summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2016-09-08gpio: sa1100: fix irq probing for ucb1x00Russell King
ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt that it's connected to. However, commit 23393d49fb75 ("gpio: kill off set_irq_flags usage") broke this by disabling IRQ probing on GPIO interrupts. Fix this. Fixes: 23393d49fb75 ("gpio: kill off set_irq_flags usage") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-08gpio: mcp23s08: make driver depend on OF_GPIOLinus Walleij
The MCP23S08 driver certainly accesses fields inside the struct gpio_chip that are only available under CONFIG_OF_GPIO not just CONFIG_OF, so update the Kconfig and driver to reflect this. Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Phil Reid <preid@electromag.com.au> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-08Revert "gpio: include <linux/io-mapping.h> in gpiolib-of"Linus Walleij
This reverts commit 7d4defe21c682c934a19fce1ba8b54b7bde61b08. The commit was pointless, manically trembling in the dark for a solution. The real fixes are: commit 048c28c91e56 ("gpio: make any OF dependent driver depend on OF_GPIO") commit 2527ecc9195e ("gpio: Fix OF build problem on UM") Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-19gpio: make any OF dependent driver depend on OF_GPIOLinus Walleij
The drivers that depend on OF but not OF_GPIO are wreaking havoc with the autobuilders for archs that have all requirements for OF but not for OF_GPIO, particularly the UM (Usermode) arch does not have iomem (NO_IOMEM) which result in configuring GPIOLIB but without OF_GPIO which is wrong if the driver is using the .of_node of the gpiochip, which only appears with OF_GPIO. After a brief look at the drivers just depending on OF it seems most if not all of them actually require stuff from gpiolib-of so the dependency is wrong in the first place. This simply patches the Kconfig so that all GPIO drivers using OF depend on OF_GPIO rather than just OF. Cc: Rabin Vincent <rabin@rab.in> Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-19gpio: Fix OF build problem on UMLinus Walleij
The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10gpio: max730x: set gpiochip data pointer before using itChristophe Leroy
gpiochip_add_data() has to be called before calling max7301_direction_input() [ 4.389883] Unable to handle kernel paging request for data at address 0x00000018 [ 4.397282] Faulting instruction address: 0xc01a8cbc [ 4.402023] Oops: Kernel access of bad area, sig: 11 [#1] [ 4.407331] PREEMPT CMPC885 [ 4.410131] CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.5.0-gacdfdee #39 [ 4.418592] Workqueue: deferwq deferred_probe_work_func [ 4.423711] task: c60798b0 ti: c608a000 task.ti: c608a000 [ 4.429038] NIP: c01a8cbc LR: c01a8e24 CTR: c01ff028 [ 4.433953] REGS: c608bad0 TRAP: 0300 Not tainted (4.5.0-s3k-dev-gacdfdee-svn-dirty) [ 4.441847] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 33039553 XER: a000f940 [ 4.448395] DAR: 00000018 DSISR: c0000000 GPR00: c01a8e24 c608bb80 c60798b0 c60d6f6c 00000004 00000002 07de2900 00700000 GPR08: 00000000 00000000 c608a000 00001032 35039553 00000000 c002f37c c6010b64 GPR16: c6010a48 c6010a14 c6010a00 00000000 c0450000 c0453568 c0453438 c050db14 GPR24: c62662bc 00000009 ffffffaa c60d6f5d 00000001 00000000 00000000 00000000 [ 4.480371] NIP [c01a8cbc] max7301_direction_input+0x20/0x9c [ 4.485951] LR [c01a8e24] __max730x_probe+0xec/0x138 [ 4.490812] Call Trace: [ 4.493268] [c608bba0] [c01a8e24] __max730x_probe+0xec/0x138 [ 4.498878] [c608bbc0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.504895] [c608bbf0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.510489] [c608bc20] [c01cc04c] __device_attach+0x8c/0x110 [ 4.516082] [c608bc50] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.521673] [c608bc70] [c01c96c8] device_add+0x3c0/0x598 [ 4.526925] [c608bcb0] [c0200f90] spi_add_device+0x114/0x160 [ 4.532512] [c608bcd0] [c02018d0] spi_register_master+0x6e0/0x7c8 [ 4.538537] [c608bd20] [c02019fc] devm_spi_register_master+0x44/0x8c [ 4.544824] [c608bd40] [c0203854] of_fsl_spi_probe+0x458/0x57c [ 4.550587] [c608bda0] [c01cd828] platform_drv_probe+0x30/0x74 [ 4.556366] [c608bdb0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.562383] [c608bde0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.567977] [c608be10] [c01cc04c] __device_attach+0x8c/0x110 [ 4.573572] [c608be40] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.579170] [c608be60] [c01cb9b4] deferred_probe_work_func+0xa4/0xc4 [ 4.585438] [c608be80] [c0029c04] process_one_work+0x22c/0x414 [ 4.591201] [c608bea0] [c002a100] worker_thread+0x314/0x5c0 [ 4.596722] [c608bef0] [c002f444] kthread+0xc8/0xcc [ 4.601538] [c608bf40] [c000af84] ret_from_kernel_thread+0x5c/0x64 [ 4.607596] Instruction dump: [ 4.610530] 7c0803a6 bba10014 38210020 4e800020 7c0802a6 9421ffe0 38840004 bf810010 [ 4.618188] 90010024 549cf0be 83c30010 549d0f7c <813e0018> 7fc3f378 7d3f2430 57ff07fe [ 4.626041] ---[ end trace 303adb021dd4caf2 ]--- Cc: stable@vger.kernel.org fixes: 5e45e01916197 ("gpio: max730x: use gpiochip data pointer") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-26Merge tag 'gpio-v4.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.8 kernel cycle. The big news is the completion of the chardev ABI which I'm very happy about and apart from that it's an ordinary, quite busy cycle. The details are below. The patches are tested in linux-next for some time, patches to other subsystem mostly have ACKs. I got overly ambitious with configureing lines as input for IRQ lines but it turns out that some controllers have their interrupt-enable and input-enabling in orthogonal settings so the assumption that all IRQ lines are input lines does not hold. Oh well, revert and back to the drawing board with that. Core changes: - The big item is of course the completion of the character device ABI. It has now replaced and surpassed the former unmaintainable sysfs ABI: we can now hammer (bitbang) individual lines or sets of lines and read individual lines or sets of lines from userspace, and we can also register to listen to GPIO events from userspace. As a tie-in we have two new tools in tools/gpio: gpio-hammer and gpio-event-mon that illustrate the proper use of the new ABI. As someone said: the wild west days of GPIO are now over. - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB Kconfig symbols. I'm patching hexagon, openrisc, powerpc, sh, unicore, ia64 and microblaze. These are either ACKed by their maintainers or patched anyways after a grace period and no response from maintainers. Some archs (ARM) come in from their trees, and others (x86) are still not fixed, so I might send a second pull request to root it out later in this merge window, or just defer to v4.9. - The GPIO tools are moved to the tools build system. New drivers: - New driver for the MAX77620/MAX20024. - New driver for the Intel Merrifield. - Enabled PCA953x for the TI PCA9536. - Enabled PCA953x for the Intel Edison. - Enabled R8A7792 in the RCAR driver. Driver improvements: - The STMPE and F7188x now supports the .get_direction() callback. - The Xilinx driver supports setting multiple lines at once. - ACPI support for the Vulcan GPIO controller. - The MMIO GPIO driver supports device tree probing. - The Acer One 10 is supported through the _DEP ACPI attribute. Cleanups: - A major cleanup of the OF/DT support code. It is way easier to read and understand now, probably this improves performance too. - Drop a few redundant .owner assignments. - Remove CLPS711x boardfile support: we are 100% DT" * tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits) MAINTAINERS: Add INTEL MERRIFIELD GPIO entry gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata() gpio: merrifield: Protect irq_ack() and gpio_set() by lock gpio: merrifield: Introduce GPIO driver to support Merrifield gpio: intel-mid: Make it depend to X86_INTEL_MID gpio: intel-mid: Sort header block alphabetically gpio: intel-mid: Remove potentially harmful code gpio: rcar: add R8A7792 support gpiolib: remove duplicated include from gpiolib.c Revert "gpio: convince line to become input in irq helper" gpiolib: of_find_gpio(): Don't discard errors gpio: of: Allow overriding the device node gpio: free handles in fringe cases gpio: tps65218: Add platform_device_id table gpio: max77620: get gpio value based on direction gpio: lynxpoint: avoid potential warning on error path tools/gpio: add install section tools/gpio: move to tools buildsystem gpio: intel-mid: switch to devm_gpiochip_add_data() gpio: 74x164: Use spi_write() helper instead of open coding ...
