summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_atomic_helper.c
AgeCommit message (Collapse)Author
2017-03-30drm: Fixup failure paths in drm_atomic_helper_set_configDaniel Vetter
I've screwed this up when removing the legacy backoff hack. Fixes: 38b6441e4e75 ("drm/atomic-helper: Remove the backoff hack from set_config") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170329174136.10330-1-daniel.vetter@ffwll.ch
2017-03-29drm/atomic-helper: Remove the backoff hack from set_configDaniel Vetter
Another one bites the dust. Again let's not forget to remove the temporary hidden acquire_ctx assignment, now that we pass this all around explicitly it can go away again. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-20-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->set_configDaniel Vetter
Surprisingly a lot of legacy drivers roll their own, for runtime pm and because vmwgfx. Also make nouveau's set_config static while at it. Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch
2017-03-29drm/atomic-helper: remove backoff hack from page_flipDaniel Vetter
Yay, we can now properly retry in case of deadlocks or whatever! Also don't forget to remove the transitional crtc->acquire_ctx assignment again. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-13-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->page_flip(_target)Daniel Vetter
Again just going through the motions, no functional changes in here. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch
2017-03-29drm/atomic-helper: remove backoff hack from disable/update_planeDaniel Vetter
We can now properly retry at the top level, yay! v2: Also remove the temporary acquire_ctx hack again, no longer needed! Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-6-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->plane_disableDaniel Vetter
Nouveau had a few direct calls to ->disable_plane, I replaced those with drm_plane_force_disable. Same story for shmob. Otherwise no code changes. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch
2017-03-29drm: Add acquire ctx parameter to ->update_planeDaniel Vetter
Just rolling it out, no code change here. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch
2017-03-27drm/atomic: Introduce drm_atomic_helper_shutdownDaniel Vetter
The trouble here is that it does multiple atomic commits under one drm_modeset_lock_all, which breaks the behind-the-scenes acquire context magic that function pulls off. It's much better to have one overall atomic commit. That we still have multiple atomic commits prevents us from adding some pretty useful debug checks to the atomic machinery. Hence it is really a bad idea to call the legacy drm_crtc_force_disable_all() function. There's 2 atomic drivers using this still, nouveau and tinydrm. To fix this, introduce a new drm_atomic_helper_shutdown() by extracting the code from i915. While at it improve kernel-doc and catch future offenders by sprinkling a WARN_ON into the legacy function. We should probably move those into the legacy modeset helpers, too ... v2: Make it compile on arm drivers too (Noralf). v3: Correct kerneldoc to point at _disable_all(). Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Ben Skeggs <bskeggs@redhat.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch
2017-03-06drm/atomic: Convert get_existing_state callers to get_old/new_state, v4.Maarten Lankhorst
This is a straightforward conversion that converts all the users of get_existing_state in atomic core to use get_old_state or get_new_state Changes since v1: - Fix using the wrong state in drm_atomic_helper_update_legacy_modeset_state. Changes since v2: - Use the correct state in disable_outputs() Changes since v3: - Rebase for link status training. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/df91a9f9-005e-bcbd-1f74-03c38e1e21dd@linux.intel.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-03-06drm/atomic: Make drm_atomic_plane_disabling easier to understand.Maarten Lankhorst
This function becomes a lot simpler when having passed both the old and new state to it. Looking at all callers, it seems that old_plane_state is never NULL so the check can be dropped. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1487256430-7625-3-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-03-06drm/atomic: Fix atomic helpers to use the new iterator macros, v3.Maarten Lankhorst
