summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/atmel-hlcdc
AgeCommit message (Collapse)Author
2019-01-29drm/irq: Don't check for DRIVER_HAVE_IRQ in drm_irq_(un)installDaniel Vetter
If a non-legacy driver calls these it's valid to assume there is interrupt support. The flag is really only needed for legacy drivers, which control IRQ enabling/disabling through the DRM_IOCTL_CONTROL legacy IOCTL. Also remove all the flag usage from non-legacy drivers. v2: Review from Emil: - improve commit message - I forgot hibmc, fix that Cc: linux-arm-kernel@lists.infradead.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190129104248.26607-1-daniel.vetter@ffwll.ch
2019-01-27drm/atmel-hlcdc: fix clipping of planesPeter Rosin
With the help from drm_atomic_helper_check_plane_state function, clipping now handles planes to be partially or totally off-screen. The plane is disabled if it is not visible. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-4-peda@axentia.se
2019-01-27drm/atmel-hlcdc: do not swap w/h of the crtc when a plane is rotatedPeter Rosin
The destination crtc rectangle is independent of source plane rotation. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-3-peda@axentia.se
2019-01-27drm/atmel-hlcdc: rotate planes counterclockwisePeter Rosin
Ouch, the driver rotates planes clockwise, which is simply not correct. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190110151020.30468-2-peda@axentia.se
2019-01-24drm: Split out drm_probe_helper.hDaniel Vetter
Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2018-11-01drm/atmel-hlcdc: Use drm_fbdev_generic_setup()Noralf Trønnes
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-7-noralf@tronnes.org
2018-10-05drm/atmel: Drop transitional hooksDaniel Vetter
These do absolutely nothing for atomic drivers. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-10-daniel.vetter@ffwll.ch
2018-09-27drm/atmel-hlcdc: Replace drm_dev_unref with drm_dev_putThomas Zimmermann
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180701132415.10161-1-contact@tzimmermann.org
2018-08-27drm/atmel-hlcdc: support bus-width (12/16/18/24) in endpoint nodesPeter Rosin
This beats the heuristic that the connector is involved in what format should be output for cases where this fails. E.g. if there is a bridge that changes format between the encoder and the connector, or if some of the RGB pins between the lcd controller and the encoder are not routed on the PCB. This is critical for the devices that have the "conflicting output formats" issue (SAM9N12, SAM9X5, SAMA5D3), since the most significant RGB bits move around depending on the selected output mode. For devices that do not have the "conflicting output formats" issue (SAMA5D2, SAMA5D4), this is completely irrelevant. Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-5-peda@axentia.se
2018-08-27drm/atmel-hlcdc: always iterate over the first 4 output endpointsPeter Rosin
This enables more flexible devicetrees. You can e.g. have two output nodes where one is not enabled, without the ordering affecting things. Prior to this patch the active nodes had to have endpoint id zero and upwards consecutively. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180825085620.10566-4-peda@axentia.se
2018-08-27drm/atmel-hlcdc: allow selecting a higher pixel-clock than requestedPeter Rosin
But only if the highest pixel-clock frequency lower than requested is significantly less accurate than the lowest frequency higher than requested. I pulled "10 times" as the discriminator out of the hat, and went with that. This is useful, if e.g. the target pixel-clock is 65MHz and the sys_clk is 132MHz. In this case the highest possible pixel-clock lower than the requested 65MHz is 52.8MHz, which is almost 20% off (and outside the spec for the panel). The lowest possible pixel-clock higher than 65MHz is 66MHz, which is a *much* better match, and only 1.5% off. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180824092458.13165-3-peda@axentia.se
2018-08-27drm/atmel-hlcdc: prefer a higher rate clock as pixel-clock basePeter Rosin
If the divider used to get the pixel-clock is small, the granularity of the frequencies possible for the pixel-clock is quite coarse. E.g. requesting a pixel-clock of 65MHz with a sys_clk of 132MHz results in the divider being set to 3 ending up with 44MHz. By preferring the doubled sys_clk as base, the divider instead ends up as 5 yielding a pixel-clock of 52.8Mhz, which is a definite improvement. While at it, clamp the divider so that it does not overflow in case it gets big. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180824092458.13165-2-peda@axentia.se
