summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_edid.c
AgeCommit message (Collapse)Author
2013-11-11drm/edid: compare actual vrefresh for all modes for quirksAlex Deucher
The vrefresh field of the mode is 0 for most modes fetched from the EDID (e.g., established timings). When dealing with monitors that have a bogus preferred mode, we may not always select the mode we want because we compare the target refresh to the mode's vrefresh which is 0 in a lot of cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2013-11-06drm: add drm_set_preferred_modeGerd Hoffmann
New helper function to set the preferred video mode. Can be called after drm_add_modes_noedid if you don't want the largest supported video mode be used by default. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06drm/edid: Yank a helpful comment about EST modes from xf86EdidModes.cVille Syrjälä
I got very confused when I tried to compare the EST modes with the spec. Bring over a comment from xf86EdidModes.c that actually describes some of history where these things came from. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06drm/edid: Don't skip every eighth EST III modeVille Syrjälä
Also check the est3 modes whose presence is indicated by bit 0. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-11-06drm/edid: Fix the 1792x1344-75 EST III modeVille Syrjälä
The correct refresh rate for this mode is 75, not 85. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-16drm: add support for additional stereo 3D modesThomas Wood
Parse the 3D_Structure_ALL and 3D_MASK fields of the HDMI Vendor Specific Data Block to expose more stereo 3D modes. v2: Use (1 << 0) for consistency. (Ville Syrjälä) Skip adding any modes if 3D_MASK is indicated as being present but the length only includes 3D_Structure_ALL. (Ville Syrjälä) Check that the value of HDMI_3D_LEN is large enough to include 3D_Structure_ALL and 3D_MASK, if they are present. (Ville Syrjälä) v3: Increment offset before the length checks. (Ville Syrjälä) Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-10Merge remote-tracking branch 'airlied/drm-next' into drm-intel-nextDaniel Vetter
The conflict in intel_drv.h tripped me up a bit since a patch in dinq moves all the functions around, but another one in drm-next removes a single function. So I'ev figured backing this into a backmerge would be good. i915_dma.c is just adjacent lines changed, nothing nefarious there. Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/intel_drv.h Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Code stereo layouts as an enum rather than a bit fieldDamien Lespiau
This allows us to use fewer bits in the mode structure, leaving room for future work while allowing more stereo layouts types than we could have ever dreamt of. I also exposed the previously private DRM_MODE_FLAG_3D_MASK to set in stone that we are using 5 bits for the stereo layout enum, reserving 32 values. Even with that reservation, we gain 3 bits from the previous encoding. The code adding the mandatory stereo modes needeed to be adapted as it was relying or being able to or stereo layouts together. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Carry over the stereo flags when adding the alternate modeDamien Lespiau
This allows to expose the alternate clock versions of the stereo modes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Make drm_match_cea_mode() return the underlying 2D VIC for 3d modesDamien Lespiau
When scanning out a stereo mode, the AVI infoframe vic field has to be the underlyng 2D VIC. Before that commit, we weren't matching the CEA mode because of the extra stereo flag and then were setting the VIC field in the AVI infoframe to 0. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Set the relevant infoframe field when scanning out a 3D modeDamien Lespiau
When scanning out a 3D mode on HDMI, we need to send an HDMI infoframe with the corresponding layout to the sink. v2: Make s3d_structure_from_display_mode() less subtle (Ville Syrjälä) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm: Extract add_hdmi_mode() out of do_hdmi_vsdb_modes()Damien Lespiau
So we respect a nice design of having similar functions at the same level, in this case: do_hdmi_vsdb_modes() - add_hdmi_mandatory_stereo_modes() - add_hdmi_mode() Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/edid: Expose mandatory stereo modes for HDMI sinksDamien Lespiau
