summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge
AgeCommit message (Collapse)Author
2020-05-18drm/bridge: ti-sn65dsi86: Clear old error bits before AUX transfersDouglas Anderson
The AUX channel transfer error bits in the status register are latched and need to be cleared. Clear them before doing our transfer so we don't see old bits and get confused. Without this patch having a single failure would mean that all future transfers would look like they failed. Fixes: b814ec6d4535 ("drm/bridge: ti-sn65dsi86: Implement AUX channel") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200508163314.1.Idfa69d5d3fc9623083c0ff78572fea87dccb199c@changeid
2020-05-18drm/bridge: ti-sn65dsi86: Export bridge GPIOs to LinuxDouglas Anderson
The ti-sn65dsi86 MIPI DSI to eDP bridge chip has 4 pins on it that can be used as GPIOs in a system. Each pin can be configured as input, output, or a special function for the bridge chip. These are: - GPIO1: SUSPEND Input - GPIO2: DSIA VSYNC - GPIO3: DSIA HSYNC or VSYNC - GPIO4: PWM Let's expose these pins as GPIOs. A few notes: - Access to ti-sn65dsi86 is via i2c so we set "can_sleep". - These pins can't be configured for IRQ. - There are no programmable pulls or other fancy features. - Keeping the bridge chip powered might be expensive. The driver is setup such that if all used GPIOs are only inputs we'll power the bridge chip on just long enough to read the GPIO and then power it off again. Setting a GPIO as output will keep the bridge powered. - If someone releases a GPIO we'll implicitly switch it to an input so we no longer need to keep the bridge powered for it. Because of all of the above limitations we just need to implement a bare-bones GPIO driver. The device tree bindings already account for this device being a GPIO controller so we only need the driver changes for it. NOTE: Despite the fact that these pins are nominally muxable I don't believe it makes sense to expose them through the pinctrl interface as well as the GPIO interface. The special functions are things that the bridge chip driver itself would care about and it can just configure the pins as needed. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> [added pdata->gchip.base = -1;] Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200507143354.v5.1.Ia50267a5549392af8b37e67092ca653a59c95886@changeid
2020-05-05drm/bridge: chrontel-ch7033: Add a new driverLubomir Rintel
This is a driver for video encoder with VGA and DVI/HDMI outputs. There is no documentation for the chip -- the operation was guessed from what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names come from the ch7035 driver in Mediatek's GPL code dump. Only bare minimum is implemented -- no fancy stuff, such as scaling. That would only worsen our misery. We don't load the firmware and we don't need to even bother enabling the MCU. There are probably no distributable firmware images anyway. Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, with VGA as well as DVI. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-4-lkundrak@v3.sk
2020-04-29drm/bridge: fix stack usage warning on old gccArnd Bergmann
Some older versions of gcc badly optimize code that passes an inline function argument into another function by reference, causing huge stack usage: drivers/gpu/drm/bridge/tc358768.c: In function 'tc358768_bridge_pre_enable': drivers/gpu/drm/bridge/tc358768.c:840:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Use a temporary variable as a workaround and add a comment pointing to the gcc bug. Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200428215408.4111675-1-arnd@arndb.de
2020-04-25drm/bridge: panel: Return always an error pointer in drm_panel_bridge_add()Enric Balletbo i Serra
Since commit 89958b7cd955 ("drm/bridge: panel: Infer connector type from panel by default"), drm_panel_bridge_add() and their variants can return NULL and an error pointer. This is fine but none of the actual users of the API are checking for the NULL value. Instead of change all the users, seems reasonable to return an error pointer instead. So change the returned value for those functions when the connector type is unknown. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200416210654.2468805-1-enric.balletbo@collabora.com
2020-04-25drm/bridge: ps8640: Let panel to set the connector typeEnric Balletbo i Serra
The panel connector type should be set by the panel not the bridge, so remove the connector_type assignment. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200416164404.2418426-2-enric.balletbo@collabora.com
2020-04-21Update rmk's email address in various driversRussell King
Globally update my email address in six files scattered through the tree. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-04-21drm: Fix misspellings of "Analog Devices"Geert Uytterhoeven
