summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/drm_atomic.c
AgeCommit message (Collapse)Author
2018-10-28Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ...
2018-10-18drm: Get ref on CRTC commit object when waiting for flip_doneLeo Li
This fixes a general protection fault, caused by accessing the contents of a flip_done completion object that has already been freed. It occurs due to the preemption of a non-blocking commit worker thread W by another commit thread X. X continues to clear its atomic state at the end, destroying the CRTC commit object that W still needs. Switching back to W and accessing the commit objects then leads to bad results. Worker W becomes preemptable when waiting for flip_done to complete. At this point, a frequently occurring commit thread X can take over. Here's an example where W is a worker thread that flips on both CRTCs, and X does a legacy cursor update on both CRTCs: ... 1. W does flip work 2. W runs commit_hw_done() 3. W waits for flip_done on CRTC 1 4. > flip_done for CRTC 1 completes 5. W finishes waiting for CRTC 1 6. W waits for flip_done on CRTC 2 7. > Preempted by X 8. > flip_done for CRTC 2 completes 9. X atomic_check: hw_done and flip_done are complete on all CRTCs 10. X updates cursor on both CRTCs 11. X destroys atomic state 12. X done 13. > Switch back to W 14. W waits for flip_done on CRTC 2 15. W raises general protection fault The error looks like so: general protection fault: 0000 [#1] PREEMPT SMP PTI **snip** Call Trace: lock_acquire+0xa2/0x1b0 _raw_spin_lock_irq+0x39/0x70 wait_for_completion_timeout+0x31/0x130 drm_atomic_helper_wait_for_flip_done+0x64/0x90 [drm_kms_helper] amdgpu_dm_atomic_commit_tail+0xcae/0xdd0 [amdgpu] commit_tail+0x3d/0x70 [drm_kms_helper] process_one_work+0x212/0x650 worker_thread+0x49/0x420 kthread+0xfb/0x130 ret_from_fork+0x3a/0x50 Modules linked in: x86_pkg_temp_thermal amdgpu(O) chash(O) gpu_sched(O) drm_kms_helper(O) syscopyarea sysfillrect sysimgblt fb_sys_fops ttm(O) drm(O) Note that i915 has this issue masked, since hw_done is signaled after waiting for flip_done. Doing so will block the cursor update from happening until hw_done is signaled, preventing the cursor commit from destroying the state. v2: The reference on the commit object needs to be obtained before hw_done() is signaled, since that's the point where another commit is allowed to modify the state. Assuming that the new_crtc_state->commit object still exists within flip_done() is incorrect. Fix by getting a reference in setup_commit(), and releasing it during default_clear(). Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1539611200-6184-1-git-send-email-sunpeng.li@amd.com
2018-09-27BackMerge v4.19-rc5 into drm-nextDave Airlie
Sean Paul requested an -rc5 backmerge from some sun4i fixes. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-09-17drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creationLyude Paul
As pointed out by Daniel Vetter, we should be usinng drm_drv_uses_atomic_modeset() for determining whether or not we want to make the debugfs nodes for atomic instead of checking DRIVER_ATOMIC, as the former isn't an accurate representation of whether or not the driver is actually using atomic modesetting internally (even though it might not be exposing atomic capabilities). Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Reviewed-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180917173733.21293-1-lyude@redhat.com
2018-09-09drm: extract drm_atomic_uapi.cDaniel Vetter
This leaves all the commit/check and state handling in drm_atomic.c, while pulling all the uapi glue and the huge ioctl itself into a seprate file. This seems to almost perfectly split the rather big drm_atomic.c file into 2 equal sizes. Also adjust the kerneldoc and type a very terse overview text. v2: Rebase. v3: Fix tiny typo. v4: - Fixup armada, newly converted atomic driver hooray! - Fixup msm/dpu1, newly added too. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
2018-09-09drm/atomic: trim driver interface/docsDaniel Vetter
Remove the kerneldoc and EXPORT_SYMBOL which aren't used and really shouldn't ever be used by drivers directly. Unfortunately this means we need to move the set_writeback_fb function around to avoid a forward decl. Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-5-daniel.vetter@ffwll.ch
2018-08-24drm: Add per-plane pixel blend mode propertyLowry Li