For now, let's just look at the 3D_present flag of the CEA HDMI vendor block to detect if the sink supports a small list of then mandatory 3D formats. See the HDMI 1.4a 3D extraction for detail: http://www.hdmi.org/manufacturer/specification.aspx v2: Rename freq to vrefresh, make the mandatory structure a bit more compact, fix some white space issues and add a couple of const (Ville Syrjälä) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-01drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocationAlex Deucher
Return -ENOMEM if the allocation fails. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-01drm/edid: add drm_edid_duplicateJani Nikula
We have some code duplication related to EDID duplication. Add a helper. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-30drm/edid: add a helper function to extract the speaker allocation data block ↵Alex Deucher
(v3) This adds a helper function to extract the speaker allocation data block from the EDID. This data block describes what speakers are present on the display device. v2: update per Ville Syrjälä's comments v3: fix copy/paste typo in memory allocation Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Rafał Miłecki <zajec5@gmail.com>
2013-08-30drm/edid: add quirk for Medion MD30217PGAlex Deucher
This LCD monitor (1280x1024 native) has a completely bogus detailed timing (640x350@70hz). User reports that 1280x1024@60 has waves so prefer 1280x1024@75. Manufacturer: MED Model: 7b8 Serial#: 99188 Year: 2005 Week: 5 EDID Version: 1.3 Analog Display Input, Input Voltage Level: 0.700/0.700 V Sync: Separate Max Image Size [cm]: horiz.: 34 vert.: 27 Gamma: 2.50 DPMS capabilities: Off; RGB/Color Display First detailed timing is preferred mode redX: 0.645 redY: 0.348 greenX: 0.280 greenY: 0.605 blueX: 0.142 blueY: 0.071 whiteX: 0.313 whiteY: 0.329 Supported established timings: 720x400@70Hz 640x480@60Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1280x1024@75Hz Manufacturer's mask: 0 Supported standard timings: Supported detailed timing: clock: 25.2 MHz Image Size: 337 x 270 mm h_active: 640 h_sync: 688 h_sync_end 784 h_blank_end 800 h_border: 0 v_active: 350 v_sync: 350 v_sync_end 352 v_blanking: 449 v_border: 0 Monitor name: MD30217PG Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz Serial No: 501099188 EDID (in hex): 00ffffffffffff0034a4b80774830100 050f010368221b962a0c55a559479b24 125054afcf00310a0101010101018180 000000000000d60980a0205e63103060 0200510e1100001e000000fc004d4433 3032313750470a202020000000fd0038 4c1e530e000a202020202020000000ff 003530313039393138380a2020200078 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: friedrich@mailstation.de Cc: stable@vger.kernel.org
2013-08-30video/hdmi: Rename HDMI_IDENTIFIER to HDMI_IEEE_OUILespiau, Damien
HDMI_IDENTIFIER was felt too generic, rename it to what it is, the IEEE OUI corresponding to HDMI Licensing, LLC. http://standards.ieee.org/develop/regauth/oui/oui.txt Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Add a helper to forge HDMI vendor infoframesLespiau, Damien
This can then be used by DRM drivers to setup their vendor infoframes. v2: Fix hmdi typo (Simon Farnsworth) v3: Adapt to the hdmi_vendor_infoframe rename Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/edid: Move HDMI_IDENTIFIER to hdmi.hLespiau, Damien
We'll need the HDMI OUI for the HDMI vendor infoframe data, so let's move the DRM one to hdmi.h, might as well use the hdmi header to store some hdmi defines. (Note that, in fact, infoframes are part of the CEA-861 standard, and only the HDMI vendor specific infoframe is special to HDMI, but details..) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30video/hdmi: Don't let the user of this API create invalid infoframesLespiau, Damien
To set the active aspect ratio value in the AVI infoframe today, you not only have to set the active_aspect field, but also the active_info_valid bit. Out of the 1 user of this API, we had 100% misuse, forgetting the _valid bit. This was fixed in: Author: Damien Lespiau <damien.lespiau@intel.com> Date: Tue Aug 6 20:32:17 2013 +0100 drm: Don't generate invalid AVI infoframes for CEA modes We can do better and derive the _valid bit from the user wanting to set the active aspect ratio. v2: Fix multi-lines comment style (Thierry Reding) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Add support for alternate clocks of 4k modesLespiau, Damien
v2: Fix hmdi typo (Simon Farnsworth, Ville Syrjälä) Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/edid: Parse the HDMI CEA block and look for 4k modesLespiau, Damien
