| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
ARM SCMI fixes for v5.10
Handful of fixes, some of them fixing issues since SCMI was merged.
It indicates that it is getting used now and people are finding bugs.
Fixes include unblocking multiple thread access with SMC/HVC transport,
ARCH_COLD_RESET value, locking in notifications, avoiding workqueue
name duplication with multiple instances of SCMI and adding missing
Rx size initialisation when using buffers for repeat transmits.
* tag 'scmi-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix duplicate workqueue name
firmware: arm_scmi: Fix locking in notifications
firmware: arm_scmi: Add missing Rx size re-initialisation
firmware: arm_scmi: Expand SMC/HVC message pool to more than one
firmware: arm_scmi: Fix ARCH_COLD_RESET
Link: https://lore.kernel.org/r/20201015123518.GA3839@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi update from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
Replace HTTP links with HTTPS ones: DMI/SMBIOS SUPPORT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of cleanups and new features:
- A handful of cleanups for our page fault handling
- Improvements to how we fill out cacheinfo
- Support for EFI-based systems"
* tag 'riscv-for-linus-5.10-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (22 commits)
RISC-V: Add page table dump support for uefi
RISC-V: Add EFI runtime services
RISC-V: Add EFI stub support.
RISC-V: Add PE/COFF header for EFI stub
RISC-V: Implement late mapping page table allocation functions
RISC-V: Add early ioremap support
RISC-V: Move DT mapping outof fixmap
RISC-V: Fix duplicate included thread_info.h
riscv/mm/fault: Set FAULT_FLAG_INSTRUCTION flag in do_page_fault()
riscv/mm/fault: Fix inline placement in vmalloc_fault() declaration
riscv: Add cache information in AUX vector
riscv: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
riscv: Set more data to cacheinfo
riscv/mm/fault: Move access error check to function
riscv/mm/fault: Move FAULT_FLAG_WRITE handling in do_page_fault()
riscv/mm/fault: Simplify mm_fault_error()
riscv/mm/fault: Move fault error handling to mm_fault_error()
riscv/mm/fault: Simplify fault error handling
riscv/mm/fault: Move vmalloc fault handling to vmalloc_fault()
riscv/mm/fault: Move bad area handling to bad_area()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed support for PNX833x alias NXT_STB22x
- included Ingenic SoC support into generic MIPS kernels
- added support for new Ingenic SoCs
- converted workaround selection to use Kconfig
- replaced old boot mem functions by memblock_*
- enabled COP2 usage in kernel for Loongson64 to make use
of 16byte load/stores possible
- cleanups and fixes
* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
MIPS: DEC: Restore bootmem reservation for firmware working memory area
MIPS: dec: fix section mismatch
bcm963xx_tag.h: fix duplicated word
mips: ralink: enable zboot support
MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
MIPS: cpu-probe: introduce exclusive R3k CPU probe
MIPS: cpu-probe: move fpu probing/handling into its own file
MIPS: replace add_memory_region with memblock
MIPS: Loongson64: Clean up numa.c
MIPS: Loongson64: Select SMP in Kconfig to avoid build error
mips: octeon: Add Ubiquiti E200 and E220 boards
MIPS: SGI-IP28: disable use of ll/sc in kernel
MIPS: tx49xx: move tx4939_add_memory_regions into only user
MIPS: pgtable: Remove used PAGE_USERIO define
MIPS: alchemy: Share prom_init implementation
MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
MIPS: process: include exec.h header in process.c
MIPS: process: Add prototype for function arch_dup_task_struct
MIPS: idle: Add prototype for function check_wait
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Added fw_cfg support for parisc on qemu
- Added font support in sti text console driver for byte- and word-mode
ROMs
- Switch to more fine grained lws locks and improve spinlock handling
- Add ioread64_hi_lo() and iowrite64_hi_lo() to avoid 0-day linking
errors
- Mark pointers volatile in __xchg8(), __xchg32() and __xchg64() to
help compiler
- Header file cleanups, mostly removal of unused HP-UX compat defines
- Drop one bit from our O_NONBLOCK define to become now 000200000
- Add MAP_UNINITIALIZED define to avoid userspace compile errors
- Drop CONFIG_IDE from defconfigs
- Speed up synchronize_caches() on UP machines
- Rewrite tlb flush threshold calculation
- Comment fixes and cleanups
* 'parisc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/sticon: Add user font support
parisc/sticon: Always register sticon console driver
parisc: Add MAP_UNINITIALIZED define
parisc: Improve spinlock handling
parisc: Install vmlinuz instead of zImage file
parisc: Rewrite tlb flush threshold calculation
parisc: Switch to more fine grained lws locks
parisc: Mark pointers volatile in __xchg8(), __xchg32() and __xchg64()
parisc: Fix comments and enable interrupts later
parisc: Add alternative patching to synchronize_caches define
parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()
parisc: disable CONFIG_IDE in defconfigs
parisc: Drop useless comments in uapi/asm/signal.h
parisc: Define O_NONBLOCK to become 000200000
parisc: Drop HP-UX specific fcntl and signal flags
parisc: Avoid external interrupts when IPI finishes
parisc: Add qemu fw_cfg interface
fw_cfg: Add support for parisc architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY/Thunderbolt driver updates from Greg KH:
"Here is the big set of USB, PHY, and Thunderbolt driver updates for
5.10-rc1.
