summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/gt
AgeCommit message (Collapse)Author
2019-06-19drm/i915: Stop passing I915_WAIT_LOCKED to i915_request_wait()Chris Wilson
Since commit eb8d0f5af4ec ("drm/i915: Remove GPU reset dependence on struct_mutex"), the I915_WAIT_LOCKED flags passed to i915_request_wait() has been defunct. Now go ahead and remove it from all callers. References: eb8d0f5af4ec ("drm/i915: Remove GPU reset dependence on struct_mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-3-chris@chris-wilson.co.uk
2019-06-19drm/i915/execlists: Detect cross-contamination with GuCChris Wilson
The process_csb routine from execlists_submission is incompatible with the GuC backend. Add a warning to detect if we accidentally end up in the wrong spot. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618110736.31155-1-chris@chris-wilson.co.uk
2019-06-19drm/i915: Make the semaphore saturation mask globalChris Wilson
The idea behind keeping the saturation mask local to a context backfired spectacularly. The premise with the local mask was that we would be more proactive in attempting to use semaphores after each time the context idled, and that all new contexts would attempt to use semaphores ignoring the current state of the system. This turns out to be horribly optimistic. If the system state is still oversaturated and the existing workloads have all stopped using semaphores, the new workloads would attempt to use semaphores and be deprioritised behind real work. The new contexts would not switch off using semaphores until their initial batch of low priority work had completed. Given sufficient backload load of equal user priority, this would completely starve the new work of any GPU time. To compensate, remove the local tracking in favour of keeping it as global state on the engine -- once the system is saturated and semaphores are disabled, everyone stops attempting to use semaphores until the system is idle again. One of the reason for preferring local context tracking was that it worked with virtual engines, so for switching to global state we could either do a complete check of all the virtual siblings or simply disable semaphores for those requests. This takes the simpler approach of disabling semaphores on virtual engines. The downside is that the decision that the engine is saturated is a local measure -- we are only checking whether or not this context was scheduled in a timely fashion, it may be legitimately delayed due to user priorities. We still have the same dilemma though, that we do not want to employ the semaphore poll unless it will be used. v2: Explain why we need to assume the worst wrt virtual engines. Fixes: ca6e56f654e7 ("drm/i915: Disable semaphore busywaits on saturated systems") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Cc: Dmitry Ermilov <dmitry.ermilov@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-8-chris@chris-wilson.co.uk
2019-06-18drm/i915: Don't dereference request if it may have been retired when printingChris Wilson
This has caught me out on countless occasions, when we retrieve a pointer from the submission/execlists backend, it does not carry a reference to the context or ring. Those are only pinned while the request is active, so if we see the request is already completed, it may be in the process of being retired and those pointers defunct. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110938 Fixes: 3a068721a973 ("drm/i915: Show ring->start for the ELSP context/request queue") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618161951.28820-2-chris@chris-wilson.co.uk
2019-06-18drm/i915: Update workarounds selftest for read only regsRobert M. Fosha
Updates the live_workarounds selftest to handle whitelisted registers that are flagged as read only. Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-5-John.C.Harrison@Intel.com
2019-06-18drm/i915: Add whitelist workarounds for ICLJohn Harrison
Updated whitelist table for ICL. v2: Reduce changes to just those required for media driver until the selftest can be updated to support the new features of the other entries. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-4-John.C.Harrison@Intel.com
2019-06-18drm/i915: Support whitelist workarounds on all enginesJohn Harrison
Newer hardware requires setting up whitelists on engines other than render. So, extend the whitelist code to support all engines. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-3-John.C.Harrison@Intel.com
2019-06-18drm/i915: Support flags in whitlist WAsJohn Harrison
