summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpiolib-of.c
AgeCommit message (Collapse)Author
2021-03-26gpiolib: Move of_node operations to gpiolib-of and correct fwnode useAndy Shevchenko
The initial value of the OF node based on presence of parent, but at the same time this operation somehow appeared separately from others that handle the OF case. On the other hand there is no need to assign dev->fwnode in the OF case if code properly retrieves fwnode, i.e. via dev_fwnode() helper. Amend gpiolib.c and gpiolib-of.c code in order to group OF operations. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-01-27gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by defaultSaravana Kannan
There are multiple instances of GPIO device tree nodes of the form: foo { compatible = "acme,foo"; ... gpio0: gpio0@xxxxxxxx { compatible = "acme,bar"; ... gpio-controller; }; gpio1: gpio1@xxxxxxxx { compatible = "acme,bar"; ... gpio-controller; }; ... } bazz { my-gpios = <&gpio0 ...>; } Case 1: The driver for "foo" populates struct device for these gpio* nodes and then probes them using a driver that binds with "acme,bar". This driver for "acme,bar" then registers the gpio* nodes with gpiolib. This lines up with how DT nodes with the "compatible" property are typically converted to struct devices and then registered with driver core to probe them. This also allows the gpio* devices to hook into all the driver core capabilities like runtime PM, probe deferral, suspend/resume ordering, device links, etc. Case 2: The driver for "foo" doesn't populate struct devices for these gpio* nodes before registering them with gpiolib. Instead it just loops through its child nodes and directly registers the gpio* nodes with gpiolib. Drivers that follow case 2 cause problems with fw_devlink=on. This is because fw_devlink will prevent bazz from probing until there's a struct device that has gpio0 as its fwnode (because bazz lists gpio0 as a GPIO supplier). Once the struct device is available, fw_devlink will create a device link with gpio0 device as the supplier and bazz device as the consumer. After this point, since the gpio0 device will never bind to a driver, the device link will prevent bazz device from ever probing. Finding and refactoring all the instances of drivers that follow case 2 will cause a lot of code churn and it is not something that can be done in one shot. In some instances it might not even be possible to refactor them cleanly. Examples of such instances are [1] [2]. This patch works around this problem and avoids all the code churn by simply setting the fwnode of the gpio_device and creating a stub driver to bind to the gpio_device. This allows all the consumers to continue probing when the driver follows case 2. [1] - https://lore.kernel.org/lkml/20201014191235.7f71fcb4@xhacker.debian/ [2] - https://lore.kernel.org/lkml/e28e1f38d87c12a3c714a6573beba6e1@kernel.org/ Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default") Cc: Marc Zyngier <maz@kernel.org> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210122193600.1415639-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-26gpiolib: of: Use named item for enum gpiod_flags variableAndy Shevchenko
Use named item instead of plain integer for enum gpiod_flags to make it clear that even 0 has its own meaning. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-10-26gpiolib: Extract gpiod_not_found() helperAndy Shevchenko
Several places in the code are using same idiom, i.e. IS_ERR(desc) && PTR_ERR(desc) == -ENOENT which meaning is GPIO description is not found. For better readability extract gpiod_not_found() helper and use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-09-14gpiolib: generalize devprop_gpiochip_set_names() for device propertiesBartosz Golaszewski
devprop_gpiochip_set_names() is overly complicated with taking the fwnode argument (which requires using dev_fwnode() & of_fwnode_handle() in ACPI and OF GPIO code respectively). Let's just switch to using the generic device properties. This allows us to pull the code setting line names directly into gpiochip_add_data_with_key() instead of handling it separately for ACPI and OF. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-05Merge tag 'gpio-v5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.9 kernel cycle. There is nothing too exciting in it, but a new macro that fixes a build failure on a minor ARM32 platform that appeared yesterday is part of it so we better merge it. Core changes: - Introduce the for_each_requested_gpio() macro to help in dependent code all over the place. Also patch a few locations to use it while we are at it. - Split out the sysfs code into its own file. - Split out the character device code into its own file, then make a set of refactorings and improvements to this code. We are setting the stage to revamp the userspace API a bit in the next cycle. - Fix a whole slew of kerneldoc that was wrong or missing. New drivers: - The PCA953x driver now supports the PCAL9535. Driver improvements: - A host of incremental modernizations and improvements to the PCA953x driver. - Incremental improvements to the Xilinx Zynq driver. - Some improvements to the GPIO aggregator driver. - I ran all over the place switching all threaded and other drivers requesting their own IRQ while using the core GPIO IRQ helpers to pass the GPIO irq chip as a template instead of calling the explicit set-up functions. Next merge window we may retire the old code altogether" * tag 'gpio-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (97 commits) gpio: wcove: Request IRQ after all initialisation done gpio: crystalcove: Free IRQ on error path gpio: pca953x: Request IRQ after all initialisation done gpio: don't use same lockdep class for all devm_gpiochip_add_data users gpio: max732x: Use irqchip template gpio: stmpe: Move chip registration gpio: rcar: Use irqchip template gpio: regmap: fix type clash gpio: Correct kernel-doc inconsistency gpio: pci-idio-16: Use irqchip template gpio: pcie-idio-24: Use irqchip template gpio: 104-idio-16: Use irqchip template gpio: 104-idi-48: Use irqchip template gpio: 104-dio-48e: Use irqchip template gpio: ws16c48: Use irqchip template gpio: omap: improve coding style for pin config flags gpio: dln2: Use irqchip template gpio: sch: Add a blank line between declaration and code gpio: sch: changed every 'unsigned' to 'unsigned int' gpio: ich: changed every 'unsigned' to 'unsigned int' ...
2020-07-22spi: ppc4xx: Convert to use GPIO descriptorsLinus Walleij
This converts the PPC4xx SPI driver to use GPIO descriptors. The driver is already just picking some GPIOs from the device tree so the conversion is pretty straight forward. However this driver is looking form a pure "gpios" property rather than the standard binding "cs-gpios" so we need to add a new exception to the gpiolib OF parser to allow this for this driver's compatibles. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20200714072226.26071-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-08gpio: gpiolib-of: Provide documentation for of_gpio_spi_cs_get_count()Lee Jones
Descriptions for of_gpio_spi_cs_get_count()'s 2 arguments are missing. Document both 'dev' and 'con_id'. Fixes the following W=1 kernel build warnings: drivers/gpio/gpiolib-of.c:36: warning: Function parameter or member 'dev' not described in 'of_gpio_spi_cs_get_count' drivers/gpio/gpiolib-of.c:36: warning: Function parameter or member 'con_id' not described in 'of_gpio_spi_cs_get_count' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Link: https://lore.kernel.org/r/20200630133345.2232932-2-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-07Merge tag 'usb-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
2020-04-16usb: fusb302: Convert to use GPIO descriptorsLinus Walleij
This converts the FUSB302 driver to use GPIO descriptors. The conversion to descriptors per se is pretty straight-forward. In the process I discovered that: 1. The driver uses a completely undocumented device tree binding for the interrupt GPIO line, "fcs,int_n". Ooops. 2. The undocumented binding, presumably since it has not seen review, is just "fcs,int_n", lacking the compulsory "-gpios" suffix and also something that is not a good name because the "_n" implies the line is inverted which is something we handle with flags in the device tree. Ooops. 3. Possibly the driver should not be requesting the line as a GPIO and request the corresponding interrupt line by open coding, the GPIO chip is very likely doubleing as an IRQ controller and can probably provide an interrupt directly for this line with interrupts-extended = <&gpio0 ...>; 4. Possibly the IRQ should just be tagged on the I2C client node in the device tree like apparently ACPI does, as it overrides this IRQ with client->irq if that exists. But now it is too late to do much about that and as I can see this is used like this in the Pinebook which is a shipping product so let'a just contain the mess and move on. The property currently appears in: arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts Create a quirk in the GPIO OF library to allow this property specifically to be specified without the "-gpios" suffix, we have other such bindings already. Cc: Tobias Schramm <t.schramm@manjaro.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Yueyao Zhu <yueyao@google.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200415192448.305257-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-15gpiolib: of: improve gpiolib-of support of pull up/down on expandersAdam Ford
