summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2017-03-17gpio:mcp23s08 Fixed missing interruptsRobert Middleton
When an interrupt occurs on an MCP23S08 chip, the INTF register will only contain one bit as causing the interrupt. If more than two pins change at the same time on the chip, this causes one of the pins to not be reported. This patch fixes the logic for checking if a pin has changed, so that multiple pins will always cause more than one change. Cc: stable@vger.kernel.org Signed-off-by: Robert Middleton <robert.middleton@rm5248.com> Tested-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-06gpio: altera: Use handle_level_irq when configured as a level_highPhil Reid
When a threaded irq handler is chained attached to one of the gpio pins when configure for level irq the altera_gpio_irq_leveL_high_handler does not mask the interrupt while being handled by the chained irq. This resulting in the threaded irq not getting enough cycles to complete quickly enough before the irq was disabled as faulty. handle_level_irq should be used in this situation instead of handle_simple_irq. In gpiochip_irqchip_add set default handler to handle_bad_irq as per Documentation/gpio/driver.txt. Then set the correct handler in the set_type callback. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-06gpio: xgene: mark PM functions as __maybe_unusedArnd Bergmann
When CONFIG_PM_SLEEP is disabled, we get a warning about unused functions: drivers/gpio/gpio-xgene.c:155:12: warning: 'xgene_gpio_resume' defined but not used [-Wunused-function] static int xgene_gpio_resume(struct device *dev) ^~~~~~~~~~~~~~~~~ drivers/gpio/gpio-xgene.c:142:12: warning: 'xgene_gpio_suspend' defined but not used [-Wunused-function] static int xgene_gpio_suspend(struct device *dev) The warnings are harmless and can be avoided by simplifying the code and marking the functions as __maybe_unused. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-06gpio: mockup: return -EFAULT if copy_from_user() failsDan Carpenter
copy_from_user() returns the number of bytes remaining to be copied but we want to return negative error codes on failue. Fixes: 9202ba2397d1 ("gpio: mockup: implement event injecting over debugfs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-06gpio: altera-a10sr: Set gpio_chip parent propertyThor Thayer
Set the gpio_chip parent property since some recent functions such as devprop_gpiochip_set_names() can use it. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-23Merge tag 'gpio-v4.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.11 cycle Core changes: - Augment fwnode_get_named_gpiod() to configure the GPIO pin immediately after requesting it like all other APIs do. This is a treewide change also updating all users. - Pass a GPIO label down to gpiod_request() from fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI correctly reflect the current in-kernel consumer of a pin taken using this abstraction. This is a treewide change also updating all users. - Rename devm_get_gpiod_from_child() to devm_fwnode_get_gpiod_from_child() to reflect the fact that this function is operating on a fwnode object. This is a treewide change also updating all users. - Make it possible to take multiple GPIOs in a single hog of device tree hogs. - The refactorings switching GPIO chips to use the .set_config() callback using standard pin control properties and providing a backend into the pin control subsystem that were also merged into the pin control tree naturally appear here too. Testing instrumentation: - A whole slew of cleanups and improvements to the mockup GPIO driver. We now have an extended userspace test exercising the subsystem, and we can inject interrupts etc from userspace to fully test the core GPIO functionality. New drivers: - New driver for the Cortina Systems Gemini GPIO controller. - New driver for the Exar XR17V352/354/358 chips. - New driver for the ACCES PCI-IDIO-16 PCI GPIO card. Driver changes: - RCAR: set the irqchip parent device, add fine-grained runtime PM support. - pca953x: support optional RESET control line on the chip. - DaVinci: cleanups and simplifications. Add support for multiple instances. - .set_multiple() and naming of lines on more or less all of the ISA/PCI GPIO controllers. - mcp23s08: refactored to use regmap as a first step to further rewrites and modernizations" * tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits) gpio: reintroduce devm_get_gpiod_from_child() gpio: pci-idio-16: Fix PCI BAR index gpio: pci-idio-16: Fix PCI device ID code gpio: mockup: implement event injecting over debugfs gpio: mockup: add a dummy irqchip gpio: mockup: implement naming the lines gpio: mockup: code shrink gpio: mockup: readability tweaks gpio: Add GPIO support for the ACCES PCI-IDIO-16 gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper gpio: Rename devm_get_gpiod_from_child() gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error gpio: ws16c48: Add support for GPIO names gpio: gpio-mm: Add support for GPIO names gpio: 104-idio-16: Add support for GPIO names gpio: 104-idi-48: Add support for GPIO names gpio: 104-dio-48e: Add support for GPIO names gpio: ws16c48: Remove unnecessary driver_data set gpio: gpio-mm: Remove unnecessary driver_data set gpio: 104-idio-16: Remove unnecessary driver_data set ...
