summaryrefslogtreecommitdiff
path: root/drivers/extcon
AgeCommit message (Collapse)Author
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-08-05extcon: adc-jack: Use power efficient workqueueMark Brown
The debounce timeout is generally quite long and the work not performance critical so allow the scheduler to run the work anywhere rather than in the normal per-CPU workqueue. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: gpio: Use power efficient workqueue for debounceMark Brown
The debounce timeout is generally quite long and the work not performance critical so allow the scheduler to run the work anywhere rather than in the normal per-CPU workqueue. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: arizona: Use power efficient workqueueMark Brown
None of the delayed work the driver schedules has particularly short delays and it is not performance sensitive so let the scheduler run it wherever is most efficient rather than in a per CPU workqueue by using the system power efficient workqueue. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palmas: Option to disable ID/VBUS detection based on platformLaxman Dewangan
Based on system design, platform needs to detect the VBUS or ID or both. Provide option to select this through platform data to disable part of cable detection through palmas-usb. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palams: add support for suspend/resumeLaxman Dewangan
Add suspend/resume callbacks and support for wakeup from suspend on USB HOST or USB Device cable insertion or removal. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palmas: enable ID_GND and ID_FLOAT detection alwaysLaxman Dewangan
When integrating driver with Tegra platform, it is found that the ID pins get detected only once after booting system and further removal and re-insert does not detect the ID pin. Fixing this issue with enabling interrupt on ID_GND and ID_FLOAT always and clearing the status on LATCH register which actually occurred. Also if interrupt occurs with line status as zero then based on previous status, set the cable state. Add debug prints to display the cable state when any cable insertion/removal happen. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: palmas: remove assigning "edev.name" to palmasKishon Vijay Abraham I
of_extcon_get_extcon_dev() uses dev_name for getting the reference to the extcon device. If the extcon driver assigns a different name other than dev_name, of_extcon_get_extcon_dev() wouldn't be able to find the reference to the extcon device. Since the client drivers of extcon-palmas would be using of_extcon_get_extcon_dev(), removed assigning edev.name in extcon-palmas. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-08-05extcon: Add an API to get extcon device from dt nodeKishon Vijay Abraham I
Added an API of_extcon_get_extcon_dev() to be used by drivers to get extcon device in the case of dt boot (this can be used instead of extcon_get_extcon_dev()). Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-07-25extcon: convert extcon_class to use dev_groupsGreg Kroah-Hartman
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the extcon_class code to use the correct field. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Chanwoo Choi<cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03drivers: avoid format string in dev_set_nameKees Cook
Calling dev_set_name with a single paramter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents, including wrappers like device_create*() and bdi_register(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-17extcon: Palmas Extcon DriverGraeme Gregory
This is the driver for the USB comparator built into the palmas chip. It handles the various USB OTG events that can be generated by cable insertion/removal. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: George Cherian <george.cherian@ti.com> [kishon@ti.com: adapted palmas usb driver to use the extcon framework] Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17extcon: add EXPORT_SYMBOL_GPL for exported functionsKishon Vijay Abraham I
Added EXPORT_SYMBOL_GPL() for extcon_register_interest and extcon_register_notifier in order to avoid undefined reference error when building the consumer modules of extcon as _modules_. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17extcon: Change permission 'state' sysfs entry (rw -> r)Chanwoo Choi
This patch change permission from read/write to only read. The specific process in the user-space couldn't change the state of cable when cable is attached or detached. - /sys/class/extcon/[devine name]/state Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-04-16Convert selectors of GENERIC_GPIO to GPIOLIBAlexandre Courbot
GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-08Merge tag 'extcon-for-3.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: This is small fixes for extcon driver. MAX77693 extcon driver - Add 'static' keryword to internal data structure - Fix return value using 'ret' instead of hardcoding MAX8997 extcon driver - Use dev_err() instead of pr_err() - Fix return value using 'ret' instead of hardcoding
2013-04-09extcon: max8997: Fix return valueSachin Kamat
