 rcu_read_lock();
4 if (nomoresrcu) {
5 rcu_read_unlock();
6 return -EINVAL;
7 }
8 idx = srcu_read_lock(&ss);
9 rcu_read_unlock();
10 /* SRCU read-side critical section. */
11 srcu_read_unlock(&ss, idx);
12 return 0;
13 }
14
15 void cleanup(void)
16 {
17 nomoresrcu = 1;
18 synchronize_rcu();
19 synchronize_srcu(&ss);
20 cleanup_srcu_struct(&ss);
21 }
No more worrying about stop_machine, just an uber-complex mutex,
optimised for reads, with the overhead pushed to the rare reset path.
However, we do run the risk of a deadlock as we allocate underneath the
SRCU read lock, and the allocation may require a GPU reset, causing a
dependency cycle via the in-flight requests. We resolve that by declaring
the driver wedged and cancelling all in-flight rendering.
v2: Use expedited rcu barriers to match our earlier timing
characteristics.
v3: Try to annotate locking contexts for sparse
v4: Reduce selftest lock duration to avoid a reset deadlock with fences
v5: s/srcu/reset_backoff_srcu/
v6: Remove more stale comments
Testcase: igt/gem_mmap_gtt/hang
Fixes: eb8d0f5af4ec ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-2-chris@chris-wilson.co.uk
|
|
Currently, we may simultaneously release the fence register from both
fence_update() and i915_gem_restore_fences(). This is dangerous, so
defer the bookkeeping entirely to i915_gem_restore_fences() when the
device is asleep.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-1-chris@chris-wilson.co.uk
|
|
Looking forward, we need to break the struct_mutex dependency on
i915_gem_active. In the meantime, external use of i915_gem_active is
quite beguiling, little do new users suspect that it implies a barrier
as each request it tracks must be ordered wrt the previous one. As one
of many, it can be used to track activity across multiple timelines, a
shared fence, which fits our unordered request submission much better. We
need to steer external users away from the singular, exclusive fence
imposed by i915_gem_active to i915_active instead. As part of that
process, we move i915_gem_active out of i915_request.c into
i915_active.c to start separating the two concepts, and rename it to
i915_active_request (both to tie it to the concept of tracking just one
request, and to give it a longer, less appealing name).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130005.2807-5-chris@chris-wilson.co.uk
|
|
Mixed C99 and kernel types use is getting ugly. Prefer kernel types.
sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'
Minor checkpatch fixes sprinkled on top of the changed lines.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14ed72e7f04c9340a057855c5950b54811f8a477.1547629303.git.jani.nikula@intel.com
|
|
Keep track of the temporary rpm wakerefs used for user access to the
device, so that we can cancel them upon release and clearly identify any
leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-10-chris@chris-wilson.co.uk
|
|
The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).
For regular builds, the compiler should be able to eliminate the unused
local variables and the program growth should be minimal. Fwiw, it came
out as a net improvement as gcc was able to refactor rpm_get and
rpm_get_if_in_use together,
v2: Just s/rpm_put/rpm_put_unchecked/ everywhere, leaving the manual
mark up for smaller more targeted patches.
v3: Mention the cookie in Returns
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-2-chris@chris-wilson.co.uk
|
|
Needs just a few additional includes here and there.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108082709.3748-1-jani.nikula@intel.com
|
|
Define IS_GEN() similarly to our IS_GEN_RANGE(). but use gen instead of
gen_mask to do the comparison. Now callers can pass then gen as a parameter,
so we don't require one macro for each gen.
