summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_client.c
AgeCommit message (Collapse)Author
2019-07-09drm/client: remove the exporting of drm_client_closeDenis Efremov
The function drm_client_close is declared as static and marked as EXPORT_SYMBOL. It's a bit confusing for an internal function to be exported. The area of visibility for such function is its .c file and all other modules. Other *.c files of the same module can't use it, despite all other modules can. Relying on the fact that this is the internal function and it's not a crucial part of the API, the patch removes the EXPORT_SYMBOL marking of drm_client_close. Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190703170150.32548-1-efremov@linux.com
2019-07-09drm/fb-helper: Map DRM client buffer only when requiredThomas Zimmermann
This patch changes DRM clients to not map the buffer by default. The buffer, like any buffer object, should be mapped and unmapped when needed. An unmapped buffer object can be evicted to system memory and does not consume video ram until displayed. This allows to use generic fbdev emulation with drivers for low-memory devices, such as ast and mgag200. This change affects the generic framebuffer console. HW-based consoles map their console buffer once and keep it mapped. Userspace can mmap this buffer into its address space. The shadow-buffered framebuffer console only needs the buffer object to be mapped during updates. While not being updated from the shadow buffer, the buffer object can remain unmapped. Userspace will always mmap the shadow buffer. v2: * change DRM client to not map buffer by default * manually map client buffer for fbdev with HW framebuffer Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/315830/
2019-07-09drm/client: Support unmapping of DRM client buffersThomas Zimmermann
DRM clients, such as the fbdev emulation, have their buffer objects mapped by default. Mapping a buffer implicitly prevents its relocation. Hence, the buffer may permanently consume video memory while it's allocated. This is a problem for drivers of low-memory devices, such as ast, mgag200 or older framebuffer hardware, which will then not have enough memory to display other content (e.g., X11). This patch introduces drm_client_buffer_vmap() and _vunmap(). Internal DRM clients can use these functions to unmap and remap buffer objects as needed. There's no reference counting for vmap operations. Callers are expected to either keep buffers mapped (as it is now), or call vmap and vunmap in pairs around code that accesses the mapped memory. v2: * remove several duplicated NULL-pointer checks v3: * style and typo fixes Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/315831/
2019-06-04drm/fb-helper: Remove drm_fb_helper_crtcNoralf Trønnes
struct drm_fb_helper_crtc is now just a wrapper around drm_mode_set so use that directly instead and attach it as a modeset array onto drm_client_dev. drm_fb_helper will use this array to store its modesets which means it will always initialize a drm_client, but it will not register the client (callbacks) unless it's the generic fbdev emulation. Code will later be moved to drm_client, so add code there in a new file drm_client_modeset.c with MIT license to match drm_fb_helper.c. The modeset connector array size is hardcoded for the cloned case to avoid having to pass in a value from the driver. A value of 8 is chosen to err on the safe side. This means that the max connector argument for drm_fb_helper_init() and drm_fb_helper_fbdev_setup() isn't used anymore, a todo entry for this is added. In pan_display_atomic() restore_fbdev_mode_force() is used instead of restore_fbdev_mode_atomic() because that one will later become internal to drm_client_modeset. Locking order: 1. drm_fb_helper->lock 2. drm_master_internal_acquire 3. drm_client_dev->modeset_mutex v6: Improve commit message (Sam Ravnborg) v3: - Use full drm_client_init/release for the modesets (Daniel Vetter) - drm_client_for_each_modeset: use lockdep_assert_held (Daniel Vetter) - Hook up to Documentation/gpu/drm-client.rst (Daniel Vetter) v2: - Add modesets array to drm_client (Daniel Vetter) - Use a new file for the modeset code (Daniel Vetter) - File has to be MIT licensed (Emmanuel Vadot) - Add copyrights from drm_fb_helper.c Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190531140117.37751-3-noralf@tronnes.org
2019-05-27drm: drop use of drmP.h in drm/*Sam Ravnborg
The use of the drmP.h header file is deprecated. Remove use from all files in drm/* so people do not look there and follow a bad example. Build tested allyesconfig,allmodconfig on x86, arm etc. Including alpha that is as always more challenging than the rest. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Link: https://patchwork.freedesktop.org/patch/msgid/20190526173535.32701-8-sam@ravnborg.org
2019-05-20drm: Remove users of drm_format_info_plane_cppMaxime Ripard
drm_format_info_plane_cpp() basically just returns the cpp array content found in the drm_format_info structure. Since it's pretty trivial, let's remove the function and have the users use the array directly Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/c0a78c87cd0410a1819edad2794ad06543c85bb5.1558002671.git-series.maxime.ripard@bootlin.com
2019-05-20drm/fourcc: Pass the format_info pointer to drm_format_plane_cppMaxime Ripard