Newer hardware adds flags to the whitelist work-around register. These allow per access direction privileges and ranges. Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Robert M. Fosha <robert.m.fosha@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618010108.27499-2-John.C.Harrison@Intel.com
2019-06-17drm/i915/gtt: Use a common type for page directoriesMika Kuoppala
All page directories are identical in function, only the position in the hierarchy differ. Use same base type for directory functionality. v2: cleanup, size always 512, init to null Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190614164350.30415-2-mika.kuoppala@linux.intel.com
2019-06-17drm/i915: move modesetting core code under display/Jani Nikula
Now that we have a new subdirectory for display code, continue by moving modesetting core code. display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this is, again, a surprisingly clean operation. v2: - don't move intel_sideband.[ch] (Ville) - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
2019-06-15drm/i915/ehl: Update MOCS table for EHLMatt Roper
EHL defines two new MOCS table entries but is otherwise compatible with the ICL MOCS table. These table entries (16 and 17) should still be considered unused for ICL and as such their behavior remains undefined for that platform. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190530234014.22340-1-matthew.d.roper@intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2019-06-14drm/i915: Replace engine->timeline with a plain listChris Wilson
To continue the onslaught of removing the assumption of a global execution ordering, another casualty is the engine->timeline. Without an actual timeline to track, it is overkill and we can replace it with a much less grand plain list. We still need a list of requests inflight, for the simple purpose of finding inflight requests (for retiring, resetting, preemption etc). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-3-chris@chris-wilson.co.uk
2019-06-14drm/i915: Keep contexts pinned until after the next kernel context switchChris Wilson
We need to keep the context image pinned in memory until after the GPU has finished writing into it. Since it continues to write as we signal the final breadcrumb, we need to keep it pinned until the request after it is complete. Currently we know the order in which requests execute on each engine, and so to remove that presumption we need to identify a request/context-switch we know must occur after our completion. Any request queued after the signal must imply a context switch, for simplicity we use a fresh request from the kernel context. The sequence of operations for keeping the context pinned until saved is: - On context activation, we preallocate a node for each physical engine the context may operate on. This is to avoid allocations during unpinning, which may be from inside FS_RECLAIM context (aka the shrinker) - On context deactivation on retirement of the last active request (which is before we know the context has been saved), we add the preallocated node onto a barrier list on each engine - On engine idling, we emit a switch to kernel context. When this switch completes, we know that all previous contexts must have been saved, and so on retiring this request we can finally unpin all the contexts that were marked as deactivated prior to the switch. We can enhance this in future by flushing all the idle contexts on a regular heartbeat pulse of a switch to kernel context, which will also be used to check for hung engines. v2: intel_context_active_acquire/_release Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614164606.15633-1-chris@chris-wilson.co.uk
2019-06-14drm/i915: make intel_wakeref work on the rpm structDaniele Ceraolo Spurio
intel_runtime_pm is the only thing they use from the i915 structure, so use that directly. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-9-daniele.ceraolospurio@intel.com
2019-06-14drm/i915: update with_intel_runtime_pm to use the rpm structureDaniele Ceraolo Spurio
Matching the underlying get/put functions. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-8-daniele.ceraolospurio@intel.com
2019-06-14drm/i915: update rpm_get/put to use the rpm structureDaniele Ceraolo Spurio
The functions where internally already only using the structure, so we need to just flip the interface. v2: rebase Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190613232156.34940-7-daniele.ceraolospurio@intel.com
2019-06-14drm/i915: Refine i915_reset.lock_mapChris Wilson
We already use a mutex to serialise i915_reset() and wedging, so all we need it to link that into i915_request_wait() and we have our lock cycle detection. v2.5: Take error mutex for selftests Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614071023.17929-3-chris@chris-wilson.co.uk