Pixel blend modes represent the alpha blending equation selection, describing how the pixels from the current plane are composited with the background. Adds a pixel_blend_mode to drm_plane_state and a blend_mode_property to drm_plane, and related support functions. Defines three blend modes in drm_blend.h. Changes since v1: - Moves the blending equation into the DOC comment - Refines the comments of drm_plane_create_blend_mode_property to not enumerate the #defines, but instead the string values - Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha Changes since v2: - Refines the comments of drm_plane_create_blend_mode_property: 1) Puts the descriptions (after the ":") on a new line 2) Adds explaining why @supported_modes need PREMUL as default Changes since v3: - Refines drm_plane_create_blend_mode_property(). drm_property_add_enum() can calculate the index itself just fine, so no point in having the caller pass it in. - Since the current DRM assumption is that alpha is premultiplied as default, define DRM_MODE_BLEND_PREMULTI as 0 will be better. - Refines some comments. Changes since v4: - Adds comments in drm_blend.h. - Removes setting default value in drm_plane_create_blend_mode_property() as it is already in __drm_atomic_helper_plane_reset(). - Fixes to use state->pixel_blend_mode instead of using plane->state->pixel_blend_mode in reset function. - Rebases on drm-misc-next. Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Lowry Li <lowry.li@arm.com> Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/245734/
2018-07-07drm/atomic: Avoid connector to writeback_connector castsBoris Brezillon
Use container_of() instead of type casting so that it keeps working even if base is moved inside the drm_writeback_connector struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-2-boris.brezillon@bootlin.com
2018-07-06Merge drm-upstream/drm-next into drm-misc-nextGustavo Padovan
Pull in the malidp writeback implementation for further work on writeback in drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2018-07-06drm: print plane state normalized zpos valueBenjamin Gaignard
When dumping plane state print normalized zpos value as done for the other plane state fields. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605135407.20214-2-benjamin.gaignard@linaro.org
2018-07-06Merge commit 'refs/for-upstream/mali-dp' of git://linux-arm.org/linux-ld ↵Dave Airlie
into drm-next "mali-dp driver changes for drm-next, includes the driver implementation for writeback, improvements for power management handling in the driver and a debugfs entry for reporting possible internal errors. Please pull at your earliest convenience. Boris Brezillon is also interested in this pull as he is going to change slightly the parameter for the writeback connector's atomic_commit() and he needs to fix the mali-dp driver in his series." Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705144408.GH15340@e110455-lin.cambridge.arm.com
2018-07-05drm: mali-dp: Add writeback connectorBrian Starkey
Mali-DP has a memory writeback engine which can be used to write the composition result to a memory buffer. Expose this functionality as a DRM writeback connector on supported hardware. Changes since v1: Daniel Vetter: - Don't require a modeset when writeback routing changes - Make writeback connector always disconnected Changes since v2: - Rebase onto new drm_writeback_connector - Add reset callback, allocating subclassed state Daniel Vetter: - Squash out-fence support into this commit Gustavo Padovan: - Don't signal fence directly from driver (and drop malidp_mw_job) Changes since v3: - Modifications to fit with Mali-DP commit tail changes Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2018-07-02drm: Add drm_connector_mask()Ville Syrjälä
Add drm_connector_mask() which returns the 1<<index for the connector. We already have an identical drm_crtc_mask() for crtcs. Mostly performed with coccinelle: @@ @@ - (1<<drm_connector_index( + drm_connector_mask( ...) - ) @@ @@ - 1<<drm_connector_index( + drm_connector_mask( ...) @@ @@ - BIT(drm_connector_index( + drm_connector_mask( ...) - ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-4-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-02drm: Add drm_plane_mask()Ville Syrjälä
Add drm_plane_mask() which returns the 1<<index for the plane. We already have an identical drm_crtc_mask() for crtcs. Mostly performed with coccinelle: @@ @@ - (1<<drm_plane_index( + drm_plane_mask( ...) - ) @@ @@ - 1<<drm_plane_index( + drm_plane_mask( ...) @@ @@ - BIT(drm_plane_index( + drm_plane_mask( ...) - ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-1-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-06-20Merge drm-upstream/drm-next into drm-misc-nextGustavo Padovan
