summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge/Kconfig
AgeCommit message (Collapse)Author
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-05drm/bridge: chrontel-ch7033: Add a new driverLubomir Rintel
This is a driver for video encoder with VGA and DVI/HDMI outputs. There is no documentation for the chip -- the operation was guessed from what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names come from the ch7035 driver in Mediatek's GPL code dump. Only bare minimum is implemented -- no fancy stuff, such as scaling. That would only worsen our misery. We don't load the firmware and we don't need to even bother enabling the MCU. There are probably no distributable firmware images anyway. Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, with VGA as well as DVI. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-4-lkundrak@v3.sk
2020-04-09drm/bridge: Add NWL MIPI DSI host controller supportGuido Günther
This adds initial support for the NWL MIPI DSI Host controller found on i.MX8 SoCs. It adds support for the i.MX8MQ but the same IP can be found on e.g. the i.MX8QXP. It has been tested on the Librem 5 devkit using mxsfb. Signed-off-by: Guido Günther <agx@sigxcpu.org> Co-developed-by: Robert Chiras <robert.chiras@nxp.com> Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Tested-by: Robert Chiras <robert.chiras@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1cf5750f734e33d005564cd89c576eaf3c1c192b.1586427783.git.agx@sigxcpu.org
2020-02-26drm/bridge: Add driver for the TI TPD12S015 HDMI level shifterLaurent Pinchart
The TI TPD12S015 is an HDMI level shifter and ESD protector controlled through GPIOs. Add a DRM bridge driver for the device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-17-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: Add bridge driver for display connectorsLaurent Pinchart
Display connectors are modelled in DT as a device node, but have so far been handled manually in several bridge drivers. This resulted in duplicate code in several bridge drivers, with slightly different (and thus confusing) logics. In order to fix this, implement a bridge driver for display connectors. The driver centralises logic for the DVI, HDMI, VGAn composite and S-video connectors and exposes corresponding bridge operations. This driver in itself doesn't solve the issue completely, changes in bridge and display controller drivers are needed to make use of the new connector driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-16-laurent.pinchart@ideasonboard.com
2020-02-26drm/bridge: dumb-vga-dac: Rename driver to simple-bridgeLaurent Pinchart
The dumb-vga-dac driver can support simple DRM bridges without being limited to VGA DACs. Rename it to simple-bridge. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com
2020-02-10drm/bridge: sii902x: Select SND_SOC_HDMI_CODEC if SND_SOC is configuredJyri Sarha
To enable HDMI audio the SND_SOC_HDMI_CODEC needs to be configured. Enable HDMI audio by selecting SND_SOC_HDMI_CODEC if SND_SOC is configured. SND_SOC_HDMI_CODEC has no config menu entry and should be selected automatically by the drivers using it. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [narmstrong: atomatically -> automatically] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191129152342.29145-1-jsarha@ti.com
2020-02-10drm/bridge: Add tc358768 driverPeter Ujfalusi
Add basic support for the Toshiba TC358768 RGB to DSI bridge. Not all the features of the TC358768 is implemented by the initial driver: MIPI_DSI_MODE_VIDEO and MIPI_DSI_FMT_RGB888 is only supported and tested. Only write is implemented for mipi_dsi_host_ops.transfer. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200131111553.472-3-peter.ujfalusi@ti.com
2020-01-22drm/bridge: Add I2C based driver for ps8640 bridgeJitao Shi
This patch adds drm_bridge driver for parade DSI to eDP bridge chip. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> [uli: followed API changes, removed FW update feature] Signed-off-by: Ulrich Hecht <uli@fpond.eu> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191230090419.137141-3-enric.balletbo@collabora.com
2019-12-18drm/bridge: Repurpose lvds-encoder.cFabrizio Castro
