summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/ast
AgeCommit message (Collapse)Author
2014-09-12drm/ast: switch to using CACHED by default for sysramDave Airlie
This fixes problems on ppc64 platforms, where we could end up using a WC mapping for migrating BOs with memcpy, when really we want to use cached memory. Tested-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-12drm/ast: AST2000 cannot be detected correctlyY.C. Chen
Type error and cause AST2000 cannot be detected correctly Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Egbert Eich <eich@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-12drm/ast: open key before detect chipsY.C. Chen
Some config settings like 3rd TX chips will not get correctly if the extended reg is protected Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Egbert Eich <eich@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-09-10drm: add driver->set_busid() callbackDavid Herrmann
One step closer to dropping all the drm_bus_* code: Add a driver->set_busid() callback and make all drivers use the generic helpers. Nouveau is the only driver that uses two different bus-types with the same drm_driver. This is totally broken if both buses are available on the same machine (unlikely, but lets be safe). Therefore, we create two different drivers for each platform during module_init() and set the set_busid() callback respectively. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-28drm/ast: Add missing entry to dclk_table[]Y.C. Chen
This avoid reading past the end of the list for certain modes Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Egbert Eich <eich@freedesktop.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-27drm/ttm: move fpfn and lpfn into each placement v2Christian König
This allows us to more fine grained specify where to place the buffer object. v2: rebased on drm-next, add bochs changes as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-22drm/ttm: Fix a few sparse warningsThierry Reding
The final parameter to ttm_bo_reserve() is a pointer, therefore callers should use NULL instead of 0. Fixes a bunch of sparse warnings of this type: warning: Using plain integer as NULL pointer Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-18drm/ast: use helpersRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm: Introduce drm_fb_helper_prepare()Thierry Reding
To implement hotplug detection in a race-free manner, drivers must call drm_kms_helper_poll_init() before hotplug events can be triggered. Such events can be triggered right after any of the encoders or connectors are initialized. At the same time, if the drm_fb_helper_hotplug_event() helper is used by a driver, then the poll helper requires some parts of the FB helper to be initialized to prevent a crash. At the same time, drm_fb_helper_init() requires information that is not necessarily available at such an early stage (number of CRTCs and connectors), so it cannot be used yet. Add a new helper, drm_fb_helper_prepare(), that initializes the bare minimum needed to allow drm_kms_helper_poll_init() to execute and any subsequent hotplug events to be processed properly. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm: Constify struct drm_fb_helper_funcsThierry Reding
There's no need for this to be modifiable. Make it const so that it can be put into the .rodata section. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-19drm: add register and unregister functions for connectorsThomas Wood
Introduce generic functions to register and unregister connectors. This provides a common place to add and remove associated user space interfaces. Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-10drm: Remove spurious ';'Damien Lespiau
One small step after another, the never-ending crusade towards better code continues. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-02drm/ast: Fix double lock at PM resumeTakashi Iwai
The recent commit [3ea87855: drm/helper: lock all around force mode restore] introduced drm_modeset_lock_all() in drm_helper_resume_force_mode() itself, while ast driver still takes this lock before calling it. Remove the caller side lock for avoid a fatal deadlock. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-19Merge branch 'ast-updates' of ssh://people.freedesktop.org/~/linux into drm-nextDave Airlie
Pull in latest updates to AST driver. * 'ast-updates' of ssh://people.freedesktop.org/~/linux: drm/ast: initial DP501 support (v0.2) drm/ast: rename the mindwm/moutdwm and deinline them drm/ast: resync the dram post code with upstream drm/ast: add AST 2400 support. drm/ast: add widescreen + rb modes from X.org driver (v2)
