| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
|
|
This patch adds the approved PCI Express Device IDs for the
PF and VF for the card for D5005 PAC cards.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Port enable is not complete until ACK = 0. Change
__afu_port_enable() to guarantee that the enable process
is complete by polling for ACK == 0.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the
32-bit ARM drivers to rely on new symbol.
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From
the Linux kernel point of view these are flavors of the same
architecture so there is no need for three top-level arm64
architectures. Simplify this by merging all three architectures into
ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries.
The side effect is that the INTEL_STRATIX10_SERVICE will now be
available for both 32-bit and 64-bit Intel SoCFPGA, even though it is
used only for 64-bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI
shutdown manager IP. It can be used to safely handling the AXI traffic
on a Reconfigurable Partition when it is undergoing dynamic reconfiguration
and there by preventing system deadlock that may occur if AXI transactions
are interrupted during reconfiguration.
PR-Decoupler and AXI shutdown manager are completely different IPs.
But both the IP registers are compatible and also both belong to the
same sub-system (fpga-bridge).So using same driver for both IP's.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Use already prepared dev_err_probe() introduced by commit a787e5400a1c
("driver core: add device probe log helper").
It simplifies EPROBE_DEFER handling.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
The current code produces an error message on devm_gpiod_get() errors even
when the error is -EPROBE_DEFER, which should be silent.
This has been observed producing a significant amount of messages like:
xlnx-slave-spi spi1.1: Failed to get PROGRAM_B gpio: -517
Fix and simplify code by using the dev_err_probe() helper function.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Fixes: dd2784c01d93 ("fpga manager: xilinx-spi: check INIT_B pin during write_init")
Fixes: 061c97d13f1a ("fpga manager: Add Xilinx slave serial SPI driver")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
First set of FPGA Manager changes for 5.12-rc1
This is the first set of changes for the FPGA Manager 5.12-rc1
mergewindow.
DFL:
- Minor cleanup, constifying a static attribute group
Core:
- Minor cleanup, using DEFINE_SPINLOCK over open coding it
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-cleanup-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: fme: Constify static attribute_group structs
fpga: Use DEFINE_SPINLOCK() for spinlock
|
|
The only usage of these is to put their addresses in arrays of pointers
to const attribute_groups. Make them const to allow the compiler to put
them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This patch adds support for the Nios handshake private feature on Intel
PAC (Programmable Acceleration Card) N3000.
The Nios is the embedded processor on the FPGA card. This private feature
provides a handshake interface to FPGA Nios firmware, which receives
retimer configuration command from host and executes via an internal SPI
master (spi-altera). When Nios finishes the configuration, host takes over
the ownership of the SPI master to control an Intel MAX10 BMC (Board
Management Controller) Chip on the SPI bus.
For Nios firmware handshake part, this driver requests the retimer
configuration for Nios firmware on probe, and adds some sysfs nodes for
user to query the onboard retimer's working mode and Nios firmware
version.
For SPI part, this driver adds a spi-altera platform device as well as
the MAX10 BMC spi slave info. A spi-altera driver will be matched to
handle the following SPI work.
[mdf@kernel.org: Fixed up ABI doc kernel release]
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210107043714.991646-8-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now the dfl drivers could be made as independent modules and put in
different folders according to their functionalities. In order for
scattered dfl device drivers to include dfl bus APIs, move the
dfl bus APIs to a new header file in the public folder.
[mdf@kernel.org: Fixed up header guards to match filename]
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-7-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In order to support MODULE_DEVICE_TABLE() for dfl device driver, this
patch moves struct dfl_device_id to mod_devicetable.h
Some brief description for DFL (Device Feature List) is added to make
the DFL known to the whole kernel.
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-5-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The value of the field dfl_device.type comes from the 12 bits register
field DFH_ID according to DFL spec. So this patch changes the definition
of the type field to u16.
Also it is not necessary to illustrate the valid bits of the type field
in comments. Instead we should explicitly define the possible values in
the enumeration type for it, because they are shared by hardware spec.
We should not let the compiler decide these values.
Similar changes are also applied to dfl_device.feature_id.
This patch also fixed the MODALIAS format according to the changes
above.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-4-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A PCIe vendor specific extended capability is introduced by Intel to
specify the start of a number of DFLs.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-3-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation of looking for dfls based on a vendor specific pci
capability, move the code for the default method of finding the first
dfl at offset 0 of Bar 0 to its own function.
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-2-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the fixes in here, and this resolves a merge issue with
drivers/misc/habanalabs/common/memory.c.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify registration using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-11-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify registration using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-10-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify registration using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-9-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify registration using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-8-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify registration using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-7-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify registration using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-6-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify registration using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-5-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify registration using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-4-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Simplify registration by using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-3-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a devm_fpga_mgr_register() API that can be used to register a FPGA
Manager that was created using devm_fpga_mgr_create().
Introduce a struct fpga_mgr_devres that makes the devres
allocation a little bit more readable and gets reused for
devm_fpga_mgr_create() devm_fpga_mgr_register().