We got a few conflicts in drm_atomic.c after merging the DRM writeback support, now we need a backmerge to unlock develop development on drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2018-06-20drm: writeback: Add out-fences for writeback connectorsBrian Starkey
Add the WRITEBACK_OUT_FENCE_PTR property to writeback connectors, to enable userspace to get a fence which will signal once the writeback is complete. It is not allowed to request an out-fence without a framebuffer attached to the connector. A timeline is added to drm_writeback_connector for use by the writeback out-fences. In the case of a commit failure or DRM_MODE_ATOMIC_TEST_ONLY, the fence is set to -1. Changes from v2: - Rebase onto Gustavo Padovan's v9 explicit sync series - Change out_fence_ptr type to s32 __user * - Set *out_fence_ptr to -1 in drm_atomic_connector_set_property - Store fence in drm_writeback_job Gustavo Padovan: - Move out_fence_ptr out of connector_state - Signal fence from drm_writeback_signal_completion instead of in driver directly Changes from v3: - Rebase onto commit 7e9081c5aac7 ("drm/fence: fix memory overwrite when setting out_fence fd") (change out_fence_ptr to s32 __user *, for real this time.) - Update documentation around WRITEBACK_OUT_FENCE_PTR Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/229036/
2018-06-20drm: Add writeback connector typeBrian Starkey
Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2018-06-15drm/atomic: Set current atomic state in drm_private_stateAlexandru Gheorghe
drm_private_state has a back pointer to the drm_atomic_state, however that was not initialized in drm_atomic_get_private_obj_state after duplication, as it is the case for other drm atomic getters Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/1527701452-1934-1-git-send-email-alexandru-cosmin.gheorghe@arm.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-06-15drm: Print bad user modesVille Syrjälä
Print out the modeline when we reject a bad user mode. Avoids having to guess why it was rejected. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-2-ville.syrjala@linux.intel.com Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2018-06-15drm/atomic: Improve debug messagesVille Syrjälä
Print the id/name of the object we're dealing with. Makes it easier to figure out what's going on. Also toss in a few extra debug prints that might be useful. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-1-ville.syrjala@linux.intel.com Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2018-06-11drm: Stop updating plane->crtc/fb/old_fb on atomic driversVille Syrjälä
Stop playing around with plane->crtc/fb/old_fb with atomic drivers. Make life a lot simpler when we don't have to do the magic old_fb vs. fb dance around plane updates. That way we can't risk plane->fb getting out of sync with plane->state->fb and we're less likely to leak any refcounts as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-14-ville.syrjala@linux.intel.com Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-05-18Merge drm-fixes-for-v4.17-rc6-urgent into drm-nextDave Airlie
Need to backmerge some nouveau fixes to reduce the nouveau -next conflicts a lot. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-05-17drm: content-type property for HDMI connectorStanislav Lisovskiy
Added content_type property to drm_connector_state in order to properly handle external HDMI TV content-type setting. v2: * Moved helper function which attaches content type property to the drm core, as was suggested. Removed redundant connector state initialization. v3: * Removed caps in drm_content_type_enum_list. After some discussion it turned out that HDMI Spec 1.4 was wrongly assuming that IT Content(itc) bit doesn't affect Content type states, however itc bit needs to be manupulated as well. In order to not expose additional property for itc, for sake of simplicity it was decided to bind those together in same "content type" property. v4: * Added it_content checking in intel_digital_connector_atomic_check. Fixed documentation for new content type enum. v5: * Moved patch revision's description to commit messages. v6: * Minor naming fix for the content type enumeration string. v7: * Fix parameter name for documentation and parameter alignment in order not to get warning. Added Content Type description to new HDMI connector properties section. v8: * Thrown away unneeded numbers from HDMI content-type property description. Switch to strings desription instead of plain definitions. v9: * Moved away hdmi specific content-type enum from drm_connector_state. Content type property should probably not be bound to any specific connector interface in drm_connector_state. Same probably should be done to hdmi_picture_aspect_ration enum which is also contained in drm_connector_state. Added special helper function to get derive hdmi specific relevant infoframe fields. v10: * Added usage description to HDMI properties kernel doc. v11: * Created centralized function for filling HDMI AVI infoframe, based on correspondent DRM property value. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-2-stanislav.lisovskiy@intel.com [vsyrjala: clean up checkpatch multiple blank lines warnings] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2018-05-16Merge tag 'drm-intel-next-2018-05-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Last drm/i915 changes for v4.18: - NV12 enabling (Chandra, Maarten) - ICL workarounds (Oscar) - ICL basic DPLL enabling (Paulo) - GVT updates - DP link config refactoring (Jani) - Module parameter to override DMC firmware (Jani) - PSR updates (José, DK, Daniel, Ville) - ICL DP vswing programming (Manasi) - ICL DBuf slice updates (Mahesh) - Selftest fixes and updates (Chris, Matthew, Oscar) - Execlist fixes and updates (Chris) - Stolen memory first 4k fix (Hans de Goede) - wait_for fixes (Mika) - Tons of GEM improvements (Chris) - Plenty of other fixes and improvements (Everyone) - Crappy changelog (Me) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Mon 14 May 2018 11:04:24 PM AEST # gpg: using RSA key D398079D26ABEE6F # gpg: Good signature from "Jani Nikula <jani.nikula@intel.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 1565 A65B 77B0 632E 1124 E59C D398 079D 26AB EE6F # Conflicts: # drivers/gpu/drm/i915/intel_lrc.c # drivers/gpu/drm/i915/intel_sprite.c Link: https://patchwork.freedesktop.org/patch/msgid/87k1s51bvw.fsf@intel.com
2018-05-07drm/atomic: Clean private obj old_state/new_state in ↵Ville Syrjälä
drm_atomic_state_default_clear() Clear the old_state and new_state pointers for private objects in drm_atomic_state_default_clear(). We don't actually have functions to get the new/old state for private objects so getting access to the potentially stale pointers requires a bit more manual labour than for other object types. But let's clear the pointers for private objects as well, if only to avoid future surprises when someone decides to add the functions to get at them. v2: Split private objs to a separate patch (Daniel) Cc: <stable@vger.kernel.org> # v4.14+ Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Abhay Kumar <abhay.kumar@intel.com> Fixes: a4370c777406 (drm/atomic: Make private objs proper objects) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-05-07drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear()Ville Syrjälä
Clear the old_state and new_state pointers for every object in drm_atomic_state_default_clear(). Otherwise drm_atomic_get_{new,old}_*_state() will hand out stale pointers to anyone who hasn't first confirmed that the object is in fact part of the current atomic transcation, if they are called after we've done the ww backoff dance while hanging on to the same drm_atomic_state. For example, handle_conflicting_encoders() looks like it could hit this since it iterates the full connector list and just calls drm_atomic_get_new_connector_state() for each. And I believe we have now witnessed this happening at least once in i915 check_digital_port_conflicts(). Commit 8b69449d2663 ("drm/i915: Remove last references to drm_atomic_get_existing* macros") changed the safe drm_atomic_get_existing_connector_state() to the unsafe drm_atomic_get_new_connector_state(), which opened the doors for this particular bug there as well. v2: Split private objs out to a separate patch (Daniel) Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Abhay Kumar <abhay.kumar@intel.com> Fixes: 581e49fe6b41 ("drm/atomic: Add new iterators over all state, v3.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-05-03drm/atomic: Handling the case when setting old crtc for planeSatendra Singh Thakur
In the func drm_atomic_set_crtc_for_plane, with the current code, if crtc of the plane_state and crtc passed as argument to the func are same, entire func will executed in vein. It will get state of crtc and clear and set the bits in plane_mask. All these steps are not required for same old crtc. Ideally, we should do nothing in this case, this patch handles the same, and causes the program to return without doing anything in such scenario. Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com> Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1525326572-25854-1-git-send-email-satendra.t@samsung.com