Lots of tiny different things for these subsystems are in here,
including:
- phy driver updates
- thunderbolt / USB 4 updates and additions
- USB gadget driver updates
- xhci fixes and updates
- typec driver additions and updates
- api conversions to various drivers for core kernel api changes
- new USB control message functions to make it harder to get wrong,
as found by syzbot (took 2 tries to get it right)
- lots of tiny USB driver fixes and updates all over the place
All of these have been in linux-next for a while, with the exception
of the last "obviously correct" patch that updated a FALLTHROUGH
comment that got merged last weekend"
* tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits)
usb: musb: gadget: Use fallthrough pseudo-keyword
usb: typec: Add QCOM PMIC typec detection driver
USB: serial: option: add Cellient MPL200 card
usb: typec: tcpci_maxim: Add support for Sink FRS
usb: typec: tcpci: Implement callbacks for FRS
usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)
usb: typec: tcpci_maxim: Chip level TCPC driver
usb: typec: tcpci: Add set_vbus tcpci callback
usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference
usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled
usb: cdc-acm: add quirk to blacklist ETAS ES58X devices
USB: serial: ftdi_sio: use cur_altsetting for consistency
USB: serial: option: Add Telit FT980-KS composition
USB: core: remove polling for /sys/kernel/debug/usb/devices
usb: typec: add support for STUSB160x Type-C controller family
usb: typec: add typec_find_pwr_opmode
usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode
dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus
dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema
usb: dwc2: Fix INTR OUT transfers in DDMA mode.
...
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
|
|
When more than a single SCMI device are present in the system, the
creation of the notification workqueue with the WQ_SYSFS flag will lead
to the following sysfs duplicate node warning:
sysfs: cannot create duplicate filename '/devices/virtual/workqueue/scmi_notify'
CPU: 0 PID: 20 Comm: kworker/0:1 Not tainted 5.9.0-gdf4dd84a3f7d #29
Hardware name: Broadcom STB (Flattened Device Tree)
Workqueue: events deferred_probe_work_func
Backtrace:
show_stack + 0x20/0x24
dump_stack + 0xbc/0xe0
sysfs_warn_dup + 0x70/0x80
sysfs_create_dir_ns + 0x15c/0x1a4
kobject_add_internal + 0x140/0x4d0
kobject_add + 0xc8/0x138
device_add + 0x1dc/0xc20
device_register + 0x24/0x28
workqueue_sysfs_register + 0xe4/0x1f0
alloc_workqueue + 0x448/0x6ac
scmi_notification_init + 0x78/0x1dc
scmi_probe + 0x268/0x4fc
platform_drv_probe + 0x70/0xc8
really_probe + 0x184/0x728
driver_probe_device + 0xa4/0x278
__device_attach_driver + 0xe8/0x148
bus_for_each_drv + 0x108/0x158
__device_attach + 0x190/0x234
device_initial_probe + 0x1c/0x20
bus_probe_device + 0xdc/0xec
deferred_probe_work_func + 0xd4/0x11c
process_one_work + 0x420/0x8f0
worker_thread + 0x4fc/0x91c
kthread + 0x21c/0x22c
ret_from_fork + 0x14/0x20
kobject_add_internal failed for scmi_notify with -EEXIST, don't try to
register things with the same name in the same directory.
arm-scmi brcm_scmi@1: SCMI Notifications - Initialization Failed.
arm-scmi brcm_scmi@1: SCMI Notifications NOT available.
arm-scmi brcm_scmi@1: SCMI Protocol v1.0 'brcm-scmi:' Firmware version 0x1
Fix this by using dev_name(handle->dev) which guarantees that the name is
unique and this also helps correlate which notification workqueue corresponds
to which SCMI device instance.
Link: https://lore.kernel.org/r/20201014021737.287340-1-f.fainelli@gmail.com
Fixes: bd31b249692e ("firmware: arm_scmi: Add notification dispatch and delivery")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[sudeep.holla: trimmed backtrace to remove all unwanted hexcodes and timestamps]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
When a protocol registers its events, the notification core takes care
to rescan the hashtable of pending event handlers and activate all the
possibly existent handlers referring to any of the events that are just
registered by the new protocol. When a pending handler becomes active
the core requests and enables the corresponding events in the SCMI
firmware.