2019-06-14drm/i915: Discard some redundant cache domain flushesChris Wilson
Since commit a679f58d0510 ("drm/i915: Flush pages on acquisition"), we flush objects on acquire their pages and as such when we create an object for the purpose of writing into it, we do not need to manually flush. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614111053.25615-1-chris@chris-wilson.co.uk
2019-06-13drm/i915: Move fence register tracking from i915->mm to ggttChris Wilson
As the fence registers only apply to regions inside the GGTT is makes more sense that we track these as part of the i915_ggtt and not the general mm. In the next patch, we will then pull the register locking underneath the i915_ggtt.mutex. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613073254.24048-1-chris@chris-wilson.co.uk
2019-06-12drm/i915: Remove I915_READ16 and I915_WRITE16Tvrtko Ursulin
Remove call sites in favour of uncore mmio accessors and remove the old macros. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-6-tvrtko.ursulin@linux.intel.com
2019-06-12drm/i915: Remove POSTING_READ16Tvrtko Ursulin
Only a few call sites remain which have been converted to uncore mmio accessors and so the macro can be removed. ENGINE_POSTING_READ16 is added to replace one engine->mmio_base relative call site. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190611104548.30545-3-tvrtko.ursulin@linux.intel.com
2019-06-12drm/i915: Prevent lock-cycles between GPU waits and GPU resetsChris Wilson
We cannot allow ourselves to wait on the GPU while holding any lock as we may need to reset the GPU. While there is not an explicit lock between the two operations, lockdep cannot detect the dependency. So let's tell lockdep about the wait/reset dependency with an explicit lockmap. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190612085246.16374-1-chris@chris-wilson.co.uk
2019-06-11drm/i915: Rename i915_hw_ppgtt to i915_ppgttChris Wilson
Keeping the _hw_ in there does not help to distinguish it from its only brethren i915_ggtt, so drop it. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-2-chris@chris-wilson.co.uk
2019-06-11drm/i915: Pull kref into i915_address_spaceChris Wilson
Make the kref common to both derived structs (i915_ggtt and i915_ppgtt) so that we can safely reference count an abstract ctx->vm address space. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190611091238.15808-1-chris@chris-wilson.co.uk
2019-06-10drm/i915: Allow interrupts when taking the timeline->mutexChris Wilson
Before we commit ourselves to writing commands into the ringbuffer and submitting the request, allow signals to interrupt acquisition of the timeline mutex. We allow ourselves to be interrupted at any time later if we need to block for space in the ring, anyway. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190610103610.19883-1-chris@chris-wilson.co.uk
2019-06-10drm/i915: Make read_subslice_reg take engineTvrtko Ursulin
The function operates on the render engine so make the input reflect it. v2: * Pass engine to read_subslice_reg. (Chris) * Drop inline from read_subslice_reg. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190610125706.26110-1-tvrtko.ursulin@linux.intel.com
2019-06-10drm/i915: Move i915_check_and_clear_faults to intel_reset.cTvrtko Ursulin
The code is logically about reset so it makes sense. It also enables making i915_clear_error_registers static. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190607115932.20271-1-tvrtko.ursulin@linux.intel.com
2019-06-07drm/i915: Tidy intel_execlists_submission_initTvrtko Ursulin
Get to uncore from the engine for better logic organization and use already available i915 everywhere. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190607084521.16845-2-tvrtko.ursulin@linux.intel.com
2019-06-07drm/i915: Convert some more bits to use engine mmio accessorsTvrtko Ursulin
Remove a couple dev_priv locals as a consequence. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190607084521.16845-1-tvrtko.ursulin@linux.intel.com
2019-06-07drm/i915: Extract engine fault reset to a helperTvrtko Ursulin
Just tidying the flow a bit. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-4-tvrtko.ursulin@linux.intel.com
2019-06-07drm/i915: Make Gen6/7 RING_FAULT_REG access engine centricTvrtko Ursulin
Similar to earlier conversions, eliminate the implicit dev_priv by introducing some helpers which take the engine parameter (since the register itself is per engine). v2: * Always use parentheses in macro arguments. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190607101535.767-1-tvrtko.ursulin@linux.intel.com