When using GPIO expanders attached to I2C ports, their set_config function needs to be passed a config setting which contains options to enable pull up or pull down bias feature. In order to set this config properly, the gpio parser needs to handle GPIO_PULL_UP and GPIO_PULL_DOWN. This patch enables the flags corresponding to GPIO_PULL_UP and GPIO_PULL_DOWN. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-02-21gpio: of: Add DT overlay support for GPIO hogsGeert Uytterhoeven
As GPIO hogs are configured at GPIO controller initialization time, adding/removing GPIO hogs in DT overlays does not work. Add support for GPIO hogs described in DT overlays by registering an OF reconfiguration notifier, to handle the addition and removal of GPIO hog subnodes to/from a GPIO controller device node. Note that when a GPIO hog device node is being removed, its "gpios" properties is no longer available, so we have to keep track of which node a hog belongs to, which is done by adding a pointer to the hog's device node to struct gpio_desc. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200220130149.26283-3-geert+renesas@glider.be Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21gpio: of: Extract of_gpiochip_add_hog()Geert Uytterhoeven
Extract the code to add all GPIO hogs of a gpio-hog node into its own function, so it can be reused. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200220130149.26283-2-geert+renesas@glider.be Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-27Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "There are no updates for the MEMSTICK subsystem this time. But note that I am also carrying a patch from the pinctrl tree, which has been shared through an immutable branch. Summary: MMC core: - Convert to reasonable timeouts for all CMD6 commands (updates for BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC - Respect f_max clock rate at card initialization - Add gpiod_toggle_active_low() API - Consolidate slot-gpio code by using gpiod_toggle_active_low() MMC host: - Add pinctrl_select_default_state() API - Consolidate pintctrl code by using pinctrl_select_default_state() - mmci: Support any block sizes for SDIO for some variants - mmci: Enable reset control for stm32_sdmmc - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it - renesas_sdhi: Add support for the r8a77961 variant - renesas_sdhi: A few minor improvements - rockchip-dw-mshc: Add support for the rk3308 variant - sdhci: Enable support for external DMA controllers - sdhci: Fixup error path when sending CMD12 - sdhci-brcmstb: Add support for 7216b0 variant - sdhci-brcmstb: Add support for command queuing (CQHCI) - sdhci-brcmstb: Add support for eMMC HS400ES mode - sdhci-msm: Add support for the sc7180 variant - sdhci-msm: Add support for command queuing (CQHCI) - sdhci-of-at91: Add support for the SAM9x60 variant - sdhci-of-at91: Improve support for tunings - sdhci-of-esdhc: A few fixups for some clock related issues - sdhci-omap: Add support for the am335x and the am437x variants - sdhci-omap: Improve support for erase operations - sdhci-omap: Add support for external DMA" * tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits) mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch() mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC mmc: sdhci-cadence: remove unneeded 'inline' marker dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308 dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml mmc: sdhci-msm: Add CQHCI support for sdhci-msm mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size mmc: sdhci-of-esdhc: fix serious issue clock is always disabled mmc: sdhci-of-esdhc: fix transfer mode register reading mmc: sdhci-brcmstb: Fix incorrect switch to HS mode mmc: sdhci-brcmstb: Add support for Command Queuing (CQE) mmc: sdhci-brcmstb: Add shutdown callback mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0 mmc: core: limit probe clock frequency to configured f_max mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message mmc: sdhci: fix an issue of mixing different types ...