If, for whatever reason, the enable fails, such invalid event handler
must be finally removed and freed. Let us ensure to use the
scmi_put_active_handler() helper which handles properly the needed
additional locking.
Failing to properly acquire all the needed mutexes exposes a race that
leads to the following splat being observed:
WARNING: CPU: 0 PID: 388 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x148
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development
Platform, BIOS EDK II Jun 30 2020
pstate: 40000005 (nZcv daif -PAN -UAO BTYPE=--)
pc : refcount_warn_saturate+0xf8/0x148
lr : refcount_warn_saturate+0xf8/0x148
Call trace:
refcount_warn_saturate+0xf8/0x148
scmi_put_handler_unlocked.isra.10+0x204/0x208
scmi_put_handler+0x50/0xa0
scmi_unregister_notifier+0x1bc/0x240
scmi_notify_tester_remove+0x4c/0x68 [dummy_scmi_consumer]
scmi_dev_remove+0x54/0x68
device_release_driver_internal+0x114/0x1e8
driver_detach+0x58/0xe8
bus_remove_driver+0x88/0xe0
driver_unregister+0x38/0x68
scmi_driver_unregister+0x1c/0x28
scmi_drv_exit+0x1c/0xae0 [dummy_scmi_consumer]
__arm64_sys_delete_module+0x1a4/0x268
el0_svc_common.constprop.3+0x94/0x178
do_el0_svc+0x2c/0x98
el0_sync_handler+0x148/0x1a8
el0_sync+0x158/0x180
Link: https://lore.kernel.org/r/20201013133109.49821-1-cristian.marussi@arm.com
Fixes: e7c215f358a35 ("firmware: arm_scmi: Add notification callbacks-registration")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
In preparation for attaching a platform device per iomem resource teach
the efi_fake_mem code to create an e820 entry per instance. Similar to
E820_TYPE_PRAM, bypass merging resource when the e820 map is sanitized.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: https://lkml.kernel.org/r/159643096068.4062302.11590041070221681669.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the usbvision driver was dropped from staging
- the Zoran driver were re-added at staging. It gained lots of
improvements, and was converted to use videobuf2 API
- a new virtual driver (vidtv) was added in order to allow testing the
digital TV framework and APIs
- the media uAPI documentation gained a glossary with commonly used
terms, helping to simplify some parts of the docs
- more cleanups at the atomisp driver
- Mediatek VPU gained support for MT8183
- added support for codecs with supports doing colorspace conversion
(CSC)
- support for CSC API was added at vivid and rksip1 drivers
- added a helper core support and uAPI for better supporting H.264
codecs
- added support for Renesas R8A774E1
- use the new SPDX GFDL-1.1-no-invariants-or-later license on media
uAPI docs, instead of a license text
- Venus driver has gained VP9 codec support
- lots of other cleanups and driver improvements
* tag 'media/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (555 commits)
media: dvb-frontends/drxk_hard.c: fix uninitialized variable warning
media: tvp7002: fix uninitialized variable warning
media: s5k5baf: drop 'data' field in struct s5k5baf_fw
media: dt-bindings: media: venus: Add an optional power domain for perf voting
media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formats
media: staging: rkisp1: uapi: Do not use BIT() macro
media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_done
media: usbtv: Fix refcounting mixup
media: zoran.rst: place it at the right place this time
media: add Zoran cardlist
media: admin-guide: update cardlists
media: siano: rename a duplicated card string
media: zoran: move documentation file to the right place
media: atomisp: fixes build breakage for ISP2400 due to a cleanup
media: zoran: fix mixed case on vars
media: zoran: get rid of an unused var
media: zoran: use upper case for card types
media: zoran: fix sparse warnings
media: zoran: fix smatch warning
media: zoran: update TODO
...
|
|
Few commands provide the list of description partially and require
to be called consecutively until all the descriptors are fetched
completely. In such cases, we don't release the buffers and reuse
them for consecutive transmits.
However, currently we don't reset the Rx size which will be set as
per the response for the last transmit. This may result in incorrect
response size being interpretted as the firmware may repond with size
greater than the one set but we read only upto the size set by previous
response.
Let us reset the receive buffer size to max possible in such cases as
we don't know the exact size of the response.
Link: https://lore.kernel.org/r/20201012141746.32575-1-sudeep.holla@arm.com
Fixes: b6f20ff8bd94 ("firmware: arm_scmi: add common infrastructure and support for base protocol")
Reported-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull orphan section checking from Ingo Molnar:
"Orphan link sections were a long-standing source of obscure bugs,
because the heuristics that various linkers & compilers use to handle
them (include these bits into the output image vs discarding them
silently) are both highly idiosyncratic and also version dependent.
Instead of this historically problematic mess, this tree by Kees Cook
(et al) adds build time asserts and build time warnings if there's any
orphan section in the kernel or if a section is not sized as expected.