2019-06-07drm/i915: Tidy engine mask types in hangcheckTvrtko Ursulin
We can use intel_engine_mask_t to align with the rest of the codebase. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-2-tvrtko.ursulin@linux.intel.com
2019-06-07drm/i915: Reset only affected engines when handling error captureTvrtko Ursulin
Pass down the engine mask to i915_clear_error_registers so only affected engines can be reset on the Gen6/7 path. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-1-tvrtko.ursulin@linux.intel.com
2019-05-30drm/i915: add in-kernel blitter clientMatthew Auld
The plan is to use the blitter engine for async object clearing when using local memory, but before we can move the worker to get_pages() we have to first tame some more of our struct_mutex usage. With this in mind we should be able to upstream the object clearing as some selftests, which should serve as a guinea pig for the ongoing locking rework and upcoming async get_pages() framework. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: CQ Tang <cq.tang@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190529123108.24422-2-matthew.auld@intel.com
2019-05-29Revert "drm/i915: Expand subslice mask"Jani Nikula
This reverts commit 1ac159e23c2c ("drm/i915: Expand subslice mask"), which kills ICL due to GEM_BUG_ON() sanity checks before CI even gets a chance to do anything. The commit exposes an issue in commit 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads"), which will also need to be addressed. There's a proposed fix [1], but considering the seeming uncertainty with the fix as well as the size of the regressing commit (in this context, the one that actually brings down ICL), this warrants a revert to get ICL working, and gives us time to get all of this right without rushing. Even if this means shooting the messenger. <3>[ 9.426327] intel_sseu_get_subslices:46 GEM_BUG_ON(slice >= sseu->max_slices) <4>[ 9.426355] ------------[ cut here ]------------ <2>[ 9.426357] kernel BUG at drivers/gpu/drm/i915/gt/intel_sseu.c:46! <4>[ 9.426371] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 9.426377] CPU: 1 PID: 364 Comm: systemd-udevd Not tainted 5.2.0-rc2-CI-CI_DRM_6159+ #1 <4>[ 9.426385] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019 <4>[ 9.426444] RIP: 0010:intel_sseu_get_subslices+0x8a/0xe0 [i915] <4>[ 9.426452] Code: d5 76 b7 e0 48 8b 35 9d 24 21 00 49 c7 c0 07 f0 72 a0 b9 2e 00 00 00 48 c7 c2 00 8e 6d a0 48 c7 c7 a5 14 5b a0 e8 36 3c be e0 <0f> 0b 48 c7 c1 80 d5 6f a0 ba 30 00 00 00 48 c7 c6 00 8e 6d a0 48 <4>[ 9.426468] RSP: 0018:ffffc9000037b9c8 EFLAGS: 00010282 <4>[ 9.426475] RAX: 000000000000000f RBX: 0000000000000000 RCX: 0000000000000000 <4>[ 9.426482] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88849e346f98 <4>[ 9.426490] RBP: ffff88848a200000 R08: 0000000000000004 R09: ffff88849d50b000 <4>[ 9.426497] R10: 0000000000000000 R11: ffff88849e346f98 R12: ffff88848a209e78 <4>[ 9.426505] R13: 0000000003000000 R14: ffff88848a20b1a8 R15: 0000000000000000 <4>[ 9.426513] FS: 00007f73d5ae8680(0000) GS:ffff88849fc80000(0000) knlGS:0000000000000000 <4>[ 9.426521] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 9.426527] CR2: 0000561417b01260 CR3: 0000000494764003 CR4: 0000000000760ee0 <4>[ 9.426535] PKRU: 55555554 <4>[ 9.426538] Call Trace: <4>[ 9.426585] wa_init_mcr+0xd5/0x110 [i915] <4>[ 9.426597] ? lock_acquire+0xa6/0x1c0 <4>[ 9.426645] icl_gt_workarounds_init+0x21/0x1a0 [i915] <4>[ 9.426694] ? i915_driver_load+0xfcf/0x18a0 [i915] <4>[ 9.426739] gt_init_workarounds+0x14c/0x230 [i915] <4>[ 9.426748] ? _raw_spin_unlock_irq+0x24/0x50 <4>[ 9.426789] intel_gt_init_workarounds+0x1b/0x30 [i915] <4>[ 9.426835] i915_driver_load+0xfd7/0x18a0 [i915] <4>[ 9.426843] ? lock_acquire+0xa6/0x1c0 <4>[ 9.426850] ? __pm_runtime_resume+0x4f/0x80 <4>[ 9.426857] ? _raw_spin_unlock_irqrestore+0x4c/0x60 <4>[ 9.426863] ? _raw_spin_unlock_irqrestore+0x4c/0x60 <4>[ 9.426870] ? lockdep_hardirqs_on+0xe3/0x1b0 <4>[ 9.426915] i915_pci_probe+0x29/0xa0 [i915] <4>[ 9.426923] pci_device_probe+0x9e/0x120 <4>[ 9.426930] really_probe+0xea/0x3c0 <4>[ 9.426936] driver_probe_device+0x10b/0x120 <4>[ 9.426942] device_driver_attach+0x4a/0x50 <4>[ 9.426948] __driver_attach+0x97/0x130 <4>[ 9.426954] ? device_driver_attach+0x50/0x50 <4>[ 9.426960] bus_for_each_dev+0x74/0xc0 <4>[ 9.426966] bus_add_driver+0x13f/0x210 <4>[ 9.426971] ? 0xffffffffa083b000 <4>[ 9.426976] driver_register+0x56/0xe0 <4>[ 9.426982] ? 