2019-12-18mmc: core: Rework cd-gpio handlingMichał Mirosław
There are a few places around the code that invert inverted and possibly inverted CD line. That's really confusing. Squash them all into one place in mmc_gpiod_request_cd(). MMC_CAP2_CD_ACTIVE_HIGH is used analogously to WP line: in GPIO mode it is used only at probe time to switch polarity, for native mode it is left as is. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/db189b715596d63caf8c6a088bddc71dd69a879b.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18mmc: core: Rework wp-gpio handlingMichał Mirosław
Use MMC_CAP2_RO_ACTIVE_HIGH flag as indicator if GPIO line is to be inverted compared to DT/platform-specified polarity. The flag is not used after init in GPIO mode anyway. No functional changes intended. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/a60f563f11bbff821da2fa2949ca82922b144860.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-17Merge tag 'spi-fix-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A relatively large set of fixes here, the biggest part of it is for fallout from the GPIO descriptor rework that affected several of the devices with usable native chip select support. There's also some new PCI IDs for Intel Jasper Lake devices. The conversion to platform_get_irq() in the fsl driver is an incremental fix for build errors introduced on SPARC by the earlier fix for error handling in probe in that driver" * tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl: use platform_get_irq() instead of of_irq_to_resource() spi: nxp-fspi: Ensure width is respected in spi-mem operations spi: spi-ti-qspi: Fix a bug when accessing non default CS spi: fsl: don't map irq during probe spi: spi-cavium-thunderx: Add missing pci_release_regions() spi: sprd: Fix the incorrect SPI register gpiolib: of: Make of_gpio_spi_cs_get_count static spi: fsl: Handle the single hardwired chipselect case gpio: Handle counting of Freescale chipselects spi: fsl: Fix GPIO descriptor support spi: dw: Correct handling of native chipselect spi: cadence: Correct handling of native chipselect spi: pxa2xx: Add support for Intel Jasper Lake
2019-12-03gpiolib: of: Make of_gpio_spi_cs_get_count staticYueHaibing
Fix sparse warning: drivers/gpio/gpiolib-of.c:35:5: warning: symbol 'of_gpio_spi_cs_get_count' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191130012828.14504-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-28gpio: Handle counting of Freescale chipselectsLinus Walleij
We have a special quirk to handle the Freescale nonstandard SPI chipselect GPIOs in the gpiolib-of.c file, but it currently only handles the case where the GPIOs are actually requested (gpiod_*get()). We also need to handle that the SPI core attempts to count the GPIOs before use, and that needs a similar quirk in the OF part of the library. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Reported-by: Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20191128083718.39177-2-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-22gpio: of: Fix bogus reference to gpiod_get_count()Geert Uytterhoeven
The recommended function is called gpiod_count(), not gpiod_get_count(). Fixes: f626d6dfb7098525 ("gpio: of: Break out OF-only code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191120154521.16273-1-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-07gpiolib: No need to call gpiochip_remove_pin_ranges() twiceAndy Shevchenko
of_gpiochip_add(), when fails, calls gpiochip_remove_pin_ranges(). ADD: gpiochip_add_data_with_key() -> of_gpiochip_add() -> (ERROR path) gpiochip_remove_pin_ranges() At the same time of_gpiochip_remove() calls exactly the above mentioned function unconditionally and so does gpiochip_remove(). REMOVE: gpiochip_remove() -> gpiochip_remove_pin_ranges() of_gpiochip_remove() -> gpiochip_remove_pin_ranges() Since gpiochip_remove() calls gpiochip_remove_pin_ranges() unconditionally, we have duplicate call to the same function when it's not necessary. Move gpiochip_remove_pin_ranges() from of_gpiochip_add() to gpiochip_add() to avoid duplicate calls and be consistent with the explicit call in gpiochip_remove(). Fixes: e93fa3f24353 ("gpiolib: remove duplicate pin range code") Depends-on: f7299d441a4d ("gpio: of: Fix of_gpiochip_add() error path") Cc: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05Merge tag 'v5.4-rc6' into develLinus Walleij
Linux 5.4-rc6
2019-10-23Merge tag 'gpio-v5.5-updates-for-linus-part-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.5 - only get the second IRQ when there is more than one IRQ in mxc - move the code around in lineevent_create() for some shrinkage - fix formatting for GPIO docs - add DT binding for r8a774b1 - convert drivers that prevously used nocache ioremap() to using regular devm_platform_ioremap_resource() - remove some redundant error messages - shrink object code in 104-idi-48e - drop an unneeded warning from gpiolib-of