2018-08-06drm: atmel-hlcdc: Use __drm_atomic_helper_plane_reset instead of copying the ↵Alexandru Gheorghe
logic A new helper function(__drm_atomic_helper_plane_reset) has been added for linking a plane with its state and resetting the core properties(alpha, rotation, etc.) to their default values. Use that instead of duplicating the logic. __drm_atomic_helper_plane_reset initializes the alpha property to its max value, which is defined by the drm core as DRM_BLEND_ALPHA_OPAQUE, so nothing changes regarding the alpha value. Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-5-alexandru-cosmin.gheorghe@arm.com
2018-06-28Merge tag 'ib-fbdev-drm-v4.19-deferred-console-takeover' of ↵Gustavo Padovan
https://github.com/bzolnier/linux into drm-misc-next Immutable branch between fbdev and drm for the v4.19 merge window (contains the deferred console takeover feature) Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> # gpg: Signature made Thu 28 Jun 2018 10:24:50 AM -03 # gpg: using RSA key 7E33B63FA047C20B # gpg: Can't check signature: public key not found # Conflicts: # drivers/gpu/drm/i915/i915_gem.c # drivers/gpu/drm/i915/intel_crt.c # drivers/gpu/drm/i915/intel_display.c # drivers/gpu/drm/i915/intel_lrc.c Link: https://patchwork.freedesktop.org/patch/msgid/2462549.rLSfW9kX99@amdc3058
2018-06-22Merge tag 'drm-misc-fixes-2018-06-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v4.18-rc2: - A reversion of a commit in drm/sun4i to fix a run-time fault. - Various fixes to the sii8620 bridge. - Small bugfix to correctly check stride in atmel-hlcdc. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com
2018-06-17drm/atmel-hlcdc: check stride values in the first planeStefan Agner
The statement always evaluates to true since the struct fields are arrays. This has shown up as a warning when compiling with clang: warning: address of array 'desc->layout.xstride' will always evaluate to 'true' [-Wpointer-bool-conversion] Check for values in the first plane instead. Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support") Cc: <stable@vger.kernel.org> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180617084826.31885-1-stefan@agner.ch
2018-05-25drm/atmel-hlcdc: Stop using plane->fbVille Syrjälä
We want to get rid of plane->fb on atomic drivers. Stop looking at it. Daniel pointed out that the drm_framebuffer_put() in the plane cleanup indicates that the driver doesn't shut things down cleanly. To do that we should be able to just call drm_atomic_helper_shutdown(). Not really sure the current cleanup sequence is actually sane, but whatever. v2: Replace the drm_framebuffer_put() with drm_atomic_helper_shutdown() (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-10-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-05-25drm/atmel-hlcdc: Stop consulting plane->crtcVille Syrjälä
We want to get rid of plane->crtc on atomic drivers. Stop looking at it. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405151400.11326-3-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2018-04-16drm/atmel-hclcdc: Convert to the new generic alpha propertyMaxime Ripard
Now that we have support for per-plane alpha in the core, let's use it. Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/e5e97e2aae129600233e0983b748e4ba51ced239.1523432341.git-series.maxime.ripard@bootlin.com
2018-01-29drm/atmel-hlcdc: Use the alpha format field in drm_format_infoMaxime Ripard
Now that the drm_format_info has a alpha field to tell if a format embeds an alpha component in it, let's use it. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/23518426a46320dd884465cebec0961f839f2972.1516617243.git-series.maxime.ripard@free-electrons.com
2017-12-08drm/atmel-hlcdc: Use drm_fb_cma_fbdev_init/fini()Noralf Trønnes
Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on the fact that drm_device holds a pointer to the drm_fb_helper structure. This means that the driver doesn't have to keep track of that. Also use the drm_fb_helper functions directly. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-6-noralf@tronnes.org