So far, the drm_format_plane_cpp function was operating on the format's fourcc and was doing a lookup to retrieve the drm_format_info structure and return the cpp. However, this is inefficient since in most cases, we will have the drm_format_info pointer already available so we shouldn't have to perform a new lookup. Some drm_fourcc functions also already operate on the drm_format_info pointer for that reason, so the API is quite inconsistent there. Let's follow the latter pattern and remove the extra lookup while being a bit more consistent. In order to be extra consistent, also rename that function to drm_format_info_plane_cpp and to a static function in the header to match the current policy. Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/32aa13e53dbc98a90207fd290aa8e79f785fb11e.1558002671.git-series.maxime.ripard@bootlin.com
2019-04-11drm/client: Rename drm_client_add() to drm_client_register()Noralf Trønnes
This is done to stay consistent with our naming scheme of _register() = others can start calling us from any thread. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190403125658.32389-1-noralf@tronnes.org
2018-11-20drm/gem: Add drm_gem_object_funcsNoralf Trønnes
This adds an optional function table on GEM objects. The main benefit is for drivers that support more than one type of memory (shmem,vram,cma) for their buffers depending on the hardware it runs on. With the callbacks attached to the GEM object itself, it is easier to have core helpers for the the various buffer types. The driver only has to make the decision about buffer type on GEM object creation and all other callbacks can be handled by the chosen helper. drm_driver->gem_prime_res_obj has not been added since there's a todo to put a reservation_object into drm_gem_object. v3: Add todo entry v2: Drop drm_gem_object_funcs->prime_mmap in favour of drm_gem_prime_mmap() (Daniel Vetter) v1: - drm_gem_object_funcs.map -> .prime_map let it only do PRIME mmap like the function it superseeds (Daniel Vetter) - Flip around the if ladders and make obj->funcs the first choice highlighting the fact that this the new default way of doing it (Daniel Vetter) Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110145647.17580-4-noralf@tronnes.org
2018-10-28Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ...
2018-10-02drm/cma-helper: Fix crash in fbdev error pathNoralf Trønnes
Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
2018-09-14drm: Differentiate the lack of an interface from invalid parameterChris Wilson
If the ioctl is not supported on a particular piece of HW/driver combination, report ENOTSUP (aka EOPNOTSUPP) so that it can be easily distinguished from both the lack of the ioctl and from a regular invalid parameter. v2: Across all the kms ioctls we had a mixture of reporting EINVAL, ENODEV and a few ENOTSUPP (most where EINVAL) for a failed drm_core_check_feature(). Update everybody to report ENOTSUPP. v3: ENOTSUPP is an internal errno! It's value (524) does not correspond to a POSIX errno, the one we want is ENOTSUP. However, uapi/asm-generic/errno.h doesn't include ENOTSUP but man errno says "ENOTSUP and EOPNOTSUPP have the same value on Linux, but according to POSIX.1 these error values should be distinct." so use EOPNOTSUPP as its equivalent. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20180913192050.24812-1-chris@chris-wilson.co.uk
2018-07-13drm/client: Fix double free in error pathNoralf Trønnes
This fixes a static checker warning: drivers/gpu/drm/drm_client.c:289 drm_client_buffer_create() error: double free of 'buffer' Extend drm_client_buffer_delete() to handle the case when there's no dumb buffer attached and drop the extra kfree. Fixes: c76f0f7cb546 ("drm: Begin an API for in-kernel clients") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180712150414.46908-1-noralf@tronnes.org
2018-07-11drm/client: Fix: drm_client_new: Don't require DRM to be registeredNoralf Trønnes
Commit 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") broke almost all drivers that use the CMA helper. The reason is that drm_client_new() requires that the DRM device has been registered, but the drivers register fbdev before registering DRM. Remove the requirement that DRM should be registered when creating a new client. Fixes: c76f0f7cb546 ("drm: Begin an API for in-kernel clients") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180711155632.37437-1-noralf@tronnes.org
2018-07-10drm/debugfs: Add internal client debugfs fileNoralf Trønnes
Print the names of the internal clients currently attached. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-6-noralf@tronnes.org
2018-07-10drm: Begin an API for in-kernel clientsNoralf Trønnes
This the beginning of an API for in-kernel clients. First out is a way to get a framebuffer backed by a dumb buffer. Only GEM drivers are supported. The original idea of using an exported dma-buf was dropped because it also creates an anonomous file descriptor which doesn't work when the buffer is created from a kernel thread. The easy way out is to use drm_driver.gem_prime_vmap to get the virtual address, which requires a GEM object. This excludes the vmwgfx driver which is the only non-GEM driver apart from the legacy ones. A solution for vmwgfx will have to be worked out later if it wants to support the client API which it probably will when we have a bootsplash client. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-2-noralf@tronnes.org