There are new iterator macros that annotate whether the new or old state should be used. This is better than using a state that depends on whether it's called before or after swap. For clarity, also rename the variables from $obj_state to (old,new)_$obj_state as well. Changes since v1: - Use old/new_*_state for variable names as much as possible. (pinchartl) - Expand commit message. Changes since v2: - Rebase on top of link training patches. - free -> cleanup (pinchartl) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/aafa0d4d-474d-441f-3685-fa6c042ef37e@linux.intel.com Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-02-28drm: Rename connector list iterator APIThierry Reding
Currently the functions that initialize and tear down a connector iterator use the _get() and _put() suffixes. However, these suffixes are typically used by reference counting functions. Make these function names a little more consistent by changing the suffixes to _begin() and _end(), which is a fairly common pattern in the rest of the Linux kernel. Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-8-thierry.reding@gmail.com
2017-02-28drm: Introduce drm_property_blob_{get,put}()Thierry Reding
For consistency with other reference counting APIs in the kernel, add drm_property_blob_get() and drm_property_blob_put() to reference count DRM blob properties. Compatibility aliases are added to keep existing code working. To help speed up the transition, all the instances of the old functions in the DRM core are already replaced in this commit. A semantic patch is provided that can be used to convert all drivers to the new helpers. Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-7-thierry.reding@gmail.com
2017-02-28drm: Introduce drm_framebuffer_{get,put}()Thierry Reding
For consistency with other reference counting APIs in the kernel, add drm_framebuffer_get() and drm_framebuffer_put() to reference count DRM framebuffers. Compatibility aliases are added to keep existing code working. To help speed up the transition, all the instances of the old functions in the DRM core are already replaced in this commit. The existing semantic patch for the DRM subsystem-wide conversion is extended to account for these new helpers. Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-5-thierry.reding@gmail.com
2017-02-28drm: Introduce drm_connector_{get,put}()Thierry Reding
For consistency with other reference counting APIs in the kernel, add drm_connector_get() and drm_connector_put() functions to reference count connectors. Compatibility aliases are added to keep existing code working. To help speed up the transition, all the instances of the old functions in the DRM core are already replaced in this commit. The existing semantic patch for mode object reference count conversion is extended for these new helpers. Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170228144643.5668-4-thierry.reding@gmail.com
2017-02-28drm/atomic: Make disable_all helper fully disable the crtc.Maarten Lankhorst
It seems that nouveau requires this, so best to do this in the helper. This allows nouveau to use the atomic suspend helper. Cc: nouveau@lists.freedesktop.org Acked-by: Ben Skeggs <bskeggs@redhat.com> #irc Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1487685102-31991-2-git-send-email-maarten.lankhorst@linux.intel.com
2017-02-27drm: Add a new connector atomic property for link statusManasi Navare
At the time userspace does setcrtc, we've already promised the mode would work. The promise is based on the theoretical capabilities of the link, but it's possible we can't reach this in practice. The DP spec describes how the link should be reduced, but we can't reduce the link below the requirements of the mode. Black screen follows. One idea would be to have setcrtc return a failure. However, it already should not fail as the atomic checks have passed. It would also conflict with the idea of making setcrtc asynchronous in the future, returning before the actual mode setting and link training. Another idea is to train the link "upfront" at hotplug time, before pruning the mode list, so that we can do the pruning based on practical not theoretical capabilities. However, the changes for link training are pretty drastic, all for the sake of error handling and DP compliance, when the most common happy day scenario is the current approach of link training at mode setting time, using the optimal parameters for the mode. It is