lvds-encoder.c implementation is also suitable for LVDS decoders, not just LVDS encoders. Instead of creating a new driver for addressing support for transparent LVDS decoders, repurpose lvds-encoder.c for the greater good with this patch. This patch only "rebrands" the lvds-encoder.c driver, to make it suitable for hosting LVDS decoders support. The actual support for LVDS decoders will come with a later patch. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1573660292-10629-6-git-send-email-fabrizio.castro@bp.renesas.com
2019-11-20drm/bridge: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191120133634.11601-1-krzk@kernel.org
2019-11-08drm/bridge: move ANA78xx driver to analogix subdirectoryIcenowy Zheng
As ANA78xx chips are designed and produced by Analogix Semiconductor, Inc, move their driver codes into analogix subdirectory. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Torsten Duwe <duwe@suse.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de
2019-10-10drm/bridge: sil_sii8620: make remote control optional.Ronald Tschalär
commit d6abe6df706c ("drm/bridge: sil_sii8620: do not have a dependency of RC_CORE") changed the driver to select both RC_CORE and INPUT. However, this causes problems with other drivers, in particular an input driver that depends on MFD_INTEL_LPSS_PCI (to be added in a separate commit): drivers/clk/Kconfig:9:error: recursive dependency detected! drivers/clk/Kconfig:9: symbol COMMON_CLK is selected by MFD_INTEL_LPSS drivers/mfd/Kconfig:566: symbol MFD_INTEL_LPSS is selected by MFD_INTEL_LPSS_PCI drivers/mfd/Kconfig:580: symbol MFD_INTEL_LPSS_PCI is implied by KEYBOARD_APPLESPI drivers/input/keyboard/Kconfig:73: symbol KEYBOARD_APPLESPI depends on INPUT drivers/input/Kconfig:8: symbol INPUT is selected by DRM_SIL_SII8620 drivers/gpu/drm/bridge/Kconfig:83: symbol DRM_SIL_SII8620 depends on DRM_BRIDGE drivers/gpu/drm/bridge/Kconfig:1: symbol DRM_BRIDGE is selected by DRM_PL111 drivers/gpu/drm/pl111/Kconfig:1: symbol DRM_PL111 depends on COMMON_CLK According to the docs and general consensus, select should only be used for non user-visible symbols, but both RC_CORE and INPUT are user-visible. Furthermore almost all other references to INPUT throughout the kernel config are depends, not selects. For this reason the first part of this change reverts the commit. In order to address the original reason for the commit, namely that not all boards use the remote controller functionality and hence should not need have to deal with RC_CORE, the second part of this change now makes the remote control support in the driver optional and contingent on RC_CORE being defined. And with this the hard dependency on INPUT also goes away as that is only needed if RC_CORE is defined (which in turn already depends on INPUT). CC: Inki Dae <inki.dae@samsung.com> CC: Andrzej Hajda <a.hajda@samsung.com> CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> [a.hajda: applied fixup provided by Arnd Bergmann] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419081926.13567-2-ronald@innovation.ch
2019-08-09Merge tag 'drm-misc-next-2019-08-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.4: UAPI Changes: - HDCP: Add a Content protection type property Cross-subsystem Changes: Core Changes: - Continue to rework the include dependencies - fb: Remove the unused drm_gem_fbdev_fb_create function - drm-dp-helper: Make the link rate calculation more tolerant to non-explicitly defined, yet supported, rates - fb-helper: Map DRM client buffer only when required, and instanciate a shadow buffer when the device has a dirty function or says so - connector: Add a helper to link the DDC adapter used by that connector to the userspace - vblank: Switch from DRM_WAIT_ON to wait_event_interruptible_timeout - dma-buf: Fix a stack corruption - ttm: Embed a drm_gem_object struct to make ttm_buffer_object a superclass of GEM, and convert drivers to use it. - hdcp: Improvements to report the content protection type to the userspace Driver Changes: - Remove drm_gem_prime_import/export from being defined in the drivers - Drop DRM_AUTH usage from drivers - Continue to drop drmP.h - Convert drivers to the connector ddc helper - ingenic: Add support for more panel-related cases - komeda: Support for dual-link - lima: Reduce logging - mpag200: Fix the cursor support - panfrost: Export GPU features register to userspace through an ioctl - pl111: Remove the CLD pads wiring support from the DT - rockchip: Rework to use DRM PSR helpers, fix a bug in the VOP_WIN_GET macro - sun4i: Improve support for color encoding and range - tinydrm: Rework SPI support, improve MIPI-DBI support, move to drm/tiny - vkms: Rework of the CRC tracking - bridges: - sii902x: Add support for audio graph card - tc358767: Rework AUX data handling code - ti-sn65dsi86: Add Debugfs and proper DSI mode flags support - panels - Support for GiantPlus GPM940B0, Sharp LQ070Y3DG3B, Ortustech COM37H3M, Novatek NT39016, Sharp LS020B1DD01D, Raydium RM67191, Boe Himax8279d, Sharp LD-D5116Z01B - Conversion of the device tree bindings to the YAML description - jh057n00900: Rework the enable / disable path - fbdev: - ssd1307fb: Support more devices based on that controller Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190808121423.xzpedzkpyecvsiy4@flea
2019-07-30drm/bridge: tc358764: Fix build errorYueHaibing
If CONFIG_DRM_TOSHIBA_TC358764=y but CONFIG_DRM_KMS_HELPER=m, building fails: drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x228): undefined reference to `drm_atomic_helper_connector_reset' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x240): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x268): undefined reference to `drm_atomic_helper_connector_duplicate_state' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x270): undefined reference to `drm_atomic_helper_connector_destroy_state' Like TC358767, select DRM_KMS_HELPER to fix this, and change to select DRM_PANEL to avoid recursive dependency. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729090520.25968-1-yuehaibing@huawei.com
2019-07-30drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=mYueHaibing
If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m, build fails: drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe': lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: dbb58bfd9ae6 ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com
2019-07-22drm/bridge: Improve the help text for DRM_ANALOGIX_ANX78XXFabio Estevam
Improve the help text for DRM_ANALOGIX_ANX78XX by adding the missing "power" word. After this change the help text matches with the ANX7814 product description from the Analogix website: https://www.analogix.com/en/products/convertersbridges/anx7814 Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190722194049.20761-1-festevam@gmail.com
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-03video: backlight: Remove useless BACKLIGHT_LCD_SUPPORT kernel symbolAlexander Shiyan
We have two *_CLASS_DEVICE kernel config options (LCD_CLASS_DEVICE and BACKLIGHT_LCD_DEVICE) that do the same job. The patch removes useless BACKLIGHT_LCD_SUPPORT option and converts LCD_CLASS_DEVICE into a menu. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-02-07drm/bridge: cdns: Convert to phy frameworkMaxime Ripard
Now that we have everything we need in the phy framework to allow to tune the phy parameters, let's convert the Cadence DSI bridge to that API instead of creating a ad-hoc driver for its phy. Acked-by: Sean Paul <sean@poorly.run> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/8772ad061f07cd91fa48bb05880095b25eccec08.1548085432.git-series.maxime.ripard@bootlin.com
2018-11-20drm/bridge/sii902x: Add missing dependency on I2C_MUXFabrizio Castro
kbuild test robot reports: >> ERROR: "i2c_mux_add_adapter" [drivers/gpu/drm/bridge/sii902x.ko] undefined! >> ERROR: "i2c_mux_alloc" [drivers/gpu/drm/bridge/sii902x.ko] undefined! >> ERROR: "i2c_mux_del_adapters" [drivers/gpu/drm/bridge/sii902x.ko] undefined! Quite obviously the driver depends on I2C_MUX, but adding a "depends on" introduces a recursive dependency, therefore this patch selects I2C_MUX instead. Fixes: 21d808405fe4 ("drm/bridge/sii902x: Fix EDID readback") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Link: https://lists.01.org/pipermail/kbuild-all/2018-November/054924.html Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/1542633978-22064-1-git-send-email-fabrizio.castro@bp.renesas.com
2018-08-16drm/bridge: ti-sn65dsi86: Fix 0-day build errorGuenter Roeck
