summaryrefslogtreecommitdiff
path: root/drivers/firewire
AgeCommit message (Collapse)Author
2009-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: pass correct iso xmit timestamps to core firewire: ohci: Make cycleMatch ISO transmission work
2009-11-21firewire: ohci: pass correct iso xmit timestamps to coreJay Fenlason
Here is the final set of patches I used to get ffado to work with the new firewire stack. With these patches, I was able to start ardour and record from and playback to my PreSonus Inspire1394 from a (mostly) Fedora 12 system. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Until now, firewire-ohci exposed only the transmit cycle of the last transmitted packet at each isochronous transmit complete event. This made it impossible for FFADO (FireWire audio drivers in userspace) to synchronize audio-out streams. The fix is to store the timestamp of each packet in the iso xmit event. As a bonus, the transfer status is stored too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-11-18firewire: ohci: Make cycleMatch ISO transmission workJay Fenlason
Calling the START_ISO ioctl with a nonnegative cycle paramater has never worked. Last night I got around to figuring out why. Most of this patch is a big comment explaining why we enable an interrupt source then don't actually do anything when we get one. As the comment says, we should do more, but we don't have a way to tell userspace what happened. . . Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited comment)
2009-10-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: provide fallback if mgt_ORB_timeout is missing ieee1394: add documentation entry to MAINTAINERS ieee1394: update URLs in debugging-via-ohci1394.txt
2009-10-14firewire: sbp2: provide fallback if mgt_ORB_timeout is missingStefan Richter
The Unit_Characteristics entry of an SBP-2 unit directory is not mandatory as far as I can tell. If it is missing, we would probably fail to log in into the target because firewire-sbp2 would not wait for status after it sent the login request. The fix moves the cleanup of tgt->mgt_orb_timeout into a place where it is executed exactly once before login, rather than 0..n times depending on the target's config ROM. With targets with one or more Unit_Characteristics entries, the result is the same as before. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-10-04headers: remove sched.h from poll.hAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: remove a workaround for Momobay FX-3A firewire: sbp2: remove a workaround for Momobay FX-3A firewire: sbp2: fix status reception firewire: core: fix topology map response handler firewire: core: fix race with parallel PCI device probe firewire: core: header file cleanup firewire: ohci: fix Self ID Count register mask (safeguard against buffer overflow) ieee1394: raw1394: Do not leak memory on failed trylock.
2009-09-15driver model: constify attribute groupsDavid Brownell
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits) netxen: update copyright netxen: fix tx timeout recovery netxen: fix file firmware leak netxen: improve pci memory access netxen: change firmware write size tg3: Fix return ring size breakage netxen: build fix for INET=n cdc-phonet: autoconfigure Phonet address Phonet: back-end for autoconfigured addresses Phonet: fix netlink address dump error handling ipv6: Add IFA_F_DADFAILED flag net: Add DEVTYPE support for Ethernet based devices mv643xx_eth.c: remove unused txq_set_wrr() ucc_geth: Fix hangs after switching from full to half duplex ucc_geth: Rearrange some code to avoid forward declarations phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs drivers/net/phy: introduce missing kfree drivers/net/wan: introduce missing kfree net: force bridge module(s) to be GPL Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded ... Fixed up trivial conflicts: - arch/x86/include/asm/socket.h converted to <asm-generic/socket.h> in the x86 tree. The generic header has the same new #define's, so that works out fine. - drivers/net/tun.c fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that switched over to using 'tun->socket.sk' instead of the redundantly available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks to the TUN driver") which added a new 'tun->sk' use. Noted in 'next' by Stephen Rothwell.