According to https://www.analog.com/, the company name is spelled "Analog Devices". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200416103058.15269-4-geert+renesas@glider.be
2020-04-17Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging required to pull topic/phy-compliance. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2020-04-14drm/bridge: anx6345: set correct BPC for display_info of connectorVasily Khoruzhick
Some drivers (e.g. sun4i-drm) need this info to decide whether they need to enable dithering. Currently driver reports what panel supports and if panel supports 8 we don't get dithering enabled. Hardcode BPC to 6 for now since that's the only BPC that driver supports. Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support") Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200329222253.2941405-1-anarsoul@gmail.com
2020-04-14drm: bridge: adv7511: Extend list of audio sample ratesBogdan Togorean
ADV7511 support sample rates up to 192kHz. CTS and N parameters should be computed accordingly so this commit extend the list up to maximum supported sample rate. Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-2-bogdan.togorean@analog.com
2020-04-14drm: bridge: adv7511: Enable SPDIF DAIBogdan Togorean
ADV7511 support I2S or SPDIF as audio input interfaces. This commit enable support for SPDIF. Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-1-bogdan.togorean@analog.com
2020-04-09drm/bridge: Add NWL MIPI DSI host controller supportGuido Günther
This adds initial support for the NWL MIPI DSI Host controller found on i.MX8 SoCs. It adds support for the i.MX8MQ but the same IP can be found on e.g. the i.MX8QXP. It has been tested on the Librem 5 devkit using mxsfb. Signed-off-by: Guido Günther <agx@sigxcpu.org> Co-developed-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Tested-by: Robert Chiras <robert.chiras@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1cf5750f734e33d005564cd89c576eaf3c1c192b.1586427783.git.agx@sigxcpu.org
2020-04-09drm/bridge: analogix_dp: Split bind() into probe() and real bind()Marek Szyprowski
Analogix_dp driver acquires all its resources in the ->bind() callback, what is a bit against the component driver based approach, where the driver initialization is split into a probe(), where all resources are gathered, and a bind(), where all objects are created and a compound driver is initialized. Extract all the resource related operations to analogix_dp_probe() and analogix_dp_remove(), then call them before/after registration of the device components from the main Exynos DP and Rockchip DP drivers. Also move the plat_data initialization to the probe() to make it available for the analogix_dp_probe() function. This fixes the multiple calls to the bind() of the DRM compound driver when the DP PHY driver is not yet loaded/probed: [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm]) exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm]) exynos-dp 145b0000.dp-controller: no DP phy configured exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517 exynos-drm exynos-drm: master bind failed: -517 ... [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm]) exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm]) [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). Console: switching to colour frame buffer device 170x48 exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1 ... Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com (cherry picked from commit 83a196773b8bc6702f49df1eddc848180e350340) Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-04-05drm/bridge: fix kernel-doc warning in panel.cSam Ravnborg
Add missing documentation to fix following warning: panel.c:303: warning: Function parameter or member 'bridge' not described in 'drm_panel_bridge_connector' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Mihail Atanassov <Mihail.Atanassov@arm.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200328132025.19910-7-sam@ravnborg.org
2020-03-31Merge v5.6 into drm-nextDave Airlie
msm needed rc6, so I just went and merged release (msm has been in drm-next outside of this tree) Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-03-27drm/bridge: sii9234: silence warning about regulators during deferred probeMarek Szyprowski
Don't confuse user with meaningless warning about failure in getting regulators in case of deferred probe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226101307.16708-1-m.szyprowski@samsung.com
2020-03-24drm/bridge: dw-hdmi: rework csc related functionsJernej Skrabec