0xffffffffa083b000 <4>[ 9.426987] do_one_initcall+0x58/0x300 <4>[ 9.426994] ? do_init_module+0x1d/0x1f6 <4>[ 9.427001] ? rcu_read_lock_sched_held+0x6f/0x80 <4>[ 9.427007] ? kmem_cache_alloc_trace+0x261/0x290 <4>[ 9.427014] do_init_module+0x56/0x1f6 <4>[ 9.427020] load_module+0x24d1/0x2990 <4>[ 9.427032] ? __se_sys_finit_module+0xd3/0xf0 <4>[ 9.427037] __se_sys_finit_module+0xd3/0xf0 <4>[ 9.427047] do_syscall_64+0x55/0x1c0 <4>[ 9.427053] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 9.427059] RIP: 0033:0x7f73d5609839 <4>[ 9.427064] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 <4>[ 9.427082] RSP: 002b:00007ffdf34477b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4>[ 9.427091] RAX: ffffffffffffffda RBX: 00005559fd5d7b40 RCX: 00007f73d5609839 <4>[ 9.427099] RDX: 0000000000000000 RSI: 00007f73d52e8145 RDI: 000000000000000f <4>[ 9.427106] RBP: 00007f73d52e8145 R08: 0000000000000000 R09: 00007ffdf34478d0 <4>[ 9.427114] R10: 000000000000000f R11: 0000000000000246 R12: 0000000000000000 <4>[ 9.427121] R13: 00005559fd5c90f0 R14: 0000000000020000 R15: 00005559fd5d7b40 <4>[ 9.427131] Modules linked in: i915(+) mei_hdcp x86_pkg_temp_thermal coretemp snd_hda_intel crct10dif_pclmul crc32_pclmul snd_hda_codec snd_hwdep e1000e snd_hda_core ghash_clmulni_intel ptp snd_pcm cdc_ether usbnet mii pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc <4>[ 9.427254] ---[ end trace af3eeb543bd66e66 ]--- [1] http://patchwork.freedesktop.org/patch/msgid/20190528200655.11605-1-chris@chris-wilson.co.uk References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6159/fi-icl-u2/pstore0-1517155098_Oops_1.log References: 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads") Fixes: 1ac159e23c2c ("drm/i915: Expand subslice mask") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Yunwei Zhang <yunwei.zhang@intel.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190529082150.31526-1-jani.nikula@intel.com
2019-05-29drm/i915: selftest_lrc: Check the correct variableDan Carpenter
We should check "request[n]" instead of just "request". Fixes: 78e41ddd2198 ("drm/i915: Apply an execution_mask to the virtual_engine") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190529110355.GA19119@mwanda
2019-05-28drm/i915: Expand subslice maskStuart Summers
Currently, the subslice_mask runtime parameter is stored as an array of subslices per slice. Expand the subslice mask array to better match what is presented to userspace through the I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is then calculated: slice * subslice stride + subslice index / 8 v2: fix spacing in set_sseu_info args use set_sseu_info to initialize sseu data when building device status in debugfs rename variables in intel_engine_types.h to avoid checkpatch warnings v3: update headers in intel_sseu.h v4: add const to some sseu_dev_info variables use sseu->eu_stride for EU stride calculations v5: address review comments from Tvrtko and Daniele v6: remove extra space in intel_sseu_get_subslices return the correct subslice enable in for_each_instdone add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size use printk formatted string for subslice mask v7: remove string.h header and rebase Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-6-stuart.summers@intel.com
2019-05-28drm/i915: Refactor sseu helper functionsStuart Summers
Move functions to intel_sseu.h and remove inline qualifier. Additionally, ensure these are all prefixed with intel_sseu_* to match the convention of other functions in i915. v2: fix spacing from checkpatch warning v3: squash helper function changes into a single patch break 80 character line to fix checkpatch warning move get/set_eus helpers to intel_device_info.c v4: Remove intel_ prefix from static functions in intel_device_info.c and correctly copy changes to stride calculation in those functions. Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-5-stuart.summers@intel.com
2019-05-28drm/i915: Move calculation of subslices per slice to new functionStuart Summers
Add a new function to return the number of subslices per slice to consolidate code usage. v2: rebase on changes to move sseu struct to intel_sseu.h v3: add intel_* prefix to sseu_subslices_per_slice Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-4-stuart.summers@intel.com
2019-05-28drm/i915: Add macro for SSEU stride calculationStuart Summers
Subslice stride and EU stride are calculated multiple times in i915_query. Move this calculation to a macro to reduce code duplication. v2: update headers in intel_sseu.h v3: use GEN_SSEU_STRIDE for stride calculations in intel_sseu.h apply s/bits/max_entries/ to GEN_SSEU_STRIDE parameter Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-3-stuart.summers@intel.com
2019-05-28drm/i915: Drop the deferred active referenceChris Wilson