The following spatch was used to convert the users of these macros:
@@
expression e;
@@
(
- IS_GEN2(e)
+ IS_GEN(e, 2)
|
- IS_GEN3(e)
+ IS_GEN(e, 3)
|
- IS_GEN4(e)
+ IS_GEN(e, 4)
|
- IS_GEN5(e)
+ IS_GEN(e, 5)
|
- IS_GEN6(e)
+ IS_GEN(e, 6)
|
- IS_GEN7(e)
+ IS_GEN(e, 7)
|
- IS_GEN8(e)
+ IS_GEN(e, 8)
|
- IS_GEN9(e)
+ IS_GEN(e, 9)
|
- IS_GEN10(e)
+ IS_GEN(e, 10)
|
- IS_GEN11(e)
+ IS_GEN(e, 11)
)
v2: use IS_GEN rather than GT_GEN and compare to info.gen rather than
using the bitmask
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212181044.15886-2-lucas.demarchi@intel.com
|
|
Coccinelle patch:
@@
identifier p;
@@
-INTEL_INFO(p)->gen
+INTEL_GEN(p)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208130606.15556-12-tvrtko.ursulin@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209215847.6660-1-chris@chris-wilson.co.uk
|
|
This is a precautionary measure as I have no evidence to suggest we've
hit a bug here (I was hoping this might explain gdg's odd behaviour, but
alas), but given that we have a function to flush the ggtt writes it
seems prudent to use it prior to changing the fence register. Due to the
intrinsic nature of the GTT often operating as an independent mmio path,
we should not just rely on the write to the fence acting as a full flush
for GTT writes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130164457.14037-1-chris@chris-wilson.co.uk
|
|
We don't wish to refault the entire object (other vma) when unbinding
one partial vma. To do this track which vma have been faulted into the
user's address space.
v2: Use a local vma_offset to tidy up a multiline unmap_mapping_range().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009084401.29090-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Following the pattern now used for obj->mm.pages, use just pin_fence and
unpin_fence to control access to the fence registers. I.e. instead of
calling get_fence(); pin_fence(), we now just need to call pin_fence().
This will make it easier to reduce the locking requirements around
fence registers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009084401.29090-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
In the past, vGPU alloc fence registers by walking through mm.fence_list
to find fence which pin_count = 0 and vma is empty. vGPU may not find
enough fence registers this way. Because a fence can be bind to vma even
though it is not in using. We have found such failure many times these
days.
An option to resolve this issue is that we can force-remove fence from
vma in this case.
This patch added two new api to the fence management code:
- i915_reserve_fence() will try to find a free fence from fence_list
and force-remove vma if need.
- i915_unreserve_fence() reclaim a reserved fence after vGPU has
finished.
With this change, the fence management is more clear to work with vGPU.
GVTg do not need remove fence from fence_list in private.
v3: (Chris)
- Add struct_mutex lock assertion.
- Only count for unpinned fence.
v2: (Chris)
- Rename the new api for symmetry.
- Add safeguard to ensure at least 1 fence remained for host display.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1504512061-5892-1-git-send-email-changbin.du@intel.com
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Unbind the vma may happen at any time, outside of the normal GT wakeref.
As such it relies on having a wakeref of its own. However, we can forgo
clearing the register whilst the device is asleep and just mark it as
unused - so that when we do wake up the device, we will clear the unused
fence register (see i915_gem_restore_fences).