2019-10-18gpio: of: don't warn if ignored GPIO flag matches the behaviorLucas Stach
Some devicetrees specify the ACTIVE_LOW flag in the fixed regulator GPIO handle. While this has always been ignored, it's consistent with the behavior of the regulator binding in the absence of the "enable-active-high" DT property. It doesn't make much sense to print a user visible warning for a configuration which is consistent, so only print the warning if the GPIO flag contradicts the behavior dictated by by the enable-active-high property. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [Bartosz: coding style tweak] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-10-09gpio: fix kernel-doc for of_gpio_need_valid_mask()Randy Dunlap
Fix kernel-doc for of_gpio_need_valid_mask(). Fixes this warning and uses correct Return: format. ../drivers/gpio/gpiolib-of.c:92: warning: Excess function parameter 'dev' description in 'of_gpio_need_valid_mask' Fixes: f626d6dfb709 ("gpio: of: Break out OF-only code") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: linux-gpio@vger.kernel.org Link: https://lore.kernel.org/r/6c5d22c8-6e27-3314-9c46-701d932b11a6@infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-01gpio: fix getting nonexclusive gpiods from DTMarco Felsch
Since commit ec757001c818 ("gpio: Enable nonexclusive gpiods from DT nodes") we are able to get GPIOD_FLAGS_BIT_NONEXCLUSIVE marked gpios. Currently the gpiolib uses the wrong flags variable for the check. We need to check the gpiod_flags instead of the of_gpio_flags else we return -EBUSY for GPIOD_FLAGS_BIT_NONEXCLUSIVE marked and requested gpiod's. Fixes: ec757001c818 gpio: Enable nonexclusive gpiods from DT nodes Cc: stable@vger.kernel.org Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> [Bartosz: the function was moved to gpiolib-of.c so updated the patch] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-09-16Merge tag 'gpio-v5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of changes in the GPIO subsystem for the v5.4 kernel cycle. Core changes: - Support hierarchical GPIO irqchips. We now have three consumers that can use this: Intel IXP4xx, ThunderX and Qualcomm SPMI GPIO (in the pinctrl subsystem). The support code has been long in the making and hashed out so it should be easily adaptable for all hierarchical irqchip parents. The code only gets compiled in if hierarchical irqchip is used at the topmost irq controller at least, as the hierarchical irqchip requires strict hierarchy all the way up in the system. - Determine the need for a "valid_mask" for GPIO lines on the gpio_chip and conversely for the "valid_mask" for the GPIO interrupt chip interrupt lines by looking for a .init_valid_mask() callback in the main chip or GPIO interrupt chip respectively. Allocate it with bitmap_alloc(). - Isolate the device tree/open firmware GPIO description code out in its own file properly. - Isolate the ACPI GPIO description code out in its own file properly. - Drop a whole lot of #ifdef:s in the main includes: it does not hurt to keep the include items around, and we get quicker and clearer compile failures if the appropriate kernel symbols are not selected for drivers. New/deleted drivers: - New driver for Aspeed SGPIO. - The KS8695 driver is deleted as the platform gets deleted from arch/arm in this kernel cycle. - The Cirrus Logic Madera driver now supports CS47L92 and CS47L15. - The Freescale MPC8xxx now supports LS1028A and LS1088A. Driver improvements: - We pass the GPIO irqchip intialization by directly filling in the struct instead of using set-up functions (the new way) for Intel MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed, ZX, VF610, TQMX86, MT7621, Zynq and EP93xx. Out-of-band changes: - Fix a GPIO header inclusion in Unicore - no response from maintainer. - Drop FMC subsystem from MAINTAINERS - was deleted in the GPIO tree last cycle so let's mop up the shards" * tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (82 commits) gpiolib: of: add a fallback for wlf,reset GPIO name gpio: htc-egpio: Remove unused exported htc_egpio_get_wakeup_irq() gpio: remove explicit comparison with 0 gpio: creg-snps: use devm_platform_ioremap_resource() to simplify code gpio: devres: Switch to EXPORT_SYMBOL_GPL() gpio: of: Switch to EXPORT_SYMBOL_GPL() gpio: of: Make of_gpio_simple_xlate() private gpio: of: Make of_get_named_gpiod_flags() private gpio: aspeed: Add in ast2600 details to Aspeed driver gpio: aspeed: Use ngpio property from device tree if available gpio: aspeed: Setup irqchip dynamically gpio/aspeed: Fix incorrect number of banks gpio: aspeed: Update documentation with ast2600 controllers gpio: Initialize the irqchip valid_mask with a callback gpiolib: acpi: make acpi_can_fallback_to_crs() static gpio: Fix further merge errors gpio: Fix up merge collision in include file gpio: of: Normalize return code variable name gpio: gpiolib: Normalize return code variable name gpio: ep93xx: Pass irqchip when adding gpiochip ...