And because we relied on so many silent assumptions in this area, fix
a metric ton of dependencies and some outright bugs related to this,
before we can finally enable the checks on the x86, ARM and ARM64
platforms"
* tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/boot/compressed: Warn on orphan section placement
x86/build: Warn on orphan section placement
arm/boot: Warn on orphan section placement
arm/build: Warn on orphan section placement
arm64/build: Warn on orphan section placement
x86/boot/compressed: Add missing debugging sections to output
x86/boot/compressed: Remove, discard, or assert for unwanted sections
x86/boot/compressed: Reorganize zero-size section asserts
x86/build: Add asserts for unwanted sections
x86/build: Enforce an empty .got.plt section
x86/asm: Avoid generating unused kprobe sections
arm/boot: Handle all sections explicitly
arm/build: Assert for unwanted sections
arm/build: Add missing sections
arm/build: Explicitly keep .ARM.attributes sections
arm/build: Refactor linker script headers
arm64/build: Assert for unwanted sections
arm64/build: Add missing DWARF sections
arm64/build: Use common DISCARDS in linker script
arm64/build: Remove .eh_frame* sections due to unwind tables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI changes from Ingo Molnar:
- Preliminary RISC-V enablement - the bulk of it will arrive via the
RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config
table rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot####
variable contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we
can identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available
but returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
* tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
efi: mokvar: add missing include of asm/early_ioremap.h
efi: efivars: limit availability to X86 builds
efi: remove some false dependencies on CONFIG_EFI_VARS
efi: gsmi: fix false dependency on CONFIG_EFI_VARS
efi: efivars: un-export efivars_sysfs_init()
efi: pstore: move workqueue handling out of efivars
efi: pstore: disentangle from deprecated efivars module
efi: mokvar-table: fix some issues in new code
efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure
efivarfs: Replace invalid slashes with exclamation marks in dentries.
efi: Delete deprecated parameter comments
efi/libstub: Fix missing-prototypes in string.c
efi: Add definition of EFI_MEMORY_CPU_CRYPTO and ability to report it
cper,edac,efi: Memory Error Record: bank group/address and chip id
edac,ghes,cper: Add Row Extension to Memory Error Record
efi/x86: Add a quirk to support command line arguments on Dell EFI firmware
efi/libstub: Add efi_warn and *_once logging helpers
integrity: Load certs from the EFI MOK config table
integrity: Move import of MokListRT certs to a separate routine
efi: Support for MOK variable config table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's quite a lot of code here, but much of it is due to the
addition of a new PMU driver as well as some arm64-specific selftests
which is an area where we've traditionally been lagging a bit.
In terms of exciting features, this includes support for the Memory
Tagging Extension which narrowly missed 5.9, hopefully allowing
userspace to run with use-after-free detection in production on CPUs
that support it. Work is ongoing to integrate the feature with KASAN
for 5.11.
Another change that I'm excited about (assuming they get the hardware
right) is preparing the ASID allocator for sharing the CPU page-table
with the SMMU. Those changes will also come in via Joerg with the
IOMMU pull.
We do stray outside of our usual directories in a few places, mostly
due to core changes required by MTE. Although much of this has been
Acked, there were a couple of places where we unfortunately didn't get
any review feedback.
Other than that, we ran into a handful of minor conflicts in -next,
but nothing that should post any issues.
Summary:
- Userspace support for the Memory Tagging Extension introduced by
Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including
the addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing
page-tables with the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a
no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU
driver and also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT
failure.
- Improve robustness of user-visible HWCAP strings and their
corresponding numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in
preparation for potential future optimisation of handling across
syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
Revert "arm64: initialize per-cpu offsets earlier"
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
...
|
|
SMC/HVC can transmit only one message at the time as the shared memory
needs to be protected and the calls are synchronous.
However, in order to allow multiple threads to send SCMI messages
simultaneously, we need a larger poll of memory.
Let us just use value of 20 to keep it in sync mailbox transport
implementation. Any other value must work perfectly.
Link: https://lore.kernel.org/r/20201008143722.21888-4-etienne.carriere@linaro.org
Fixes: 1dc6558062da ("firmware: arm_scmi: Add smc/hvc transport")
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[sudeep.holla: reworded the commit message to indicate the practicality]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The defination for ARCH_COLD_RESET is wrong. Let us fix it according to
the SCMI specification.