0day reports: >> drivers/gpu/drm/bridge/ti-sn65dsi86.o: In function mipi_dsi_detach' >> drivers/gpu/drm/bridge/ti-sn65dsi86.c:630: undefined reference to ti_sn_bridge_attach': >> drivers/gpu/drm/bridge/ti-sn65dsi86.c:249: undefined reference to mipi_dsi_device_register_full' >> drivers/gpu/drm/bridge/ti-sn65dsi86.c:276: undefined reference to mipi_dsi_device_unregister' Quite obviously the driver depends on DRM_MIPI_DSI. We can not use depends since the driver configuration uses select, so we'll have to select the missing dependency instead. Cc: Sean Paul <seanpaul@chromium.org> Cc: Dylan Reid <dgreid@chromium.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180815194923.3258-1-sean@poorly.run
2018-07-27drm/bridge: tc358764: Add DSI to LVDS bridge driverAndrzej Hajda
Add a drm_bridge driver for the Toshiba TC358764 DSI to LVDS bridge. Changes in v4: - removed license blob, - ordered includes, - added error handling, - fixed reset GPIO handling, - added missing calls to the panel, - custom OF graph code replaced with helpers, - removed tc358764_poweroff from remove callback. v5: - fixed supply names, - fixed broken console - added connector to fb_helper, - added detach callback - unbinding works, - fixed typo in error checking code, - removed sparse bridge->encoder check - core does it already. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsung.com: v4, v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180725154644.25412-6-a.hajda@samsung.com
2018-07-27drm/bridge: add support for sn65dsi86 bridge driverSandeep Panda
Add support for TI's sn65dsi86 dsi2edp bridge chip. The chip converts DSI transmitted signal to eDP signal, which is fed to the connected eDP panel. This chip can be controlled via either i2c interface or dsi interface. Currently in driver all the control registers are being accessed through i2c interface only. Also as of now HPD support has not been added to bridge chip driver. Changes in v1: - Split the dt-bindings and the driver support into separate patches (Andrzej Hajda). - Use of gpiod APIs to parse and configure gpios instead of obsolete ones (Andrzej Hajda). - Use macros to define the register offsets (Andrzej Hajda). Changes in v2: - Separate out edp panel specific HW resource handling from bridge driver and create a separate edp panel drivers to handle panel specific mode information and HW resources (Sean Paul). - Replace pr_* APIs to DRM_* APIs to log error or debug information (Sean Paul). - Remove some of the unnecessary structure/variable from driver (Sean Paul). - Rename the function and structure prefix "sn65dsi86" to "ti_sn_bridge" (Sean Paul / Rob Herring). - Remove most of the hard-coding and modified the bridge init sequence based on current mode (Sean Paul). - Remove the existing function to retrieve the EDID data and implemented this as an i2c_adapter and use drm_get_edid() (Sean Paul). - Remove the dummy irq handler implementation, will add back the proper irq handling later (Sean Paul). - Capture the required enable gpios in a single array based on dt entry instead of having individual descriptor for each gpio (Sean Paul). Changes in v3: - Remove usage of irq_gpio and replace it as "interrupts" property (Rob Herring). - Remove the unnecessary header file inclusions (Sean Paul). - Rearrange the header files in alphabetical order (Sean Paul). - Use regmap interface to perform i2c transactions. - Update Copyright/License field and address other review comments (Jordan Crouse). Changes in v4: - Update License/Copyright (Sean Paul). - Add Kconfig and Makefile changes (Sean Paul). - Drop i2c gpio handling from this bridge driver, since i2c sda/scl gpios will be handled by i2c master. - Update required supplies names. - Remove unnecessary goto statements (Sean Paul). - Add mutex lock to power_ctrl API to avoid race conditions (Sean Paul). - Add support to parse reference clk frequency from dt(optional). - Update the bridge chip enable/disable sequence. Changes in v5: - Fixed Kbuild test service reported warnings. Changes in v6: - Use PM runtime based ref-counting instead of local ref_count mechanism (Stephen Boyd). - Clean up some debug logs and indentations (Sean Paul). - Simplify dp rate calculation (Sean Paul). - Add support to configure