2018-05-02Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Need d224985a5e31 ("sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new wait_var_event() API") in dinq to be able to fix https://bugs.freedesktop.org/show_bug.cgi?id=106085. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-04-24drm/atomic: Print debug message on atomic check failureLyude Paul
Does what it says on the label, it's a little confusing debugging atomic check failures otherwise. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180411234302.2896-2-lyude@redhat.com
2018-04-24drm/atomic: better doc for implicit vs explicit fencingDaniel Vetter
Note that a pile of drivers don't seem to take implicit fencing into account, or at least don't call drm_atoimc_set_fence_for_plane(). Cc'ing relevant people, or at least some. Some drivers also look like they don't disable implicit fencing (e.g. amdgpu) because the explicit fences and implicit fences are handled by entirely independent code paths. I also wonder whether we shouldn't just make the recommended helpers the default ones, since a lot of drivers don't bother to handle the implicit fences at all it seems. The helpers won't blow up even for non-GEM drivers or GEM drivers which don't fill out the gem bo pointers in struct drm_framebuffer. v2: Comments from Eric. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
2018-04-16drm/blend: Add a generic alpha propertyMaxime Ripard
Some drivers duplicate the logic to create a property to store a per-plane alpha. This is especially useful if we ever want to support extra protocols for Wayland like: https://lists.freedesktop.org/archives/wayland-devel/2017-August/034741.html Let's create a helper in order to move that to the core. Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e1ce0db78fcfc407e94913c64819e65109d034d.1523432341.git-series.maxime.ripard@bootlin.com
2018-03-16drm: Verify gamma/degamma LUT sizeVille Syrjälä
While we want to potentially support multiple different gamma/degamma LUT sizes we can (and should) at least check that the blob length is a multiple of the LUT entry size. v2: s/expected_size_mod/expected_elem_size/ (Daniel) Add kernel doc (Daniel) v3: s/we/were/ typo in the docs Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180315152241.7113-1-ville.syrjala@linux.intel.com
2018-03-16drm: Remove now pointelss blob->data castsVille Syrjälä
Now that blob->data is void* again we don't need the casts anymore. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180223192506.29992-2-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-03-02drm/atomic: Include color encoding/range in plane state dumpVille Syrjälä
Include color_enconding and color_range in the plane state dump. v2: Add kerneldoc (danvet) Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219202846.10628-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Harry Wentland <harry.wentland@amd.com>
2018-03-02drm: Add optional COLOR_ENCODING and COLOR_RANGE properties to drm_planeJyri Sarha
Add a standard optional properties to support different non RGB color encodings in DRM planes. COLOR_ENCODING select the supported non RGB color encoding, for instance ITU-R BT.709 YCbCr. COLOR_RANGE selects the value ranges within the selected color encoding. The properties are stored to drm_plane object to allow different set of supported encoding for different planes on the device. v2: Add/fix kerneldocs, verify bitmasks (danvet) Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Stone <daniel@fooishbar.org> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> [vsyrjala v2: Add/fix kerneldocs, verify bitmasks] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180219202823.10508-1-ville.syrjala@linux.intel.com Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-02-26drm: Check that the plane supports the request format+modifier comboVille Syrjälä
