summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-pca953x.c
AgeCommit message (Collapse)Author
2018-07-02gpio: pca953x: suppress interrupts warning when not applicableBaruch Siach
Don't warn about missing interrupts support when the parent interrupt is not defined. Enabling interrupts support would not make it work anyway. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24gpio: pca953x: Include the right headerLinus Walleij
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: pca953x: fix address calculation for pcal6524H. Nikolaus Schaller
The register constants are so far defined in a way that they fit for the pcal9555a when shifted by the number of banks, i.e. are multiplied by 2 in the accessor function. Now, the pcal6524 has 3 banks which means the relative offset is multiplied by 4 for the standard registers. Simply applying the bit shift to the extended registers gives a wrong result, since the base offset is already included in the offset. Therefore, we have to add code to the 24 bit accessor functions that adjusts the register number for these exended registers. The formula finally used was developed and proposed by Andy Shevchenko <andy.shevchenko@gmail.com>. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: pca953x: define masks for addressing common and extended registersH. Nikolaus Schaller
These mask bits are to be used to map the extended register addresses (which are defined for an unsupported 8-bit pcal chip) to 16 and 24 bit chips (pcal6524). Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: pca953x: set the PCA_PCAL flag also when matching by DTH. Nikolaus Schaller
The of_device_table is missing the PCA_PCAL flag so the pcal6524 would be operated in tca6424 compatibility mode which does not handle the new interrupt mask registers. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: pca953x: Clear irq trigger type on irq shutdownGrigoryev Denis
The driver stores the result of irq_set_type() in the internal variables irq_trig_raise and irq_trig_fall, which later are used to determine the GPIOs that must be re-configured as input. These variables retain their value between gpiolib's export / unexport, resulting in an incorrect state in some cases. The corresponding bits in the variables irq_trig_raise and irq_trig_fall should be cleared in irq_shutdown(). Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pca953x: add more register definitions for pcal6524H. Nikolaus Schaller
The pcal6524 has another set of registers to fine control the interrupt handling. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pca953x: add more register definitions for pcal953xH. Nikolaus Schaller
PCAL chips ("L" seems to stand for "latched") have additional registers starting at address 0x40 to control the latches, interrupt mask, pull-up and pull down etc. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pca953x: convert register constants to hexH. Nikolaus Schaller
which makes it easier to match them with the data sheets. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16gpio: pca953x: Use of_device_get_match_data()Thierry Reding
Use of_device_get_match_data() instead of open-coding it. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27gpio: pca953x: add compatibility for pcal6524 and pcal9555aH. Nikolaus Schaller
The Pyra-Handheld originally used the tca6424 but recently we have replaced it by the pin and package compatible pcal6524. So let's add this to the bindings and the driver. And while we are at it, the pcal9555a does not have a compatible entry either but is already supported by the device id table. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: pca953x: fix vendor prefix for PCA9654Sergei Shtylyov
Despite commit 55020c8056a8 ("of: Add vendor prefix for ON Semiconductor Corp.") was made long ago, the latter commit 9f49f6dd0473 ("gpio: pca953x: add onsemi,pca9654 id") made use of another, undocumented vendor prefix. Since such prefix doesn't seem to be used in any device trees, I think we can just fix the "compatible" string in the driver and the bindings and be done with that... Fixes: 9f49f6dd0473 ("gpio: pca953x: add onsemi,pca9654 id") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: pca953x: remove incorrect le16_to_cpu callsAndy Shevchenko
i2c_smbus commands handle the correct byte order for smbus transactions internally. This will currently result in incorrect operation on big endian systems. Suggested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24gpio: move tca9554 from pcf857x to pca953xAnders Darander
The TCA9554 doesn't work with the pcf857x driver, trying to change the direction gives a NAK bailout error. TCA9554 is similar to the PCA9554, thus change the driver. Signed-off-by: Anders Darander <anders@chargestorm.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: pca953x: Expand comment for "reset" GPIO in ACPI caseAndy Shevchenko