2017-11-15Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-27drm/atmel-hlcdc: Use drm_gem_fb_create()Noralf Trønnes
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-8-git-send-email-noralf@tronnes.org
2017-08-08drm: Nuke drm_atomic_helper_plane_set_propertyDaniel Vetter
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_plane_set_property. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-6-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-08-08drm: Nuke drm_atomic_helper_crtc_set_propertyDaniel Vetter
It's dead code because this is now handled in the core. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-5-daniel.vetter@ffwll.ch Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
2017-08-03drm/atmel-hlcdc: switch to drm_*{get,put} helpersCihangir Akturk
drm_*_reference() and drm_*_unreference() functions are just compatibility alias for drm_*_get() and drm_*_put() and should not be used by new code. So convert all users of compatibility functions to use the new APIs. Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501761585-11757-6-git-send-email-cakturk@gmail.com
2017-08-03drm/atmel-hlcdc : constify drm_plane_helper_funcs and drm_plane_funcs.Arvind Yadav
drm_plane_helper_funcs and drm_plane_funcsare not supposed to change at runtime. All functions working with drm_plane_helper_funcs and drm_plane_funcs work with const. So mark the non-const structs as const. File size before: text data bss dec hex filename 6072 596 0 6668 1a0c atmel_hlcdc_plane.o File size After adding 'const': text data bss dec hex filename 6218 436 0 6654 19fe atmel_hlcdc_plane.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/646415a3b2e62182f85254115e8491e5caf4b2c7.1499098826.git.arvind.yadav.cs@gmail.com
2017-08-01drm: Plumb modifiers through plane initBen Widawsky
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Stone <daniels@collabora.com>
2017-07-29drm/atmel-hlcdc: Use .dumb_map_offset and .dumb_destroy defaultsNoralf Trønnes
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-7-git-send-email-noralf@tronnes.org
2017-07-26drm/atmel-hlcdc: Handle drm_atomic_helper_swap_state failureMaarten Lankhorst
drm_atomic_helper_swap_state() will be changed to interruptible waiting in the next few commits, so all drivers have to be changed to handling failure. Atmel tracks pending commits through dc->commit.pending, so it can ignore the changes by setting stall = false. We never return failure in this case, so make failure a BUG_ON. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170711143314.2148-5-maarten.lankhorst@linux.intel.com Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-13drm/atmel-hlcdec: Use for_each_new_connector_in_stateMaarten Lankhorst
for_each_obj_in_state is about to be removed, so use the new iterator macros. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-9-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-06-30drm: Convert atomic drivers from CRTC .disable() to .atomic_disable()Laurent Pinchart
The CRTC .disable() helper operation is deprecated for atomic drivers, the new .atomic_disable() helper operation being preferred. Convert all atomic drivers to .atomic_disable() to avoid cargo-cult use of .disable() in new drivers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com
2017-06-30drm: Add old state pointer to CRTC .enable() helper functionLaurent Pinchart
The old state is useful for drivers that need to perform operations at enable time that depend on the transition between the old and new states. While at it, rename the operation to .atomic_enable() to be consistent with .atomic_disable(), as the .enable() operation is used by atomic helpers only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
2017-06-27Merge remote-tracking branch 'airlied/drm-next' into drm-misc-nextSean Paul
Required for Daniel's drm_vblank_cleanup cleanup
2017-06-22drm: atmel-hlcdc: add support for 8-bit color lookup table modePeter Rosin
All layers of all supported chips support this, the only variable is the base address of the lookup table in the register map. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1498107791-17450-3-git-send-email-peda@axentia.se
2017-06-22drm: atmel-hlcdc: add missing .set_property helper to the crtcPeter Rosin
The default implementation should be used. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1498107791-17450-2-git-send-email-peda@axentia.se