also not certain all hardware could do this without the pipe on; not even all our hardware can do this. Some of this can be solved, but not trivially. Both of the above ideas also fail to address link degradation *during* operation. The solution is to add a new "link-status" connector property in order to address link training failure in a way that: a) changes the current happy day scenario as little as possible, to avoid regressions, b) can be implemented the same way by all drm drivers, c) is still opt-in for the drivers and userspace, and opting out doesn't regress the user experience, d) doesn't prevent drivers from implementing better or alternate approaches, possibly without userspace involvement. And, of course, handles all the issues presented. In the usual happy day scenario, this is always "good". If something fails during or after a mode set, the kernel driver can set the link status to "bad" and issue a hotplug uevent for userspace to have it re-check the valid modes through GET_CONNECTOR IOCTL, and try modeset again. If the theoretical capabilities of the link can't be reached, the mode list is trimmed based on that. v7 by Jani: * Rebase, simplify set property while at it, checkpatch fix v6: * Fix a typo in kernel doc (Sean Paul) v5: * Clarify doc for silent rejection of atomic properties by driver (Daniel Vetter) v4: * Add comments in kernel-doc format (Daniel Vetter) * Update the kernel-doc for link-status (Sean Paul) v3: * Fixed a build error (Jani Saarinen) v2: * Removed connector->link_status (Daniel Vetter) * Set connector->state->link_status in drm_mode_connector_set_link_status_property (Daniel Vetter) * Set the connector_changed flag to true if connector->state->link_status changed. * Reset link_status to GOOD in update_output_state (Daniel Vetter) * Never allow userspace to set link status from Good To Bad (Daniel Vetter) Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Tony Cheng <tony.cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net> (for the -modesetting patch) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/0182487051aa9f1594820e35a4853de2f8747b4e.1481883920.git.jani.nikula@intel.com
2017-02-26Merge airlied/drm-next into drm-misc-nextDaniel Vetter
Backmerge the main pull request to sync up with all the newly landed drivers. Otherwise we'll have chaos even before 4.12 started in earnest. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-02-14drm: ensure atomic messages consistently include the name of the componentRussell King
Most DRM messages include three pieces of information: the type of the component (CRTC, ENCODER, CONNECTOR etc), the DRM object ID of the component, and the component name. However, there are some messages which omit the last piece of identifying information. This makes it harder to debug failures when these messages are printed, because the DRM object ID doesn't supply enough information to know which piece of hardware had a problem. Update the atomic modeset code to always print the component name along with the type and DRM object ID. Fixes: 4cba68507cf5 ("drm/atomic-helper: Reject legacy flips on a disabled pipe") Fixes: 8d4d0d700dda ("drm/atomic-helper: Print an error if vblank wait times out") Fixes: 5481c8fb1da2 ("drm/atomic-helper: Check encoder/crtc constraints") Fixes: 99cf4a29fa24 ("drm/atomic: Add current-mode blob to CRTC state") Fixes: cc4ceb484b37 ("drm: Global atomic state handling") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> [danvet: Wiggle in conflicting hunk.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-02-14drm/atomic: Add new iterators over all state, v3.Maarten Lankhorst
Add for_each_(old)(new)_(plane,connector,crtc)_in_state iterators to replace the old for_each_xxx_in_state ones. This is useful for >1 flip depth and getting rid of all xxx->state dereferences. This requires extra fixups done when committing a state after duplicating, which in general isn't valid but is used by suspend/resume. To handle these, introduce drm_atomic_helper_commit_duplicated_state which performs those fixups before checking & committing the state. Changes since v1: - Remove nonblock parameter for commit_duplicated_state. Changes since v2: - Use commit_duplicated_state for i915 load detection. - Add WARN_ON(old_state != obj->state) before swapping. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484559464-27107-2-git-send-email-maarten.lankhorst@linux.intel.com