GPIO ACPI library is going to be stricter about resources, thus, expand comment regarding "reset" GPIO resource in this driver to clarify its usage in ACPI case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: pca953x: Sort headers alphabeticallyAndy Shevchenko
For sake of better maintenance sort the headers by alphabetical order. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-23gpio: pca953x: Introduce a long awaited ->get_direction()Andy Shevchenko
Introduce ->get_direction() callback for the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Removed use of GPIOF_DIR* flags] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpio: pca953x: Add optional reset gpio controlSteve Longerbeam
Add optional reset-gpios pin control. If present, de-assert the specified reset gpio pin to bring the chip out of reset. v2: - Specify that reset signal to PCA953x chip is active low, in binding doc. - reorder includes in gpio-pca953x.c. - remove dev_err() on devm_gpiod_get_optional() error return. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-13Merge tag 'gpio-v4.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Luinus Walleij: "Bulk GPIO changes for the v4.10 kernel cycle: Core changes: - Simplify threaded interrupt handling: instead of passing numbed parameters to gpiochip_irqchip_add_chained() we create a new call: gpiochip_irqchip_add_nested() so the two types are clearly semantically different. Also make sure that all nested chips call gpiochip_set_nested_irqchip() which is necessary for IRQ resend to work properly if it happens. - Return error on seek operations for the chardev. - Clamp values set as part of gpio[d]_direction_output() so that anything != 0 will be send down to the driver as "1" not the value passed in. - ACPI can now support naming of GPIO lines, hogs and holes in the GPIO lists. New drivers: - The SX150x driver was deemed unfit for the GPIO subsystem and was moved over to a combined GPIO+pinctrl driver in the pinctrl subsystem. New features: - Various cleanups to various drivers" * tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits) gpio: merrifield: Implement gpio_get_direction callback gpio: merrifield: Add support for hardware debouncer gpio: chardev: Return error for seek operations gpio: arizona: Tidy up probe error path gpio: arizona: Remove pointless set of platform drvdata gpio: pl061: delete platform data handling gpio: pl061: move platform data into driver gpio: pl061: rename variable from chip to pl061 gpio: pl061: rename state container struct gpio: pl061: use local state for parent IRQ storage gpio: set explicit nesting on drivers gpio: simplify adding threaded interrupts gpio: vf610: use builtin_platform_driver gpio: axp209: use correct register for GPIO input status gpio: stmpe: fix interrupt handling bug gpio: em: depnd on ARCH_SHMOBILE gpio: zx: depend on ARCH_ZX gpio: x86: update config dependencies for x86 specific hardware gpio: mb86s7x: use builtin_platform_driver gpio: etraxfs: use builtin_platform_driver ...
2016-12-07Merge branch 'thread-irq-simpler' into develLinus Walleij
2016-11-25gpio: simplify adding threaded interruptsLinus Walleij
This tries to simplify the use of CONFIG_GPIOLIB_IRQCHIP when using threaded interrupts: add a new call gpiochip_irqchip_add_nested() to indicate that we're dealing with a nested rather than a chained irqchip, then create a separate gpiochip_set_nested_irqchip() to mirror the gpiochip_set_chained_irqchip() call to connect the parent and child interrupts. In the nested case gpiochip_set_nested_irqchip() does nothing more than call irq_set_parent() on each valid child interrupt, which has little semantic effect in the kernel, but this is probably still formally correct. Update all drivers using nested interrupts to use gpiochip_irqchip_add_nested() so we can now see clearly which these users are. The DLN2 driver can drop its specific hack with .irq_not_threaded as we now recognize whether a chip is threaded or not from its use of gpiochip_irqchip_add_nested() signature rather than from inspecting .can_sleep. We rename the .irq_parent to .irq_chained_parent since this parent IRQ is only really kept around for the chained interrupt handlers. Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Daniel Baluta <daniel.baluta@intel.com> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com> Cc: Semen Protsenko <semen.protsenko@globallogic.com> Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Phil Reid <preid@electromag.com.au> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08gpio: pca953x: Move memcpy into mutex lock for set multiplePhil Reid
Need to ensure that reg_output is not updated while setting multiple bits. This makes the mutex locking behaviour for the set_multiple call consistent with that of the set_value call. Cc: stable@vger.kernel.org Fixes: b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple") Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-08gpio: pca953x: Fix corruption of other gpios in set_multiple.Phil Reid