Return the value obtained from the function instead of hardcoding. Fixes the following warnings: drivers/extcon/extcon-max8997.c:235 max8997_muic_set_path() info: why not propagate 'ret' from max8997_update_reg() instead of (-11)? drivers/extcon/extcon-max8997.c:248 max8997_muic_set_path() info: why not propagate 'ret' from max8997_update_reg() instead of (-11)? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-04-09extcon: max77693: Fix return valueSachin Kamat
Return the value obtained from the function instead of hardcoding. Silences the following warnings: drivers/extcon/extcon-max77693.c:297 max77693_muic_set_path() info: why not propagate 'ret' from max77693_update_reg() instead of (-11)? drivers/extcon/extcon-max77693.c:310 max77693_muic_set_path() info: why not propagate 'ret' from max77693_update_reg() instead of (-11)? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-04-09extcon: max8997: use dev_err() instead of pr_err()Jingoo Han
dev_err() is more preferred than pr_err(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-04-09extcon: max77693: Staticize default_init_dataSachin Kamat
Commit 0ec83bd246 ("extcon: max77693: Initialize register of MUIC device to bring up it without platform data") added this structure but forgot to make it static. Without this patch we get the following warning: drivers/extcon/extcon-max77693.c:41:26: warning: symbol 'default_init_data' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-04-03Merge tag 'extcon-arizona-v3.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into char-misc-next Mark writes: extcon: arizona: Updates for v3.10 There's a bunch of different things in this series, I can split them out if need be: - Support for configuring the button detection circuit to reflect the accessories supplied with the system. - Improvements in the HPDET based detection scheme. - Additional robustness against more pathological use cases. - A few small standalone fixes.
2013-04-02extcon: arizona: Make mic detection timeout configurableMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Allow additional debounce during microphone detectionMark Brown
Help mitigate against mechanical bounce during the initial detection by allowing the configuration of an additional debounce on top of that the hardware does during the initial phase of microphone detection operation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Clear existing button reports before reporting new oneMark Brown
If the user moves directly from one button to another then we won't get a no buttons pressed event and will therefore end up reporting that two buttons are simultaneously pressed which isn't supported by the hardware. Make sure we clear any existing button reports before reporting any new ones. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Time out if MICDET fails to reportMark Brown
In pathological cases the microphone detection may fail to report, for example due to a failure to get a stable measurement. Provide a timeout to cover such cases. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Simplify HPDET based identificationMark Brown
Rather than measuring both HP channels we can simply directly measure the microphone impedance and then rely on MICDET for final confirmation of the presence of a suitable microphone. This improves the overall performance of the identification process. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Don't ground flip when using HPDET identificationMark Brown
This extra check makes the procedure take longer and is of marginal use in identification so do not execute it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Retry HPDET identification for high impedanceMark Brown
Sometimes we can trigger measurements early if contacts are shorted during a slow insertion. As well as debouncing add further robustness by retrying if we get a high impedance measurement for headphones as this can indicate that the headphones were not yet connected. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Tune up HPDET debounceMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Check we report a valid impedanceCharles Keepax
Occasionally we can trigger an interrupt before we have completed impedance measurement, although the valid bit will still be set. This patch spins reading the impedance value until a valid value is seen. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Suppress duplicate JACKDET reportsMark Brown
In cases where we see a brief (dis)connection of the jack detection signals we may see a noop jack insertion or removal where the jack has returned to the original state by the time the interrupt is serviced. Suppress these events in order to save work and avoid confusing the rest of the code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Raise minimum microphone impedance for HPDET methodMark Brown
Ensure greater reliability by increasing the minimum threashold for identifying a microphone. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Allow pull to be disabled on GPIO5 when used for JACKETMark Brown
In some designs an external pull won't be needed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Don't pulse MICBIAS for HPDET identificationMark Brown