2017-02-12drm: Constify drm_mode_config atomic helper private pointerLaurent Pinchart
The drm_mode_config helper private field points to a structure of function pointers that don't need to be modified at runtime. Make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170102091613.6310-1-laurent.pinchart@ideasonboard.com
2017-02-08drm/atomic: fix an error code in mode_fixup()Dan Carpenter
Having "ret" be a bool type works for everything except ret = funcs->atomic_check(). The other functions all return zero on error but ->atomic_check() returns negative error codes. We want to propagate the error code but instead we return 1. I found this bug with static analysis and I don't know if it affects run time. Fixes: 4cd4df8080a3 ("drm/atomic: Add ->atomic_check() to encoder helpers") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170207234601.GA23981@mwanda
2017-02-03drm/atomic: Save flip flags in drm_crtc_stateAndrey Grodzovsky
Allows using atomic flip helpers for drivers using ASYNC flip. Remove ASYNC_FLIP restriction in helpers and caches the page flip flags in drm_crtc_state to be used in the low level drivers. v2: Resending the patch since the original was broken. v3: Save flag in crtc_state instead of plane_state v4: Reset the flag before using again. v5: Fix type in header. Rename the field to pageflip_flags. Remove unrelated hunk. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486072591-3893-2-git-send-email-Andrey.Grodzovsky@amd.com
2017-02-01Merge tag 'drm-misc-next-2017-01-30' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Another round of -misc stuff: - Noralf debugfs cleanup cleanup (not yet everything, some more driver patches awaiting acks). - More doc work. - edid/infoframe fixes from Ville. - misc 1-patch fixes all over, as usual Noralf needs this for his tinydrm pull request. * tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits) drm/vc4: Remove vc4_debugfs_cleanup() dma/fence: Export enable-signaling tracepoint for emission by drivers drm/tilcdc: Remove tilcdc_debugfs_cleanup() drm/tegra: Remove tegra_debugfs_cleanup() drm/sti: Remove drm_debugfs_remove_files() calls drm/radeon: Remove drm_debugfs_remove_files() call drm/omap: Remove omap_debugfs_cleanup() drm/hdlcd: Remove hdlcd_debugfs_cleanup() drm/etnaviv: Remove etnaviv_debugfs_cleanup() drm/etnaviv: allow build with COMPILE_TEST drm/amd/amdgpu: Remove drm_debugfs_remove_files() call drm/prime: Clarify DMA-BUF/GEM Object lifetime drm/ttm: Make sure BOs being swapped out are cacheable drm/atomic: Remove drm_atomic_debugfs_cleanup() drm: drm_minor_register(): Clean up debugfs on failure drm: debugfs: Remove all files automatically on cleanup drm/fourcc: add vivante tiled layout format modifiers drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F drm/edid: Set AVI infoframe Q even when QS=0 drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range() ...
2017-01-27Merge tag 'drm-misc-next-2017-01-23' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next - cleanups&fixes for dw-hdmi bride driver (Laurent) - updates for adv bridge driver (John Stultz) for nexus - drm_crtc_from_index helper rollout (Shawn Guo) - removing drm_framebuffer_unregister_private from drivers&core - target_vblank (Andrey Grodzovsky) - misc tiny stuff * tag 'drm-misc-next-2017-01-23' of git://anongit.freedesktop.org/git/drm-misc: (49 commits) drm: qxl: Open code teardown function for qxl drm: qxl: Open code probing sequence for qxl drm/bridge: adv7511: Re-write the i2c address before EDID probing drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be reused internally drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event() drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context drm: vc4: use crtc helper drm_crtc_from_index() drm: tegra: use crtc helper drm_crtc_from_index() drm: nouveau: use crtc helper drm_crtc_from_index() drm: mediatek: use crtc helper drm_crtc_from_index() drm: kirin: use crtc helper drm_crtc_from_index() drm: exynos: use crtc helper drm_crtc_from_index() dt-bindings: display: dw-hdmi: Clean up DT bindings documentation drm: bridge: dw-hdmi: Assert SVSRET before resetting the PHY drm: bridge: dw-hdmi: Fix the name of the PHY reset macros drm: bridge: dw-hdmi: Define and use macros for PHY register addresses drm: bridge: dw-hdmi: Detect PHY type at runtime drm: bridge: dw-hdmi: Handle overflow workaround based on device version ...