2019-09-12gpiolib: of: add a fallback for wlf,reset GPIO nameDmitry Torokhov
The old Arizona binding did not use -gpio or -gpios suffix, so devm_gpiod_get() does not work for it. As it is the one of a few users of devm_gpiod_get_from_of_node() API that I want to remove, I'd rather have a small quirk in the gpiolib OF handler, and switch Arizona driver to devm_gpiod_get(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20190911075215.78047-2-dmitry.torokhov@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11gpio: of: Switch to EXPORT_SYMBOL_GPL()Geert Uytterhoeven
All exported functions provide genuine Linux-specific functionality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190906084539.21838-4-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11gpio: of: Make of_gpio_simple_xlate() privateGeert Uytterhoeven
Since commit 9a95e8d25a140ba9 ("gpio: remove etraxfs driver"), there are no more users of of_gpio_simple_xlate() outside gpiolib-of.c. All GPIO drivers that need it now rely on of_gpiochip_add() setting it up as the default translate function. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190906084539.21838-3-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-11gpio: of: Make of_get_named_gpiod_flags() privateGeert Uytterhoeven
Since commit f626d6dfb7098525 ("gpio: of: Break out OF-only code"), there are no more users of of_get_named_gpiod_flags() outside gpiolib-of.c. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20190906084539.21838-2-geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-10gpiolib: of: fix fallback quirks handlingDmitry Torokhov
We should only try to execute fallback quirks handling when previous call returned -ENOENT, and not when we did not get -EPROBE_DEFER. The other errors should be treated as hard errors: we did find the GPIO description, but for some reason we failed to handle it properly. The fallbacks should only be executed when previous handlers returned -ENOENT, which means the mapping/description was not found. Also let's remove the explicit deferral handling when iterating through GPIO suffixes: it is not needed anymore as we will not be calling fallbacks for anything but -ENOENT. Fixes: df451f83e1fc ("gpio: of: fix Freescale SPI CS quirk handling") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20190903231856.GA165165@dtor-ws Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-05Merge tag 'v5.3-rc7' into develLinus Walleij
Linux 5.3-rc7
2019-09-04gpio: of: Normalize return code variable nameLinus Walleij
It is confusing to name return variables mixedly "status", "err" or "ret". I just changed them all to "ret", by personal preference, to lower cognitive stress. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190716115854.12098-1-linus.walleij@linaro.org
2019-08-17gpio: of: fix Freescale SPI CS quirk handlingAndreas Kemnade
On the gta04 we see: spi_gpio: probe of spi_lcd failed with error -2 The quirk introduced in commit e3023bf80639 ("gpio: of: Handle the Freescale SPI CS") can also be triggered by a temporary -EPROBE_DEFER and so "convert" it to a hard -ENOENT. Disable that conversion by checking for -EPROBE_DEFER. Fixes: e3023bf80639 ("gpio: of: Handle the Freescale SPI CS") Suggested-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20190816165000.32334-1-andreas@kemnade.info Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-01gpio: of: Fix hard-assigned valid_mask for OF caseStephen Boyd
The recent refactoring to break out OF code to its own file contained a bug letting the need_valid_mask be overridden by the need of the device tree range check, and if there were no ranges, but device tree was active and the reserved GPIO used in another way, things likely crash. Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <swboyd@chromium.org> Fixes: f626d6dfb709 ("gpio: of: Break out OF-only code") Reported-by: Mark Brown <broonie@kernel.org> Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-28gpio: of: Break out OF-only codeLinus Walleij
The core gpiolib should not contain any OF/device tree-only code. Try to break out the main part of it and push it down into the optional gpiolib-of.c part of the library. Create a local gpiolib-of.h header and move stuff around a bit to get a clean cut. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190717071001.3858-1-linus.walleij@linaro.org