2017-06-21drm/atmel-hlcdc: Remove unnecessary NULL checkThierry Reding
drm_fbdev_cma_hotplug_event() already checks for NULL pointers before dereferencing, so callers don't need to do that. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170329144401.1804-11-thierry.reding@gmail.com
2017-06-16Merge tag 'drm-misc-next-2017-06-15' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Cross-subsystem Changes: - dt-bindings: add vendor prefix for NLT Technologies, Ltd. (Lucas) - dt-bindings: Add support for samsung s6e3hf2 panel (Hoegeun) Core Changes: - Add drm_panel_bridge to avoid connector boilerplate in drivers (Eric) - Trival fixes for dupe forward decl and reduce scope of variable (Dawid) Driver Changes: - dw-hdmi: Use mode_valid hook on bridge instead of connector (Jose) - vc4,atmel-hlcdc: Use drm_panel_bridge where appropriate (Eric) - panel: Add Innolux P079ZCA panel driver (Chris) - panel-simple: Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels (Lucas) - panel-samsung-s6e3ha2: Add s6e3hf2 panel support (Hoegeun) - zte,vc4,pl111,panel,mxsfb: Miscellaneous fixes Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Eric Anholt <eric@anholt.net> Cc: Chris Zhong <zyw@rock-chips.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Hoegeun Kwon <hoegeun.kwon@samsung.com> Cc: Dawid Kurek <dawikur@gmail.com> * tag 'drm-misc-next-2017-06-15' of git://anongit.freedesktop.org/git/drm-misc: (26 commits) drm: Reduce scope of 'state' variable drm: mxsfb_crtc: Reset the eLCDIF controller drm: Remove duplicate forward declaration drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e board dt-bindings: Add support for samsung s6e3hf2 panel drm/panel: add backlight dependency for sitronix-st7789v drm/panel: S6E3HA2 needs backlight code drm/panel: simple: add support for AUO P320HVN03 drm/panel: simple: add support for NLT NL192108AC18-02D dt-bindings: add vendor prefix for NLT Technologies, Ltd. drm/panel: simple: add support for NEC NL12880B20-05 drm/panel: add Innolux P079ZCA panel driver dt-bindings: Add INNOLUX P079ZCA panel bindings drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path drm/vc4/vc4_bo.c: always set bo->resv drm: Add const to name field declaration in struct drm_prop_enum_list drm/pl111: Fix offset calculation for the primary plane. drm/atmel-hlcdc: Fix panel registration drm/bridge: Build the panel wrapper in drm_kms_helper drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge. ...
2017-06-07drm/atmel-hlcdc: Fix panel registrationBoris Brezillon
Attach the panel-bridge created by drm_panel_bridge_add() to the parallel RGB encoder. Fixes: 96160a8071b2 ("drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge.") Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1496748866-17165-1-git-send-email-boris.brezillon@free-electrons.com
2017-06-06Merge tag 'drm-misc-next-2017-06-02' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next Core Changes: - Stop proliferation of drm_vblank_cleanup by adding to the docs and deleting boilerplate (Daniel) - Roll out and use mode_valid hooks across crtc/encoder/bridge (Jose) - Add drm_vblank.[hc] to isolate vblank code from optional irq helpers (Daniel) Driver Changes: - Replace drm_for_each_connector with drm_for_each_connector_iter (Gustavo) - A couple misc driver fixes Cc: Gustavo Padovan <gustavo.padovan@collabora.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Daniel Vetter <daniel.vetter@intel.com> * tag 'drm-misc-next-2017-06-02' of git://anongit.freedesktop.org/git/drm-misc: (34 commits) drm/vc4: Mark the device as active when enabling runtime PM. drm: remove writeq/readq function definitions drm/atmel-hlcdc: Use crtc->mode_valid() callback drm/exynos: Drop drm_vblank_cleanup drm/hdlcd|mali: Drop drm_vblank_cleanup drm/doc: Polish irq helper documentation drm: Extract drm_vblank.[hc] drm/vc4: Fix comment in vc4_drv.h drm/pl111: fix warnings without CONFIG_ARM_AMBA drm/atomic: Consitfy mode parameter to drm_atomic_set_mode_for_crtc() drm/arcgpu: Drop drm_vblank_cleanup drm/atmel: Drop drm_vblank_cleanup drm/imx: Drop drm_vblank_cleanup drm/meson: Drop drm_vblank_cleanup drm/stm: Drop drm_vblank_cleanup drm/sun4i: Drop drm_vblank_cleanup drm: better document how to send out the crtc disable event drm: Use vsnprintf extension %ph drm/doc: move printf helpers out of drmP.h drm/pl111: select DRM_PANEL ...