2016-07-22gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata()Wei Yongjun
fwnode_handle_put() should be used when terminating device_for_each_child_node() iteration with break or return to prevent stale device node references from being left behind. Generated by Coccinelle. Fixes: 4ba8cfa79f44 ("gpio: dwapb: convert device node to fwnode") Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: merrifield: Protect irq_ack() and gpio_set() by lockAndy Shevchenko
There is a potential race when two threads do the writes to the same register in parallel. Prevent out of order in such case by protecting I/O access by spin lock. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: merrifield: Introduce GPIO driver to support MerrifieldAndy Shevchenko
Intel Merrifield platform has a special GPIO controller to drive pads when they are muxed in corresponding mode. Intel Merrifield GPIO IP is slightly different here and there in comparison to the older Intel MID platforms. These differences include in particular the shaked register offsets, specific support of level triggered interrupts and wake capable sources, as well as a pinctrl which is a separate IP. Instead of uglifying existing driver I decide to provide a new one slightly based on gpio-intel-mid.c. So, anyone can easily compare what changes are happened to be here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Brian J Wood <brian.j.wood@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: intel-mid: Make it depend to X86_INTEL_MIDAndy Shevchenko
This GPIO controller is a part of Intel MID platforms which are somehow different to pure PCs. Thus, there is no need that driver is compiled for them. Replace dependency to X86_INTEL_MID. While here, fix capitalization of MID abbreviation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: intel-mid: Sort header block alphabeticallyAndy Shevchenko
Sort the header inclusion lines by alphabetical order. While here, update Intel Copyright. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: intel-mid: Remove potentially harmful codeAndy Shevchenko
The commit d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support") doesn't look at all as a proper support for Intel Merrifield and I dare to say that it distorts the behaviour of the hardware. The register map is different on Intel Merrifield, i.e. only 6 out of 8 register have the same purpose but none of them has same location in the address space. The current case potentially harmful to existing hardware since it's poking registers on wrong offsets and may set some pin to be GPIO output when connected hardware doesn't expect such. Besides the above GPIO and pinctrl on Intel Merrifield have been located in different IP blocks. The functionality has been extended as well, i.e. added support of level interrupts, special registers for wake capable sources and thus, in my opinion, requires a completele separate driver. If someone wondering the existing gpio-intel-mid.c would be converted to actual pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do that. Fixes: d56d6b3d7d69 ("gpio: langwell: add Intel Merrifield support") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: rcar: add R8A7792 supportSergei Shtylyov
Renesas R8A7792 SoC is a member of the R-Car gen2 family, add support for its GPIO controllers. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpiolib: remove duplicated include from gpiolib.cWei Yongjun
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22gpio: tegra: don't auto-enable for COMPILE_TESTArnd Bergmann
I stumbled over a build error with COMPILE_TEST and CONFIG_OF disabled: drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe': drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node' The problem is that the newly added GPIO_TEGRA Kconfig symbol does not have a dependency on CONFIG_OF. However, there is another problem here as the driver gets enabled unconditionally whenever COMPILE_TEST is set. This fixes both problems, by making the symbol user-visible when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y. As a side-effect, it is now possible to compile-test a Tegra kernel with GPIO support disabled, which is harmless. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 4dd4dd1d2120 ("gpio: tegra: Allow compile test") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-06Revert "gpio: convince line to become input in irq helper"Linus Walleij
This reverts commit 7e7c059cb50c7c72d5a393b2c34fc57de1b01b55. I was wrong about trying to do this, as it breaks the orthogonality between gpiochips and irqchips. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-06gpiolib: of_find_gpio(): Don't discard errorsLars-Peter Clausen