Currently we only check that the plane supports the pixel format of the fb we're about to feed to it. Extend it to check also the modifier, and more specifically that the combination of the format and modifier is supported. Cc: dri-devel@lists.freedesktop.org Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Stone <daniels@collabora.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171222192231.17981-8-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-02-16Merge tag 'topic/hdcp-2018-02-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Add HDCP support to i915 drm driver. * tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (26 commits) drm/i915: fix misalignment in HDCP register def drm/i915: Reauthenticate HDCP on failure drm/i915: Detect panel's hdcp capability drm/i915: Optimize HDCP key load drm/i915: Retry HDCP bksv read drm/i915: Connector info in HDCP debug msgs drm/i915: Stop encryption for repeater with no sink drm/i915: Handle failure from 2nd stage HDCP auth drm/i915: Downgrade hdcp logs from INFO to DEBUG_KMS drm/i915: Restore HDCP DRM_INFO when with no downstream drm/i915: Check for downstream topology errors drm/i915: Start repeater auth on READY/CP_IRQ drm/i915: II stage HDCP auth for repeater only drm/i915: Extending HDCP for HSW, BDW and BXT+ drm/i915/dp: Fix compilation of intel_dp_hdcp_check_link drm/i915: Only disable HDCP when it's active drm/i915: Don't allow HDCP on PORT E/F drm/i915: Implement HDCP for DisplayPort drm/i915: Implement HDCP for HDMI drm/i915: Add function to output Aksv over GMBUS ...
2018-01-30drm/atomic: Remove WARN_ON for invalid plane configuration.Maarten Lankhorst
Userspace can set a FB_ID on a plane without setting CRTC_ID, which will fail with -EINVAL, but the kernel shouldn't warn about that. Same for !FB_ID and CRTC_ID being set. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180130102704.28016-1-maarten.lankhorst@linux.intel.com Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2018-01-29drm/modes: Provide global mode_valid hookVille Syrjälä
Allow drivers to provide a device wide .mode_valid() hook in addition to the already existing crtc/encoder/bridge/connector hooks. This can be used to validate device/driver wide constraings without having to add those to the other hooks. And since we call this hook also for user modes later on in the modeset we don't have to worry about anything the hook has already rejected. I also have some further ideas for this hook. Eg. we could replace the drm_mode_set_crtcinfo(HALVE_V) call in drm_mode_convert_umode()/etc. with a driver specific variant via this hook. At least on i915 we would like to pass CRTC_STEREO_DOUBLE to that function instead, and then we could safely use the crtc_ timings in all our .mode_valid() hooks, which would allow us to reuse those hooks for validating the adjusted_mode during a modeset. v2: Fix the language fails in the kernel docs (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-10-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-01-08drm: Add Content Protection propertySean Paul
This patch adds a new optional connector property to allow userspace to enable protection over the content it is displaying. This will typically be implemented by the driver using HDCP. The property is a tri-state with the following values: - OFF: Self explanatory, no content protection - DESIRED: Userspace requests that the driver enable protection - ENABLED: Once the driver has authenticated the link, it sets this value The driver is responsible for downgrading ENABLED to DESIRED if the link becomes unprotected. The driver should also maintain the desiredness of protection across hotplug/dpms/suspend. If this looks familiar, I posted [1] this 3 years ago. We have been using this in ChromeOS across exynos, mediatek, and rockchip over that time. Changes in v2: - Pimp kerneldoc for content_protection_property (Daniel) - Drop sysfs attribute Changes in v3: - None Changes in v4: - Changed kerneldoc to recommend userspace polling (Daniel) - Changed kerneldoc to briefly describe how to attach the property (Daniel) Changes in v5: - checkpatch whitespace noise - Change DRM_MODE_CONTENT_PROTECTION_OFF to DRM_MODE_CONTENT_PROTECTION_UNDESIRED Changes in v6: - None Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> [1] https://lists.freedesktop.org/archives/dri-devel/2014-December/073336.html Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-4-seanpaul@chromium.org
2017-12-15drm/atomic: document how to handle driver private objectsDaniel Vetter
DK put some nice docs into the commit introducing driver private state, but in the git history alone it'll be lost. Also, since Ville remove the void* usage it's a good opportunity to give the driver private stuff some tlc on the doc front. Finally try to explain why the "let's just subclass drm_atomic_state" approach wasn't the greatest, and annotate all those functions as deprecated in favour of more standardized driver private states. Also note where we could/should extend driver private states going forward (atm neither locking nor synchronization is handled in core/helpers, which isn't really all that great). v2: Spelling and phrasing improvements (Alex, DK). Cc: Harry Wentland <harry.wentland@amd.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-5-daniel.vetter@ffwll.ch