2017-06-05drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge.Eric Anholt
This cuts 135 lines of boilerplate, at the cost of losing the filtering of get_modes() using atmel_hlcdc_dc_mode_valid(). The atomic check will still check that we don't set an invalid mode, though. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170511183128.25085-7-eric@anholt.net
2017-06-05drm/atmel-hlcdc: Drop custom encoder cleanup func.Eric Anholt
drm_encoder_cleanup() finishes with memsetting it to 0, already. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170511183128.25085-6-eric@anholt.net
2017-06-02drm/atmel-hlcdc: Use crtc->mode_valid() callbackJose Abreu
Now that we have a callback to check if crtc supports a given mode we can use it in atmel-hlcdc so that we restrict the number of probbed modes to the ones we can actually display. Also, remove the mode_fixup() callback as this is no longer needed because mode_valid() will be called before. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/95fd6c06c58bd0b957e36a8d7068e6a74b581304.1495720737.git.joabreu@synopsys.com
2017-05-31drm/atmel: Drop drm_vblank_cleanupDaniel Vetter
Again almost correct, but since interrupts are shut down after vblank still a race. Proper cleanup would call drm_atomic_helper_shutdown to make sure this really is safe. v2: Remove misplace malidp hunk (Liviu). Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-18-daniel.vetter@ffwll.ch
2017-05-30Backmerge tag 'v4.12-rc3' into drm-nextDave Airlie
Linux 4.12-rc3 Daniel has requested this for some drm-intel-next work.
2017-05-22drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPIRobert Foss
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI as a convenience. Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up through the atomic API, but realizing that userspace is likely to take shortcuts and assume that the enum values are what is sent over the wire. As a result these defines are provided purely as a convenience to userspace applications. Changes since v3: - Switched away from past tense in comments - Add define name change to previously mis-spelled DRM_REFLECT_X comment - Improved the comment for the DRM_MODE_REFLECT_<axis> comment Changes since v2: - Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_ - Fix compilation errors - Changed comment formatting - Deduplicated comment lines - Clarified DRM_MODE_PROP_REFLECT_ comment Changes since v1: - Moved defines from drm.h to drm_mode.h - Changed define prefix from DRM_ to DRM_MODE_PROP_ - Updated uses of the defines to the new prefix - Removed include from drm_rect.c - Stopped using the BIT() macro Signed-off-by: Robert Foss <robert.foss@collabora.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
2017-05-18drm/atmel-hlcdc: Fix output initializationBoris Brezillon
drm_of_find_panel_or_bridge() is expecting np to point to the encoder node, not the bridge or panel this encoder is feeding. Moreover, the endpoint parameter passed to drm_of_find_panel_or_bridge() is always set to zero, which prevents us from probing all outputs. We also move the atmel_hlcdc_rgb_output allocation after the panel/bridge detection to avoid useless allocations. Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1495110921-4032-1-git-send-email-boris.brezillon@free-electrons.com
2017-04-18drm: atmel-hlcdc: Uninitialized return in atmel_hlcdc_create_outputs()Dan Carpenter
It's not possible for endpoint to be zero so the test doesn't work. If we break on the first iteration through the loop then endpoint is 1 and "ret" is uninitialized. Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170415192142.GA6416@mwanda
2017-04-06drm: convert drivers to use drm_of_find_panel_or_bridgeRob Herring
Similar to the previous commit, convert drivers open coding OF graph parsing to use drm_of_find_panel_or_bridge instead. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul dropped rockchip changes since they're now obsolete] Signed-off-by: Sean Paul <seanpaul@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 19:33:15 +0000