2017-01-27Merge branch 'master' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge Linus master to get the connector locking revert. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits) sysctl: fix proc_doulongvec_ms_jiffies_minmax() Revert "drm/probe-helpers: Drop locking from poll_enable" MAINTAINERS: add Dan Streetman to zbud maintainers MAINTAINERS: add Dan Streetman to zswap maintainers mm: do not export ioremap_page_range symbol for external module mn10300: fix build error of missing fpu_save() romfs: use different way to generate fsid for BLOCK or MTD frv: add missing atomic64 operations mm, page_alloc: fix premature OOM when racing with cpuset mems update mm, page_alloc: move cpuset seqcount checking to slowpath mm, page_alloc: fix fast-path race with cpuset update or removal mm, page_alloc: fix check for NULL preferred_zone kernel/panic.c: add missing \n fbdev: color map copying bounds checking frv: add atomic64_add_unless() mm/mempolicy.c: do not put mempolicy before using its nodemask radix-tree: fix private list warnings Documentation/filesystems/proc.txt: add VmPin mm, memcg: do not retry precharge charges proc: add a schedule point in proc_pid_readdir() ...
2017-01-26drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/Daniel Vetter
The function operates on modes, not CRTCs. Also move it into drm_modes.[hc]. Spotted while reviewing CRTC docs. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-15-daniel.vetter@ffwll.ch
2017-01-25drm/kms-helpers: Use recommened kerneldoc for struct member refsDaniel Vetter
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Comments from Gustavo. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch
2017-01-23drm/atomic: make release_crtc_commit() staticWei Yongjun
Fixes the following sparse warning: drivers/gpu/drm/drm_atomic_helper.c:1360:6: warning: symbol 'release_crtc_commit' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170112142157.14684-1-weiyj.lk@gmail.com
2017-01-12drm/atomic: Add target_vblank support in atomic helpers (v2)Andrey Grodzovsky
Allows usage of the new page_flip_target hook for drivers implementing the atomic path. Provides default atomic helper for the new hook. v2: Update code sharing logic between exsiting and the new flip hooks. Improve kerneldoc. Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483735180-4173-1-git-send-email-Andrey.Grodzovsky@amd.com
2017-01-04drm: Clean up planes in atomic commit helper failure pathLaurent Pinchart
If waiting for fences fails for blocking commits, planes must be cleaned up before returning. Cc: stable@vger.kernel.org Fixes: f6ce410a59a4 ("drm/fence: allow fence waiting to be interrupted by userspace") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170102231427.7192-1-laurent.pinchart@ideasonboard.com
2017-01-04drm: reference count event->completionDaniel Vetter
When writing the generic nonblocking commit code I assumed that through clever lifetime management I can assure that the completion (stored in drm_crtc_commit) only gets freed after it is completed. And that worked. I also wanted to make nonblocking helpers resilient against driver bugs, by having timeouts everywhere. And that worked too. Unfortunately taking boths things together results in oopses :( Well, at least sometimes: What seems to happen is that the drm event hangs around forever stuck in limbo land. The nonblocking helpers eventually time out, move on and release it. Now the bug I tested all this against is drivers that just entirely fail to deliver the vblank events like they should, and in those cases the event is simply leaked. But what seems to happen, at least sometimes, on i915 is that the event is set up correctly, but somohow the vblank fails to fire in time. Which means the event isn't leaked, it's still there waiting for eventually a vblank to fire. That tends to happen when re-enabling the pipe, and then the trap springs and the kernel oopses. The correct fix here is simply to refcount the crtc commit to make sure that the event sticks around even for drivers which only sometimes fail to deliver vblanks for some arbitrary reasons. Since crtc commits are already refcounted that's easy to do. References: https://bugs.freedesktop.org/show_bug.cgi?id=96781 Cc: Jim Rees <rees@umich.edu> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161221102331.31033-1-daniel.vetter@ffwll.ch
2016-12-30drm/atomic-helpers: Remove outdated commentDaniel Vetter
We forgot to clean this up when adding connector refcounting. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-10-git-send-email-daniel.vetter@ffwll.ch
2016-12-30drm/doc: use preferred struct reference in kernel-docDaniel Vetter
