summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2020-11-16gpiolib: acpi: Convert pin_index to be u16Andy Shevchenko
As specified by ACPI the pin index is 16-bit unsigned integer. Define the variable, which holds it, accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Extract acpi_request_own_gpiod() helperAndy Shevchenko
It appears that we are using similar code excerpts for ACPI OpRegion and event handling. Deduplicate those excerpts by extracting a new acpi_request_own_gpiod() helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Make acpi_gpio_to_gpiod_flags() usable for GpioInt()Andy Shevchenko
GpioInt() implies input configuration of the pin. Add this to the acpi_gpio_to_gpiod_flags() and make usable for GpioInt(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Set initial value for output pin based on bias and polarityVasile-Laurentiu Stanimir
GpioIo() resources don't contain an initial value for the output pin. Therefore instead of deducting its value solely based on bias field we should deduce that value from the polarity and the bias fields. Typical scenario is, when pin is defined in the table and its polarity, specified in _DSD or via platform code, is defined as active low, in the following call chain: -> acpi_populate_gpio_lookup() -> acpi_gpio_to_gpiod_flags() it will return GPIOD_OUT_HIGH if bias is set no matter if polarity is GPIO_ACTIVE_LOW, so it will return the current level instead of the logical level. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Move acpi_gpio_to_gpiod_flags() upper in the codeAndy Shevchenko
Move acpi_gpio_to_gpiod_flags() upper in the code to allow further refactoring. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Move non-critical code outside of critical sectionAndy Shevchenko
Mika noticed that some code is run under mutex when it doesn't require the lock, like an error code assignment. Move non-critical code outside of critical section. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Take into account debounce settingsAndy Shevchenko
We didn't take into account the debounce settings supplied by ACPI. This change is targeting the mentioned gap. Reported-by: Coiby Xu <coiby.xu@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Use named item for enum gpiod_flags variableAndy Shevchenko
Use named item instead of plain integer for enum gpiod_flags to make it clear that even 0 has its own meaning. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: acpi: Respect bias settings for GpioInt() resourceAndy Shevchenko
In some cases the GpioInt() resource is coming with bias settings which may affect system functioning. Respect bias settings for GpioInt() resource by calling acpi_gpio_update_gpiod_*flags() API in acpi_dev_gpio_irq_get(). Reported-by: Jamie McClymont <jamie@kwiius.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: Introduce gpio_set_debounce_timeout() for internal useAndy Shevchenko
In some cases we would like to have debounce setter which doesn't fail when a feature is not supported by a controller. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2020-11-16gpiolib: Extract gpio_set_config_with_argument_optional() helperAndy Shevchenko
This function is useful for internal use in the GPIO library. There will be new user coming, prepare a helper for the new comer and the existing ones. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: move bias related code from gpio_set_config() to gpio_set_bias()Andy Shevchenko
Move bias related code from gpio_set_config() to gpio_set_bias(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: Extract gpio_set_config_with_argument() for future useAndy Shevchenko
In the future we will need to have a separate function that takes an arbitrary argument value. Extract gpio_set_config_with_argument() for that purpose. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: use proper API to pack pin configuration parametersAndy Shevchenko
Instead of open coded macro use, call pinconf_to_config_packed(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: add missed break statementAndy Shevchenko
It's no difference in the functionality, but after the change the code is less error prone to various checkers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: Replace unsigned by unsigned intAndy Shevchenko
Replace unsigned by unsigned int in GPIO library code. Note, legacy API left untouched. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16gpiolib: devres: shrink devm_gpiochip_add_data_with_key()Bartosz Golaszewski
If all we want to manage is a single pointer, there's no need to manually allocate and add a new devres. We can simply use devm_add_action_or_reset() and shrink the code by a good bit. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-11Merge branch 'devel' into for-nextLinus Walleij
2020-11-11gpio: sifive: Fix SiFive gpio probeDamien Le Moal
Fix the check on the number of IRQs to allow up to the maximum (32) instead of only the maximum minus one. Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Link: https://lore.kernel.org/r/20201107081420.60325-10-damien.lemoal@wdc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-10Merge tag 'gpio-fixes-for-v5.10-rc3' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.10-rc3 - fix missing conversion to gpiolib irqchip in gpio-dwapb - fix bank properties for ast2600 variant in gpio-aspeed - make sysfs work again when the character device is disabled - fix interrupt handling in gpio-pcie-idio-24