2019-07-16Merge tag 'gpio-v5.3-rc1-fixes-for-linus' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes GPIO fixes for v5.3-rc1 - silence error messages on probe deferral in gpio-davinci - fix a memory leak in gpiolib-of - fix a potential use-after-free error in gpio-em
2019-07-16Revert "gpio/spi: Fix spi-gpio regression on active high CS"Linus Walleij
This reverts commit fbbf145a0e0a0177e089c52275fbfa55763e7d1d. It seems I was misguided in my fixup, which was working at the time but did not work on the final v5.2. The patch tried to avoid a quirk the gpiolib code not to treat "spi-gpio" CS gpios "special" by enforcing them to be active low, in the belief that since the "spi-gpio" driver was parsing the device tree on its own, it did not care to inspect the "spi-cs-high" attribute on the device nodes. That's wrong. The SPI core was inspecting them inside the of_spi_parse_dt() funtion and setting SPI_CS_HIGH on the nodes, and the driver inspected this flag when driving the line. As of now, the core handles the GPIO and it will consistently set the GPIO descriptor to 1 to enable CS, strictly requireing the gpiolib to invert it. And the gpiolib should indeed enforce active low on the CS line. Device trees should of course put the right flag on the GPIO handles, but it used to not matter. If we don't enforce active low on "gpio-gpio" we may run into ABI backward compatibility issues, so revert this. Cc: linux-spi@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190715204529.9539-1-linus.walleij@linaro.org
2019-07-15gpiolib: of: fix a memory leak in of_gpio_flags_quirks()Nishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a break from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the break. Issue found with Coccinelle. Cc: <stable@vger.kernel.org> Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-09Merge tag 'gpio-v5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the big slew of GPIO changes for the v5.3 kernel cycle. This is mostly incremental work this time. Three important things: - The FMC subsystem is deleted through my tree. This happens through GPIO as its demise was discussed in relation to a patch decoupling its GPIO implementation from the standard way of handling GPIO. As it turns out, that is not the only subsystem it reimplements and the authors think it is better do scratch it and start over using the proper kernel subsystems than try to polish the rust shiny. See the commit (ACKed by the maintainers) for details. - Arnd made a small devres patch that was ACKed by Greg and goes into the device core. - SPDX header change colissions may happen, because at times I've seen that quite a lot changed during the -rc:s in regards to SPDX. (It is good stuff, tglx has me convinced, and it is worth the occasional pain.) Apart from this is is nothing controversial or problematic. Summary: Core: - When a gpio_chip request GPIOs from itself, it can now fully control the line characteristics, both machine and consumer flags. This makes a lot of sense, but took some time before I figured out that this is how it has to work. - Several smallish documentation fixes. New drivers: - The PCA953x driver now supports the TI TCA9539. - The DaVinci driver now supports the K3 AM654 SoCs. Driver improvements: - Major overhaul and hardening of the OMAP driver by Russell King. - Starting to move some drivers to the new API passing irq_chip along with the gpio_chip when adding the gpio_chip instead of adding it separately. Unrelated: - Delete the FMC subsystem" * tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) Revert "gpio: tegra: Clean-up debugfs initialisation" gpiolib: Use spinlock_t instead of struct spinlock gpio: stp-xway: allow compile-testing gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency gpio: stp-xway: improve module clock error handling gpio: stp-xway: simplify error handling in xway_stp_probe() gpiolib: Clarify use of non-sleeping functions gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants gpiolib: Document new gpio_chip.init_valid_mask field Documentation: gpio: Fix reference to gpiod_get_array() gpio: pl061: drop duplicate printing of device name gpio: altera: Pass irqchip when adding gpiochip gpio: siox: Use devm_ managed gpiochip gpio: siox: Add struct device *dev helper variable gpio: siox: Pass irqchip when adding gpiochip drivers: gpio: amd-fch: make resource struct const devres: allow const resource arguments gpio: ath79: Pass irqchip when adding gpiochip gpio: tegra: Clean-up debugfs initialisation gpio: siox: Switch to IRQ_TYPE_NONE ...