2017-11-21Merge airlied/drm-next into drm-misc-nextDaniel Vetter
Bake in the conflict between the drm_print.h extraction and the addition of DRM_DEBUG_LEASES since we lost it a few too many times. Also fix a new use of drm_plane_helper_check_state in msm to follow Ville's conversion in commit a01cb8ba3f6282934cff65e89ab36b18b14cbe27 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Nov 1 22:16:19 2017 +0200 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-11-11drm/atomic: Use drm_framebuffer_print_info()Noralf Trønnes
Use drm_framebuffer_print_info() to print framebuffer info in drm_atomic_plane_print_state(). This will give optional GEM info as well. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-6-noralf@tronnes.org
2017-11-02drm: Print the fb dimensions when the src coord check failsVille Syrjälä
When debugging bad plane source coordinates it helps to have an idea of what the framebuffer dimensions are. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101183533.28466-1-ville.syrjala@linux.intel.com
2017-11-02drm: Spelling fixesLiviu Dudau
Minor spelling fix for 'monster' and replace 'on' with 'own' in comments. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171101140436.2743-1-Liviu.Dudau@arm.com
2017-10-21drm: Reorganize drm_pending_event to support future event types [v2]Keith Packard
Place drm_event_vblank in a new union that includes that and a bare drm_event structure. This will allow new members of that union to be added in the future without changing code related to the existing vbl event type. Assignments to the crtc_id field are now done when the event is allocated, rather than when delievered. This way, delivery doesn't need to have the crtc ID available. v2: * Remove 'dev' argument from create_vblank_event It wasn't being used anyways, and if we need it in the future, we can always get it from crtc->dev. * Check for MODESETTING before looking for crtc in queue_vblank_event UMS drivers will oops if we try to get a crtc, so make sure we're modesetting before we try to find a crtc_id to fill into the event. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com> (cherry picked from commit dc695b85fde88eca3ef3b03fcd82f15b6bc6e462)
2017-10-13Merge tag 'drm-misc-next-2017-10-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next More 4.15 drm-misc stuff: Cross-subsystem Changes: - bridge cleanup refactor (Benjamin Gaignard) Core Changes: - less surprising atomic iterators (Maarten), fixes an oops introduced in drm-next - better gem/fb helper docs (Noralf) - fix dma-buf rcu races (Christian König) Driver Changes: - adv7511: CEC support (Hans Verkuil) - sun4i update from Chen-Yu to improve hdmi and A31 support - sii8620: add remote control support (Maceiej Purski) New drivers: - SiI9234 bridge driver (Maciej Purski) - 7" rpi touch panel (Eric Anholt) Note that this contains a topic pull from regmap, needed by the sun4i changes. Mark Brown sent that out for pulling into drm-misc. * tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc: (29 commits) drm/dp: WARN about invalid/unknown link rates and bw codes drm/msm/mdp5: remove less than 0 comparison for unsigned value drm/bridge/sii8620: add remote control support drm/sun4i: hdmi: Add support for A31's HDMI controller drm/sun4i: hdmi: Add A31 specific DDC register definitions drm/sun4i: hdmi: Add support for controller hardware variants dt-bindings: display: sun4i: Add binding for A31 HDMI controller drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent drm/sun4i: hdmi: create a regmap for later use drm/sun4i: hdmi: Disable clks in bind function error path and unbind function drm/sun4i: tcon: Add support for demuxing TCON output on A31 drm/sun4i: tcon: Add variant callback for TCON output muxing drm/bridge/synopsys: dsi :remove is_panel_bridge drm/vc4: remove bridge from driver internal structure drm/stm: ltdc: remove bridge from driver internal structure drm/drm_of: add drm_of_panel_bridge_remove function drm/bridge: make drm_panel_bridge_remove more robust dma-fence: fix dma_fence_get_rcu_safe v2 dma-buf: make reservation_object_copy_fences rcu save drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume() ...