2014-05-19drm/ast: initial DP501 support (v0.2)Dave Airlie
This is the initial attempt at porting the DP501 code from the userspace driver, the firmware file is in http://people.freedesktop.org/~airlied/ast_dp501_fw.bin this should really be exposed as another encoder/connector that is cloneable v0.2: init 3rd tx properly, add scratch reduction of VRAM size backup firmware properly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-19drm/ast: rename the mindwm/moutdwm and deinline themDave Airlie
we'll need these elsewhere for dp501. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-19drm/ast: resync the dram post code with upstreamDave Airlie
This resyncs the dram post code with the upstream X.org driver where ast have improved the code for setting up the dram chips. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-19drm/ast: add AST 2400 support.Dave Airlie
This is ported from the userspace driver. Untested on any ast2400 hw so far. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-19drm/ast: add widescreen + rb modes from X.org driver (v2)Dave Airlie
This syncs up the mode code from the X.org driver upstream, and adds the mode validation step for hw that doesn't have widescreen. v2: (from Egbert Eich <eich@suse.de) squash drm/ast: Use correct structure member for mode validation to avoid bisect regression. In struct drm_display_mode crtc_hdisplay and crtc_vdisplay are holding the crtc parameters after mode fixup. For validation we need hdisplay and vdisplay. Signed-off-by: Egbert Eich <eich@suse.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-05-16Merge tag 'topic/core-stuff-2014-05-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Update pull request with drm core patches. Mostly some polish for the primary plane stuff and a pile of patches all over from Thierry. Has survived a few days in drm-intel-nightly without causing ill. I've frobbed my scripts a bit to also tag my topic branches so that you have something stable to pull - I've accidentally pushed a bunch more patches onto this branch before you've taken the old pull request. * tag 'topic/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel: drm: Make drm_crtc_helper_disable() return void drm: Fix indentation of closing brace drm/dp: Fix typo in comment drm: Fixup flip-work kerneldoc drm/fb: Fix typos drm/edid: Cleanup kerneldoc drm/edid: Drop revision argument for drm_mode_std() drm: Try to acquire modeset lock on panic or sysrq drm: remove unused argument from drm_open_helper drm: Handle ->disable_plane failures correctly drm: Simplify fb refcounting rules around ->update_plane drm/crtc-helper: gc usless connector loop in disable_unused_functions drm/plane_helper: don't disable plane in destroy function drm/plane-helper: Fix primary plane scaling check drm: make mode_valid callback optional drm/edid: Fill PAR in AVI infoframe based on CEA mode list
2014-05-01Merge branch 'drm-init-cleanup' of git://people.freedesktop.org/~danvet/drm ↵Dave Airlie
into drm-next Next pull request, this time more of the drm de-midlayering work. The big thing is that his patch series here removes everything from drm_bus except the set_busid callback. Thierry has a few more patches on top of this to make that one optional to. With that we can ditch all the non-pci drm_bus implementations, which Thierry has already done for the fake tegra host1x drm_bus. Reviewed by Thierry, Laurent and David and now also survived some testing on my intel boxes to make sure the irq fumble is fixed correctly ;-) The last minute rebase was just to add the r-b tags from Thierry for the 2 patches I've redone. * 'drm-init-cleanup' of git://people.freedesktop.org/~danvet/drm: drm/<drivers>: don't set driver->dev_priv_size to 0 drm: Remove dev->kdriver drm: remove drm_bus->get_name drm: rip out dev->devname drm: inline drm_pci_set_unique drm: remove bus->get_irq implementations drm: pass the irq explicitly to drm_irq_install drm/irq: Look up the pci irq directly in the drm_control ioctl drm/irq: track the irq installed in drm_irq_install in dev->irq drm: rename dev->count_lock to dev->buf_lock drm: Rip out totally bogus vga_switcheroo->can_switch locking drm: kill drm_bus->bus_type drm: remove drm_dev_to_irq from drivers drm/irq: remove cargo-culted locking from irq_install/uninstall drm/irq: drm_control is a legacy ioctl, so pci devices only drm/pci: fold in irq_by_busid support drm/irq: simplify irq checks in drm_wait_vblank
2014-04-23drm/<drivers>: don't set driver->dev_priv_size to 0Daniel Vetter
Especially not on modesetting drivers - this is used to size the driver private structure for legacy drm buffers. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-22drm/ast: Remove unecessary NULL check in gem_freeDaniel Vetter