2019-07-02gpio/spi: Fix spi-gpio regression on active high CSLinus Walleij
I ran into an intriguing bug caused by commit ""spi: gpio: Don't request CS GPIO in DT use-case" affecting all SPI GPIO devices with an active high chip select line. The commit switches the CS gpio handling over to the GPIO core, which will parse and handle "cs-gpios" from the OF node without even calling down to the driver to get the job done. However the GPIO core handles the standard bindings in Documentation/devicetree/bindings/spi/spi-controller.yaml that specifies that active high CS needs to be specified using "spi-cs-high" in the DT node. The code in drivers/spi/spi-gpio.c never respected this and never tried to inspect subnodes to see if they contained "spi-cs-high" like the gpiolib OF quirks does. Instead the only way to get an active high CS was to tag it in the device tree using the flags cell such as cs-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; This alters the quirks to not inspect the subnodes of SPI masters on "spi-gpio" for the standard attribute "spi-cs-high", making old device trees work as expected. This semantic is a bit ambigous, but just allowing the flags on the GPIO descriptor to modify polarity is what the kernel at large mostly uses so let's encourage that. Fixes: 249e2632dcd0 ("spi: gpio: Don't request CS GPIO in DT use-case") Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-12Merge branch 'ib-snps-reset-gpio' into develLinus Walleij
2019-06-12gpio: of: parse stmmac PHY reset line specific active-low propertyMartin Blumenstingl
The stmmac driver currently ignores the GPIO flags which are passed via devicetree because it operates with legacy GPIO numbers instead of GPIO descriptors. stmmac assumes that the GPIO is "active HIGH" by default. This can be overwritten by setting "snps,reset-active-low" to make the reset line "active LOW". Recent Amlogic SoCs (G12A which includes S905X2 and S905D2 as well as G12B which includes S922X) use GPIOZ_14 or GPIOZ_15 for the PHY reset line. These GPIOs are special because they are marked as "3.3V input tolerant open drain" pins which means they can only drive the pin output LOW (to reset the PHY) or to switch to input mode (to take the PHY out of reset). The GPIO subsystem already supports this with the GPIO_OPEN_DRAIN and GPIO_OPEN_SOURCE flags in the devicetree bindings. Add the stmmac PHY reset line specific active low parsing to gpiolib-of so stmmac can be ported to GPIO descriptors while being backwards compatible with device trees which use the "old" way of specifying the polarity. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-31gpio: of: Handle the Freescale SPI CSLinus Walleij
The Freescale SPI chipselects are special: while everyone else is using "cs-gpios" the Freescale platforms just use "gpios". Fix this by responding with "gpios" when asking for "cs-gpios" in a freescale device node, so we hide this pecularity from the SPI core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23gpiolib: Introduce GPIO_LOOKUP_FLAGS_DEFAULTAndy Shevchenko
Since GPIO library operates with enumerator when it's subject to handle the GPIO lookup flags, it will be better to clearly see what default means. Thus, introduce GPIO_LOOKUP_FLAGS_DEFAULT entry to describe the default assumptions. While here, replace 0 by newly introduced constant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23gpiolib: Make use of enum gpio_lookup_flags consistentAndy Shevchenko
The library uses enum gpio_lookup_flags to define the possible characteristics of GPIO pin. Since enumerator listed only individual bits the common use of it is in a form of a bitmask of gpio_lookup_flags GPIO_* values. The more correct type for this is unsigned long. Due to above convert all users to use unsigned long instead of enum gpio_lookup_flags except enumerator definition. While here, make field and parameter descriptions consistent as well. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-08gpio: of: Optimize quirk checksGeert Uytterhoeven
Simple string comparisons are cheaper than DT lookups, as the latter involve taking a spinlock and traversing properties. Hence optimize quirk checks by postponing DT lookups after string comparisons. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-03-28gpio: of: Fix of_gpiochip_add() error pathGeert Uytterhoeven
If the call to of_gpiochip_scan_gpios() in of_gpiochip_add() fails, no error handling is performed. This lead to the need of callers to call of_gpiochip_remove() on failure, which causes "BAD of_node_put() on ..." if the failure happened before the call to of_node_get(). Fix this by adding proper error handling. Note that calling gpiochip_remove_pin_ranges() multiple times causes no harm: subsequent calls are a no-op. Fixes: dfbd379ba9b7431e ("gpio: of: Return error if gpio hog configuration failed") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>