2009-09-12firewire: sbp2: remove a workaround for Momobay FX-3AStefan Richter
The inquiry delay does more harm than good in tests on a recent kernel. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: sbp2: fix status receptionStefan Richter
Per SBP-2 clause 5.3, a target shall store 8...32 bytes of status information. Trailing zeros after the first 8 bytes don't need to be stored, they are implicit. Fix the status write handler to clear all unwritten status data. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: core: fix topology map response handlerStefan Richter
This register is 1 kBytes large. Adjust topology_map.length to prevent registration of other response handlers in this region and to make sure that we respond to requests to the upper half of the register. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: core: fix race with parallel PCI device probeStefan Richter
The config ROM buffer received from generate_config_rom is a globally shared static buffer. Extend the card_mutex protection in fw_add_card until after the config ROM was copied into the card driver's buffer. Otherwise, parallelized card driver probes may end up with ROM contents that were meant for a different card. firewire-ohci's card->driver->enable hook is safe to be called within the card_mutex. Furthermore, it is safe to reorder card_list update versus card enable, which simplifies the code a little. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: core: header file cleanupStefan Richter
fw_card_get, fw_card_put, fw_card_release are currently not exported for use outside the firewire-core. Move their definitions/ declarations from the subsystem header file to the core header file. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-12firewire: ohci: fix Self ID Count register mask (safeguard against buffer ↵Stefan Richter
overflow) The selfIDSize field of Self ID Count is 9 bits wide, and we are only interested in the high 8 bits. Fix the mask accordingly. The previously too large mask didn't do damage though because the next few bits in the register are reserved and therefore zero with presently existing hardware. Also, check for the maximum possible self ID count of 252 (according to OHCI 1.1 clause 11.2 and IEEE 1394a-2000 clause 4.3.4.1, i.e. up to four self IDs of up to 63 nodes, even though IEEE 1394 up to edition 2008 defines only up to three self IDs per node). More than 252 self IDs would only happen if the self ID receive DMA unit malfunctioned, which would likely be caught by other self ID buffer checks. However, check it early to be sure. More than 253 quadlets would overflow the Topology Map CSR. Reported-By: PaX Team Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix freeing of unallocated memory firewire: ohci: fix Ricoh R5C832, video reception firewire: ohci: fix Agere FW643 and multiple cameras firewire: core: fix crash in iso resource management
2009-09-05firewire: sbp2: fix freeing of unallocated memoryStefan Richter
If a target writes invalid status (typically status of a command that already timed out), firewire-sbp2 attempts to put away an ORB that doesn't exist. https://bugzilla.redhat.com/show_bug.cgi?id=519772 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05firewire: ohci: fix Ricoh R5C832, video receptionStefan Richter
In dual-buffer DMA mode, no video frames are ever received from R5C832 by libdc1394. Fallback to packet-per-buffer DMA works reliably. http://thread.gmane.org/gmane.linux.kernel.firewire.devel/13393/focus=13476 Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05firewire: ohci: fix Agere FW643 and multiple camerasStefan Richter
An Agere FW643 OHCI 1.1 card works fine for video reception from one camera but fails early if receiving from two cameras. After a short while, no IR IRQ events occur and the context control register does not react anymore. This happens regardless whether both IR DMA contexts are dual-buffer or one is dual-buffer and the other packet-per-buffer. This can be worked around by disabling dual buffer DMA mode entirely. http://sourceforge.net/mailarchive/message.php?msg_name=4A7C0594.2020208%40gmail.com (Reported by Samuel Audet.) In another report (by Jonathan Cameron), an FW643 works OK with two cameras in dual buffer mode. Whether this is due to different chip revisions or different usage patterns (different video formats) is not yet clear. However, as far as the current capabilities of firewire-core's isochronous I/O interface are concerned, simply switching off dual-buffer on non-working and working FW643s alike is not a problem in practice. We only need to revisit this issue if we are going to enhance the interface, e.g. so that applications can explicitly choose modes. Reported-by: Samuel Audet <samuel.audet@gmail.com> Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-05firewire: core: fix crash in iso resource managementStefan Richter
This fixes a regression due to post 2.6.30 commit "firewire: core: do not DMA-map stack addresses" 6fdc03709433ccc2005f0f593ae9d9dd04f7b485. As David Moore noted, a previously correct sizeof() expression became wrong since the commit changed its argument from an array to a pointer. This resulted in an oops in ohci_cancel_packet in the shared workqueue thread's context when an isochronous resource was to be freed. Reported-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-09-02drivers: Kill now superfluous ->last_rx storesEric Dumazet
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02netdev: drivers should make ethtool_ops constStephen Hemminger
No need to put ethtool_ops in data, they should be const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert pseudo drivers to netdev_tx_tStephen Hemminger
These are all drivers that don't touch real hardware. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: sbp2: add support for disks >2 TB (and 16 bytes long CDBs) firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs) firewire: core: do not DMA-map stack addresses