There is no need to do this as HPDET identification will cause MICBIAS to be powered down again. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-02extcon: arizona: Allow configuration of button detectionMark Brown
The Arizona button detection circuit is configurable, allowing the system integrator to program a range of thresholds for the buttons supported on the accessory but currently the driver uses the default button ranges and does not provide any flexibility in how this is exposed to the application layer. Provide platform data allowing the user to control this and to map the buttons to keys in the input subsystem. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01extcon: arizona: Attempt more microphone measurementsMark Brown
In some pathological use cases users may insert an accessory very slowly causing multiple indeterminate measurements. Handle this by retrying many measurements before we give up and declare a headphone. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26Merge branch 'char-misc-linus' into char-misc-nextGreg Kroah-Hartman
This picks up the MEI fixes that we need in this branch now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26extcon: arizona: Fix interaction between headphone outputs and identificationMark Brown
Running HPDET while the headphone outputs are enabled can disrupt the operation of HPDET. In order to avoid this HPDET needs to disable the headphone outputs and ASoC needs to not enable them while HPDET is running. For extcon instead of checking if the headphone output is enabled when doing magic application unconditionally disable the output and restore the state which ASoC wants set when undoing the magic. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26extcon: arizona: Factor out magic applicationMark Brown
We have a very similar sequence doing magic writes in several places (one of which missed an update to interlock with the CODEC driver) so factor it out into a function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-13extcon: max77693: Initialize register of MUIC device to bring up it without ↵Chanwoo Choi
platform data This patch set default value of MUIC register to bring up MUIC device. If user don't set some initial value for MUIC device through platform data, extcon-max77693 driver use 'default_init_data' to bring up base operation of MAX77693 MUIC device. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-03-13extcon: max77693: Fix bug of wrong pointer when platform data is not usedChanwoo Choi
This patch fix wrong pointer of platform data. If each machine set platform data for h/w path or delay time of workqueue, this driver happen kernel panic related to null pointer. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-03-13extcon: max8997: Check the pointer of platform data to protect null pointer ↵Chanwoo Choi
error This patch check the pointer of platform data to protect kernel panic when platform data is not used and code clean. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-21Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
2013-02-14extcon: max8997: Use workqueue to check cable state after completing boot of ↵Chanwoo Choi
platform This patch use delayed workqueue to check cable state after a certain time. If extcon-max8997 driver check cable state during booting of platform, this couldn't send the correct notification of cable state to extcon consumer. Alwasys, this driver should check cable state after the completion of platform initialization Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Set default UART/USB path on probeChanwoo Choi
This patch set default H/W line path according to platfomr data. The MAX8997 MUIC device can possibly set UART/USB or UART_AUX /USB_AUX to internal H/W line path of MUIC device. Namely, only one H/W line is used for two operation. For example, if H/W line path of MAX8997 device set UART/USB, micro usb cable is connected to AP(Application Processor) and if H/W line path set UART_AUX/USB_AUX, micro usb cable is connected to CP(Coprocessor). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable typeChanwoo Choi
This patch make max8997_muic_get_cable_type() function to remove duplicate code for checking ADC/Charger cable type because almost internal function need to read adc/chg_type value of MUIC register. Also, remove *_detach() function, extcon-max8997 driver treat attach/detach operation of cable in max8997_*_handler() function. Lastly, this patch move defined constant in header file(include/ linux/mfd/max8997.h, max8997-private.h) because defined constant is only used in the 'extcon-max8997.c'. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Set default of ADC debounce time during initializationChanwoo Choi
This patch set default of ADC Debounce Time(25ms) during probe step. Also, can possible change ADC Debounce Time according to H/W situation by using max8997_set_adc_debounce_time() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Remove duplicate code related to set H/W line pathChanwoo Choi
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Move defined constant to header fileChanwoo Choi
This patch move defined constants to header file(max77693-private.h) because of mask/unmask selectively interrupt of MUIC device according to attribute of H/W board. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 20:57:05 +0000