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-2-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Because dfl.c uses the 'devm_ioremap', 'devm_iounmap',
'devm_ioremap_resource', and 'devm_platform_ioremap_resource'
functions, it should depend on HAS_IOMEM.
This fixes make allyesconfig under UML (ARCH=um), which doesn't provide
HAS_IOMEM.
[mdf@kernel.org: Removed "drivers: " in commit message]
Fixes: 89eb35e810a8 ("fpga: dfl: map feature mmio resources in their own feature drivers")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201122001549.107023-2-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A new bus type "dfl" is introduced for private features which are not
initialized by DFL feature drivers (dfl-fme & dfl-afu drivers). So these
private features could be handled by separate driver modules.
DFL feature drivers (dfl-fme, dfl-port) will create DFL devices on
enumeration. DFL drivers could be registered on this bus to match these
DFL devices. They are matched by dfl type & feature_id.
[mdf@kernel.org: Add missing Documentation part to MAINTAINERS file]
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Clean up an outdated comment claiming FPGA regions implement devicetree
support for reprogramming FPGAs.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This patch makes preparation for modularization of DFL sub feature
drivers.
DFL based FPGA devices may contain some IP blocks which are already
supported by kernel, most of them are supported by platform device
drivers. We could create platform devices for these IP blocks and get them
supported by these drivers.
An important issue is that platform device drivers usually requests mmio
resources on probe. But now DFL mmio is mapped in DFL bus driver (e.g.
dfl-pci) as a whole region. Then platform device drivers for sub features
can't request their own mmio resources again. This is what the patch
trying to resolve.
This patch changes the DFL enumeration. DFL bus driver will unmap mmio
resources after first step enumeration and pass enumeration info to DFL
framework. Then DFL framework will map the mmio resources again, do 2nd
step enumeration, and also unmap the mmio resources. In this way, sub
feature drivers could then request their own mmio resources as needed.
An exception is that mmio resource of FIU headers are still mapped in DFL
bus driver. The FIU headers have some fundamental functions (sriov set,
port enable/disable) needed for DFL bus devices and other sub features.
They should not be unmapped as long as DFL bus device is alive.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
When the DONE pin does not go high after programming to confirm programming
success, the INIT_B pin provides some info on the reason. Use it if
available to provide a more explanatory error message.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Current code calls gpiod_get_value() without error checking. Should the
GPIO controller fail, execution would continue without any error message.
Fix by checking for negative error values.
Reported-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
If this routine sleeps because it was scheduled out, it might miss DONE
going asserted and consider it a timeout. This would potentially make the
code return an error even when programming succeeded. Rewrite the loop to
always check DONE after checking if timeout expired so this cannot happen
anymore.
While there, also add error checking for gpiod_get_value(). Also avoid
checking the DONE GPIO in two places, which would make the error-checking
code duplicated and more annoying.
The new loop it written to still guarantee that we apply 8 extra CCLK
cycles after DONE has gone asserted, which is required by the hardware.
Reported-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Most dev_err messages in this file have no final dot. Remove the only two
exceptions to make them consistent.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Remove comment committed by mistake.
Fixes: dd2784c01d93 ("fpga manager: xilinx-spi: check INIT_B pin during write_init")
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
The feature id is stored in a 12 bit field in DFH. So a u16 variable is
enough for feature id.
This patch changes all feature id related places to fit u16.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
When CTRL+C occurs during the process of FPGA reconfiguration, the FPGA
reconfiguration process stops and the user can't perform a new FPGA
reconfiguration properly.
Set FPGA task to be not interruptible so that the user can properly
perform FPGA reconfiguration after CTRL+C event.
Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This should resolve the merge/build issues reported when trying to
create linux-next.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager changes for 5.9-rc1
Here is the (slightly larger than usual) patch set for the 5.9-rc1 merge
window.
DFL:
- Xu's changes add support for AFU interrupt handling and puts them to
use for error handling.
- Xu's other change also adds another device-id for the Intel FPGA PAC N3000.
- John's change converts from using get_user_pages() to
pin_user_pages().
- Gustavo's patch cleans up some of the allocation by using
struct_size().
Xilinx:
- Luca's changes clean up the xilinx-spi and xilinx-slave-serial drivers
and updates the comments and dt-bindings to reflect the fact it also
supports 7 series devices.