2020-11-06gpio: tegra: Use raw_spinlockDmitry Osipenko
Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. This happens because there is a legit nested raw_spinlock->spinlock locking usage within IRQ-related code. IRQ core uses raw spinlock and then Tegra GPIO driver uses a nested spinlock. The debug code can't recognize and handle this case, hence we need to use raw spinlock in the GPIO driver. [ BUG: Invalid wait context ] ... (dump_stack) from (__lock_acquire) (__lock_acquire) from (lock_acquire) (lock_acquire) from (_raw_spin_lock_irqsave) (_raw_spin_lock_irqsave) from (tegra_gpio_irq_set_type) (tegra_gpio_irq_set_type) from (__irq_set_trigger) (__irq_set_trigger) from (__setup_irq) (__setup_irq) from (request_threaded_irq) (request_threaded_irq) from (devm_request_threaded_irq) (devm_request_threaded_irq) from (elants_i2c_probe) (elants_i2c_probe) from (i2c_device_probe) ... Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-06gpio: tegra: Add lockdep classDmitry Osipenko
Add lockdep class in order to fix debug warnings that are coming from a legit nested use of irq_set_irq_wake() by the Tegra GPIO driver. WARNING: possible recursive locking detected ... (irq_set_irq_wake) from (tegra_gpio_irq_set_wake) (tegra_gpio_irq_set_wake) from (irq_set_irq_wake) (irq_set_irq_wake) from (brcmf_sdiod_intr_register [brcmfmac]) ... Tested-by: Peter Geis <pgwipeout@gmail.com> Reported-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-06gpio: pcie-idio-24: Enable PEX8311 interruptsArnaud de Turckheim
This enables the PEX8311 internal PCI wire interrupt and the PEX8311 local interrupt input so the local interrupts are forwarded to the PCI. Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family") Cc: stable@vger.kernel.org Signed-off-by: Arnaud de Turckheim <quarium@gmail.com> Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-06gpio: pcie-idio-24: Fix IRQ Enable Register valueArnaud de Turckheim
This fixes the COS Enable Register value for enabling/disabling the corresponding IRQs bank. Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family") Cc: stable@vger.kernel.org Signed-off-by: Arnaud de Turckheim <quarium@gmail.com> Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-06gpio: pcie-idio-24: Fix irq mask when maskingArnaud de Turckheim
Fix the bitwise operation to remove only the corresponding bit from the mask. Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family") Cc: stable@vger.kernel.org Signed-off-by: Arnaud de Turckheim <quarium@gmail.com> Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-05gpiolib: fix sysfs when cdev is not selectedKent Gibson
In gpiochip_setup_dev() the call to gpiolib_cdev_register() indirectly calls device_add(). This is still required for the sysfs even when CONFIG_GPIO_CDEV is not selected in the build. Replace the stubbed functions in gpiolib-cdev.h with macros in gpiolib.c that perform the required device_add() and device_del() when CONFIG_GPIO_CDEV is not selected. Fixes: d143493c01b7 (gpiolib: make cdev a build option) Reported-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Kent Gibson <warthog618@gmail.com> Tested-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-30gpio: rcar: Implement gpio_chip.get_multiple()Geert Uytterhoeven
Add support for getting the state of multiple pins using a minimum of register reads. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-30gpio: rcar: Rework hardware features handlingGeert Uytterhoeven
Reuse gpio_rcar_info inside gpio_rcar_priv instead of duplicating the individual members, so gpio_rcar_parse_dt() can copy them in one go. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-30gpio: rcar: Align register offsetsGeert Uytterhoeven
Improve readability by aligning the offsets in the register definitions. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-30gpio: rcar: Cache gpiochip_get_data() return valueGeert Uytterhoeven
Since commit 43c54ecade400cf6 ("gpio: move the subdriver data pointer into gpio_device") changed gpiochip_get_data() to an out-of-line function, it is now worthwhile to avoid multiple calls in a row by caching its return value in a local variable. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-30gpiolib: cdev: add GPIO_V2_LINE_FLAG_EDGE_BOTH and use it in edge_irq_thread()Kent Gibson
Add GPIO_V2_LINE_FLAG_EDGE_BOTH macro and use it in edge_irq_thread() to improve readability of edge handling cases. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-29gpio: 104-idi-48: improve code indentationDeepak R Varma
Address code indentation warning messages by checkpatch script. Combine split function parameters on one line. This also resolves the "use tabs instead of space" warning by checkpatch script. Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com> Link: https://lore.kernel.org/r/20201013190212.GA85788@ubuntu204 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-29gpio: mockup: Allow probing from device treeVincent Whitchurch
Allow the mockup driver to be probed via the device tree without any module parameters, allowing it to be used to configure and test higher level drivers like the leds-gpio driver and corresponding userspace before actual hardware is available. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-28Revert "Revert "gpio: omap: Fix lost edge wake-up interrupts""Tony Lindgren