2017-02-13gpio: pci-idio-16: Fix PCI BAR indexWilliam Breathitt Gray
The PCI BAR0 and BAR1 for the PCI-IDIO-16 hold information for the PLX 9052 bridge chip on the device. The PCI BAR2 holds the necessary base address for I/O control of the PCI-IDIO-16. This patch corrects the PCI BAR index mismatch for the PCI-IDIO-16 GPIO driver. Fixes: 02e74fc0401a ("gpio: Add GPIO support for the ACCES PCI-IDIO-16") Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-13gpio: pci-idio-16: Fix PCI device ID codeWilliam Breathitt Gray
The ACCES PCI-IDIO-16 has a PCI device ID code of 0x0DC8. It is incorrect to use the PCI device ID code of the ACCES PCI-IIRO-8 (0x0F00). This patch fixes the said PCI device ID code mismatch. Fixes: 02e74fc0401a ("gpio: Add GPIO support for the ACCES PCI-IDIO-16") Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-13gpio: mockup: implement event injecting over debugfsBartosz Golaszewski
Create a debugfs directory for every mockup chip and a single file for every line. Writing (0 or 1) to these files allows the user to inject line events (falling or rising edge respectively). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-13gpio: mockup: add a dummy irqchipBartosz Golaszewski
Setup a dummy irqchip that will allow us to inject line events for testing purposes. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06gpio: mockup: implement naming the linesBartosz Golaszewski
In order to allow testing line lookup by name from user space, add a new boolean parameter that indicates whether we want the lines to be named. The name is created by concatenating the chip name and the line offset value. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06gpio: mockup: code shrinkBartosz Golaszewski
Moving a couple of lines around allows us to shrink the code a bit while keeping the same functionality. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06gpio: mockup: readability tweaksBartosz Golaszewski
The following patch tries to improve the readability of the mockup driver. The driver is called gpio-mockup, so add the same prefix to all functions and structures. Add some newlines and use a temporary pointer in gpio_mockup_add(). Drop the name of the direction enum and rename the enum values to better reflect their purpose. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06gpio: Add GPIO support for the ACCES PCI-IDIO-16William Breathitt Gray
The ACCES PCI-IDIO-16 device provides 32 lines of digital I/O (16 lines of optically-isolated digital inputs for AC and DC control signals, and 16 lines of solid state switch digital outputs). An interrupt is generated when any of the inputs change state (low to high or high to low). Input filter control is not supported by this driver, and input filters are deactivated by this driver. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-05Merge branch 'ib-gpiod-flags' into develLinus Walleij
2017-02-04gpio: aspeed: Remove dependence on GPIOF_* macrosAndrew Jeffery
1736f75d35e47409ad776273133d0f558a4c8253 is a (v2) patch which had unresolved review comments[1]. Address the comments by removing the use of macros from the consumer header (this patch represents the diff between v2 and v3[2]). [1] https://lkml.org/lkml/2017/1/26/337 [2] https://lkml.org/lkml/2017/1/26/786 Fixes: 1736f75d35e4 ("gpio: aspeed: Add banks Y, Z, AA, AB and AC") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-04gpio: Add the devm_fwnode_get_index_gpiod_from_child() helperBoris Brezillon
devm_fwnode_get_gpiod_from_child() currently allows GPIO users to request a GPIO that is defined in a child fwnode instead of directly in the device fwnode. Extend this API by adding the devm_fwnode_get_index_gpiod_from_child() helper which does the same except you can also specify an index in case the 'xx-gpios' property describe several GPIOs. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-04gpio: Rename devm_get_gpiod_from_child()Boris Brezillon
Rename devm_get_gpiod_from_child() into devm_fwnode_get_gpiod_from_child() to reflect the fact that this function is operating on a fwnode object. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-04gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build errorAxel Lin
This driver now using devm_regmap_init/devm_regmap_init_i2c, so it needs to select REGMAP/REGMAP_I2C accordingly. Fixes: ("3d84fdb3f0b5 gpio: mcp23s08: use regmap") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: ws16c48: Add support for GPIO namesWilliam Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line names that match the manual documentation for the WinSystems WS16C48. This should make it easier for users to identify which GPIO line corresponds to a respective GPIO pin on the device. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: gpio-mm: Add support for GPIO namesWilliam Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line names that match the manual documentation for the Diamond Systems GPIO-MM. This should make it easier for users to identify which GPIO line corresponds to a respective GPIO pin on the device. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: 104-idio-16: Add support for GPIO namesWilliam Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line names that match the manual documentation for the ACCES 104-IDIO-16. This should make it easier for users to identify which GPIO line corresponds to a respective GPIO pin on the device. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: 104-idi-48: Add support for GPIO namesWilliam Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line names that match the manual documentation for the ACCES 104-IDI-48. This should make it easier for users to identify which GPIO line corresponds to a respective GPIO pin on the device. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: 104-dio-48e: Add support for GPIO namesWilliam Breathitt Gray