is_color_space_conversion() is a misnomer. It checks not only if color space conversion is needed, but also if format conversion is needed. This is actually desired behaviour because result of this function determines if CSC block should be enabled or not (CSC block can also do format conversion). In order to clear misunderstandings, let's rework is_color_space_conversion() to do exactly what is supposed to do and add another function which will determine if CSC block must be enabled or not. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-5-jernej.skrabec@siol.net
2020-03-24drm/bridge: dw-hdmi: Add support for RGB limited rangeJernej Skrabec
CEA 861 standard requestis that RGB quantization range is "limited" for CEA modes. Support that by adding CSC matrix which downscales values. This allows proper color reproduction on TV and PC monitor at the same time. In future, override property can be added, like "Broadcast RGB" in i915 driver. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-4-jernej.skrabec@siol.net
2020-03-24drm/bridge: dw-hdmi: do not force "none" scan modeJonas Karlman
Setting scan mode to "none" confuses some TVs like LG B8, which randomly change overscan percentage over time. Digital outputs like HDMI and DVI, handled by this controller, don't really need overscan, so we can always set scan mode to underscan. Actually, this is exactly what drm_hdmi_avi_infoframe_from_display_mode() already does, so we can just remove offending line. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> [updated commit message] Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-3-jernej.skrabec@siol.net
2020-03-19Merge tag 'drm-misc-next-2020-03-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.7: UAPI Changes: Cross-subsystem Changes: Core Changes: - dp-mst: Remove register_connector callback, add drm_dp_destroy_connector - Changes to scnprintf on multiple instances Driver Changes: - meson: Support for YUV420 - panel: Support Ortustech COM37H3M, idk-1110wr and idk-2121wr, multiple dotclock fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200317082858.lubmvlmvoprn2tuh@gilmour.lan
2020-03-17Merge drm/drm-next into drm-misc-nextMaxime Ripard
Jernej needs some patches that got merged in -rc5. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-03-12Merge tag 'drm-misc-next-2020-03-09' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.7: UAPI Changes: Cross-subsystem Changes: Core Changes: Driver Changes: - fb-helper: Remove drm_fb_helper_{add,add_all,remove}_one_connector - fbdev: some cleanups and dead-code removal - Conversions to simple-encoder - zero-length array removal - Panel: panel-dpi support in panel-simple, Novatek NT35510, Elida KD35T133, Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200309135439.dicfnbo4ikj4tkz7@gilmour
2020-03-11Merge v5.6-rc5 into drm-nextDave Airlie
Requested my mripard for some misc patches that need this as a base. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-03-10drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200aNeil Armstrong
Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support for these modes in the connector if the platform supports them. We limit these modes to DW-HDMI IP version >= 0x200a which are designed to support HDMI2.0 display modes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-6-narmstrong@baylibre.com
2020-03-10drm/bridge: synopsys: dw-hdmi: add bus format negociationNeil Armstrong
Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negociate the possible output and input formats for the current mode and monitor, and use the negotiated formats in a basic atomic_check callback. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-5-narmstrong@baylibre.com
2020-03-10drm/bridge: dw-hdmi: Plug atomic state hooks to the default implementationNeil Armstrong
Add atomic_duplicate_state/atomic_destroy_state/atomic_reset bridge funcs to allow setup of atomic bridge state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-4-narmstrong@baylibre.com
2020-03-10drm/bridge: dw-hdmi: add max bpc connector propertyJonas Karlman
Add the max_bpc property to the dw-hdmi connector to prepare support for 10, 12 & 16bit output support. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-3-narmstrong@baylibre.com
2020-03-10drm/bridge: dw-hdmi: set mtmdsclock for deep colorJonas Karlman
Configure the correct mtmdsclock for deep colors to prepare support for 10, 12 & 16bit output. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-2-narmstrong@baylibre.com
2020-03-06drm: Remove drm_fb_helper add, add all and remove connector callsPankaj Bharadiya