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i Originally I wasnt a friend of this style because I thought a line-break between the "&struct" and "foo" part would break it. But a quick test shows that " * &struct \n * foo\n" works pefectly well with current kernel-doc. So time to mass-apply these changes! Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
2016-12-19drm/atomic: Remove drm_atomic_helper_framebuffer_changed.Maarten Lankhorst
This function is now completely unused, zap it. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481204729-9058-6-git-send-email-maarten.lankhorst@linux.intel.com
2016-12-19drm/atomic: Wait for vblank whenever a plane is added to state.Maarten Lankhorst
There's 2 reasons for doing a vblank wait: - To fulfill uabi expectations, but the legacy ioctls are ill-defined enough that we really only need this when we do send out an event. - To make sure we don't tear down mappings before the scanout engine stops accessing it. The later is problematic with the current code since e.g. rotation might need a different mapping than normal orientation. And rotation is a plane property, and not on the fb. Hence we need to remove this optimization. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [danvet: Completely new commit message.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481204729-9058-5-git-send-email-maarten.lankhorst@linux.intel.com
2016-12-19drm/atomic: Clean up wait_for_vblanks, v2.Maarten Lankhorst
Stop relying on a per crtc_state last_vblank_count, we shouldn't touch crtc_state after commit. Move it to atomic_state->crtcs. Also stop re-using new_crtc_state->enable, we can now simply set a bitmask with crtc_crtc_mask. Changes since v1: - Keep last_vblank_count in __drm_crtc_state. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/8e4759a4-24d3-3f80-bd1a-1e7a9c83b612@linux.intel.com
2016-12-19drm/atomic: Unconditionally call prepare_fb.Maarten Lankhorst
Atomic drivers may set properties like rotation on the same fb, which may require a call to prepare_fb even when framebuffer stays identical. Instead of handling all the special cases in the core, let the driver decide when prepare_fb and cleanup_fb are noops. This is a revert of: commit fcc60b413d14dd06ddbd79ec50e83c4fb2a097ba Author: Keith Packard <keithp@keithp.com> Date: Sat Jun 4 01:16:22 2016 -0700 drm: Don't prepare or cleanup unchanging frame buffers [v3] The original commit mentions that this prevents waiting in i915 on all previous rendering during cursor updates, but there are better ways to fix this. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/6d82f9b6-9d16-91d1-d176-4a37b09afc44@linux.intel.com
2016-12-18drm: Convert all helpers to drm_connector_list_iterDaniel Vetter
Mostly nothing special (except making sure that really all error paths and friends call iter_put). v2: Don't forget the raw connector_list walking in drm_helper_move_panel_connectors_to_head. That one unfortunately can't be converted to the iterator helpers, but since it's just some list splicing best to just wrap the entire thing up in one critical section. v3: Bail out after iter_put (Harry). Cc: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161215155843.13408-1-daniel.vetter@ffwll.ch
2016-12-08drm/atomic: Use active instead of enable in wait_for_vblanks.Maarten Lankhorst
When DPMS was introduced to atomic, vblanks only worked when the crtc was enabled and active. wait_for_vblanks were not converted to check for crtc_state->active, which may cause an attempt for vblank_get to fail. This is probably harmless, but convert from enable to active anyway. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481204729-9058-2-git-send-email-maarten.lankhorst@linux.intel.com
2016-12-06drm/atomic: doc: remove old comment about nonblocking commitsGustavo Padovan
We now support nonblocking commits on drm_atomic_helper_commit() so the comment is not valid anymore. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1480946626-30917-1-git-send-email-gustavo@padovan.org
2016-12-06drm: allow changing DPMS modeMarta Lofstedt
The drm_atomic_helper_connector_dpms will set the connector back the old DPMS state before returning. This makes it impossible to change DPMS state of the connector. Fixes: 0853695c3ba46f97dfc0b5885f7b7e640ca212dd v2: edit of commit message Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Engestrom <eric.engestrom@imgtec.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: dri-devel@lists.freedesktop.org Cc: <drm-intel-fixes@lists.freedesktop.org> Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161205120408.13056-1-marta.lofstedt@intel.com