This patch sets the gpio_chip names option with an array of GPIO line names that match the manual documentation for the ACCES 104-DIO-48E. This should make it easier for users to identify which GPIO line corresponds to a respective GPIO pin on the device. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: ws16c48: Remove unnecessary driver_data setWilliam Breathitt Gray
Setting driver_data was necessary to access private data in the ws16c48_remove function. Now that the ws16c48_remove function is gone, driver_data is no longer used. This patch removes the relevant code. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: gpio-mm: Remove unnecessary driver_data setWilliam Breathitt Gray
Setting driver_data was necessary to access private data in the gpiomm_remove function. Now that the gpiomm_remove function is gone, driver_data is no longer used. This patch removes the relevant code. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: 104-idio-16: Remove unnecessary driver_data setWilliam Breathitt Gray
Setting driver_data was necessary to access private data in the idio_16_remove function. Now that the idio_16_remove function is gone, driver_data is no longer used. This patch removes the relevant code. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: 104-idi-48: Remove unnecessary driver_data setWilliam Breathitt Gray
Setting driver_data was necessary to access private data in the idi_48_remove function. Now that the idi_48_remove function is gone, driver_data is no longer used. This patch removes the relevant code. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-01gpio: 104-dio-48e: Remove unnecessary driver_data setWilliam Breathitt Gray
Setting driver_data was necessary to access private data in the dio48e_remove function. Now that the dio48e_remove function is gone, driver_data is no longer used. This patch removes the relevant code. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-31gpiolib: Fix a WARN_ON that can never triggerChristophe JAILLET
"if (!x) WARN_ON(x)" can never trigger. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30gpio: mcp23s08: use regmapSebastian Reichel
Use regmap API to save some lines of codes and have debugfs support for all of the MCP's registers. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30Merge tag 'v4.10-rc6' into develLinus Walleij
Linux 4.10-rc6 Resolved conflicts in: drivers/pinctrl/pinctrl-amd.c drivers/pinctrl/samsung/pinctrl-exynos.c
2017-01-26gpio: ws16c48: Utilize devm_ functions in driver probe callbackWilliam Breathitt Gray
The devm_ resource manager functions allow memory to be automatically released when a device is unbound. This patch takes advantage of the resource manager functions and replaces the gpiochip_add_data call and request_irq call with the devm_gpiochip_add_data call and devm_request_irq call respectively. In addition, the ws16c48_remove function has been removed as no longer necessary due to the use of the relevant devm_ resource manager functions. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: gpio-mm: Utilize devm_ functions in driver probe callbackWilliam Breathitt Gray
The devm_ resource manager functions allow memory to be automatically released when a device is unbound. This patch takes advantage of the resource manager functions and replaces the gpiochip_add_data call with the devm_gpiochip_add_data call. In addition, the gpiomm_remove function has been removed as no longer necessary due to the use of the relevant devm_ resource manager functions. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: 104-idio-16: Utilize devm_ functions in driver probe callbackWilliam Breathitt Gray
The devm_ resource manager functions allow memory to be automatically released when a device is unbound. This patch takes advantage of the resource manager functions and replaces the gpiochip_add_data call and request_irq call with the devm_gpiochip_add_data call and devm_request_irq call respectively. In addition, the idio_16_remove function has been removed as no longer necessary due to the use of the relevant devm_ resource manager functions. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: 104-idi-48: Utilize devm_ functions in driver probe callbackWilliam Breathitt Gray
The devm_ resource manager functions allow memory to be automatically released when a device is unbound. This patch takes advantage of the resource manager functions and replaces the gpiochip_add_data call and request_irq call with the devm_gpiochip_add_data call and devm_request_irq call respectively. In addition, the idi_48_remove function has been removed as no longer necessary due to the use of the relevant devm_ resource manager functions. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: 104-dio-48e: Utilize devm_ functions in driver probe callbackWilliam Breathitt Gray
