summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-ath79.c
AgeCommit message (Collapse)Author
2019-07-09Merge tag 'gpio-v5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the big slew of GPIO changes for the v5.3 kernel cycle. This is mostly incremental work this time. Three important things: - The FMC subsystem is deleted through my tree. This happens through GPIO as its demise was discussed in relation to a patch decoupling its GPIO implementation from the standard way of handling GPIO. As it turns out, that is not the only subsystem it reimplements and the authors think it is better do scratch it and start over using the proper kernel subsystems than try to polish the rust shiny. See the commit (ACKed by the maintainers) for details. - Arnd made a small devres patch that was ACKed by Greg and goes into the device core. - SPDX header change colissions may happen, because at times I've seen that quite a lot changed during the -rc:s in regards to SPDX. (It is good stuff, tglx has me convinced, and it is worth the occasional pain.) Apart from this is is nothing controversial or problematic. Summary: Core: - When a gpio_chip request GPIOs from itself, it can now fully control the line characteristics, both machine and consumer flags. This makes a lot of sense, but took some time before I figured out that this is how it has to work. - Several smallish documentation fixes. New drivers: - The PCA953x driver now supports the TI TCA9539. - The DaVinci driver now supports the K3 AM654 SoCs. Driver improvements: - Major overhaul and hardening of the OMAP driver by Russell King. - Starting to move some drivers to the new API passing irq_chip along with the gpio_chip when adding the gpio_chip instead of adding it separately. Unrelated: - Delete the FMC subsystem" * tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) Revert "gpio: tegra: Clean-up debugfs initialisation" gpiolib: Use spinlock_t instead of struct spinlock gpio: stp-xway: allow compile-testing gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency gpio: stp-xway: improve module clock error handling gpio: stp-xway: simplify error handling in xway_stp_probe() gpiolib: Clarify use of non-sleeping functions gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants gpiolib: Document new gpio_chip.init_valid_mask field Documentation: gpio: Fix reference to gpiod_get_array() gpio: pl061: drop duplicate printing of device name gpio: altera: Pass irqchip when adding gpiochip gpio: siox: Use devm_ managed gpiochip gpio: siox: Add struct device *dev helper variable gpio: siox: Pass irqchip when adding gpiochip drivers: gpio: amd-fch: make resource struct const devres: allow const resource arguments gpio: ath79: Pass irqchip when adding gpiochip gpio: tegra: Clean-up debugfs initialisation gpio: siox: Switch to IRQ_TYPE_NONE ...
2019-06-27gpio: ath79: Pass irqchip when adding gpiochipLinus Walleij
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Take this opportunity to add a local dev pointer and use devm_gpiochip_add() so we can get rid of the remove() callback altogether. Cc: linux-mips@linux-mips.org Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-29gpio: fix meaningless return expressionzhong jiang
Fix the following sparse error: drivers/gpio/gpio-ath79.c:54:16: error: return expression in void function Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-27gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe()Wei Yongjun
platform_get_resource() may return NULL, add proper check to avoid potential NULL dereferencing. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> [albeu@free.fr: Fixed patch to apply on current tree] Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-02gpio: ath79: add missing MODULE_DESCRIPTION/LICENSEJesse Chan
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION is also added. Signed-off-by: Jesse Chan <jc@linux.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19gpio: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-16gpio: ath79: make use of raw_spinlock variantsJulia Cartwright
The ath79 gpio driver currently implements an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Aban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24gpio: ath79: Fix module autoloadJavier Martinez Canillas
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/gpio/gpio-ath79.ko | grep alias $ After this patch: $ modinfo drivers/gpio/gpio-ath79.ko | grep alias alias: of:N*T*Cqca,ar9340-gpioC* alias: of:N*T*Cqca,ar9340-gpio alias: of:N*T*Cqca,ar7100-gpioC* alias: of:N*T*Cqca,ar7100-gpio Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Aban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-15gpio: ath79: fix implicit assumption module.h is presentPaul Gortmaker
The Kconfig for this file is: drivers/gpio/Kconfig:config GPIO_ATH79 drivers/gpio/Kconfig: tristate "Atheros AR71XX/AR724X/AR913X GPIO support" ...but however it does not include module.h -- it in turn gets it from another header (gpio/driver.h) and we'd like to replace that with a forward delcaration of "struct module;" but if we do, this file will fail to compile. So we fix this first to avoid putting build failures into the bisect commit history. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: ath79: Check valid gpio count for both DT and non-DT casesAxel Lin
Move the code checking valid gpio count to cover both DT and non-DT cases. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-10gpio: ath79: Update the copyright noticeAlban Bedel
Add myself to the copyright list and remove the reference to Atheros' BSP as nothing is left of this code. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-10gpio: ath79: Add support for the interrupt controllerAlban Bedel
Add support for the interrupt controller using GPIOLIB_IRQCHIP. Both edges isn't supported by the chip and has to be emulated by switching the polarity on each interrupt. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-10gpio: ath79: Make the driver removableAlban Bedel
As we now allow the driver to be built as a module it should be removable. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-10gpio: ath79: Allow building in compile testsAlban Bedel
To allow building the driver in compile tests we must drop the dependency on asm/mach-ath79/ar71xx_regs.h. For this we replace the include with local definition of the registers needed for this driver. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-10gpio: ath79: Move to the generic GPIO driverAlban Bedel
Drop most of the code in favor of the generic MMIO GPIO driver. As the driver now depend on CONFIG_GPIO_GENERIC also add a Kconfig entry to make the driver optional. We leave the base pointer and lock in the data struct because they are needed for the IRQ support. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: ath79: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-21Merge tag 'v4.4-rc6' into develLinus Walleij
Linux 4.4-rc6
2015-12-11gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE registerAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-30gpio: use dev_get_platdata()Nizam Haider
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Nizam Haider <nijamh@cdac.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: ath79: Convert to the state container design patternAlban Bedel
Turn the ath79 driver into a true driver supporting multiple instances. While at it also removed unneed includes and make use of the BIT() macro. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-03MIPS: Remove all the uses of custom gpio.hAlban Bedel
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel <albeu@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Daniel Walter <dwalter@google.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Michael Buesch <m@bues.ch> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03MIPS: ath79: Move the GPIO driver to drivers/gpioAlban Bedel
GPIO drivers should be in drivers/gpio Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10597/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>