Since commit dd34c37aa3e8 ("gpio: of: Allow -gpio suffix for property names") when requesting a GPIO from the devicetree gpiolib looks for properties with both the '-gpio' and the '-gpios' suffix. This was implemented by first searching for the property with the '-gpios' suffix and if that yields an error try the '-gpio' suffix. This approach has the issue that any error returned when looking for the '-gpios' suffix is silently discarded. Commit 06fc3b70f1dc ("gpio: of: Fix handling for deferred probe for -gpio suffix") partially addressed the issue by treating the EPROBE_DEFER error as a special condition. This fixed the case when the property is specified, but the GPIO provider is not ready yet. But there are other cases in which of_get_named_gpiod_flags() returns an error even though the property is specified, e.g. if the specification is incorrect. of_find_gpio() should only try to look for the property with the '-gpio' suffix if no property with the '-gpios' suffix was found. If the property was not found of_get_named_gpiod_flags() will return -ENOENT, so update the condition to abort and propagate the error to the caller in all other cases. This is important for gpiod_get_optinal() and friends to behave correctly in case the specifier contains errors. Without this patch they'll return NULL if the property uses the '-gpios' suffix and the specifier contains errors, which falsely indicates to the caller that no GPIO was specified. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-06gpio: of: Allow overriding the device nodeThierry Reding
When registering a GPIO chip, drivers can override the device tree node associated with the chip by setting the chip's ->of_node field. If set, this field is supposed to take precedence over the ->parent->of_node field, but the code doesn't actually do that. Commit 762c2e46c059 ("gpio: of: remove of_gpiochip_and_xlate() and struct gg_data") exposes this because it now no longer matches on the GPIO chip's ->of_node field, but the GPIO device's ->of_node field that is set using the procedure described above. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-05Revert "gpio: gpiolib-of: Allow compile testing"Linus Walleij
This reverts commit 1e4a80640338924b9f9fd7a121ac31d08134410a. This creates more problems than it solves right now. Compile testing needs to go in with patches fixing the problems it uncovers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-04gpio: free handles in fringe casesLinus Walleij
If we fail when copying the ioctl() struct to userspace we still need to clean up the cruft otherwise left behind or it will stay around until the issuing process terminates the file handle. Reported-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-04Revert "gpiolib: Split GPIO flags parsing and GPIO configuration"Johan Hovold
This reverts commit 923b93e451db876d1479d3e4458fce14fec31d1c. Make sure consumers do not overwrite gpio flags for pins that have already been claimed. While adding support for gpio drivers to refuse a request using unsupported flags, the order of when the requested flag was checked and the new flags were applied was reversed to that consumers could overwrite flags for already requested gpios. This not only affects device-tree setups where two drivers could request the same gpio using conflicting configurations, but also allowed user space to clear gpio flags for already claimed pins simply by attempting to export them through the sysfs interface. By for example clearing the FLAG_ACTIVE_LOW flag this way, user space could effectively change the polarity of a signal. Reverting this change obviously prevents gpio drivers from doing sanity checks on the flags in their request callbacks. Fortunately only one recently added driver (gpio-tps65218 in v4.6) appears to do this, and a follow up patch could restore this functionality through a different interface. Cc: stable <stable@vger.kernel.org> # 4.4 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-04gpio: sch: Fix Oops on module load on Asus Eee PC 1201Colin Pitrat
