| Age | Commit message (Collapse) | Author |
|---|
|
SCMIv2.0 adds a new Reset Management Protocol to manage various reset
states a given device or domain can enter. Device(s) that can be
collectively reset through a common reset signal constitute a reset
domain for the firmware.
A reset domain can be reset autonomously or explicitly through assertion
and de-assertion of the signal. When autonomous reset is chosen, the
firmware is responsible for taking the necessary steps to reset the
domain and to subsequently bring it out of reset. When explicit reset is
chosen, the caller has to specifically assert and then de-assert the
reset signal by issuing two separate RESET commands.
Add the basic SCMI reset infrastructure that can be used by Linux
reset controller driver.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch hooks up the support for device power domain provided by
SCMI using the Linux generic power domain infrastructure.
Cc: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The sensor protocol provides functions to manage platform sensors, and
provides the commands to describe the protocol version and the various
attribute flags. It also provides commands to discover various sensors
implemented and managed by the platform, read any sensor synchronously
or asynchronously as allowed by the platform, program sensor attributes
and/or configurations, if applicable.
This patch adds support for most of the above features.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The power protocol is intended for management of power states of various
power domains. The power domain management protocol provides commands to
describe the protocol version, discover the implementation specific
attributes, set and get the power state of a domain.
This patch adds support for the above mention features of the protocol.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
--
drivers/firmware/arm_scmi/Makefile | 2 +-
drivers/firmware/arm_scmi/power.c | 242 +++++++++++++++++++++++++++++++++++++
include/linux/scmi_protocol.h | 28 +++++
3 files changed, 271 insertions(+), 1 deletion(-)
create mode 100644 drivers/firmware/arm_scmi/power.c
|
|
The clock protocol is intended for management of clocks. It is used to
enable or disable clocks, and to set and get the clock rates. This
protocol provides commands to describe the protocol version, discover
various implementation specific attributes, describe a clock, enable
and disable a clock and get/set the rate of the clock synchronously or
asynchronously.
This patch adds initial support for the clock protocol.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The performance protocol is intended for the performance management of
group(s) of device(s) that run in the same performance domain. It
includes even the CPUs. A performance domain is defined by a set of
devices that always have to run at the same performance level.
For example, a set of CPUs that share a voltage domain, and have a
common frequency control, is said to be in the same performance domain.
The commands in this protocol provide functionality to describe the
protocol version, describe various attribute flags, set and get the
performance level of a domain. It also supports discovery of the list
of performance levels supported by a performance domain, and the
properties of each performance level.
This patch adds basic support for the performance protocol.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The SCMI specification encompasses various protocols. However, not every
protocol has to be present on a given platform/implementation as not
every protocol is relevant for it.
Furthermore, the platform chooses which protocols it exposes to a given
agent. The only protocol that must be implemented is the base protocol.
The base protocol is used by an agent to discover which protocols are
available to it.
In order to enumerate the discovered implemented protocols, this patch
adds support for a separate scmi protocol bus. It also adds mechanism to
register support for different protocols.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The base protocol describes the properties of the implementation and
provide generic error management. The base protocol provides commands
to describe protocol version, discover implementation specific
attributes and vendor/sub-vendor identification, list of protocols
implemented and the various agents are in the system including OSPM
and the platform. It also supports registering for notifications of
platform errors.
This protocol is mandatory. This patch adds support for the same along
with some basic infrastructure to add support for other protocols.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The SCMI is intended to allow OSPM to manage various functions that are
provided by the hardware platform it is running on, including power and
performance functions. SCMI provides two levels of abstraction, protocols
and transports. Protocols define individual groups of system control and
management messages. A protocol specification describes the messages
that it supports. Transports describe the method by which protocol
messages are communicated between agents and the platform.
This patch adds basic infrastructure to manage the message allocation,
initialisation, packing/unpacking and shared memory management.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