2017-10-12drm: Pass struct drm_file * to __drm_mode_object_find [v2]Keith Packard
This will allow __drm_mode_object_file to be extended to perform access control checks based on the file in use. v2: Also fix up vboxvideo driver in staging [airlied: merging early as this is an API change] Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-10-06drm/atomic: Remove unneeded null check for private objectsMaarten Lankhorst
It can be seen in drm_atomic_get_private_obj_state() that ptr will never be NULL, so skip the check for that case. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170927083532.5756-1-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-09-28Merge tag 'drm-misc-next-2017-09-20' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next UAPI Changes: Cross-subsystem Changes: Core Changes: - DP SDP defines (Ville) - polish for scdc helpers (Thierry Reding) - fix lifetimes for connector/plane state across crtc changes (Maarten Lankhorst). - sparse fixes (Ville+Thierry) - make legacy kms ioctls all interruptible (Maarten) - push edid override into the edid helpers (out of probe helpers) (Jani) - DP ESI defines for link status (DK) Driver Changes: - drm-panel is now in drm-misc! - minor panel-simple cleanups/refactoring by various folks - drm_bridge_add cleanup (Inki Dae) - constify a few i2c_device_id structs (Arvind Yadav) - More patches from Noralf's fb/gem helper cleanup - bridge/synopsis: reset fix (Philippe Cornu) - fix tracepoint include handling in drivers (Thierry) - rockchip: lvds support (Sandy Huang) - move sun4i into drm-misc fold (Maxime Ripard) - sun4i: refactor driver load + support TCON backend/layer muxing (Chen-Yu Tsai) - pl111: support more pl11x variants (Linus Walleij) - bridge/adv7511: robustify probing/edid handling (Lars-Petersen Clausen) New hw support: - S6E63J0X03 panel (Hoegeun Kwon) - OTM8009A panel (Philippe CORNU) - Seiko 43WVF1G panel (Marco Franchi) - tve200 driver (Linus Walleij) Plus assorted of tiny patches all over, including our first outreachy patches from applicants for the winter round! * tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits) drm: add backwards compatibility support for drm_kms_helper.edid_firmware drm: handle override and firmware EDID at drm_do_get_edid() level drm/dp: DPCD register defines for link status within ESI field drm/rockchip: Replace dev_* with DRM_DEV_* drm/tinydrm: Drop driver registered message drm/gem-fb-helper: Use debug message on gem lookup failure drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb() drm/bridge: adv7511: Constify HDMI CODEC platform data drm/bridge: adv7511: Enable connector polling when no interrupt is specified drm/bridge: adv7511: Remove private copy of the EDID drm/bridge: adv7511: Properly update EDID when no EDID was found drm/crtc: Convert setcrtc ioctl locking to interruptible. drm/atomic: Convert pageflip ioctl locking to interruptible. drm/legacy: Convert setplane ioctl locking to interruptible. drm/legacy: Convert cursor ioctl locking to interruptible. drm/atomic: Convert atomic ioctl locking to interruptible. drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2. drm/tve200: Clean up panel bridging drm/doc: Update todo.rst drm/dp/mst: Sideband message transaction to power up/down nodes ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 14:34:27 +0000