This fixes the issue descirbe in bug 117531 (https://bugzilla.kernel.org/show_bug.cgi?id=117531). It's a regression introduced in linux 4.5 that causes a Oops at load of gpio_sch and prevents powering off the computer. The issue is that sch_gpio_reg_set is called in sch_gpio_probe before gpio_chip data is initialized with the pointer to the sch_gpio struct. As sch_gpio_reg_set calls gpiochip_get_data, it returns NULL which causes the Oops. The patch follows Mika's advice (https://lkml.org/lkml/2016/5/9/61) and consists in modifying sch_gpio_reg_get and sch_gpio_reg_set to take a sch_gpio struct directly instead of a gpio_chip, which avoids the call to gpiochip_get_data. Thanks Mika for your patience with me :-) Cc: stable@vger.kernel.org Signed-off-by: Colin Pitrat <colin.pitrat@gmail.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-04gpio: tps65218: Add platform_device_id tableKeerthy
platform_device_id table is needed for adding the tps65218-gpio module to the mfd_cell array. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-04gpio: max77620: get gpio value based on directionVenkat Reddy Talla
Gpio direction is determined by DIRx bit of GPIO configuration register, return max77620 gpio value based on direction in or out. Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29Merge tag 'pinctrl-v4.7-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here are a bunch of fixes for pin control. Just drivers and a MAINTAINERS fixup: - Driver fixes for i.MX, single register, Tegra and BayTrail. - MAINTAINERS entry for the documentation" * tag 'pinctrl-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: baytrail: Fix mingled clock pins MAINTAINERS: belong Documentation/pinctrl.txt properly pinctrl: tegra: Fix build dependency gpio: tegra: Make lockdep class file-scoped pinctrl: single: Fix missing flush of posted write for a wakeirq pinctrl: imx: Do not treat a PIN without MUX register as an error
2016-06-23gpio: lynxpoint: avoid potential warning on error pathAndy Shevchenko
When devres API is in use we are not supposed to call plain gpiochip_remove(). Remove redundant call to gpiochip_remove(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: intel-mid: switch to devm_gpiochip_add_data()Andy Shevchenko
The error handling is not correct since the commit 3f7dbfd8eea9 ("gpio: intel-mid: switch to using gpiolib irqchip helpers"). Switch to devres API to fix the potential resource leak. Fixes: commit 3f7dbfd8eea9 ("gpio: intel-mid: switch to using gpiolib irqchip helpers") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: 74x164: Use spi_write() helper instead of open codingGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: of: factor out common code to a new helper functionMasahiro Yamada
The conversion from a DT spec to struct gpio_desc is common between of_get_named_gpiod_flags() and of_parse_own_gpio(). Factor out the common code to a new helper, of_xlate_and_get_gpiod_flags(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: of: remove of_gpiochip_and_xlate() and struct gg_dataMasahiro Yamada
The usage of gpiochip_find(&gg_data, of_gpiochip_and_xlate) is odd. Usually gpiochip_find() is used to find a gpio_chip. Here, however, the return value from gpiochip_find() is just discarded. Instead, gpiochip_find(&gg_data, of_gpiochip_and_xlate) is called for the side-effect of the match function. The match function, of_gpiochip_find_and_xlate(), fills the given struct gg_data, but a match function should be simply called to judge the matching. This commit fixes this distortion and makes the code more readable. Remove of_gpiochip_find_and_xlate() and struct gg_data. Instead, this adds a very simple helper function of_find_gpiochip_by_node(). Now, of_get_named_gpiod_flags() is implemented more straight-forward. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: of: move chip->of_gpio_n_cells checking to of_gpiochip_add()Masahiro Yamada
Do this sanity check only once when the gpio_chip is added rather than every time gpio-hog is handled. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: of: drop needless gpio_chip look-up in of_parse_own_gpio()Masahiro Yamada
This function is doing more complicated than needed. The caller of this function, of_gpiochip_scan_gpios() already knows the pointer to the gpio_chip. It can pass it to of_parse_own_gpio() instead of looking up the gpio_chip by gpiochip_find(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: of: optimize "gpios" property parsing of of_parse_own_gpio()Masahiro Yamada
Call of_property_read_u32_array() only once rather than iterating of_property_read_u32_index(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23gpio: convince line to become input in irq helperLinus Walleij