An old optimisation to reduce the number of atomics per batch sadly relies on struct_mutex for coordination. In order to remove struct_mutex from serialising object/context closing, always taking and releasing an active reference on first use / last use greatly simplifies the locking. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-15-chris@chris-wilson.co.uk
2019-05-28drm/i915: Rename intel_context.active to .inflightChris Wilson
Rename the engine this HW context is currently active upon (that we are flying upon) to disambiguate between the mixture of different active terms (and prevent conflict in future patches). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-14-chris@chris-wilson.co.uk
2019-05-28drm/i915: Move GEM object domain management from struct_mutex to localChris Wilson
Use the per-object local lock to control the cache domain of the individual GEM objects, not struct_mutex. This is a huge leap forward for us in terms of object-level synchronisation; execbuffers are coordinated using the ww_mutex and pread/pwrite is finally fully serialised again. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-10-chris@chris-wilson.co.uk
2019-05-28drm/i915: Move more GEM objects under gem/Chris Wilson
Continuing the theme of separating out the GEM clutter. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-8-chris@chris-wilson.co.uk
2019-05-28drm/i915: Move shmem object setup to its own fileChris Wilson
Split the plain old shmem object into its own file to start decluttering i915_gem.c v2: Lose the confusing, hysterical raisins, suffix of _gtt. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-4-chris@chris-wilson.co.uk
2019-05-28drm/i915: Split GEM object type definition to its own headerChris Wilson
For convenience in avoiding inline spaghetti, keep the type definition as a separate header. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190528092956.14910-1-chris@chris-wilson.co.uk
2019-05-28drm/i915/guc: Updates for GuC 32.0.3 firmwareMichal Wajdeczko
New GuC 32.0.3 firmware made many changes around its ABI that require driver updates: * FW release version numbering schema now includes patch number * FW release version encoding in CSS header * Boot parameters * Suspend/resume protocol * Sample-forcewake command * Additional Data Structures (ADS) This commit is a squash of patches 3-8 from series [1]. [1] https://patchwork.freedesktop.org/series/58760/ Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Jeff Mcgee <jeff.mcgee@intel.com> Cc: John Spotswood <john.a.spotswood@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tomasz Lis <tomasz.lis@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # numbering schema Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ccs heaser Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # boot params Acked-by: John Spotswood <john.a.spotswood@intel.com> # suspend/resume Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # sample-forcewake Acked-by: John Spotswood <john.a.spotswood@intel.com> # sample-forcewake Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> # ADS Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190527183613.17076-4-michal.wajdeczko@intel.com
2019-05-24drm/i915/gen11: enable support for headerless msgsDongwon Kim
Setting bit5 (headerless msg for preemptible GPGPU context) of SAMPLER_MODE register to enable support for the headless msgs on gen11. None of existing use cases will be affected by this as this change makes both types of message - headerless and w/ header supported at the same time. It also complies with the new recommendation for the default bit value for the next gen. v2: rewrote commit message to include more information v3: setting the bit in icl_ctx_workarounds_init() Signed-off-by: Dongwon Kim <dongwon.kim@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190425055005.21790-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2019-05-23drm/i915/selftests: Use prepare/finish during atomic reset testMichal Wajdeczko
We were testing full GPU reset in atomic context without correctly wrapping it by prepare/finish steps. This could confuse our GuC reset handling code. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-4-michal.wajdeczko@intel.com
2019-05-23drm/i915/selftests: Split igt_atomic_reset testcaseMichal Wajdeczko
Split igt_atomic_reset selftests into separate full & engines parts, so we can move former to the dedicated reset selftests file. While here change engines test to loop first over atomic phases and then loop over available engines. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190522193203.23932-3-michal.wajdeczko@intel.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 09:32:54 +0000