The ->gem_free_object never gets called with a NULL pointer, the check is redundant. Also checking after the upcast allows compilers to elide it anyway. Spotted by coverity. v2: Fix patch subject. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-22drm/ast: Remove unnecessary NULL check in bo_unrefDaniel Vetter
ttm_bo_unref unconditionally calls kref_put on it's argument, so the thing can't be NULL without already causing Oopses. Spotted by coverity. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-22drm: make mode_valid callback optionalAndrzej Hajda
Many drm connectors do not need mode validation. The patch makes this callback optional and removes dumb implementations. v2: Rebase: - imx move to a shared (but still dummy) ->mode_valid implementation. - probe helpers have been extracted to drm_probe_helper.c Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-18drm/ast: fix value check in cbr_scan2Dave Airlie
this is a typo vs the ums driver, fix to check correct value. Found initially by Coverity. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-01drm: Replace crtc fb with primary plane fb (v3)Matt Roper
Now that CRTC's have a primary plane, there's no need to track the framebuffer in the CRTC. Replace all references to the CRTC fb with the primary plane's fb. This patch was generated by the Coccinelle semantic patching tool using the following rules: @@ struct drm_crtc C; @@ - (C).fb + C.primary->fb @@ struct drm_crtc *C; @@ - (C)->fb + C->primary->fb v3: Generate patch via coccinelle. Actual removal of crtc->fb has been moved to a subsequent patch. v2: Fixup several lingering crtc->fb instances that were missed in the first patch iteration. [Rob Clark] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-03-16drm: init TTM dev_mapping in ttm_bo_device_init()David Herrmann
With dev->anon_inode we have a global address_space ready for operation right from the beginning. Therefore, there is no need to do a delayed setup with TTM. Instead, set dev_mapping during initialization in ttm_bo_device_init() and remove any "if (dev_mapping)" conditions. Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-03-16drm: use anon-inode instead of relying on cdevsDavid Herrmann
DRM drivers share a common address_space across all character-devices of a single DRM device. This allows simple buffer eviction and mapping-control. However, DRM core currently waits for the first ->open() on any char-dev to mark the underlying inode as backing inode of the device. This delayed initialization causes ugly conditions all over the place: if (dev->dev_mapping) do_sth(); To avoid delayed initialization and to stop reusing the inode of the char-dev, we allocate an anonymous inode for each DRM device and reset filp->f_mapping to it on ->open(). Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-02-06drm/mgag200,ast,cirrus: fix regression with drm_can_sleep conversionDave Airlie
I totally sign inverted my way out of this one. Cc: stable@vger.kernel.org Reported-by: "Sabrina Dubroca" <sd@queasysnail.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-01-29drm: ast,cirrus,mgag200: use drm_can_sleepDave Airlie
these 3 were checking in_interrupt but we have situations where calling vunmap under this could cause a BUG to be hit in smp_call_function_many. Use the drm_can_sleep macro instead, which should stop this path from been taken in this case. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-01-14drivers: gpu: Mark functions as static in ast_ttm.cRashika
Mark functions ast_ttm_global_release(), ast_ttm_bo_is_ast_bo() and ast_ttm_tt_create() as static in drm/ast/ast_ttm.c because they are not used outside this file. This eliminates the following warnings in drm/ast/ast_ttm.c: drivers/gpu/drm/ast/ast_ttm.c:84:1: warning: no previous prototype for ‘ast_ttm_global_release’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_ttm.c:105:6: warning: no previous prototype for ‘ast_ttm_bo_is_ast_bo’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_ttm.c:211:16: warning: no previous prototype for ‘ast_ttm_tt_create’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-01-14drivers: gpu: Mark functions as static in ast_mode.cRashika