Link: https://lore.kernel.org/r/20201008143722.21888-5-etienne.carriere@linaro.org
Fixes: 95a15d80aa0d ("firmware: arm_scmi: Add RESET protocol in SCMI v2.0")
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
These fixes missed the v5.9 merge window, pick them up for early v5.10 merge.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Linux 5.9-rc7
* tag 'v5.9-rc7': (683 commits)
Linux 5.9-rc7
mm/thp: Split huge pmds/puds if they're pinned when fork()
mm: Do early cow for pinned pages during fork() for ptes
mm/fork: Pass new vma pointer into copy_page_range()
mm: Introduce mm_struct.has_pinned
mm: validate pmd after splitting
mm: don't rely on system state to detect hot-plug operations
mm: replace memmap_context by meminit_context
arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback
lib/memregion.c: include memregion.h
lib/string.c: implement stpcpy
mm/migrate: correct thp migration stats
mm/gup: fix gup_fast with dynamic page table folding
mm: memcontrol: fix missing suffix of workingset_restore
mm, THP, swap: fix allocating cluster for swapfile by mistake
mm: slab: fix potential double free in ___cache_free
Documentation/llvm: Fix clang target examples
io_uring: ensure async buffered read-retry is setup properly
KVM: SVM: Add a dedicated INVD intercept routine
io_uring: don't unconditionally set plug->nowait = true
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.10:
- Use dev_err_probe() to simplify error handling for i.MX GPCv2 driver.
- Add a check in i.MX SCU power domain driver to ignore the power
domains that are not owned by the current partition.
* tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu-pd: ignore power domain not owned
soc: imx: gpcv2: Use dev_err_probe() to simplify error handling
Link: https://lore.kernel.org/r/20200923073009.23678-1-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This patch adds EFI runtime service support for RISC-V.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
[ardb: - Remove the page check]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Add a RISC-V architecture specific stub code that actually copies the
actual kernel image to a valid address and jump to it after boot services
are terminated. Enable UEFI related kernel configs as well for RISC-V.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20200421033336.9663-4-atish.patra@wdc.com
[ardb: - move hartid fetch into check_platform_features()
- use image_size not reserve_size
- select ISA_C
- do not use dram_base]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/efi/efi into for-next
Stable branch for v5.10 shared between the EFI and RISC-V trees
The RISC-V EFI boot and runtime support will be merged for v5.10 via
the RISC-V tree. However, it incorporates some changes that conflict
with other EFI changes that are in flight, so this tag serves as a
shared base that allows those conflicts to be resolved beforehand.
* tag 'efi-riscv-shared-for-v5.10' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: arm32: Use low allocation for the uncompressed kernel
efi/libstub: Export efi_low_alloc_above() to other units
efi/libstub: arm32: Base FDT and initrd placement on image address
efi: Rename arm-init to efi-init common for all arch
include: pe.h: Add RISC-V related PE definition
|
|
'for-next/cpuinfo', 'for-next/fpsimd', 'for-next/misc', 'for-next/mm', 'for-next/pci', 'for-next/perf', 'for-next/ptrauth', 'for-next/sdei', 'for-next/selftests', 'for-next/stacktrace', 'for-next/svm', 'for-next/topology', 'for-next/tpyos' and 'for-next/vdso' into for-next/core
Remove unused functions and parameters from ACPI IORT code.
(Zenghui Yu via Lorenzo Pieralisi)
* for-next/acpi:
ACPI/IORT: Remove the unused inline functions
ACPI/IORT: Drop the unused @ops of iort_add_device_replay()
Remove redundant code and fix documentation of caching behaviour for the
HVC_SOFT_RESTART hypercall.
(Pingfan Liu)
* for-next/boot:
Documentation/kvm/arm: improve description of HVC_SOFT_RESTART
arm64/relocate_kernel: remove redundant code
Improve reporting of unexpected kernel traps due to BPF JIT failure.
(Will Deacon)
* for-next/bpf:
arm64: Improve diagnostics when trapping BRK with FAULT_BRK_IMM
Improve robustness of user-visible HWCAP strings and their corresponding
numerical constants.
(Anshuman Khandual)
* for-next/cpuinfo:
arm64/cpuinfo: Define HWCAP name arrays per their actual bit definitions
Cleanups to handling of SVE and FPSIMD register state in preparation
for potential future optimisation of handling across syscalls.
(Julien Grall)
* for-next/fpsimd:
arm64/sve: Implement a helper to load SVE registers from FPSIMD state
arm64/sve: Implement a helper to flush SVE registers
arm64/fpsimdmacros: Allow the macro "for" to be used in more cases
arm64/fpsimdmacros: Introduce a macro to update ZCR_EL1.LEN
arm64/signal: Update the comment in preserve_sve_context
arm64/fpsimd: Update documentation of do_sve_acc
Miscellaneous changes.
(Tian Tao and others)
* for-next/misc:
arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE
arm64: mm: Fix missing-prototypes in pageattr.c
arm64/fpsimd: Fix missing-prototypes in fpsimd.c
arm64: hibernate: Remove unused including <linux/version.h>
arm64/mm: Refactor {pgd, pud, pmd, pte}_ERROR()
arm64: Remove the unused include statements
arm64: get rid of TEXT_OFFSET
arm64: traps: Add str of description to panic() in die()
Memory management updates and cleanups.