The devm_ resource manager functions allow memory to be automatically released when a device is unbound. This patch takes advantage of the resource manager functions and replaces the gpiochip_add_data call and request_irq call with the devm_gpiochip_add_data call and devm_request_irq call respectively. In addition, the dio48e_remove function has been removed as no longer necessary due to the use of the relevant devm_ resource manager functions. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26Merge branch 'ib-pinctrl-genprops' of /home/linus/linux-pinctrl into develLinus Walleij
2017-01-26Merge branch 'ib-pinctrl-genprops' into develLinus Walleij
2017-01-26pinctrl / gpio: Introduce .set_config() callback for GPIO chipsMika Westerberg
Currently we already have two pin configuration related callbacks available for GPIO chips .set_single_ended() and .set_debounce(). In future we expect to have even more, which does not scale well if we need to add yet another callback to the GPIO chip structure for each possible configuration parameter. Better solution is to reuse what we already have available in the generic pinconf. To support this, we introduce a new .set_config() callback for GPIO chips. The callback takes a single packed pin configuration value as parameter. This can then be extended easily beyond what is currently supported by just adding new types to the generic pinconf enum. If the GPIO driver is backed up by a pinctrl driver the GPIO driver can just assign gpiochip_generic_config() (introduced in this patch) to .set_config and that will take care configuration requests are directed to the pinctrl driver. We then convert the existing drivers over .set_config() and finally remove the .set_single_ended() and .set_debounce() callbacks. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: aspeed: Add banks Y, Z, AA, AB and ACAndrew Jeffery
This is less straight-forward than one would hope, as some banks only have 4 pins rather than 8, others are output only, yet more (W and X, already supported) are input-only, and in the case of the g4 SoC bank AC doesn't exist. Add some structs to describe the varying properties of different banks and integrate mechanisms to deny requests for unsupported configurations. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: aspeed: Make bank names stringsJoel Stanley
The Aspeed SoCs have more GPIOs than can be represented with A-Z. The documentation uses two letter names such as AA and AB, so make the names a three-character array in the bank struct to accommodate this. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: exar: add gpio for exar cardsSudip Mukherjee
Exar XR17V352/354/358 chips have 16 multi-purpose inputs/outputs which can be controlled using gpio interface. Add the gpio specific code. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: ws16c48: Add set_multiple callback function supportWilliam Breathitt Gray
The WinSystems WS16C48 provides registers where 8 lines of GPIO may be set at a time. This patch add support for the set_multiple callback function, thus allowing multiple GPIO output lines to be set more efficiently in groups. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: gpio-mm: Add set_multiple callback function supportWilliam Breathitt Gray
The Diamond Systems GPIO-MM series provides registers where 8 lines of GPIO may be set at a time. This patch add support for the set_multiple callback function, thus allowing multiple GPIO output lines to be set more efficiently in groups. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: 104-idio-16: Add set_multiple callback function supportWilliam Breathitt Gray
The ACCES 104-IDIO-16 series provides registers where 8 lines of GPIO may be set at a time. This patch add support for the set_multiple callback function, thus allowing multiple GPIO output lines to be set more efficiently in groups. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: 104-dio-48e: Add set_multiple callback function supportWilliam Breathitt Gray
The ACCES 104-DIO-48E series provides registers where 8 lines of GPIO may be set at a time. This patch add support for the set_multiple callback function, thus allowing multiple GPIO output lines to be set more efficiently in groups. Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26Merge branch 'ib-gpiod-flags' into develLinus Walleij
2017-01-26gpio: Add a driver for Cortina Systems Gemini GPIOLinus Walleij
This is a heavy edit/rewrite of the GPIO driver for the Gemini SoC from arch/arm/mach-gemini/gpio.c. This rewrite uses all the best-in-class helper like generic GPIO and GPIOLIB_IRQCHIP and has been tested on ITian Square One Gemini-based NAS/router. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio: davinci: Remove custom .xlateKeerthy
With the current redesign of driver it's not necessary to have custom .xlate() as the gpiolib will assign default of_gpio_simple_xlate(). Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>