This reverts commit 579ced8fdb00b8e94304a83e3cc419f6f8eab08e. Turns out I was overly optimistic about cpu_pm blocking idle being a solution for handling edge interrupts. While it helps in preventing entering idle states that potentially lose context, we can still get an edge interrupt triggering while entering idle. So we need to also add back the workaround for seeing if there are any pending edge interrupts when waking up. Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Link: https://lore.kernel.org/r/20201028060556.56038-1-tony@atomide.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-28gpio: stmpe: Fix forgotten refactoringLinus Walleij
We actually handle the gpio_irq_chip set-up properly now despite what the comment says. Also assign this pointer along with the rest of the gpio_irq_chip setup code. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201019134429.65563-1-linus.walleij@linaro.org
2020-10-28gpio: Retire the explicit gpio irqchip codeLinus Walleij
Now that all gpiolib irqchip users have been over to use the irqchip template, we can finally retire the old code path and leave just one way in to the irqchip: set up the template when registering the gpio_chip. For a while we had two code paths for this which was a bit confusing. This brings this work to a conclusion, there is now one way of doing this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Link: https://lore.kernel.org/r/20201019134046.65101-1-linus.walleij@linaro.org
2020-10-28gpiolib: Switch to use compat_need_64bit_alignment_fixup() helperAndy Shevchenko
Use the new compat_need_64bit_alignment_fixup() helper to avoid ugly ifdeffery in IOCTL compatibility code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Kent Gibson <warthog618@gmail.com> Depends-on: 527c412519eb ("compat: add a compat_need_64bit_alignment_fixup() helper") Link: https://lore.kernel.org/r/20201014103315.82662-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-28gpiolib: Use proper type for bias enumerator in gpio_set_bias()Andy Shevchenko
First of all, bias has a special type as being a part of enum pin_config_param. Second, 0 is also defined bias which is equivalent to BUS_HOLD. Taking into account above, change type of bias variable and refactor gpio_set_bias() in a way that it doesn't use BUS_HOLD as a place holder. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20201009184359.16427-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-10-26gpio: aspeed: fix ast2600 bank propertiesBilly Tsai
GPIO_T is mapped to the most significant byte of input/output mask, and the byte in "output" mask should be 0 because GPIO_T is input only. All the other bits need to be 1 because GPIO_Q/R/S support both input and output modes. Fixes: ab4a85534c3e ("gpio: aspeed: Add in ast2600 details to Aspeed driver") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Reviewed-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-26gpio: dwapb: Fix missing conversion to GPIO-lib-based IRQ-chipJia He
Commit 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip") missed the case in dwapb_irq_set_wake(). Without this fix, probing the dwapb gpio driver will hit a error: "address between user and kernel address ranges" on a Ampere armv8a server and cause a panic. Fixes: 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip") Signed-off-by: Jia He <justin.he@arm.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-26gpiolib: split error path in gpiod_request_commit()Andy Shevchenko
For better maintenance and micro optimization split error path in the gpiod_request_commit(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-26gpiolib: Unify expectations about ->request() returned valueAndy Shevchenko
Half of the code in the GPIO library is written in an expectation that any non-zero value returned from the ->request() callback is an error code, while some code checks only for negative values. Unify expectations about ->request() returned value to be non-zero for an error and 0 for the success. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-26gpiolib: of: Use named item for enum gpiod_flags variableAndy Shevchenko
Use named item instead of plain integer for enum gpiod_flags to make it clear that even 0 has its own meaning. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-26gpiolib: cdev: document that line eflags are sharedKent Gibson
The line.eflags field is shared so document this fact and highlight it throughout using READ_ONCE() and WRITE_ONCE() accessors. Also use a local copy of the eflags in edge_irq_thread() to ensure consistent control flow even if eflags changes. This is only a defensive measure as edge_irq_thread() is currently disabled when the eflags are changed. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-26gpiolib: Extract gpiod_not_found() helperAndy Shevchenko
Several places in the code are using same idiom, i.e. IS_ERR(desc) && PTR_ERR(desc) == -ENOENT which meaning is GPIO description is not found. For better readability extract gpiod_not_found() helper and use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-14Merge tag 'mfd-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include <linux/version.h> mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...