(Anshuman Khandual and others)
* for-next/mm:
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64/mm: Unify CONT_PMD_SHIFT
arm64/mm: Unify CONT_PTE_SHIFT
arm64/mm: Remove CONT_RANGE_OFFSET
arm64/mm: Enable THP migration
arm64/mm: Change THP helpers to comply with generic MM semantics
arm64/mm/ptdump: Add address markers for BPF regions
Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
(Clint Sbisa)
* for-next/pci:
arm64: Enable PCI write-combine resources under sysfs
Perf/PMU driver updates.
(Julien Thierry and others)
* for-next/perf:
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm_pmu: arm64: Use NMIs for PMU
arm_pmu: Introduce pmu_irq_ops
KVM: arm64: pmu: Make overflow handler NMI safe
arm64: perf: Defer irq_work to IPI_IRQ_WORK
arm64: perf: Remove PMU locking
arm64: perf: Avoid PMXEV* indirection
arm64: perf: Add missing ISB in armv8pmu_enable_counter()
perf: Add Arm CMN-600 PMU driver
perf: Add Arm CMN-600 DT binding
arm64: perf: Add support caps under sysfs
drivers/perf: thunderx2_pmu: Fix memory resource error handling
drivers/perf: xgene_pmu: Fix uninitialized resource struct
perf: arm_dsu: Support DSU ACPI devices
arm64: perf: Remove unnecessary event_idx check
drivers/perf: hisi: Add missing include of linux/module.h
arm64: perf: Add general hardware LLC events for PMUv3
Support for the Armv8.3 Pointer Authentication enhancements.
(By Amit Daniel Kachhap)
* for-next/ptrauth:
arm64: kprobe: clarify the comment of steppable hint instructions
arm64: kprobe: disable probe of fault prone ptrauth instruction
arm64: cpufeature: Modify address authentication cpufeature to exact
arm64: ptrauth: Introduce Armv8.3 pointer authentication enhancements
arm64: traps: Allow force_signal_inject to pass esr error code
arm64: kprobe: add checks for ARMv8.3-PAuth combined instructions
Tonnes of cleanup to the SDEI driver.
(Gavin Shan)
* for-next/sdei:
firmware: arm_sdei: Remove _sdei_event_unregister()
firmware: arm_sdei: Remove _sdei_event_register()
firmware: arm_sdei: Introduce sdei_do_local_call()
firmware: arm_sdei: Cleanup on cross call function
firmware: arm_sdei: Remove while loop in sdei_event_unregister()
firmware: arm_sdei: Remove while loop in sdei_event_register()
firmware: arm_sdei: Remove redundant error message in sdei_probe()
firmware: arm_sdei: Remove duplicate check in sdei_get_conduit()
firmware: arm_sdei: Unregister driver on error in sdei_init()
firmware: arm_sdei: Avoid nested statements in sdei_init()
firmware: arm_sdei: Retrieve event number from event instance
firmware: arm_sdei: Common block for failing path in sdei_event_create()
firmware: arm_sdei: Remove sdei_is_err()
Selftests for Pointer Authentication and FPSIMD/SVE context-switching.
(Mark Brown and Boyan Karatotev)
* for-next/selftests:
selftests: arm64: Add build and documentation for FP tests
selftests: arm64: Add wrapper scripts for stress tests
selftests: arm64: Add utility to set SVE vector lengths
selftests: arm64: Add stress tests for FPSMID and SVE context switching
selftests: arm64: Add test for the SVE ptrace interface
selftests: arm64: Test case for enumeration of SVE vector lengths
kselftests/arm64: add PAuth tests for single threaded consistency and differently initialized keys
kselftests/arm64: add PAuth test for whether exec() changes keys
kselftests/arm64: add nop checks for PAuth tests
kselftests/arm64: add a basic Pointer Authentication test
Implementation of ARCH_STACKWALK for unwinding.
(Mark Brown)
* for-next/stacktrace:
arm64: Move console stack display code to stacktrace.c
arm64: stacktrace: Convert to ARCH_STACKWALK
arm64: stacktrace: Make stack walk callback consistent with generic code
stacktrace: Remove reliable argument from arch_stack_walk() callback
Support for ASID pinning, which is required when sharing page-tables with
the SMMU.
(Jean-Philippe Brucker)
* for-next/svm:
arm64: cpufeature: Export symbol read_sanitised_ftr_reg()
arm64: mm: Pin down ASIDs for sharing mm with devices
Rely on firmware tables for establishing CPU topology.
(Valentin Schneider)
* for-next/topology:
arm64: topology: Stop using MPIDR for topology information
Spelling fixes.
(Xiaoming Ni and Yanfei Xu)
* for-next/tpyos:
arm64/numa: Fix a typo in comment of arm64_numa_init
arm64: fix some spelling mistakes in the comments by codespell
vDSO cleanups.