gpiod_set_array_value_complex does not clear the bits field. Therefore when the drivers set_multiple funciton is called bits outside the mask are undefined and can be either set or not. So bank_val needs to be masked with bank_mask before or with the reg_val cache. Cc: stable@vger.kernel.org Fixes: b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple") Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24gpio: pca953x: Add MAX7318 compatibleMarek Vasut
Add compatible string for the MAX7318 part. This is a two bank, 16 lines, I2C GPIO expander with interrupt line. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-11gpio: pca953x: add a comment explaining the need for a lockdep subclassBartosz Golaszewski
This is a follow-up to commit 559b46990e76 ("gpio: pca953x: fix an incorrect lockdep warning"). The reason for calling lockdep_set_subclass() in pca953x_probe() is not explained in the code. Add a comment describing the problem, partial solution and required future extensions. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-10-07Merge branch 'i2c/for-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Here is the 4.9 pull request from I2C including: - centralized error messages when registering to the core - improved lockdep annotations to prevent false positives - DT support for muxes, gates, and arbitrators - bus speeds can now be obtained from ACPI - i2c-octeon got refactored and now supports ThunderX SoCs, too - i2c-tegra and i2c-designware got a bigger bunch of updates - a couple of standard driver fixes and improvements" * 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits) i2c: axxia: disable clks in case of failure in probe i2c: octeon: thunderx: Limit register access retries i2c: uniphier-f: fix misdetection of incomplete STOP condition gpio: pca953x: variable 'id' was used twice i2c: i801: Add support for Kaby Lake PCH-H gpio: pca953x: fix an incorrect lockdep warning i2c: add a warning to i2c_adapter_depth() lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible i2c: export i2c_adapter_depth() i2c: rk3x: Fix variable 'min_total_ns' unused warning i2c: rk3x: Fix sparse warning i2c / ACPI: Do not touch an I2C device if it belongs to another adapter i2c: octeon: Fix high-level controller status check i2c: octeon: Avoid sending STOP during recovery i2c: octeon: Fix set SCL recovery function i2c: rcar: add support for r8a7796 (R-Car M3-W) i2c: imx: make bus recovery through pinctrl optional i2c: meson: add gxbb compatible string i2c: uniphier-f: set the adapter to master mode when probing i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path ...
2016-09-24gpio: pca953x: variable 'id' was used twiceWolfram Sang
sparse rightfully said: drivers/gpio/gpio-pca953x.c:771:45: warning: symbol 'id' shadows an earlier one drivers/gpio/gpio-pca953x.c:742:36: originally declared here So, name them explicitly 'i2c_id' and 'acpi_id' to avoid any confusion. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-24gpio: pca953x: fix an incorrect lockdep warningBartosz Golaszewski
If an I2C GPIO multiplexer is driven by a GPIO provided by an expander when there's a second expander using the same device driver on one of the I2C bus segments, lockdep prints a deadlock warning when trying to set the direction or the value of the GPIOs provided by the second expander. The below diagram presents the setup: - - - - - ------- --------- Bus segment 1 | | | | | |--------------- Devices | | SCL/SDA | | | | | Linux |-----------| I2C MUX | - - - - - | | | | | Bus segment 2 | | | | |------------------- ------- | --------- | | | - - - - - ------------ | MUX GPIO | | | | | Devices | GPIO | | | | | Expander 1 |---- - - - - - | | | ------------ | SCL/SDA | ------------ | | | GPIO | | Expander 2 | | | ------------ The reason for lockdep warning is that we take the chip->i2c_lock in pca953x_gpio_set_value() or pca953x_gpio_direction_output() and then come right back to pca953x_gpio_set_value() when the GPIO mux kicks in. The locks actually protect different expanders, but for lockdep both are of the same class, so it says: Possible unsafe locking scenario: CPU0 ---- lock(&chip->i2c_lock); lock(&chip->i2c_lock); *** DEADLOCK *** May be due to missing lock nesting notation In order to get rid of the warning, retrieve the adapter nesting depth and use it as lockdep subclass for chip->i2c_lock. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-13Revert "gpio: pca953x: initialize ret to zero to avoid returning garbage"Linus Walleij
This reverts commit 313b9a9938bf4076425741121d5d766826793e5d. This was already fixed by commit bf62efeb164343916ebb89dca6dfe5e6b6751700 "gpio: pca954x: fix undefined error code from remove" The latter is a better fix since it makes it easier to detect erronous code by not assigning a default error code. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: initialize ret to zero to avoid returning garbageColin Ian King