drm_fb_helper_{add,remove}_one_connector() and drm_fb_helper_single_add_all_connectors() are dummy functions now and serve no purpose. Hence remove their calls. This is the preparatory step for removing the drm_fb_helper_{add,remove}_one_connector() functions from drm_fb_helper.h This removal is done using below sementic patch and unused variable compilation warnings are fixed manually. @@ @@ - drm_fb_helper_single_add_all_connectors(...); @@ expression e1; statement S; @@ - e1 = drm_fb_helper_single_add_all_connectors(...); - S @@ @@ - drm_fb_helper_add_one_connector(...); @@ @@ - drm_fb_helper_remove_one_connector(...); Changes since v1: * Squashed warning fixes into the patch that introduced the warnings (into 5/7) (Laurent, Emil, Lyude) Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-6-pankaj.laxminarayan.bharadiya@intel.com
2020-03-05drm/bridge: dw-hdmi: fix AVI frame colorimetryJernej Skrabec
CTA-861-F explicitly states that for RGB colorspace colorimetry should be set to "none". Fix that. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net
2020-02-27drm/bridge: anx6345: don't print error message if regulator is not readyVasily Khoruzhick
We don't want to print scary message if devm_regulator_get() returns -EPROBE_DEFER Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200226081011.1347245-3-anarsoul@gmail.com
2020-02-27drm/bridge: analogix-anx6345: fix set of link bandwidthIcenowy Zheng
Current code tries to store the link rate (in bps, which is a big number) in a u8, which surely overflow. Then it's converted back to bandwidth code (which is thus 0) and written to the chip. The code sometimes works because the chip will automatically fallback to the lowest possible DP link rate (1.62Gbps) when get the invalid value. However, on the eDP panel of Olimex TERES-I, which wants 2.7Gbps link, it failed. As we had already read the link bandwidth as bandwidth code in earlier code (to check whether it is supported), use it when setting bandwidth, instead of converting it to link rate and then converting back. Fixes: e1cff82c1097 ("drm/bridge: fix anx6345 compilation for v5.5") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Torsten Duwe <duwe@suse.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Torsten Duwe <duwe@lst.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200221165127.813325-1-icenowy@aosc.io
2020-02-26drm/bridge: tfp410: Allow operation without drm_connectorLaurent Pinchart
The tfp410 driver can operate as part of a pipeline where the drm_connector is created by the display controller. Enable this mode of operation by skipping creation of a drm_connector internally. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-20-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: tfp410: Replace manual connector handling with bridgeLaurent Pinchart
Now that a driver is available for display connectors, replace the manual connector handling code with usage of the DRM bridge API. The tfp410 driver doesn't deal with the display connector directly anymore, but still delegates drm_connector operations to the next bridge. This brings us one step closer to having the tfp410 driver handling the TFP410 only. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-19-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: panel: Implement bridge connector operationsLaurent Pinchart
Implement the newly added bridge connector operations, allowing the usage of drm_bridge_panel with drm_bridge_connector. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-18-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: Add driver for the TI TPD12S015 HDMI level shifterLaurent Pinchart
The TI TPD12S015 is an HDMI level shifter and ESD protector controlled through GPIOs. Add a DRM bridge driver for the device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-17-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: Add bridge driver for display connectorsLaurent Pinchart
Display connectors are modelled in DT as a device node, but have so far been handled manually in several bridge drivers. This resulted in duplicate code in several bridge drivers, with slightly different (and thus confusing) logics. In order to fix this, implement a bridge driver for display connectors. The driver centralises logic for the DVI, HDMI, VGAn composite and S-video connectors and exposes corresponding bridge operations. This driver in itself doesn't solve the issue completely, changes in bridge and display controller drivers are needed to make use of the new connector driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-16-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: simple-bridge: Add support for the TI OPA362Laurent Pinchart
The TI OPA362 is an analog video amplifier controlled through a GPIO. Add support for it to the simple-bridge driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-15-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: simple-bridge: Add support for enable GPIOLaurent Pinchart