refclk based on input REFCLK pin or DACP/N pin (Stephen Boyd). Changes in v7: - Use static supply entries instead of dynamic allocation (Andrzej Hajda). - Defer bridge driver probe if panel is not probed (Andrzej Hajda). - Update of_graph APIs for correct node reference management. (Andrzej Hajda). - Remove local display_mode object (Andrzej Hajda). - Remove version id check function from driver. Changes in v8: - Move dsi register/attach function to bridge driver probe (Andrzej Hajda). - Introduce a new helper function to write 16bit words into consecutive registers (Andrzej Hajda). - Remove unnecessary macros (Andrzej Hajda). Changes in v9: - Remove dsi register/attach from bridge probe, since dsi dev register completion also waits for any panel or bridge to get added. This creates deadlock situation when bridge driver calls dsi dev register and attach before bridge add, in its probe function. - Fix issues faced during testing of bridge driver on actual HW. - Remove unnecessary initializations (Stephen Boyd). - Use local refclk lut size instead of global macro (Sean Paul). Changes in v10: - Use refclk to determine if continuous dsi clock is needed or not. Changes in v11: - Read DPPLL_SRC register to determine continuous clock instead of using refclk handle (Stephen Boyd). Changes in v12: - Explain in comment as in why dsi dev registration is done in bridge_attach (Andrzej Hajda). - Move HPD disable to bridge_pre_enable (Andrzej Hajda). - Make panel/DDC exclusive until HPD support is added (Andrzej Hajda). Changes in v13: - eDP panels report EDID via DP-AUX channel, so remove support for dedicated DDC line (Andrzej Hajda). Changes in v14: - Remove unnecessary drm_panel checks (Andrzej Hajda). Signed-off-by: Sandeep Panda <spanda@codeaurora.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1532069642-21392-1-git-send-email-spanda@codeaurora.org
2018-06-20Merge drm-upstream/drm-next into drm-misc-nextGustavo Padovan
We got a few conflicts in drm_atomic.c after merging the DRM writeback support, now we need a backmerge to unlock develop development on drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2018-06-14drm/bridge: sil_sii8620: do not have a dependency of RC_COREInki Dae
This patch makes RC_CORE to be selected with this driver. sil_sii8620 driver calls remote controller interfaces directly so RC_CORE should be enabled mandatorily. And some boards not using remote controller device don't really need to know that RC_CORE config should be enabled to use sil_sii8620 driver only for HDMI. Changelog v2: - select INPUT because compiling will fail without INPUT. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1527154379-31886-1-git-send-email-inki.dae@samsung.com
2018-05-18Merge drm-fixes-for-v4.17-rc6-urgent into drm-nextDave Airlie
Need to backmerge some nouveau fixes to reduce the nouveau -next conflicts a lot. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-05-07drm/bridge/sii8620: add Kconfig dependency on extconAndrzej Hajda
The driver can work with or without extcon framework, but if extcon is build as module, sii8620 should be build as module as well. Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180409062708.4326-1-a.hajda@samsung.com Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-04-23drm/bridge: Add Cadence DSI driverBoris Brezillon
Add a driver for Cadence DPI -> DSI bridge. This driver only support a subset of Cadence DSI bridge capabilities. This driver has been tested/debugged in a simulated environment which explains why some of the features are missing. Here is a non-exhaustive list of missing features: * burst mode * DPHY init/configuration steps * support for additional input interfaces (SDI input) DSI commands and non-burst video mode have been tested. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180421070846.10330-1-boris.brezillon@bootlin.com
2018-04-20drm: bridge: Add thc63lvd1024 LVDS decoder driverJacopo Mondi
Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel output converter. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1524062429-325-3-git-send-email-jacopo+renesas@jmondi.org
2018-03-07bridge: Elaborate a bit on dumb VGA bridges in KconfigLinus Walleij