2016-11-22drm/atomic: Unconfuse the old_state mess in commmit_tailDaniel Vetter
I totally butcherd the job on typing the kernel-doc for these, and no one realized. Noticed by Russell. Maarten has a more complete approach to this confusion, by making it more explicit what the new/old state is, instead of this magic switching behaviour. v2: - Liviu pointed out that wait_for_fences is even more magic. Leave that as @state, and document @pre_swap better. - While at it, patch in header for the reference section. - Fix spelling issues Russell noticed. v3: Fix up the @pre_swap note (Liviu): Also s/synchronous/blocking/, since async flip is something else than non-blocking. Cc: Liviu Dudau <liviu.dudau@arm.com> Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Fixes: 9f2a7950e77a ("drm/atomic-helper: nonblocking commit support") Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161121171802.24147-1-daniel.vetter@ffwll.ch
2016-11-16drm/fence: add in-fences supportGustavo Padovan
There is now a new property called IN_FENCE_FD attached to every plane state that receives sync_file fds from userspace via the atomic commit IOCTL. The fd is then translated to a fence (that may be a fence_array subclass or just a normal fence) and then used by DRM to fence_wait() for all fences in the sync_file to signal. So it only commits when all framebuffers are ready to scanout. v2: Comments by Daniel Vetter: - remove set state->fence = NULL in destroy phase - accept fence -1 as valid and just return 0 - do not call fence_get() - sync_file_fences_get() already calls it - fence_put() if state->fence is already set, in case userspace set the property more than once. v3: WARN_ON if fence is set but state has no FB v4: Comment from Maarten Lankhorst - allow set fence with no related fb v5: rename FENCE_FD to IN_FENCE_FD v6: Comments by Daniel Vetter: - rename plane_state->in_fence back to "fence" - re-introduce WARN_ON if fence set but no fb - rebase after fence -> dma_fence rename v7: Comments by Brian Starkey - set state->fence to NULL when duplicating the state - fail if IN_FENCE_FD was already set v8: rebase against latest drm-misc Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> [danvet: Rebase onto extracted drm_mode_config.[hc].] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-11-07Backmerge tag 'v4.9-rc4' into drm-nextDave Airlie
Linux 4.9-rc4 This is needed for nouveau development.
2016-10-26drm: Don't force all planes to be added to the state due to zposVille Syrjälä
We don't want all planes to be added to the state whenever a plane with fixed zpos gets enabled/disabled. This is true especially for eg. cursor planes on i915, as we want cursor updates to go through w/o throttling. Same holds for drivers that don't support zpos at all (i915 actually falls into this category right now since we've not yet added zpos support). Allow drivers more freedom by letting them deal with zpos themselves instead of doing it in drm_atomic_helper_check_planes() unconditionally. Let's just inline the required calls into all the driver that currently depend on this. v2: Inline the stuff into the drivers instead of adding another helper, document things better (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lyude <cpaul@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org Fixes: 44d1240d006c ("drm: add generic zpos property") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476111056-12734-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-25dma-buf: Rename struct fence to dma_fenceChris Wilson
I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-21drm: Add drm_rotation_90_or_270()Ville Syrjälä
We have intel_rotation_90_or_270() in i915 to check if the rotation is 90 or 270 degrees. Similar checks are elsewhere in drm, so let's move the helper into a central place and use it everwhere. v2: Drop the BIT() Convert all new intel_rotation_90_or_270() calls Deal with superfluous code shuffling Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-2-git-send-email-ville.syrjala@linux.intel.com
2016-10-17drm: Add reference counting to drm_atomic_stateChris Wilson
drm_atomic_state has a complicated single owner model that tracks the single reference from allocation through to destruction on another thread - or perhaps on a local error path. We can simplify this tracking by using reference counting (at a cost of a few more atomics). This is even more beneficial when the lifetime of the state becomes more convoluted than being passed to a single worker thread for the commit. v2: Double check !intel atomic_commit functions for missing gets v3: Update kerneldocs Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 04:31:47 +0000