Mark functions ast_set_sync_reg(), ast_set_dac_reg(), ast_set_start_address_crt1(), ast_crtc_init(), ast_encoder_init(), ast_connector_init(), ast_cursor_init(), ast_cursor_fini(), ast_show_cursor() and ast_hide_cursor() as static in drm/ast/ast_mode.c because they are not used outside this file. This eliminates the following warning in drm/ast/ast_mode.c: drivers/gpu/drm/ast/ast_mode.c:407:6: warning: no previous prototype for ‘ast_set_sync_reg’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_mode.c:418:6: warning: no previous prototype for ‘ast_set_dac_reg’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_mode.c:430:6: warning: no previous prototype for ‘ast_set_start_address_crt1’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_mode.c:626:5: warning: no previous prototype for ‘ast_crtc_init’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_mode.c:713:5: warning: no previous prototype for ‘ast_encoder_init’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_mode.c:780:5: warning: no previous prototype for ‘ast_connector_init’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_mode.c:813:5: warning: no previous prototype for ‘ast_cursor_init’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_mode.c:850:6: warning: no previous prototype for ‘ast_cursor_fini’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_mode.c:968:6: warning: no previous prototype for ‘ast_show_cursor’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_mode.c:979:6: warning: no previous prototype for ‘ast_hide_cursor’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-01-14drivers: gpu: Mark function as static and remove unused function in ast_main.cRashika
Mark function ast_bo_unref() as static because it is not used outside file ast_main.c and remove unused function ast_get_max_dclk() in ast_main.c. This eliminates the following warning in drm/ast/ast_main.c: drivers/gpu/drm/ast/ast_main.c:192:10: warning: no previous prototype for ‘ast_get_max_dclk’ [-Wmissing-prototypes] drivers/gpu/drm/ast/ast_main.c:452:6: warning: no previous prototype for ‘ast_bo_unref’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-11drm: Add separate Kconfig option for fbdev helpersDaniel Vetter
For drivers which might want to disable fbdev legacy support. Select the new option in all drivers for now, so this shouldn't result in any change. Drivers need some work anyway to make fbdev support optional (if they have it implemented, that is), so the recommended way to expose this is by adding per-driver options. At least as long as most drivers don't support disabling the fbdev support. v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm driver can already take advantage of this, which allows us to build msm without any fbdev depencies in the kernel! v3: Move the MODULE_* stuff from the fbdev helper file to drm_crtc_helper.c. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Dave Airlie <airlied@linux.ie> Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-09drm: kill ->gem_init_object() and friendsDavid Herrmann
All drivers embed gem-objects into their own buffer objects. There is no reason to keep drm_gem_object_alloc(), gem->driver_private and ->gem_init_object() anymore. New drivers are highly encouraged to do the same. There is no benefit in allocating gem-objects separately. Cc: Dave Airlie <airlied@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Ben Skeggs <skeggsb@gmail.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-12drm/ast: fix the ast open key functionDave Airlie
When porting from UMS I mistyped this from the wrong place, AST noticed and pointed it out, so we should fix it to be like the X.org driver. Reported-by: Y.C. Chen <yc_chen@aspeedtech.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-09-02Merge branch 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: This is the radeon drm-next request. Big changes include: - support for dpm on CIK parts - support for ASPM on CIK parts - support for berlin GPUs - major ring handling cleanup - remove the old 3D blit code for bo moves in favor of CP DMA or sDMA - lots of bug fixes [airlied: fix up a bunch of conflicts from drm_order removal] * 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits) drm/radeon/dpm: make sure dc performance level limits are valid (CI) drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2) drm/radeon: gcc fixes for extended dpm tables drm/radeon: gcc fixes for kb/kv dpm drm/radeon: gcc fixes for ci dpm drm/radeon: gcc fixes for si dpm drm/radeon: gcc fixes for ni dpm drm/radeon: gcc fixes for trinity dpm drm/radeon: gcc fixes for sumo dpm drm/radeonn: gcc fixes for rv7xx/eg/btc dpm drm/radeon: gcc fixes for rv6xx dpm drm/radeon: gcc fixes for radeon_atombios.c drm/radeon: enable UVD interrupts on CIK drm/radeon: fix init ordering for r600+ drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume radeon kms: fix uninitialised hotplug work usage in r100_irq_process() drm/radeon/audio: set up the sads on DCE3.2 asics drm/radeon: fix handling of variable sized arrays for router objects ... Conflicts: drivers/gpu/drm/i915/i915_dma.c drivers/gpu/drm/i915/i915_gem_dmabuf.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/radeon/cik.c drivers/gpu/drm/radeon/ni.c drivers/gpu/drm/radeon/r600.c
