summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/gma500/oaktrail_crtc.c
AgeCommit message (Collapse)Author
2018-05-18drm/gma500: Move GEM BO to drm_framebufferDaniel Stone
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle and destroy functions the same as the GEM framebuffer helper, we can reuse those. Signed-off-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-20-daniels@collabora.com
2016-12-15drm: Nuke fb->bits_per_pixelVille Syrjälä
Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Nuke fb->depthVille Syrjälä
Replace uses of fb->depth with fb->format->depth. Less duplicate information is a good thing. @@ struct drm_framebuffer *fb; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - fb->depth = E; ... } @@ struct nouveau_framebuffer *fb; @@ - fb->base.depth + fb->base.format->depth @@ struct drm_framebuffer fb; @@ - fb.depth + fb.format->depth @@ struct drm_framebuffer *fb; @@ - fb->depth + fb->format->depth @@ struct drm_framebuffer fb; @@ - (fb.format->depth) + fb.format->depth @@ struct drm_framebuffer *fb; @@ - (fb->format->depth) + fb->format->depth @@ @@ struct drm_framebuffer { ... - unsigned int depth; ... }; v2: Drop the vmw stuff (Daniel) Rerun spatch due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481751095-18249-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-14drm/gma500: Add some local 'fb' variablesVille Syrjälä
Add a local 'fb' variable to a few places to get rid of the 'crtc->primary->fb' stuff. Looks neater and helps me with my poor coccinelle skills later. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-7-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-03-04drm/gma: removed optional dummy crtc mode_fixup function.Carlos Palminha
This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: Carlos Palminha <palminha@synopsys.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-07drm/gma500: constify all struct drm_*_helper funcs pointersJani Nikula
They are not to be modified. Generated using the semantic patch: @@ @@ ( const struct drm_crtc_helper_funcs * | - struct drm_crtc_helper_funcs * + const struct drm_crtc_helper_funcs * ) @@ @@ ( const struct drm_encoder_helper_funcs * | - struct drm_encoder_helper_funcs * + const struct drm_encoder_helper_funcs * ) @@ @@ ( const struct drm_connector_helper_funcs * | - struct drm_connector_helper_funcs * + const struct drm_connector_helper_funcs * ) @@ @@ ( const struct drm_plane_helper_funcs * | - struct drm_plane_helper_funcs * + const struct drm_plane_helper_funcs * ) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-01drm: Replace crtc fb with primary plane fb (v3)Matt Roper
Now that CRTC's have a primary plane, there's no need to track the framebuffer in the CRTC. Replace all references to the CRTC fb with the primary plane's fb. This patch was generated by the Coccinelle semantic patching tool using the following rules: @@ struct drm_crtc C; @@ - (C).fb + C.primary->fb @@ struct drm_crtc *C; @@ - (C)->fb + C->primary->fb v3: Generate patch via coccinelle. Actual removal of crtc->fb has been moved to a subsequent patch. v2: Fixup several lingering crtc->fb instances that were missed in the first patch iteration. [Rob Clark] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2013-11-08drm/gma500/mrst: Replace WMs and chickenbits with values from EMGDPatrik Jakobsson
For the minnowboard to work the values found in EMGD are required. This might break Oaktrail but without hardware to test with I cannot really tell (and do not really care). Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-11-08drm/gma500/mrst: Properly route oaktrail hdmi hooksPatrik Jakobsson
Since we can have SDVO on Pipe B we better check the output type instead of pipe number for Oaktrail HDMI. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-11-08drm/gma500/mrst: Add aux register writes when programming pipePatrik Jakobsson
On SDVO pipes (always Pipe B on mrst) we have to sequentially write the aux vdc. We might be able to skip programming the primary vdc in some/most places but we don't care about that now. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-11-08drm/gma500/mrst: Add SDVO clock calculationPatrik Jakobsson
We start off by adding SDVO limits and converting all limits to the generic gma_limit_t stuct. Then we separate clock calculations for LVDS and SDVO. This will be cleaned up later but keep it simple for now. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Rename psb_intel_encoder to gma_encoderPatrik Jakobsson
The psb_intel_encoder is generic and should be named appropriately Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Rename psb_intel_crtc to gma_crtcPatrik Jakobsson
The psb_intel_crtc is generic and should be named appropriately Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Convert to generic encoder funcsPatrik Jakobsson
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500/oak: Use identical generic crtc funcsPatrik Jakobsson
Use the generic gma functions instead of the oaktrail functions where they are identical. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Convert to generic gamma funcsPatrik Jakobsson
This takes care of the remaining chips using the old generic code. We don't check if the pipe number is valid but the old code peeked in the register map before checking anyways so just ignore it. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Make all chips use gma_wait_for_vblankPatrik Jakobsson
Also remove the duplicated oaktrail function. Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-07-24drm/gma500: Make use of gma_pipe_has_type()Patrik Jakobsson
Replace any use of xxx_intel_pipe_has_type() with the generic gma_pipe_has_type() function. Poulsbo still use it but that will be removed when we rip out psb_intel_pipe_has_type(). Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2012-11-30drm/gma500: drm_connector_property -> drm_object_propertyRob Clark
Signed-off-by: Rob Clark <rob@ti.com>
2012-11-07gma600: Enable HDMI supportAlan Cox
There are still some mysteries left, in particular how (and in fact if) the EDID is supposed to work on the HDMI port. However the basic stuff now works and I can plug my Q550 into an HDMI display and get the expected results. [v2: cleans up space/tab and other formatting as per Dave's request] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-07-19drm: Make the .mode_fixup() operations mode argument a const pointerLaurent Pinchart
The passed mode must not be modified by the operation, make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-05-11gma500: use the register map to clean upAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: oaktrail_crtc: drop unused variablesKirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: oaktrail_crtc: mark few functions as staticKirill A. Shutemov
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-10gma500: clean up some of the struct fields we no longer useAlan Cox
Some this is Medfield stuff that may reappear in some form later, other bits are just dead stuff Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20gma500: Convert Oaktrail to work with new output handlingPatrik Jakobsson
Replace psb_intel_output with psb_intel_encoder and psb_intel_connector Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> [Changed Moorestown reference to Oaktrail] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20drm: Replace pitch with pitches[] in drm_framebufferVille Syrjälä
Otherwise each driver would need to keep the information inside their own framebuffer object structure. Also add offsets[]. BOs on the other hand are driver specific, so those can be kept in driver specific structures. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-06gma500: do a pass over the FIXME tagsAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-16gma500: Add Oaktrail supportAlan Cox
Oaktrail (GMA600) is found on some tablet/slate PC type systems. It's a bit different to the GMA500 but similar enough it makes sense to plug it into the same driver. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 15:29:49 +0000