(Will Deacon)
* for-next/vdso:
arm64: vdso: Fix unusual formatting in *setup_additional_pages()
arm64: vdso32: Remove a bunch of #ifdef CONFIG_COMPAT_VDSO guards
|
|
Nathan reports that building the new mokvar table code for 32-bit
ARM fails with errors such as
error: implicit declaration of function 'early_memunmap'
error: implicit declaration of function 'early_memremap'
This is caused by the lack of an explicit #include of the appropriate
header, and ARM apparently does not inherit that inclusion via another
header file. So add the #include.
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
CONFIG_EFI_VARS controls the code that exposes EFI variables via
sysfs entries, which was deprecated before support for non-Intel
architectures was added to EFI. So let's limit its availability
to Intel architectures for the time being, and hopefully remove
it entirely in the not too distant future.
While at it, let's remove the module alias so that the module is
no longer loaded automatically.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Remove some false dependencies on CONFIG_EFI_VARS, which only controls
the creation of the sysfs entries, whereas the underlying functionality
that these modules rely on is enabled unconditionally when CONFIG_EFI
is set.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The gsmi code does not actually rely on CONFIG_EFI_VARS, since it only
uses the efivars abstraction that is included unconditionally when
CONFIG_EFI is defined. CONFIG_EFI_VARS controls the inclusion of the
code that exposes the sysfs entries, and which has been deprecated for
some time.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
efivars_sysfs_init() is only used locally in the source file that
defines it, so make it static and unexport it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The worker thread that gets kicked off to sync the state of the
EFI variable list is only used by the EFI pstore implementation,
and is defined in its source file. So let's move its scheduling
there as well. Since our efivar_init() scan will bail on duplicate
entries, there is no need to disable the workqueue like we did
before, so we can run it unconditionally.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The EFI pstore implementation relies on the 'efivars' abstraction,
which encapsulates the EFI variable store in a way that can be
overridden by other backing stores, like the Google SMI one.
On top of that, the EFI pstore implementation also relies on the
efivars.ko module, which is a separate layer built on top of the
'efivars' abstraction that exposes the [deprecated] sysfs entries
for each variable that exists in the backing store.
Since the efivars.ko module is deprecated, and all users appear to
have moved to the efivarfs file system instead, let's prepare for
its removal, by removing EFI pstore's dependency on it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Fix a couple of issues in the new mokvar-table handling code, as
pointed out by Arvind and Boris:
- don't bother checking the end of the physical region against the start
address of the mokvar table,
- ensure that we enter the loop with err = -EINVAL,
- replace size_t with unsigned long to appease pedantic type equality
checks.
Reviewed-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Lenny Szubowicz <lszubowi@redhat.com>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Currently, on arm64, we abort on any failure from efi_get_random_bytes()
other than EFI_NOT_FOUND when it comes to setting the physical seed for
KASLR, but ignore such failures when obtaining the seed for virtual
KASLR or for early seeding of the kernel's entropy pool via the config
table. This is inconsistent, and may lead to unexpected boot failures.
So let's permit any failure for the physical seed, and simply report
the error code if it does not equal EFI_NOT_FOUND.
Cc: <stable@vger.kernel.org> # v5.8+
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
_sdei_event_unregister() is called by sdei_event_unregister() and
sdei_device_freeze(). _sdei_event_unregister() covers the shared
and private events, but sdei_device_freeze() only covers the shared
events. So the logic to cover the private events isn't needed by
sdei_device_freeze().
sdei_event_unregister sdei_device_freeze
_sdei_event_unregister sdei_unregister_shared
_sdei_event_unregister
This removes _sdei_event_unregister(). Its logic is moved to its
callers accordingly. This shouldn't cause any logical changes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-14-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The function _sdei_event_register() is called by sdei_event_register()
and sdei_device_thaw() as the following functional call chain shows.
_sdei_event_register() covers the shared and private events, but
sdei_device_thaw() only covers the shared events. So the logic to
cover the private events in _sdei_event_register() isn't needed by
sdei_device_thaw().
Similarly, sdei_reregister_event_llocked() covers the shared and
private events in the regard of reenablement. The logic to cover
the private events isn't needed by sdei_device_thaw() either.
sdei_event_register sdei_device_thaw
_sdei_event_register sdei_reregister_shared
sdei_reregister_event_llocked
_sdei_event_register
This removes _sdei_event_register() and sdei_reregister_event_llocked().
Their logic is moved to sdei_event_register() and sdei_reregister_shared().
This shouldn't cause any logical changes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-13-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
During the CPU hotplug, the private events are registered, enabled
or unregistered on the specific CPU. It repeats the same steps:
initializing cross call argument, make function call on local CPU,
check the returned error.
This introduces sdei_do_local_call() to cover the first steps. The
other benefit is to make CROSSCALL_INIT and struct sdei_crosscall_args
are only visible to sdei_do_{cross, local}_call().