[22423.944631] WARNING: CPU: 3 PID: 26178 at drivers/gpu/drm/i915/intel_drv.h:1739 i915_vma_put_fence+0xf3/0x100 [i915]
[22423.946053] RPM wakelock ref not held during HW access
[22423.946056] Modules linked in: vgem(E) i915(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) x86_pkg_temp_thermal(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) ghash_clmulni_intel(E) intel_gtt(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) evdev(E) aesni_intel(E) aes_x86_64(E) crypto_simd(E) cryptd(E) glue_helper(E) sysimgblt(E) fb_sys_fops(E) prime_numbers(E) drm(E) efivars(E) mei_me(E) lpc_ich(E) mei(E) mfd_core(E) battery(E) video(E) acpi_pad(E) button(E) tpm_tis(E) tpm_tis_core(E) tpm(E) autofs4(E) i2c_i801(E) thermal(E) fan(E) i2c_designware_platform(E) i2c_designware_core(E)
[22423.946438] CPU: 2 PID: 26178 Comm: gem_concurrent_ Tainted: G E 4.10.0+ #101
[22423.946513] Hardware name: ��������������������������������� ���������������������������������/���������������������������������, BIOS RYBDWi35.86A.0246.2
[22423.946600] Call Trace:
[22423.946641] dump_stack+0x68/0x9f
[22423.946703] __warn+0x107/0x130
[22423.946763] warn_slowpath_fmt+0xa8/0xe0
[22423.946825] ? __warn+0x130/0x130
[22423.946868] ? free_hot_cold_page_list+0x53/0x70
[22423.946942] ? mark_lock+0xcc/0x7f0
[22423.946997] ? __lock_is_held+0x84/0x100
[22423.947115] ? i915_vma_put_fence+0x64/0x100 [i915]
[22423.947224] i915_vma_put_fence+0xf3/0x100 [i915]
[22423.947335] i915_vma_unbind+0x4da/0x560 [i915]
[22423.947387] ? rb_erase+0x812/0x8a0
[22423.947439] ? kfree+0xa2/0xd0
[22423.947562] i915_vma_close+0x159/0x180 [i915]
[22423.947674] intel_ring_free+0x31/0x50 [i915]
[22423.947776] i915_gem_context_free+0x1ff/0x3d0 [i915]
[22423.947887] context_close+0x106/0x110 [i915]
[22423.947989] context_idr_cleanup+0xc/0x10 [i915]
[22423.948041] idr_for_each+0x14d/0x1d0
[22423.948158] ? context_close+0x110/0x110 [i915]
[22423.948206] ? get_from_free_list+0x70/0x70
[22423.948261] ? __lock_is_held+0x84/0x100
[22423.948325] ? __mutex_unlock_slowpath+0xd4/0x400
[22423.948448] i915_gem_context_close+0x4b/0x90 [i915]
[22423.948544] i915_driver_preclose+0x28/0x50 [i915]
[22423.948620] drm_release+0x175/0x690 [drm]
[22423.948681] ? fcntl_setlk+0x5e0/0x5e0
[22423.948746] __fput+0x17d/0x300
[22423.948807] ____fput+0x9/0x10
[22423.948859] task_work_run+0xa7/0xe0
[22423.948924] do_exit+0x4d2/0x13e0
[22423.948986] ? mm_update_next_owner+0x320/0x320
[22423.949051] ? __do_page_fault+0x209/0x5c0
[22423.949110] ? mark_held_locks+0x23/0xc0
[22423.949166] ? entry_SYSCALL_64_fastpath+0x5/0xb1
[22423.949232] do_group_exit+0x93/0x160
[22423.949289] SyS_exit_group+0x18/0x20
[22423.949350] entry_SYSCALL_64_fastpath+0x1c/0xb1
[22423.949403] RIP: 0033:0x7f9cc2e154c8
[22423.949484] RSP: 002b:00007ffd7e81b448 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[22423.949557] RAX: ffffffffffffffda RBX: ffffffff810ef1f0 RCX: 00007f9cc2e154c8
[22423.949617] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
[22423.949677] RBP: ffff880367e9ff98 R08: 00000000000000e7 R09: ffffffffffffff88
[22423.949741] R10: 00007f9cc1d5c000 R11: 0000000000000246 R12: 00007f9cc30f6c30
[22423.949798] R13: 0000000000000000 R14: 00007f9cc30f6c20 R15: 0000000000000003
[22423.949868] ? trace_hardirqs_off_caller+0xc0/0x110
v2: Move the rpm check down a layer so that we still perform the
vma/fence update required for the deferred mmio write on resume.
v3: Don't touch i915_gem_object_set_cache_level() and leave the rpm to
the low level routines (such as i915_vma_put_fence).