2013-08-27drm: verify vma access in TTM+GEM driversDavid Herrmann
GEM does already a good job in tracking access to gem buffers via handles and drm_vma access management. However, TTM drivers currently do not verify this during mmap(). TTM provides the verify_access() callback to test this. So fix all drivers to actually call into gem+vma to verify access instead of always returning 0. All drivers assume that user-space can only get access to TTM buffers via GEM handles. So whenever the verify_access() callback is called from ttm_bo_mmap(), the buffer must have a valid embedded gem object. This is true for all TTM+GEM drivers. But that's why this patch doesn't touch pure TTM drivers (ie, vmwgfx). v2: Switch to drm_vma_node_verify_access() to correctly return -EACCES if access was denied. Cc: Dave Airlie <airlied@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: rip out drm_core_has_MTRR checksDaniel Vetter
The new arch_phys_wc_add/del functions do the right thing both with and without MTRR support in the kernel. So we can drop these additional checks. David Herrmann suggest to also kill the DRIVER_USE_MTRR flag since it's now unused, which spurred me to do a bit a better audit of the affected drivers. David helped a lot in that. Quoting our mail discussion: On Wed, Jul 10, 2013 at 5:41 PM, David Herrmann <dh.herrmann@gmail.com> wrote: > On Wed, Jul 10, 2013 at 5:22 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote: >> On Wed, Jul 10, 2013 at 3:51 PM, David Herrmann <dh.herrmann@gmail.com> wrote: >>>> -#if __OS_HAS_MTRR >>>> -static inline int drm_core_has_MTRR(struct drm_device *dev) >>>> -{ >>>> - return drm_core_check_feature(dev, DRIVER_USE_MTRR); >>>> -} >>>> -#else >>>> -#define drm_core_has_MTRR(dev) (0) >>>> -#endif >>>> - >>> >>> That was the last user of DRIVER_USE_MTRR (apart from drivers setting >>> it in .driver_features). Any reason to keep it around? >> >> Yeah, I guess we could rip things out. Which will also force me to >> properly audit drivers for the eventual behaviour change this could >> entail (in case there's an x86 driver which did not ask for an mtrr, >> but iirc there isn't). > > david@david-mb ~/dev/kernel/linux $ for i in drivers/gpu/drm/* ; do if > test -d "$i" ; then if ! grep -q USE_MTRR -r $i ; then echo $i ; fi ; > fi ; done > drivers/gpu/drm/exynos > drivers/gpu/drm/gma500 > drivers/gpu/drm/i2c > drivers/gpu/drm/nouveau > drivers/gpu/drm/omapdrm > drivers/gpu/drm/qxl > drivers/gpu/drm/rcar-du > drivers/gpu/drm/shmobile > drivers/gpu/drm/tilcdc > drivers/gpu/drm/ttm > drivers/gpu/drm/udl > drivers/gpu/drm/vmwgfx > david@david-mb ~/dev/kernel/linux $ > > So for x86 gma500,nouveau,qxl,udl,vmwgfx don't set DRIVER_USE_MTRR. > But I cannot tell whether they break if we call arch_phys_wc_add/del, > anyway. At least nouveau seemed to work here, but it doesn't use AGP > or drm_bufs, I guess. Cool, thanks a lot for stitching together the list of drivers to look at. So for real KMS drivers it's the drives responsibility to add an mtrr if it needs one. nouvea, radeon, mgag200, i915 and vmwgfx do that already. Somehow the savage driver also ends up doing that, I have no idea why. Note that gma500 as a pure KMS driver doesn't need MTRR setup since the platforms that it supports all support PAT. So no MTRRs needed to get wc iomappings. The mtrr support in the drm core is all for legacy mappings of garts, framebuffers and registers. All legacy drivers set the USE_MTRR flag, so we're good there. All in all I think we can really just ditch this /endquote v2: Also kill DRIVER_USE_MTRR as suggested by David Herrmann v3: Rebase on top of David Herrmann's agp setup/cleanup changes. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm: remove FASYNC supportDaniel Vetter