2009-07-02firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)Stefan Richter
Increase the command ORB data structure to transport up to 16 bytes long CDBs (instead of 12 bytes), and tell the SCSI mid layer about it. This is notably necessary for READ CAPACITY(16) and friends, i.e. support of large disks. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-25firewire: core: do not DMA-map stack addressesStefan Richter
The DMA mapping API cannot map on-stack addresses, as explained in Documentation/DMA-mapping.txt. Convert the two cases of on-stack packet payload buffers in firewire-core (payload of lock requests in the bus manager work and in iso resource management) to slab-allocated memory. There are a number on-stack buffers for quadlet write or quadlet read requests in firewire-core and firewire-sbp2. These are harmless; they are copied to/ from card driver internal DMA buffers since quadlet payloads are inlined with packet headers. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: new stack is no longer experimental firewire: net: better FIFO address range check and rcodes firewire: net: fix card driver reloading firewire: core: fix iso context shutdown on card removal firewire: core: fix DMA unmapping in iso buffer removal firewire: net: adjust net_device ops firewire: net: remove unused code firewire: net: allow for unordered unit discovery firewire: net: style changes firewire: net: add Kconfig item, rename driver firewire: add IPv4 support
2009-06-21firewire: new stack is no longer experimentalStefan Richter
The new stack is now recommended over the old one if used for industrial video (IIDC/DCAM) or for storage devices (SBP-2) due to better performance, improved compatibility, added features, and security. It should also be functionally on par with and is more secure than the old ieee1394 stack in the use case of consumer video devices. IP-over-1394 support for the new stack is currently emerging, and a backend of the firedtv DVB driver to the new stack should be available soon. The one remaining area where the old stack is still required are audio devices, as the new stack is not yet able to support the FFADO FireWire audio framework. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: use more outbound tlabels firewire: core: don't update Broadcast_Channel if RFC 2734 conditions aren't met firewire: core: prepare for non-core children of card devices firewire: core: include linux/uaccess.h instead of asm/uaccess.h firewire: add parent-of-unit accessor firewire: rename source files firewire: reorganize header files firewire: clean up includes firewire: ohci: access bus_seconds atomically firewire: also use vendor ID in root directory for driver matches firewire: share device ID table type with ieee1394 firewire: core: add sysfs attribute for easier udev rules firewire: core: check for missing struct update at build time, not run time firewire: core: improve check for local node
2009-06-16firewire: net: better FIFO address range check and rcodesStefan Richter
The AR req handler should not check the generation; higher level code is the better place to handle bus generation changes. The target node ID just needs to be checked for not being the "all nodes" address; in this case don't handle the request and don't respond. Use Address_Error and Type_Error rcodes as appropriate. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16firewire: net: fix card driver reloadingStefan Richter
Fix some problems from "firewire: net: allow for unordered unit discovery": - fwnet_remove was missing a list_del, causing fwnet_probe to crash if called after fwnet_remove, e.g. if firewire-ohci was unloaded and reloaded. - fwnet_probe should set its new_netdev flag only if it actually allocated a net_device. - Use dev_set_drvdata and dev_get_drvdata instead of deprecated direct access to device.driver_data. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16firewire: core: fix iso context shutdown on card removalStefan Richter
If isochronous contexts existed when firewire-ohci was unloaded, the core iso shutdown functions crashed with NULL dereferences, and buffers etc. weren't released. How the fix works: We first copy the card driver's iso shutdown hooks into the dummy driver, then fw_destroy_nodes notifies upper layers of devices going away, these should shut down (including their iso contexts), wait_for_completion(&card->done) will be triggered after upper layers gave up all fw_device references, after which the card driver's shutdown proceeds. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-16firewire: core: fix DMA unmapping in iso buffer removalStefan Richter
dmap_unmap_page() shall use the same direction as dma_map_page(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-15firewire: remove driver_data direct access of struct deviceGreg Kroah-Hartman
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: linux1394-devel@lists.sourceforge.net Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Kristian Hoegsberg <krh@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-14firewire: net: adjust net_device opsStefan Richter
The .ndo_tx_timeout callback is currently without function; delete it. Give .watchdog_timeo a proper time value; lower it to 2 seconds. Decrease the .tx_queue_len from 1000 (as in Ethernet card drivers) to 10 because we have only 64 transaction labels available, and responders might have further limits of their AR req contexts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14firewire: net: remove unused codeStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14firewire: net: allow for unordered unit discoveryStefan Richter