ret is not initialized so it contains garbage. Ensure garbage is not returned in the case that pdata && pdata->teardown is false by initializing ret to 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: coding style fixesBartosz Golaszewski
pca953x_gpio_set_multiple() has some coding style issues that make it harder to read. Tweak the code a bit. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: remove an unused variableBartosz Golaszewski
The chip_type variable in struct pca953x_chip is no longer required. Remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: refactor pca953x_read_regs()Bartosz Golaszewski
Avoid the unnecessary if-else in pca953x_read_regs() by spltting the routine into smaller, specialized functions and calling the right one via a function pointer held in struct pca953x. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: refactor pca953x_write_regs()Bartosz Golaszewski
Avoid the unnecessary if-else in pca953x_write_regs() by splitting the routine into smaller, specialized functions and calling the right one via a function pointer held in struct pca953x_chip. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12gpio: pca953x: code shrinkBartosz Golaszewski
There are multiple places in the driver code where a switch (chip->chip_type) is used to determine the proper register offset. Unduplicate the code by adding a simple structure holding the possible offsets that differ between the pca953x and pca957x chip families and use it to avoid the checks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07gpio: pca954x: fix undefined error code from removeArnd Bergmann
The recent addition of the regulator support has led to the pca953x_remove function returning uninitialized data when no platform data pointer is provided, as gcc warns when using -Wmaybe-uninitialized: drivers/gpio/gpio-pca953x.c: In function 'pca953x_remove': drivers/gpio/gpio-pca953x.c:860:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This restores the previous behavior, returning 0 on success. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: e23efa311110 ("gpio: pca954x: Add vcc regulator and enable it") Acked-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-11gpio: pca954x: Add vcc regulator and enable itPhil Reid
Some i2c gpio devices are connected to a switchable power supply which needs to be enabled prior to probing the device. This patch allows the drive to enable the devices vcc regulator prior to probing. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15gpio: pca953x: enable driver on Intel EdisonAndy Shevchenko
Intel Edison board has 4 GPIO expanders PCA9555a connected to I2C bus. Add an ID to support them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-13gpio: pca953x: Fix NBANK calculation for PCA9536Vignesh R
NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and hence results in 0 banks for PCA9536 which has just 4 gpios. This is wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in NBANK(). Cc: stable@vger.kernel.org Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08gpio: pca953x: enfore type for i2c_smbus_write_word_data()Andy Shevchenko
The commit 9b8e3ec34318 ("gpio: pca953x: Use correct u16 value for register word write") fixed regression in pca953x_write_regs(). At the same time the solution introduced a sparse warning: drivers/gpio/gpio-pca953x.c:168:39: warning: incorrect type in argument 3 (different base types) drivers/gpio/gpio-pca953x.c:168:39: expected unsigned short [unsigned] [usertype] value drivers/gpio/gpio-pca953x.c:168:39: got restricted __le16 [usertype] <noident> Fix the code by enforcing the type of i2c_smbus_write_word_data() parameter. Cc: Yong Li <sdliyong@gmail.com> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-07gpio: pca953x: remove redundant assignmentsAndy Shevchenko
There are few redundant assignments of ret variable which is updated anyway. Remove them for good. While here, correct indentation of the constant definition and remove one empty line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-07gpio: pca953x: Add support for TI PCA9536Vignesh R
TI PCA9536 is 4-Bit I2C GPIO expander without interrupt support[1]. Add support for the same. [1] TRM: http://www.ti.com/lit/ds/symlink/pca9536.pdf Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-17Merge tag 'gpio-v4.