So I've stumbled over drm_fasync and wondered what it does. Digging that up is quite a story. First I've had to read up on what this does and ended up being rather bewildered why peopled loved signals so much back in the days that they've created SIGIO just for that ... Then I wondered how this ever works, and what that strange "No-op." comment right above it should mean. After all calling the core fasync helper is pretty obviously not a noop. After reading through the kernels FASYNC implementation I've noticed that signals are only sent out to the processes attached with FASYNC by calling kill_fasync. No merged drm driver has ever done that. After more digging I've found out that the only driver that ever used this is the so called GAMMA driver. I've frankly never heard of such a gpu brand ever before. Now FASYNC seems to not have been the only bad thing with that driver, since Dave Airlie removed it from the drm driver with prejudice: commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed Author: Dave Airlie <airlied@linux.ie> Date: Sun Aug 29 12:04:35 2004 +0000 Drop GAMMA DRM from a great height ... Long story short, the drm fasync support seems to be doing absolutely nothing. And the only user of it was never merged into the upstream kernel. And we don't need any fops->fasync callback since the fcntl implementation in the kernel already implements the noop case correctly. So stop this particular cargo-cult and rip it all out. v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers (somehow I've missed that one in staging). Also drop the reference in the drm DocBook. ARM compile-fail reported by Rob Clark. v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this patch here. v4: Actually git add ... tsk. Cc: Dave Airlie <airlied@linux.ie> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <robdclark@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-19drm/ast: remove unused driver_private accessDavid Herrmann
gem_bo->driver_private is never read by ast nor DRM core. No need to set it. Besides, drm core clears it during setup, anyway. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07drm/ast: invalidate page tables when pinning a BODave Airlie
same fix as cirrus and mgag200. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-07drm/gem: create drm_gem_dumb_destroyDaniel Vetter
All the gem based kms drivers really want the same function to destroy a dumb framebuffer backing storage object. So give it to them and roll it out in all drivers. This still leaves the option open for kms drivers which don't use GEM for backing storage, but it does decently simplify matters for gem drivers. Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org> Cc: Ben Skeggs <skeggsb@gmail.com> Reviwed-by: Rob Clark <robdclark@gmail.com> Cc: Alex Deucher <alexdeucher@gmail.com> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-25drm/ttm: convert to unified vma offset managerDavid Herrmann
Use the new vma-manager infrastructure. This doesn't change any implementation details as the vma-offset-manager is nearly copied 1-to-1 from TTM. The vm_lock is moved into the offset manager so we can drop it from TTM. During lookup, we use the vma locking helpers to take a reference to the found object. In all other scenarios, locking stays the same as before. We always guarantee that drm_vma_offset_remove() is called only during destruction. Hence, helpers like drm_vma_node_offset_addr() are always safe as long as the node has a valid offset. This also drops the addr_space_offset member as it is a copy of vm_start in vma_node objects. Use the accessor functions instead. v4: - remove vm_lock - use drm_vma_offset_lock_lookup() to protect lookup (instead of vm_lock) Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Martin Peres <martin.peres@labri.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-06-28drm/ast: inline reservationsMaarten Lankhorst
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-28drm/ast: do not attempt to acquire a reservation while in an interrupt handlerMaarten Lankhorst
Mutexes should not be acquired in interrupt context. While the trylock fastpath is arguably safe on all implementations, the slowpath unlock path definitely isn't. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-31drm (ast, cirrus, mgag200, nouveau, savage, vmwgfx): Remove drm_mtrr_{add, del}Andy Lutomirski
This replaces drm_mtrr_{add,del} with arch_phys_wc_{add,del}. The interface is simplified (because the base and size parameters to drm_mtrr_del never did anything), and it no longer adds MTRRs on systems that don't need them. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-02drm/ast: deal with bo reserve fail in dirty update pathDave Airlie
Port over the mgag200 fix to ast as it suffers the same issue. On F19 testing, it was noticed we get a lot of errors in dmesg about being unable to reserve the buffer when plymouth starts, this is due to the buffer being in the process of migrating, so it makes sense we can't reserve it. In order to deal with it, this adds delayed updates for the dirty updates, when the bo is unreservable, in the normal console case this shouldn't ever happen, its just when plymouth or X is pushing the console bo to system memory. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>