Core:
- Tom cleaned up the fpga-bridge / fpga-mgr core by removing some
dead-stores.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: pci: add device id for Intel FPGA PAC N3000
Documentation: fpga: dfl: add descriptions for interrupt related interfaces.
fpga: dfl: afu: add AFU interrupt support
fpga: dfl: fme: add interrupt support for global error reporting
fpga: dfl: afu: add interrupt support for port error reporting
fpga: dfl: introduce interrupt trigger setting API
fpga: dfl: pci: add irq info for feature devices enumeration
fpga: dfl: parse interrupt info for feature devices on enumeration
fpga manager: xilinx-spi: check INIT_B pin during write_init
dt-bindings: fpga: xilinx-slave-serial: add optional INIT_B GPIO
fpga: Fix dead store in fpga-bridge.c
fpga: Fix dead store fpga-mgr.c
fpga: dfl: Use struct_size() in kzalloc()
fpga manager: xilinx-spi: remove unneeded, mistyped variables
fpga manager: xilinx-spi: valid for the 7 Series too
dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too
fpga: dfl: afu: convert get_user_pages() --> pin_user_pages()
|
|
When putting the port in reset, driver must wait for the soft reset
acknowledgment bit instead of the soft reset bit.
Fixes: 47c1b19c160f (fpga: dfl: afu: add port ops support)
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
This is to fix lkp cppcheck warnings:
drivers/fpga/dfl-pci.c:230:6: warning: The scope of the variable 'ret' can be reduced. [variableScope]
int ret = 0;
^
drivers/fpga/dfl-pci.c:230:10: warning: Variable 'ret' is assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Fixes: 3c2760b78f90 ("fpga: dfl: pci: fix return value of cci_pci_sriov_configure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Add PCIe Device ID for Intel FPGA PAC N3000.
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
AFU (Accelerated Function Unit) is dynamic region of the DFL based FPGA,
and always defined by users. Some DFL based FPGA cards allow users to
implement their own interrupts in AFU. In order to support this,
hardware implements a new UINT (AFU Interrupt) private feature with
related capability register which describes the number of supported
AFU interrupts as well as the local index of the interrupts for
software enumeration, and from software side, driver follows the common
DFL interrupt notification and handling mechanism, and it implements
two ioctls below for user to query number of irqs supported and set/unset
interrupt triggers.
Ioctls:
* DFL_FPGA_PORT_UINT_GET_IRQ_NUM
get the number of irqs, which is used to determine how many interrupts
UINT feature supports.
* DFL_FPGA_PORT_UINT_SET_IRQ
set/unset eventfds as AFU interrupt triggers.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Error reporting interrupt is very useful to notify users that some
errors are detected by the hardware. Once users are notified, they
could query hardware logged error states, no need to continuously
poll on these states.
This patch adds interrupt support for fme global error reporting sub
feature. It follows the common DFL interrupt notification and handling
mechanism. And it implements two ioctls below for user to query
number of irqs supported, and set/unset interrupt triggers.
Ioctls:
* DFL_FPGA_FME_ERR_GET_IRQ_NUM
get the number of irqs, which is used to determine whether/how many
interrupts fme error reporting feature supports.
* DFL_FPGA_FME_ERR_SET_IRQ
set/unset given eventfds as fme error reporting interrupt triggers.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Error reporting interrupt is very useful to notify users that some
errors are detected by the hardware. Once users are notified, they
could query hardware logged error states, no need to continuously
poll on these states.
This patch adds interrupt support for port error reporting sub feature.
It follows the common DFL interrupt notification and handling mechanism,
implements two ioctl commands below for user to query number of irqs
supported, and set/unset interrupt triggers.
Ioctls:
* DFL_FPGA_PORT_ERR_GET_IRQ_NUM
get the number of irqs, which is used to determine whether/how many
interrupts error reporting feature supports.
* DFL_FPGA_PORT_ERR_SET_IRQ
set/unset given eventfds as error interrupt triggers.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
FPGA user applications may be interested in interrupts generated by
DFL features. For example, users can implement their own FPGA
logics with interrupts enabled in AFU (Accelerated Function Unit,
dynamic region of DFL based FPGA). So user applications need to be
notified to handle these interrupts.
In order to allow userspace applications to monitor interrupts,
driver requires userspace to provide eventfds as interrupt
notification channels. Applications then poll/select on the eventfds
to get notified.
This patch introduces a generic helper functions to do eventfds binding
with given interrupts.
Sub feature drivers are expected to use XXX_GET_IRQ_NUM to query irq
info, and XXX_SET_IRQ to set eventfds for interrupts. This patch also
introduces helper functions for these 2 ioctls.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Some DFL FPGA PCIe cards (e.g. Intel FPGA Programmable Acceleration
Card) support MSI-X based interrupts. This patch allows PCIe driver
to prepare and pass interrupt resources to DFL via enumeration API.
These interrupt resources could then be assigned to actual features
which use them.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
DFL based FPGA devices could support interrupts for different purposes,
but current DFL framework only supports feature device enumeration with
given MMIO resources information via common DFL headers. This patch
introduces one new API dfl_fpga_enum_info_add_irq for low level bus
drivers (e.g. PCIe device driver) to pass its interrupt resources
information to DFL framework for enumeration, and also adds interrupt
enumeration code in framework to parse and assign interrupt resources
for enumerated feature devices and their own sub features.
With this patch, DFL framework enumerates interrupt resources for core
features, including PORT Error Reporting, FME (FPGA Management Engine)
Error Reporting and also AFU User Interrupts.
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