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel cycle v4.7: Core infrastructural changes: - Support for natively single-ended GPIO driver stages. This means that if the hardware has registers to configure open drain or open source configuration, we use that rather than (as we did before) try to emulate it by switching the line to an input to get high impedance. This is also documented throughly in Documentation/gpio/driver.txt for those of you who did not understand one word of what I just wrote. - Start to do away with the unnecessarily complex and unitelligible ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from the time when the GPIO subsystem was unmaintained. Archs can now just select GPIOLIB and be done with it, cleanups to arches will trickle in for the next kernel. Some minor archs ACKed the changes immediately so these are included in this pull request. - Advancing the use of the data pointer inside the GPIO device for storing driver data by switching the PowerPC, Super-H Unicore and a few other subarches or subsystem drivers in ALSA SoC, Input, serial, SSB, staging etc to use it. - The initialization now reads the input/output state of the GPIO lines, so that each GPIO descriptor knows - if this callback is implemented - whether the line is input or output. This also reflects nicely in userspace "lsgpio". - It is now possible to name GPIO producer names, line names, from the device tree. (Platform data has been supported for a while). I bet we will get a similar mechanism for ACPI one of those days. This makes is possible to get sensible producer names for e.g. GPIO rails in "lsgpio" in userspace. New drivers: - New driver for the Loongson1. - The XLP driver now supports Broadcom Vulcan ARM64. - The IT87 driver now supports IT8620 and IT8628. - The PCA953X driver now supports Galileo Gen2. Driver improvements: - MCP23S08 was switched to use the gpiolib irqchip helpers and now also suppors level-triggered interrupts. - 74x164 and RCAR now supports the .set_multiple() callback - AMDPT was converted to use generic GPIO. - TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994 support the new single ended callback for open drain and in some cases open source. - Implement the .get_direction() callback for a few more drivers like PL061, Xgene. Cleanups: - Paul Gortmaker combed through the drivers and de-modularized those who are not really modules. - Move the GPIO poweroff DT bindings to the power subdir where they belong. - Rename gpio-generic.c to gpio-mmio.c, which is much more to the point. That's what it is handling, nothing more, nothing less" * tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits) MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB gpio: zevio: make it explicitly non-modular gpio: timberdale: make it explicitly non-modular gpio: stmpe: make it explicitly non-modular gpio: sodaville: make it explicitly non-modular pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms gpio: dt-bindings: add wd,mbl-gpio bindings gpio: of: make it possible to name GPIO lines gpio: make gpiod_to_irq() return negative for NO_IRQ gpio: xgene: implement .get_direction() gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver gpio: tegra: Implement gpio_get_direction callback gpio: set up initial state from .get_direction() gpio: rename gpio-generic.c into gpio-mmio.c gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case gpio: dwapb: add gpio-signaled acpi event support gpio: dwapb: convert device node to fwnode gpio: dwapb: remove name from dwapb_port_property gpio/qoriq: select IRQ_DOMAIN ...
2016-04-09gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2Yong Li
Galileo Gen2 board uses the PCAL9535 as the GPIO expansion, it is different from PCA9535 and includes interrupt mask/status registers, The current driver does not support the interrupt registers configuration, it causes some gpio pins cannot trigger interrupt events, this patch fix this issue. The original patch was submitted by Josef Ahmad <josef.ahmad@linux.intel.com> http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel-quark/tree/recipes-kernel/linux/files/0015-Quark-GPIO-1-2-quark.patch Signed-off-by: Yong Li <yong.b.li@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08gpio: pca953x: Use correct u16 value for register word writeYong Li
The current implementation only uses the first byte in val, the second byte is always 0. Change it to use cpu_to_le16 to write the two bytes into the register Cc: stable@vger.kernel.org Signed-off-by: Yong Li <sdliyong@gmail.com> Reviewed-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-16gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bitGeert Uytterhoeven
pca953x_gpio_set_multiple() divides by 4 to convert from longs to bytes, which assumes a 32-bit platform, and is not correct on 64-bit platforms. Use "sizeof(...)" instead to fix this. Cc: stable@vger.kernel.org Fixes: b4818afeacbd8182 ("gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23gpio: pca953x: Use devm_gpiochip_add_data() for gpio registrationLaxman Dewangan
Use devm_gpiochip_add_data() for GPIO registration. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
2016-01-05gpio: pca953x: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Toby Smith <toby@tismith.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-10gpio: pca953x: Add set_multiple to allow multiple bits to be set in one write.Phil Reid
Tested with TCA6408 / TCA6416 devices. Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 13:27:26 +0000