HDMI 1.4 adds 4 "4k x 2k" modes in the the CEA vendor specific block. With this commit, we now parse this block and expose the 4k modes that we find there. v2: Fix the "4096x2160" string (nice catch!), add comments about do_hdmi_vsdb_modes() arguments and make it clearer that offset is relative to the end of the required fields of the HDMI VSDB (Ville Syrjälä) v3: Fix 'Unknow' typo (Simon Farnsworth) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Tested-by: Cancan Feng <cancan.feng@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67030 Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm/edid: Fix add_cea_modes() style issuesLespiau, Damien
A few styles issues have crept in here, fix them before touching this code again. v2: constify arguments that can be (Ville Syrjälä) v3: constify, but better (Ville Syrjälä) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-30drm: Don't export drm_find_cea_extension() any moreLespiau, Damien
This function is only used inside drm_edid.c. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-08drm: Set aspect ratio fields in the AVI infoframe even for non CEA modesDamien Lespiau
I cannot find any evidence what we shouldn't try to set those fields when setting a non-CEA mode on an HDMI sink. So just kill that return. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-08drm: Handle the DBLCLK flag in the common infoframe helperDamien Lespiau
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-08drm: Don't generate invalid AVI infoframes for CEA modesDamien Lespiau
From CEA-861: Data Byte 1, bit A0 indicates whether Active Format Data is present in Data Byte 2 bits R3 through R0. A source device shall set A0=1 when any of the AFD bits are set. ie. if we want to set active_aspect, we need to set the active_info_valid bit to 1 as well. Cc: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-04drm: add assertion for checking null edid to drm_edid_block_validSeung-Woo Kim
If raw_edid of drm_edid_block_vaild() is null, it will crash, so checking in bad label is removed and instead assertion is added at the top of the function. The type of return for the function is bool, so it fixes to return true and false instead of 1 and 0. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-27drm/edid: Don't print messages regarding stereo or csync by defaultEgbert Eich
drm_mode_detailed() is called quite often, therefore when a monitor that has a detailed timing mode marked DRM_EDID_PT_STEREO or requiring composite sync, warning messages will clutter up the kernel log. Like we already do for incorrect hsync/vsync pluse widths, print these messages only when KMS debugging is enabled. Signed-off-by: Egbert Eich <eich@suse.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-11drm/edid: Add both 60Hz and 59.94Hz CEA modes to connector's mode listVille Syrjälä
Having both modes can be beneficial for video playback cases. If you can match the video framerate exactly, and the audio and video clocks come from the same source, you should be able to avoid dropped/repeated frames without expensive operations such as resampling the audio to match video output rate. Rather than add both variants based on the CEA extension short video descriptors in do_cea_modes(), add only one variant there. Once all the EDID has been fully probed, do a loop over the entire probed mode list, during which we add the other variants for all modes that match CEA modes. This allows us to match modes that didn't come via the CEA short video descriptors. For example one Samsung TV here doesn't have the 640x480-60 mode as a SVD, but instead it's specified via a detailed timing descriptor. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-26drm/edid: Check both 60Hz and 59.94Hz when looking for a CEA modeVille Syrjälä
drm_match_cea_mode() should be able to match both the 60Hz version, and the 59.94Hz version of modes. We only store one pixel clock value per mode in edid_cea_modes, so the other value must be calculated. Depending on the mode, edid_cea_modes contains the pixel clock for either the 60Hz version or the 59.94Hz version, so a bit of care is needed so that the calculation produces the correct result. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46800 Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-26drm/edid: Populate vrefresh for CEA modesVille Syrjälä
Well have use for the vrefresh information of CEA modes later. Just populate the information into the table to avoid having to calculate it. I'm too lazy to check if someone relies on newly allocated CEA modes having 0 vrefresh, so just clear vrefresh back to 0 when adding the mode to the connector's modelist. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-23drm: add drm_edid_to_eld helper extracting SADs from EDID (v2)Rafał Miłecki