It's better if we explain a bit that this pertains to non-programmable VGA DAC bridges. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180302091426.8463-1-linus.walleij@linaro.org
2017-10-11drm/bridge/sii8620: add remote control supportMaciej Purski
MHL specification defines Remote Control Protocol(RCP) to send input events between MHL devices. The driver now recognizes RCP messages and reacts to them by reporting key events to input subsystem, allowing a user to control a device using TV remote control. Signed-off-by: Maciej Purski <m.purski@samsung.com> Acked-by: Sean Young <sean@mess.org> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1503565087-19730-1-git-send-email-m.purski@samsung.com
2017-10-06drm/bridge: add Silicon Image SiI9234 driverMaciej Purski
SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0. It is controlled via I2C bus. Its interaction with other devices in video pipeline is performed mainly on HW level. The only interaction it does on device driver level is filtering-out unsupported video modes, it exposes drm_bridge interface to perform this operation. This patch is based on the code refactored by Tomasz Stanislawski <t.stanislaws@samsung.com>, which was initially developed by: Adam Hampson <ahampson@sta.samsung.com> Erik Gilling <konkers@android.com> Shankar Bandal <shankar.b@samsung.com> Dharam Kumar <dharam.kr@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> Acked-by: Rob Herring <robh@kernel.org> [for dt bindings] Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507212431-5801-2-git-send-email-m.purski@samsung.com
2017-06-05drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.Eric Anholt
Many DRM drivers have common code to make a stub connector implementation that wraps a drm_panel. By wrapping the panel in a DRM bridge, all of the connector code (including calls during encoder enable/disable) goes away. v2: Fix build with CONFIG_DRM=m, drop "dev" argument that should just be the panel's dev, move kerneldoc up a level and document _remove(). v3: Fix another breakage with CONFIG_DRM=m, fix breakage with CONFIG_OF=n, move protos under CONFIG_DRM_PANEL_BRIDGE, wrap a line. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1) Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v2) Acked-by: Archit Taneja <architt@codeaurora.org> (v2) Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170602202514.11900-1-eric@anholt.net
2017-03-10drm: bridge: dw-hdmi: Move the driver to a separate directory.Laurent Pinchart
The driver is already made of 5 separate source files. Move it to a newly created directory named synopsys where more Synopsys bridge drivers can be added later (for the DisplayPort controller for instance). Suggested-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-10-laurent.pinchart+renesas@ideasonboard.com
2017-03-05drm: bridge: Add LVDS encoder driverLaurent Pinchart
The LVDS encoder driver is a DRM bridge driver that supports the parallel to LVDS encoders that don't require any configuration. The driver thus doesn't interact with the device, but creates an LVDS connector for the panel and exposes its size and timing based on information retrieved from DT. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170302104728.7150-3-laurent.pinchart+renesas@ideasonboard.com
2017-03-05drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)Peter Senna Tschudin
The video processing pipeline on the second output on the GE B850v3: Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output Each bridge has a dedicated flash containing firmware for supporting the custom design. The result is that in this design neither the STDP4028 nor the STDP2690 behave as the stock bridges would. The compatible strings include the suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with the firmware which is specific for the GE B850v3. The driver is powerless to control the video processing pipeline, as the two bridges behaves as a single one. The driver is only needed for telling the host about EDID / HPD, and for giving the host powers to ack interrupts. This driver adds one i2c_device for each bridge, but only one drm_bridge. This design allows the creation of a functional connector that is capable of reading EDID from the STDP2690 while handling interrupts on the STDP4028. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: David Airlie <airlied@linux.ie> Cc: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Enric Balletbo <enric.balletbo@collabora.com> Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/ad92919f2eaff2623a551aac94cf11ef948ff9ee.1488555615.git.peter.senna@collabora.com