The generic IRQ helper library just checks if the IRQ line is set as input before activating it for interrupts. As we recently started to check things better with .get_dir() it turns out that it's good to try to convince the line to become an input before attempting to lock it as IRQ. Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-22Merge tag 'gpio-v4.7-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "More GPIO fixes. Most prominent the gpiod_to_irq() fix brought to my attention by Hans de Goede. The hardening patch is a consequence of the reasoning around that bug. - It was discovered that too many parts of the kernel does not respect gpiod_to_irq() returning zero for an invalid IRQ. While this gets fixed, we need to make it return negative errorcodes again. - Harden the library a bit when passed error pointers. It is a bug to use these, but let's be helpful and warn the users. - Fix an uninitialized spinlock in the 104-idi-48 driver" * tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: make library immune to error pointers gpio: make sure gpiod_to_irq() returns negative on NULL desc gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock
2016-06-22gpio: tegra: Make lockdep class file-scopedThierry Reding
Commit b546be0db955 ("gpio: tegra: Get rid of all file scoped global variables") moved all file scoped variables into the driver-private structure to allow potentially multiple instances of the driver. The change also included turning the lockdep class into a driver-private field, which doesn't work and produces error messages such as this: [ 0.142310] BUG: key ffff8000fb3f7ab0 not in .data! Make the lockdep class file-scoped again to fix this issue. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-18gpiolib: make lineevent_irq_thread staticBen Dooks
The lineevent_irq_thread is not exported, so make it static to fix the following warning: drivers/gpio/gpiolib.c:654:13: warning: symbol 'lineevent_irq_thread' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-18gpio: make the iterator point to last handleLinus Walleij
When initializing the GPIO handles, we use the iterator (i) to back off if something goes wrong. But since the iterator is also used after we pass the loop, we must decrement by one after exiting the loop so that we point at the last element in the array. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Walter Harms <wharms@bfs.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-17gpio: Allow PC/104 devices on X86_64William Breathitt Gray
With the introduction of the ISA_BUS_API Kconfig option, ISA-style drivers may be built for X86_64 architectures. This patch changes the ISA Kconfig option dependency of the PC/104 drivers to ISA_BUS_API, thus allowing them to build for X86_64 as they are expected to. Cc: Alexandre Courbot <gnurou@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-17gpio: make library immune to error pointersLinus Walleij
Most functions that take a GPIO descriptor in need to check the descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC() macro except for the gpiod_to_irq() function which needs special handling. Cc: stable@vger.kernel.org Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-17gpio: make sure gpiod_to_irq() returns negative on NULL descLinus Walleij
commit 54d77198fdfbc4f0fe11b4252c1d9c97d51a3264 ("gpio: bail out silently on NULL descriptors") doesn't work for gpiod_to_irq(): drivers assume that NULL descriptors will give negative IRQ numbers in return. It has been pointed out that returning 0 is NO_IRQ and that drivers should be amended to treat this as an error, but that is for the longer term: now let us repair the semantics. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-16gpiolib: avoid uninitialized data in gpio kfifoArnd Bergmann
gcc reports a theoretical case for returning uninitialized data in the kfifo when a GPIO interrupt happens and neither GPIOEVENT_REQUEST_RISING_EDGE nor GPIOEVENT_REQUEST_FALLING_EDGE are set: drivers/gpio/gpiolib.c: In function 'lineevent_irq_thread': drivers/gpio/gpiolib.c:683:87: error: 'ge.id' may be used uninitialized in this function [-Werror=maybe-uninitialized] This case should not happen, but to be on the safe side, let's return from the irq handler without adding data to the FIFO to ensure we can never leak stack data to user space. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15gpio: userspace ABI for reading GPIO line eventsLinus Walleij