Some devices (ATI/AMD cards) don't support passing ELD struct to the hardware but just require filling specific registers and then the hardware/firmware does the rest. In such cases we need to read the info from SAD blocks and put them in the correct registers. agd5f: note that the returned pointer needs to be kfreed as per Christian's suggestion. v2: fix warning Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-03-23KMS: fix EDID detailed timing frame rateTorsten Duwe
When KMS has parsed an EDID "detailed timing", it leaves the frame rate zeroed. Consecutive (debug-) output of that mode thus yields 0 for vsync. This simple fix also speeds up future invocations of drm_mode_vrefresh(). While it is debatable whether this qualifies as a -stable fix I'd apply it for consistency's sake; drm_helper_probe_single_connector_modes() does the same thing already for all probed modes. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23KMS: fix EDID detailed timing vsync parsingTorsten Duwe
EDID spreads some values across multiple bytes; bit-fiddling is needed to retrieve these. The current code to parse "detailed timings" has a cut&paste error that results in a vsync offset of at most 15 lines instead of 63. See http://en.wikipedia.org/wiki/EDID and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why that needs to be a left shift. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22drm: Add HDMI infoframe helpersThierry Reding
Add a generic helper to fill in an HDMI AVI infoframe with data extracted from a DRM display mode. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-22drm: Move mode tables to drm_edid.cThierry Reding
The modes are only used from within drm_edid.c so we move them there to avoid creating duplicates by multiple inclusion of drm_edid_modes.h. As a side-effect we can also get rid of a few variables that keep track of the number of entries in the tables and use ARRAY_SIZE() instead. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-22drm: Remove duplicate drm_mode_cea_vic()Thierry Reding
The same function had already been merged with a different name. Remove the duplicate one but reuse some of its kerneldoc fragments for the existing implementation. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-20drm: don't add inferred modes for monitors that don't support themPaulo Zanoni
If bit 0 of the features byte (0x18) is set to 0, then, according to the EDID spec, "the display is non-continuous frequency (multi-mode) and is only specified to accept the video timing formats that are listed in Base EDID and certain Extension Blocks". For more information, please see the EDID spec, check the notes of the table that explains the "Feature Support" byte (18h) and also the notes on the tables of the section that explains "Display Range Limits & Additional Timing Description Definition (tag #FDh)". Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45729 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-15drm: shut up invalid edid messagesMaarten Lankhorst
My cheapo monitor has an invalid block 1, resulting in a lot of dmesg spam every few seconds. I get it the first time that the entire block is all 0xff.. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@vger.kernel.org [v3.7] Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-13Revert "drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S"Daniel Vetter
This reverts commit 6f33814bd4d9cfe76033a31b1c0c76c960cd8e4b. The quirk cause a regression, and it looks like the original bug was simply a lack of FIFO bandwidth on the i915G of the reporter. Which should eventually be fixed as soon as we get around to implemented DSPARB FIFO reassignment on gen 3. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52281 Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-20drm/edid: Add drm_rgb_quant_range_selectable()Ville Syrjälä
drm_rgb_quant_range_selectable() will report whether the monitor claims to support for RGB quantization range selection. The information can be found in the CEA Video capability block. v2: s/quantzation/quantization/ in the comment Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: David Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-16Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Daniel writes: A few leftover fixes for 3.8: - VIC support for hdmi infoframes with the associated drm helper, fixes some black TVs (Paulo Zanoni) - Modeset state check (and fixup if the BIOS messed with the hw) for lid-open. modeset-rework fallout. Somehow the original reporter went awol, so this stalled for way too long until we've found a new victim^Wreporter with broken BIOS. - seqno wrap fixes from Mika and Chris. - Some minor fixes all over from various people. - Another race fix in the pageflip vs. unpin code from Chris. - hsw vga resume support and a few more fdi link fixes (only used for vga on hsw) from Paulo. - Regression fix for DMAR from Zhenyu Wang - I've scavenged memory from my DMAR for a while and it broke right away :( - Regression fix from Takashi Iwai for ivb lvds - some w/a needs to be (partially) moved back into place. Note that these are regressions in -next. - One more fix for ivb 3 pipe support - it now actually seems to work. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (25 commits) drm/i915: Fix missed needs_dmar setting drm/i915: Fix shifted screen on top of LVDS on IVY laptop drm/i915: disable cpt phase pointer fdi rx workaround drm/i915: set the LPT FDI RX polarity reversal bit when needed drm/i915: add lpt_init_pch_refclk drm/i915: add support for mPHY destination on intel_sbi_{read, write} drm/i915: reject modes the LPT FDI receiver can't handle drm/i915: fix hsw_fdi_link_train "retry" code drm/i915: Close race between processing unpin task and queueing the flip drm/i915: fixup l3 parity sysfs access check drm/i915: Clear the existing watermarks for g4x when modifying the cursor sr drm/i915: do not access BLC_PWM_CTL2 on pre-gen4 hardware drm/i915: Don't allow ring tail to reach the same cacheline as head drm/i915: Decouple the object from the unbound list before freeing pages drm/i915: Set sync_seqno properly after seqno wrap drm/i915: Include the last semaphore sync point in the error-state drm/i915: Rearrange code to only have a single method for waiting upon the ring drm/i915: Simplify flushing activity on the ring drm/i915: Preallocate next seqno before touching the ring drm/i915: force restore on lid open ...
2012-11-29drm: add drm_mode_cea_vicPaulo Zanoni
This function returns the VIC of the mode. This value can be used when creating AVI InfoFrames. Cc: Thierry Reding <thierry.reding@avionic-design.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50371 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-28drm/edid: tune down debug message in parse_hdmi_vsdbDaniel Vetter
Those tend to be totally not interesting for end-users, and for debugging we tend to dump the entire noise anyway by enabling all debug messages. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57388 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm: use memchr_inv()Akinobu Mita
Use memchr_inv() to check the specified memory region is filled with zero. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-20drm: get cea video id code for a given display modeStephane Marchesin
This patch adds support for getting CEA Video ID Code for a given display mode after matching with edid_cea_modes list. Its index in the list added with one, gives the desired code. This exported function will be used by hdmi drivers for composing AVI info frame data. Signed-off-by: Stephane Marchesin <marcheu@chromium.org> Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-07Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Daniel writes: Bigger -fixes pile, mostly because I've included Ajax' DP dongle stuff, as discussed on irc. Otherwise just small things: - regression fix to finally make 6bpc auto-dither on dp work (Jani) - reinstate an snb ctx w/a that accidentally got lost in a rework (Chris) - fixup the DP train sequence, logic-goof-up uncovered by Coverty (Chris) - fix set_caching locking (Ben) - fix spurious segfault on con-current gtt mmap faulting (Dimitry and Mika) - some pageflip correctness fixes (still hunting down some issues, but these are the worst offenders of confused code that we've tracked down thus far) from Chris and me - fixup swizzling settings on vlv (Jesse) - gt_mode w/a from Ben added, fixes snb gt1 rc6+hw ctx hangs. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix GT_MODE default value drm/i915: don't frob the vblank ts in finish_page_flip drm/i915: call drm_handle_vblank before finish_page_flip drm/i915: print warning if vmi915_gem_fault error is not handled drm/i915: EBUSY status handling added to i915_gem_fault(). drm/i915: Try harder to complete DP training pattern 1 drm/i915: set swizzling to none on VLV drm/dp: Make sink count DP 1.2 aware drm/dp: Document DP spec versions for various DPCD registers drm/i915/dp: Be smarter about connection sense for branch devices drm/i915/dp: Fetch downstream port info if needed during DPCD fetch drm/dp: Update DPCD defines drm: Export drm_probe_ddc() drm/i915: Flush the pending flips on the CRTC before modification drm/i915: Actually invalidate the TLB for the SandyBridge HW contexts w/a drm/i915: Fix set_caching locking drm/i915: use adjusted_mode instead of mode for checking the 6bpc force flag
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 22:10:12 +0000