2016-12-01Merge tag 'tilcdc-4.10' of https://github.com/jsarha/linux into drm-nextDave Airlie
tilcdc changes for v4.10 * tag 'tilcdc-4.10' of https://github.com/jsarha/linux: (23 commits) drm/tilcdc: fix parsing of some DT properties drm/tilcdc: Enable frame done irq and functionality for LCDC rev 1 drm/tilcdc: Configure video mode to HW in enable() not in mode_set_nofb() drm/tilcdc: Load palette at the end of mode_set_nofb() drm/tilcdc: Add timeout wait for palette loading to complete drm/tilcdc: Enable palette loading for revision 2 LCDC too drm/tilcdc: Fix load mode bit-field setting in tilcdc_crtc_enable() drm/tilcdc: Add tilcdc_write_mask() to tilcdc_regs.h drm/tilcdc: Fix tilcdc_crtc_create() return value handling drm/tilcdc: implement palette loading for rev1 drm/tilcdc: Enable sync lost error and recovery handling for rev 1 LCDC drm/tilcdc: Add drm bridge support for attaching drm bridge drivers drm/bridge: Add ti-tfp410 DVI transmitter driver dt-bindings: Move "ti,tfp410.txt" from display/ti to display/bridge drm/tilcdc: Recover from sync lost error flood by resetting the LCDC drm/tilcdc: Fix race from forced shutdown of crtc in unload drm/tilcdc: Use unload to handle initialization failures drm/tilcdc: Stop using struct drm_driver load() callback drm/tilcdc: Remove obsolete drm_connector_register() calls drm/tilcdc: Correct misspelling in error message ...
2016-11-30drm/bridge: Add ti-tfp410 DVI transmitter driverJyri Sarha
Add very basic ti-tfp410 DVI transmitter driver. The only feature separating this from a completely dummy bridge is the EDID read support trough DDC I2C. Even that functionality should be in a separate generic connector driver. However, because of missing DRM infrastructure support the connector is implemented within the bridge driver. Some tfp410 HW specific features may be added later if needed, because there is a set of registers behind i2c if it is connected. This implementation is tested against my new tilcdc bridge support and it works with BeagleBone DVI-D Cape Rev A3. A DT binding document is also updated. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Rob Herring <robh@kernel.org>
2016-11-28drm: bridge: dw-hdmi: add ASoC dependencyArnd Bergmann
The newly added sound driver depends on SND_SOC_HDMI_CODEC, which in turn only makes sense when ASoC is enabled, as shown by this warning: warning: (DRM_MSM && DRM_STI && DRM_MEDIATEK_HDMI && DRM_I2C_NXP_TDA998X && DRM_DW_HDMI_I2S_AUDIO) selects SND_SOC_HDMI_CODEC which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC) Since the audio driver is probably useless without the audio subsystem, adding a dependency here seems the right solution. Fixes: 2761ba6c0925 ("drm: bridge: add DesignWare HDMI I2S audio support") Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161125205411.1157522-1-arnd@arndb.de
2016-11-24drm: bridge: add DesignWare HDMI I2S audio supportKuninori Morimoto
Current dw-hdmi is supporting sound via AHB bus, but it has I2S audio feature too. This patch adds I2S audio support to dw-hdmi. This HDMI I2S is supported by using ALSA SoC common HDMI encoder driver. Tested-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/8737j2bxba.wl%kuninori.morimoto.gx@renesas.com
2016-10-26drm/bridge: add Silicon Image SiI8620 driverAndrzej Hajda
SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0. It is controlled via I2C bus. Its interaction with other devices in video pipeline is performed mainly on HW level. The only interaction it does on device driver level is filtering-out unsupported video modes, it exposes drm_bridge interface to perform this operation. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1476085157-5266-1-git-send-email-a.hajda@samsung.com
2016-10-10drm/bridge: Add RGB to VGA bridge supportMaxime Ripard