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-12-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This applies cleanup on the cross call functions, no functional
changes are introduced:
* Wrap the code block of CROSSCALL_INIT inside "do { } while (0)"
as linux kernel usually does. Otherwise, scripts/checkpatch.pl
reports warning regarding this.
* Use smp_call_func_t for @fn argument in sdei_do_cross_call()
as the function is called on target CPU(s).
* Remove unnecessary space before @event in sdei_do_cross_call()
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-11-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This removes the unnecessary while loop in sdei_event_unregister()
because of the following two reasons. This shouldn't cause any
functional changes.
* The while loop is executed for once, meaning it's not needed
in theory.
* With the while loop removed, the nested statements can be
avoid to make the code a bit cleaner.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200922130423.10173-10-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This removes the unnecessary while loop in sdei_event_register()
because of the following two reasons. This shouldn't cause any
functional changes.
* The while loop is executed for once, meaning it's not needed
in theory.
* With the while loop removed, the nested statements can be
avoid to make the code a bit cleaner.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200922130423.10173-9-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This removes the redundant error message in sdei_probe() because
the case can be identified from the errno in next error message.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-8-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The following two checks are duplicate because @acpi_disabled doesn't
depend on CONFIG_ACPI. So the duplicate check (IS_ENABLED(CONFIG_ACPI))
can be dropped. More details is provided to keep the commit log complete:
* @acpi_disabled is defined in arch/arm64/kernel/acpi.c when
CONFIG_ACPI is enabled.
* @acpi_disabled in defined in include/acpi.h when CONFIG_ACPI
is disabled.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-7-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The SDEI platform device is created from device-tree node or ACPI
(SDEI) table. For the later case, the platform device is created
explicitly by this module. It'd better to unregister the driver on
failure to create the device to keep the symmetry. The driver, owned
by this module, isn't needed if the device isn't existing.
Besides, the errno (@ret) should be updated accordingly in this
case.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-6-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In sdei_init(), the nested statements can be avoided by bailing
on error from platform_driver_register() or absent ACPI SDEI table.
With it, the code looks a bit more readable.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-5-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In sdei_event_create(), the event number is retrieved from the
variable @event_num for the shared event. The event number was
stored in the event instance. So we can fetch it from the event
instance, similar to what we're doing for the private event.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-4-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There are multiple calls of kfree(event) in the failing path of
sdei_event_create() to free the SDEI event. It means we need to
call it again when adding more code in the failing path. It's
prone to miss doing that and introduce memory leakage.
This introduces common block for failing path in sdei_event_create()
to resolve the issue. This shouldn't cause functional changes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20200922130423.10173-3-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
sdei_is_err() is only called by sdei_to_linux_errno(). The logic of
checking on the error number is common to them. They can be combined
finely.
This removes sdei_is_err() and its logic is combined to the function
sdei_to_linux_errno(). Also, the assignment of @err to zero is also
dropped in invoke_sdei_fn() because it's always overridden afterwards.
This shouldn't cause functional changes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200922130423.10173-2-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
ARM: soc: TI driver updates for v5.10
Consist of:
- Add Ring accelerator support for AM65x
- Add TI PRUSS platform driver and enable it on available platforms
- Extend PRUSS driver for CORECLK_MUX/IEPCLK_MUX support
- UDMA rx ring pair fix
- Add socinfo entry for J7200
* tag 'drivers_soc_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
Add missing '#' to fix schema errors:
soc: ti: Convert to DEFINE_SHOW_ATTRIBUTE
dmaengine: ti: k3-udma-glue: Fix parameters for rx ring pair request
soc: ti: k3-socinfo: Add entry for J7200
soc: ti: pruss: support CORECLK_MUX and IEPCLK_MUX
dt-bindings: soc: ti: Update TI PRUSS bindings regarding clock-muxes
firmware: ti_sci: allow frequency change for disabled clocks by default
soc: ti: ti_sci_pm_domains: switch to use multiple genpds instead of one
soc: ti: pruss: Enable support for ICSSG subsystems on K3 J721E SoCs
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM65x SoCs
soc: ti: pruss: Add support for PRU-ICSS subsystems on 66AK2G SoC
soc: ti: pruss: Add support for PRU-ICSS subsystems on AM57xx SoCs
soc: ti: pruss: Add support for PRU-ICSSs on AM437x SoCs
soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs
dt-bindings: soc: ti: Add TI PRUSS bindings
bindings: soc: ti: soc: ringacc: remove ti,dma-ring-reset-quirk
soc: ti: k3: ringacc: add am65x sr2.0 support
Link: https://lore.kernel.org/r/1600656828-29267-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
firmware: tegra: Changes for v5.10-rc1
This is a minor change that implements a BPMP workaround for pre-silicon
platforms and is needed to enable support for BPMP on Tegra234.
* tag 'tegra-for-5.10-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Enable BPMP support on Tegra234
Link: https://lore.kernel.org/r/20200918150303.3938852-3-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