This adds an ABI for listening to events on GPIO lines. The mechanism returns an anonymous file handle to a request to listen to a specific offset on a specific gpiochip. To fetch the stream of events from the file handle, userspace simply reads an event. - Events can be requested with the same flags as ordinary handles, i.e. open drain or open source. An ioctl() call GPIO_GET_LINEEVENT_IOCTL is issued indicating the desired line. - Events can be requested for falling edge events, rising edge events, or both. - All events are timestamped using the kernel real time nanosecond timestamp (the same as is used by IIO). - The supplied consumer label will appear in "lsgpio" listings of the lines, and in /proc/interrupts as the mechanism will request an interrupt from the gpio chip. - Events are not supported on gpiochips that do not serve interrupts (no legal .to_irq() call). The event interrupt is threaded to avoid any realtime problems. - It is possible to also directly read the current value of the registered GPIO line by issuing the same GPIOHANDLE_GET_LINE_VALUES_IOCTL as used by the line handles. Setting the value is not supported: we do not listen to events on output lines. This ABI is strongly influenced by Industrial I/O and surpasses the old sysfs ABI by providing proper precision timestamps, making it possible to set flags like open drain, and put consumer names on the GPIO lines. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15gpio: userspace ABI for reading/writing GPIO linesLinus Walleij
This adds a userspace ABI for reading and writing GPIO lines. The mechanism returns an anonymous file handle to a request to read/write n offsets from a gpiochip. This file handle in turn accepts two ioctl()s: one that reads and one that writes values to the selected lines. - Handles can be requested as input/output, active low, open drain, open source, however when you issue a request for n lines with GPIO_GET_LINEHANDLE_IOCTL, they must all have the same flags, i.e. all inputs or all outputs, all open drain etc. If a granular control of the flags for each line is desired, they need to be requested individually, not in a batch. - The GPIOHANDLE_GET_LINE_VALUES_IOCTL read ioctl() can be issued also to output lines to verify that the hardware is in the expected state. - It reads and writes up to GPIOHANDLES_MAX lines at once, utilizing the .set_multiple() call in the driver if possible, making the call efficient if several lines can be written with a single register update. The limitation of GPIOHANDLES_MAX to 64 lines is done under the assumption that we may expect hardware that can issue a transaction updating 64 bits at an instant but unlikely anything larger than that. ChangeLog v2->v3: - Use gpiod_get_value_cansleep() so we support also slowpath GPIO drivers. - Fix up the UAPI docs kerneldoc. - Allocate the anonymous fd last, so that the release function don't get called until that point of something fails. After this point, skip the errorpath. ChangeLog v1->v2: - Handle ioctl_compat() properly based on a similar patch to the other ioctl() handling code. - Use _IOWR() as we pass pointers both in and out of the ioctl() - Use kmalloc() and kfree() for the linehandled, do not try to be fancy with devm_* it doesn't work the way I thought. - Fix const-correctness on the linehandle name field. Acked-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15gpio: pca953x: enable driver on Intel EdisonAndy Shevchenko
Intel Edison board has 4 GPIO expanders PCA9555a connected to I2C bus. Add an ID to support them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15gpio: acpi: add _DEP support for Acer One 10Rui Zhang
On Acer One 10, the ACPI battery driver can not be probed because it depends on the GPIO controller as well as the I2C controller to work, Device (BATC) { Name (_HID, EisaId ("PNP0C0A") /* Control Method Battery */) ... Name (_DEP, Package (0x03) // _DEP: Dependencies { I2C1, GPO2, GPO0 }) ... } The I2C dependency also exists on other platforms and has been fixed by commit 40e7fcb19293 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA"), this patch resolves the GPIO dependency for Acer One 10. Link:https://bugzilla.kernel.org/show_bug.cgi?id=115191 Tested-by: Stace A. Zacharov <stace75@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-14gpio: f7188x: Implement get_direction.plr.vincent@gmail.com
Avoids gpiolib assumptions on initial pin direction, allowing user to observe power-on settings. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-13gpio: 104-idi-48: Fix missing spin_lock_init for ack_lockAxel Lin
Fixes: 9ae482104cb9 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-13gpio: pca953x: Fix NBANK calculation for PCA9536Vignesh R
NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and hence results in 0 banks for PCA9536 which has just 4 gpios. This is wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in NBANK(). Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>