Some boards have an entirely passive RGB to VGA bridge, based on DACs implemented by resistor ladders. Those might or might not have an i2c bus routed to the VGA connector in order to access the screen EDIDs. Add a bridge that doesn't do anything but expose the modes available on the screen, either based on the EDIDs if available, or based on the XGA standards. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com
2016-07-17drm/bridge: tc358767: Add DPI to eDP bridge driverAndrey Gusakov
Add a drm_bridge driver for the Toshiba TC358767 DPI/DSI to eDP/DP bridge. Currently only DPI input with 24-bit RGB is supported. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Archit Taneja <architt@codeaurora.org>
2016-07-13drm/i2c: adv7511: Move to bridge folderArchit Taneja
The driver has been converted to use drm_bridge instead of drm_i2c_slave_encoder. We can now move it to the bridge folder. Create a separate folder since we already have a couple of files and expect more when we support audio and ADV7533. Rename the driver to adv7511_drv.c. This will come in handy later when the driver module will need to be built from multiple object files. Signed-off-by: Archit Taneja <architt@codeaurora.org>
2016-06-20drm/bridge: Add sii902x driverBoris Brezillon
Add basic support for the sii902x RGB -> HDMI bridge. This driver does not support audio output yet. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> --- Changes in v8: - remove useless headers inclusion - fix macro names (s/SIL/SII) - drop unneeded hotplug_work field from struct sii902x - drop drm_connector_unregister() call in the ->destroy() method - add a timeout when polling a register value Changes in v6: - use HDMI_INFOFRAME_SIZE(AVI) - fix reset_gpio initialization - reduce the reset time based on Ming feedback Changes in v5: - drop the best_encoder() implementation Changes in v4: - make reset GPIO optional - only support attaching to DRM devices supporting atomic updates Changes in v3: - fix get_modes() implementation to avoid turning the screen in power save mode - rename the driver (sil902x -> sii902x) Changes in v2: - fix errors reported by the kbuild robot fixup! drm: bridge: Add sii902x driver
2016-05-12drm/bridge: Add Analogix anx78xx supportEnric Balletbo i Serra
Although there are other chips from the same family that can reuse this driver, at the moment we only tested ANX7814 chip. The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices. This driver adds initial support for HDMI to DP pass-through mode. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Thierry Reding <treding@nvidia.com> [treding@nvidia.com: coding style, propagate regulator_get() errors] Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-04-05drm: bridge: analogix/dp: split exynos dp driver to bridge directoryYakir Yang
Split the dp core driver from exynos directory to bridge directory, and rename the core driver to analogix_dp_*, rename the platform code to exynos_dp. Beside the new analogix_dp driver would export six hooks. "analogix_dp_bind()" and "analogix_dp_unbind()" "analogix_dp_suspned()" and "analogix_dp_resume()" "analogix_dp_detect()" and "analogix_dp_get_modes()" The bind/unbind symbols is used for analogix platform driver to connect with analogix_dp core driver. And the detect/get_modes is used for analogix platform driver to init the connector. They reason why connector need register in helper driver is rockchip drm haven't implement the atomic API, but Exynos drm have implement it, so there would need two different connector helper functions, that's why we leave the connector register in helper driver. Acked-by: Inki Dae <inki.dae@samsung.com> Tested-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Douglas Anderson <dianders@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-24drm/bridge: Remove gratuitous blank lineThierry Reding
A single blank line is enough to separate Kconfig entries. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-09drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driverRussell King
Parse the ELD (EDID like data) stored from the HDMI driver to restrict the sample rates and channels which are available to ALSA. This causes the ALSA device to reflect the capabilities of the overall audio path, not just what is supported at the HDMI source interface level. Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-19 16:45:49 +0000