| Age | Commit message (Collapse) | Author |
|---|
|
Simplify registration using new devm_fpga_mgr_register() API.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201115195127.284487-9-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the DONE pin does not go high after programming to confirm programming
success, the INIT_B pin provides some info on the reason. Use it if
available to provide a more explanatory error message.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Current code calls gpiod_get_value() without error checking. Should the
GPIO controller fail, execution would continue without any error message.
Fix by checking for negative error values.
Reported-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
If this routine sleeps because it was scheduled out, it might miss DONE
going asserted and consider it a timeout. This would potentially make the
code return an error even when programming succeeded. Rewrite the loop to
always check DONE after checking if timeout expired so this cannot happen
anymore.
While there, also add error checking for gpiod_get_value(). Also avoid
checking the DONE GPIO in two places, which would make the error-checking
code duplicated and more annoying.
The new loop it written to still guarantee that we apply 8 extra CCLK
cycles after DONE has gone asserted, which is required by the hardware.
Reported-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Most dev_err messages in this file have no final dot. Remove the only two
exceptions to make them consistent.
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Remove comment committed by mistake.
Fixes: dd2784c01d93 ("fpga manager: xilinx-spi: check INIT_B pin during write_init")
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
The INIT_B pin reports the status during startup and after the end of the
programming process. However the current driver completely ignores it.
Check the pin status during startup to make sure programming is never
started too early and also to detect any hardware issues in the FPGA
connection.
This is optional for backward compatibility. If INIT_B is not passed by
device tree, just fallback to the old udelays.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Using variables does not add readability here: parameters passed
to udelay*() are obviously in microseconds and their meaning is clear
from the context.
The type is also wrong, udelay expects an unsigned long.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
The Xilinx 7-series uses the same protocol, mention that.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 101 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add devm_fpga_mgr_create() which is the managed
version of fpga_mgr_create().
Change current FPGA manager drivers to use
devm_fpga_mgr_create()
Signed-off-by: Alan Tull <atull@kernel.org>
Suggested-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change fpga_mgr_register to not set or use drvdata. This supports
the case where a PCIe device has more than one manager.
Add fpga_mgr_create/free functions. Change fpga_mgr_register and
fpga_mgr_unregister functions to take the mgr struct as their only
parameter.
struct fpga_manager *fpga_mgr_create(struct device *dev,
const char *name,
const struct fpga_manager_ops *mops,
void *priv);
void fpga_mgr_free(struct fpga_manager *mgr);
int fpga_mgr_register(struct fpga_manager *mgr);
void fpga_mgr_unregister(struct fpga_manager *mgr);
Update the drivers that call fpga_mgr_register with the new API.
Signed-off-by: Alan Tull <atull@kernel.org>
[Moritz: Fixup whitespace issue]
Reported-by: Jiuyue Ma <majiuyue@huawei.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver loads FPGA firmware over SPI, using the "slave serial"
configuration interface on Xilinx FPGAs.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