v4: vma may be null in fence_write, so extract drm_i915_private from
fence->i915
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170306092916.11623-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Start converting over from the byte count to its semantic macro, either
we want to allocate the size of a physical page in main memory or we
want the size of a virtual page in the GTT. 4096 could mean either, but
PAGE_SIZE and I915_GTT_PAGE_SIZE are explicit and should help improve
code comprehension and future changes. In the future, we may want to use
variable GTT page sizes and so have the challenge of knowing which
hardcoded values were used to represent a physical page vs the virtual
page.
v2: Look for a few more 4096s to convert, discover IS_ALIGNED().
v3: 4096ul paranoia, make fence alignment a distinct value of 4096, keep
bdw stolen w/a as 4096 until we know better.
v4: Add asserts that i915_vma_insert() start/end are aligned to GTT page
sizes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170110144734.26052-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Restricting the fence to the end of the previous tile-row breaks access
to the final portion of the object. On gen2/3 we employed lazy fencing
to pad out the fence with scratch page to provide access to the tail,
and now we also pad out the object on gen4+ we can apply the same fix.
Fixes: af1a7301c7cf ("drm/i915: Only fence tiled region of object.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-5-chris@chris-wilson.co.uk
|
|
The fence size/alignment is a combination of the vma size plus object
tiling parameters. Those parameters are rarely changed, making the fence
size/alignemnt roughly constant for the lifetime of the VMA. We can
simplify subsequent calculations by precalculating the size/alignment
required for GGTT vma taking fencing into account (with an update if we
do change the tiling or stride).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-4-chris@chris-wilson.co.uk
|
|
All of these conditions are prechecked by i915_tiling_ok() before we
allow setting the tiling/stride on the object and so we should never
fail asserting those conditions before writing the register.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-3-chris@chris-wilson.co.uk
|
|
Computing the tile row size of a tiled object (for use with fence
registers) is repeated, so extract it to a common helper.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170109161613.11881-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The fence registers are clobbered by a GPU reset. If there is concurrent
user access to a fenced region via a GTT mmaping, the access will not be
fenced during the reset (until we restore the fences afterwards). In order
to prevent invalid access during the reset, before we clobber the fences
first we must invalidate the GTT mmapings. Access to the mmap will then
be forced to fault in the page, and in handling the fault, i915_gem_fault()
will take the struct_mutex and wait upon the reset to complete.
v2: Fix up commentary.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99274
Testcase: igt/gem_mmap_gtt/hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104145110.1486-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Commit c9c4b6f6c283 ("drm/i915: fix swizzle detection for gen3") added a
complicated check for I915G/I945G. Pineview and other gen3 devices match
IS_MOBILE() anyway. Simplify.
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481627459-488-1-git-send-email-jani.nikula@intel.com
|
|
Pineview deserves to use its own platform enum (which was already added,
unused, previously). IS_G33() no longer matches Pineview, and gets
replaced by IS_G33() || IS_PINEVIEW() or equivalent. Pineview is no
longer an outlier among platform definitions.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481143689-19672-1-git-send-email-jani.nikula@intel.com
|
|
99% of the time we access i915_address_space->dev we want the i915
device and not the drm device, so let's store the drm_i915_private
backpointer instead. The only real complication here are the inlines
in i915_vma.h where drm_i915_private is not yet defined and so we have
to choose an alternate path for our asserts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129095008.32622-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Plus a small cascade of function prototype changes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
As a side product, had to split two other files;
- i915_gem_fence_reg.h
- i915_gem_object.h (only parts that needed immediate untanglement)
I tried to move code in as big chunks as possible, to make review
easier. i915_vma_compare was moved to a header temporarily.
v2:
- Use i915_gem_fence_reg.{c,h}
v3:
- Rebased
v4:
- Fix building when DEBUG_GEM is enabled by reordering a bit.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478861034-30643-1-git-send-email-joonas.lahtinen@linux.intel.com
|