If an enable GPIO is declared in the firmware, assert it when enabling the bridge and deassert it when disabling it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-14-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: simple-bridge: Add support for non-VGA bridgesLaurent Pinchart
Create a new simple_bridge_info structure that stores information about the bridge model, and store the bridge timings in there, along with the connector type. Use that new structure for of_device_id data. This enables support for non-VGA bridges. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-13-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: dumb-vga-dac: Rename driver to simple-bridgeLaurent Pinchart
The dumb-vga-dac driver can support simple DRM bridges without being limited to VGA DACs. Rename it to simple-bridge. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: dumb-vga-dac: Rename internal symbols to simple-bridgeLaurent Pinchart
The dumb-vga-dac driver is a simple DRM bridge driver for simple VGA DACs that don't require configuration. Other non-VGA bridges fall in a similar category, and would benefit from a common driver. Prepare for this by renaming the internal symbols from dumb-vga-dac to simple-bridge. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-11-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: Extend bridge API to disable connector creationLaurent Pinchart
Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
2020-02-25drm/bridge: panel: Propagate bus format/flagsBoris Brezillon
Propagate bus format/flags so that the previous bridge element in the chain knows which input format the panel bridge expects. v11: * Fix a typo in the subject * Update the commit message so it's readable by itself v10: * Add changelog to the commit message v8 -> v9: * No changes v7: * Set atomic state hooks explicitly v4 -> v6: * Not part of the series v3: * Adjust things to match the new bus-format negotiation approach * Use drm_atomic_helper_bridge_propagate_bus_fmt * Don't implement ->atomic_check() (the core now takes care of bus flags propagation) v2: * Adjust things to match the new bus-format negotiation approach Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-11-boris.brezillon@collabora.com
2020-02-25drm/bridge: lvds-codec: Constify the drm_bridge_funcs structureLaurent Pinchart
The drm_bridge_funcs structure is never modified, make it const. Making it read-only can improve security as the structure contains function pointers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200224230056.2157-1-laurent.pinchart+renesas@ideasonboard.com
2020-02-25drm/bridge: lvds-codec: Add to_lvds_codec() functionLaurent Pinchart
Factor out the manual container_of() uses to a common to_lvds_codec() macro to shorten lines (and provide better type safety, although that won't matter much in this case). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200224225645.28060-1-laurent.pinchart+renesas@ideasonboard.com
2020-02-21drm/bridge: analogix-anx6345: Avoid duplicate -supply suffixTorsten Duwe
of_get_regulator() will unconditionally add "-supply" to form the property name. This is documented in commit 69511a452e6dc ("map consumer regulator based on device tree"). Remove the suffix from the requests. Signed-off-by: Torsten Duwe <duwe@lst.de> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200218155440.BEFB968C65@verein.lst.de
2020-02-21drm/bridge: analogix-anx78xx: Fix drm_dp_link helper removalTorsten Duwe
drm_dp_link_rate_to_bw_code and ...bw_code_to_link_rate simply divide by and multiply with 27000, respectively. Avoid an overflow in the u8 dpcd[0] and the multiply+divide alltogether. Signed-off-by: Torsten Duwe <duwe@lst.de> Fixes: ff1e8fb68ea0 ("drm/bridge: analogix-anx78xx: Avoid drm_dp_link helpers") Cc: Thierry Reding <treding@nvidia.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200218155744.9675368BE1@verein.lst.de
2020-02-13drm/bridge: ti-sn65dsi86: Avoid invalid ratesDouglas Anderson
Based on work by Bjorn Andersson <bjorn.andersson@linaro.org>, Jeffrey Hugo <jeffrey.l.hugo@gmail.com>, and Rob Clark <robdclark@chromium.org>. Let's read the SUPPORTED_LINK_RATES and/or MAX_LINK_RATE (depending on the eDP version of the sink) to figure out what eDP rates are supported and pick the ideal one. NOTE: I have only personally tested this code on eDP panels that are 1.3 or older. Code reading SUPPORTED_LINK_RATES for DP 1.4+ was tested by hacking the code to pretend that a table was there. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218143416.v3.9.Ib59207b66db377380d13748752d6fce5596462c5@changeid
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 00:43:02 +0000