Decouple the creation and destruction of the net_device from the order of discovery and removal of nodes with RFC 2734 unit directories since there is no reliable order. The net_device is now created when the first RFC 2734 unit on a card is discovered, and destroyed when the last RFC 2734 unit on a card went away. This includes all remote units as well as the local unit, which is therefore tracked as a peer now too. Also, locking around the list of peers is slightly extended to guard against peer removal. As a side effect, fwnet_peer.pdg_lock has become superfluous and is deleted. Peer data (max_rec, speed, node ID, generation) are updated more carefully. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14firewire: net: style changesStefan Richter
Change names of types, variables, functions. Omit debug code. Use get_unaligned*, put_unaligned*. Annotate big endian data. Handle errors in __init. Change whitespace. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14firewire: net: add Kconfig item, rename driverStefan Richter
The driver is now called firewire-net. It might implement the transport of other networking protocols in the future, notably IPv6 per RFC 3146. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14firewire: add IPv4 supportJay Fenlason
Implement IPv4 over IEEE 1394 as per RFC 2734 for the newer firewire stack. This feature has only been present in the older ieee1394 stack via the eth1394 driver. Still to do: - fix ipv4_priv and ipv4_node lifetime logic - fix determination of speeds and max payloads - fix bus reset handling - fix unaligned memory accesses - fix coding style - further testing/ improvement of fragment reassembly - perhaps multicast support Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (rebased, copyright note, changelog)
2009-06-14firewire: core: use more outbound tlabelsStefan Richter
Tlabel is a 6 bits wide datum. Wrap it after 63 rather than 31 for more safety against transaction label exhaustion and potential responders' transaction layer bugs. (As noted by Guus Sliepen, this change requires an expansion of tlabel_mask to 64 bits.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-14firewire: core: don't update Broadcast_Channel if RFC 2734 conditions aren't metStefan Richter
This extra check will avoid Broadcast_Channel register related traffic to many IIDC, SBP-2, and AV/C devices which aren't IRMC or have a max_rec < 8 (i.e. support < 512 bytes async payload). This avoids a little bit of traffic after bus reset and is even more careful with devices which don't implement this CSR. The assumption is that no other protocol than IP over 1394 uses the broadcast channel for streams. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-06firewire: core: prepare for non-core children of card devicesStefan Richter
The IP-over-1394 driver will add child devices beneath card devices which are not of type fw_device. Hence firewire-core's callbacks in device_for_each_child() and device_find_child() need to check for the device type now. Initial version written by Jay Fenlason. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-06firewire: core: include linux/uaccess.h instead of asm/uaccess.hStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-06firewire: add parent-of-unit accessorStefan Richter
Retrieval of an fw_unit's parent is a common pattern in high-level code. Wrap it up as device = fw_parent_device(unit). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05firewire: rename source filesStefan Richter
The source files of firewire-core, firewire-ohci, firewire-sbp2, i.e. "drivers/firewire/fw-*.c" are renamed to "drivers/firewire/core-*.c", "drivers/firewire/ohci.c", "drivers/firewire/sbp2.c". The old fw- prefix was redundant to the directory name. The new core- prefix distinguishes the files according to which driver they belong to. This change comes a little late, but still before further firewire drivers are added as anticipated RSN. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05firewire: reorganize header filesStefan Richter
The three header files of firewire-core, i.e. "drivers/firewire/fw-device.h", "drivers/firewire/fw-topology.h", "drivers/firewire/fw-transaction.h", are replaced by "drivers/firewire/core.h", "include/linux/firewire.h". The latter includes everything which a firewire high-level driver (like firewire-sbp2) needs besides linux/firewire-constants.h, while core.h contains the rest which is needed by firewire-core itself and by low- level drivers (card drivers) like firewire-ohci. High-level drivers can now also reside outside of drivers/firewire without having to add drivers/firewire to the header file search path in makefiles. At least the firedtv driver will be such a driver. I also considered to spread the contents of core.h over several files, one for each .c file where the respective implementation resides. But it turned out that most core .c files will end up including most of the core .h files. Also, the combined core.h isn't unreasonably big, and it will lose more of its contents to linux/firewire.h anyway soon when more firewire drivers are added. (IP-over-1394, firedtv, and there are plans for one or two more.) Furthermore, fw-ohci.h is renamed to ohci.h. The name of core.h and ohci.h is chosen with regard to name changes of the .c files in a follow-up change. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05firewire: clean up includesStefan Richter
Include required headers which were only indirectly included. Remove unused includes and an unused constant. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05firewire: ohci: access bus_seconds atomicallyStefan Richter
In the unlikely event that card->driver->get_bus_time() is called during a cycle64Seconds interrupt, we could read garbage unless atomic accesses are used. The switch to atomic ops requires to change the 64 seconds counter from unsigned to signed, but this shouldn't matter to the end result. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-05firewire: also use vendor ID in root directory for driver matchesStefan Richter
Due to AV/C protocol extensions, FireDTV devices need a vendor-specific driver. But their configuration ROM features a vendor ID only in the root directory, not in the unit directory. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>