2020-10-13Merge tag 'gpio-v5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This time very little driver changes but lots of core changes. We have some interesting cooperative work for ARM and Intel alike, making the GPIO subsystem more and more suitable for industrial systems and the like, in addition to the in-kernel users. We touch driver core (device properties) and lib/* by adding one simple string array free function, these are authored by Andy Shevchenko who is a well known and recognized core helpers maintainers so this should be fine. We also see some Android GKI-related modularization in the MXC drivers. Core changes: - The big core change is the updated (v2) userspace character device API. This corrects badly designed 64-bit alignment around the line events. We also add the debounce request feature. This echoes the often quotes passage from Frederick Brooks "The mythical man-month" to always throw one away, which we have seen before in things such as V4L2. So we put in a new one and deprecate and obsolete the old one. - All example tools in tools/gpio/* are migrated to the new API to set a good example. The libgpiod userspace library has been augmented to use this new API pretty much from day 1. - Some misc API hardening by using strn* function calls has been added as well. - Use the simpler IDA interface for GPIO chip instance enumeration. - Add device core function for counting string arrays in device properties. - Provide a generic library function kfree_strarray() that can be used throughout the kernel. Driver enhancements: - The DesignWare dwapb-gpio driver has been enhanced and now uses the IRQ handling in the gpiolib core. - The mockup and aggregator drivers have seen some substantial code clean-up and now use more of the core kernel inftrastructure. - Misc cleanups using dev_err_probe(). - The MXC drivers (Freescale/NXP) can now be built modularized, which makes modularized GKI Android kernels happy" * tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits) gpiolib: Update header block in gpiolib-cdev.h gpiolib: cdev: switch from kstrdup() to kstrndup() docs: gpio: add a new document to its index.rst gpio: pca953x: Add support for the NXP PCAL9554B/C tools: gpio: add debounce support to gpio-event-mon tools: gpio: add multi-line monitoring to gpio-event-mon tools: gpio: port gpio-event-mon to v2 uAPI tools: gpio: port gpio-hammer to v2 uAPI tools: gpio: rename nlines to num_lines tools: gpio: port gpio-watch to v2 uAPI tools: gpio: port lsgpio to v2 uAPI gpio: uapi: document uAPI v1 as deprecated gpiolib: cdev: support setting debounce gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL gpiolib: cdev: support edge detection for uAPI v2 gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL gpiolib: add build option for CDEV v1 ABI gpiolib: make cdev a build option ...
2020-10-12Merge tag 'irq-core-2020-10-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Allow trimming of interrupt hierarchy to support odd hardware setups where only a subset of the interrupts requires the full hierarchy. - Allow the retrigger mechanism to follow a hierarchy to simplify driver code. - Provide a mechanism to force enable wakeup interrrupts on suspend. - More infrastructure to handle IPIs in the core code Architectures: - Convert ARM/ARM64 IPI handling to utilize the interrupt core code. Drivers: - The usual pile of new interrupt chips (MStar, Actions Owl, TI PRUSS, Designware ICTL) - ARM(64) IPI related conversions - Wakeup support for Qualcom PDC - Prevent hierarchy corruption in the NVIDIA Tegra driver - The usual small fixes, improvements and cleanups all over the place" * tag 'irq-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits) dt-bindings: interrupt-controller: Add MStar interrupt controller irqchip/irq-mst: Add MStar interrupt controller support soc/tegra: pmc: Don't create fake interrupt hierarchy levels soc/tegra: pmc: Allow optional irq parent callbacks gpio: tegra186: Allow optional irq parent callbacks genirq/irqdomain: Allow partial trimming of irq_data hierarchy irqchip/qcom-pdc: Reset PDC interrupts during init irqchip/qcom-pdc: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag pinctrl: qcom: Set IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag genirq/PM: Introduce IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND flag pinctrl: qcom: Use return value from irq_set_wake() call pinctrl: qcom: Set IRQCHIP_SET_TYPE_MASKED and IRQCHIP_MASK_ON_SUSPEND flags ARM: Handle no IPI being registered in show_ipi_list() MAINTAINERS: Add entries for Actions Semi Owl SIRQ controller irqchip: Add Actions Semi Owl SIRQ controller dt-bindings: interrupt-controller: Add Actions SIRQ controller binding dt-bindings: dw-apb-ictl: Update binding to describe use as primary interrupt controller irqchip/dw-apb-ictl: Add primary interrupt controller support irqchip/dw-apb-ictl: Refactor priot to introducing hierarchical irq domains genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER ...
2020-10-10gpio: tegra186: Allow optional irq parent callbacksMarc Zyngier
Make the tegra186 GPIO driver resistent to variable depth interrupt hierarchy, which we are about to introduce. No functionnal change yet. Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-10-08gpiolib: Update header block in gpiolib-cdev.hAndy Shevchenko
The dev_t is defined in types.h while struct gpio_device forward declaration is missed. Take into account above and update header block in gpiolib-cdev.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20201005095622.73616-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 18:24:25 +0000