summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)Author
2010-03-12edac: e752x: add dram scrubbing supportPeter Tyser
Add support to scrub DRAM using the e752x integrated memory scrubbing engine. The e7320/7520/e7525 chipsets support scrubbing at one rate while the i3100 chipset supports a normal and fast rate. A similar patch was originally sent back in 2008: http://sourceforge.net/mailarchive/forum.php?thread_name=1204835866.25206.70.camel@localhost.localdomain&forum_name=bluesmoke-devel This version has the following updates: - Use 16-bit PCI config cycles to access MCHSCRB register e7320/7520/e7525 docs say register is 16bits wide, i3100 says 8. I tested 16bits on the i3100 to be safe. - Recalcuate and round actual scrub rates The changes have been tested on an i3100-based board. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12edac: e752x fsb eccKonstantin Olifer
FSB parity is only supported on the Xeon processor. Previously it was incorrectly enabled for the Celeron as well. Signed-off-by: Konstantin Olifer <kolifer@gmail.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12edac: mpc85xx use resource_size instead of raw mathH Hartley Sweeten
Use resource_size() instead of arithmetic. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Acked-by: Dave Jiang <djiang@mvista.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12edac: mpc85xx improve SDRAM error reportingPeter Tyser
Add the ability to detect the specific data line or ECC line which failed when printing out SDRAM single-bit errors. An example of a single-bit SDRAM ECC error is below: EDAC MPC85xx MC1: Err Detect Register: 0x80000004 EDAC MPC85xx MC1: Faulty data bit: 59 EDAC MPC85xx MC1: Expected Data / ECC: 0x7f80d000_409effa0 / 0x6d EDAC MPC85xx MC1: Captured Data / ECC: 0x7780d000_409effa0 / 0x6d EDAC MPC85xx MC1: Err addr: 0x00031ca0 EDAC MPC85xx MC1: PFN: 0x00000031 Knowning which specific data or ECC line caused an error can be useful in tracking down hardware issues such as improperly terminated signals, loose pins, etc. Note that this feature is only currently enabled for 64-bit wide data buses, 32-bit wide bus support should be added. I don't have any 32-bit wide systems to test on. If someone has one and is willing to give this patch a shot with the check for a 64-bit data bus removed it would be much appreciated and I can re-submit with both 32 and 64 bit buses supported. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Dave Jiang <djiang@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12edac: mpc85xx mask ecc syndrome correctlyPeter Tyser
With a 64-bit wide data bus only the lowest 8-bits of the ECC syndrome are relevant. With a 32-bit wide data bus only the lowest 16-bits are relevant on most architectures. Without this change, the ECC syndrome displayed can be mildly confusing, eg: EDAC MPC85xx MC1: syndrome: 0x25252525 When in reality the ECC syndrome is 0x25. A variety of Freescale manuals say a variety of different things about how to decode the CAPTURE_ECC (syndrome) register. I don't have a system with a 32-bit bus to test on, but I believe the change is correct. It'd be good to get an ACK from someone at Freescale about this change though. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Dave Jiang <djiang@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-07Driver core: Constify struct sysfs_ops in struct kobj_typeEmese Revfy
Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: David Teigland <teigland@redhat.com> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Simplify ECC override handling
2010-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: add __percpu sparse annotations to what's left percpu: add __percpu sparse annotations to fs percpu: add __percpu sparse annotations to core kernel subsystems local_t: Remove leftover local.h this_cpu: Remove pageset_notifier this_cpu: Page allocator conversion percpu, x86: Generic inc / dec percpu instructions local_t: Move local.h include to ringbuffer.c and ring_buffer_benchmark.c module: Use this_cpu_xx to dynamically allocate counters local_t: Remove cpu_local_xx macros percpu: refactor the code in pcpu_[de]populate_chunk() percpu: remove compile warnings caused by __verify_pcpu_ptr() percpu: make accessors check for percpu pointer in sparse percpu: add __percpu for sparse. percpu: make access macros universal percpu: remove per_cpu__ prefix.
2010-03-01amd64_edac: Simplify ECC override handlingBorislav Petkov
No need for clearing ecc_enable_override and checking it in two places. Instead, simply check it during probing and act accordingly. Also, rename the flag bitfields according to the functionality they actually represent. What is more, make sure original BIOS ECC settings are restored when the module is unloaded. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-02-17percpu: add __percpu sparse annotations to what's leftTejun Heo
Add __percpu sparse annotations to places which didn't make it in one of the previous patches. All converions are trivial. These annotations are to make sparse consider percpu variables to be in a different address space and warn if accessed without going through percpu accessors. This patch doesn't affect normal builds. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Neil Brown <neilb@suse.de>
2010-02-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Do not falsely trigger kerneloops
2010-02-11edac: mpc85xx fix build regression by removing unused debug codePeter Tyser
Some unused, unsupported debug code existed in the mpc85xx EDAC driver that resulted in a build failure when CONFIG_EDAC_DEBUG was defined: drivers/edac/mpc85xx_edac.c: In function 'mpc85xx_mc_err_probe': drivers/edac/mpc85xx_edac.c:1031: error: implicit declaration of function 'edac_mc_register_mcidev_debug' drivers/edac/mpc85xx_edac.c:1031: error: 'debug_attr' undeclared (first use in this function) drivers/edac/mpc85xx_edac.c:1031: error: (Each undeclared identifier is reported only once drivers/edac/mpc85xx_edac.c:1031: error: for each function it appears in.) Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-11edac: mpc85xx fix bad page calculationPeter Tyser
Commit b4846251727a38a7f248e41308c060995371dd05 ("edac: mpc85xx add mpc83xx support") accidentally broke how a chip select's first and last page addresses are calculated. The page addresses are being shifted too far right by PAGE_SHIFT. This results in errors such as: EDAC MPC85xx MC1: Err addr: 0x003075c0 EDAC MPC85xx MC1: PFN: 0x00000307 EDAC MPC85xx MC1: PFN out of range! EDAC MC1: INTERNAL ERROR: row out of range (4 >= 4) EDAC MC1: CE - no information available: INTERNAL ERROR The vaule of PAGE_SHIFT is already being taken into consideration during the calculation of the 'start' and 'end' variables, thus it is not necessary to account for it again when setting a chip select's first and last page address. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Ira W. Snyder <iws@ovro.caltech.edu> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-11amd64_edac: Do not falsely trigger kerneloopsBorislav Petkov
An unfortunate "WARNING" in the message amd64_edac dumps when the system doesn't support DRAM ECC or ECC checking is not enabled in the BIOS used to trigger kerneloops which qualified the message as an OOPS thus misleading the users. See, e.g. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/422536 http://bugzilla.kernel.org/show_bug.cgi?id=15238 Downgrade the message level to KERN_NOTICE and fix the formulation. Cc: stable@kernel.org # .32.x Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Doug Thompson <dougthompson@xmission.com>
2010-01-16edac: i5000_edac critical fix panic out of boundsTamas Vincze
EDAC MC0: INTERNAL ERROR: channel-b out of range (4 >= 4) Kernel panic - not syncing: EDAC MC0: Uncorrected Error (XEN) Domain 0 crashed: 'noreboot' set - not rebooting. This happens because FERR_NF_FBD bit 28 is not updated on i5000. Due to that, both bits 28 and 29 may be equal to one, returning channel = 3. As this value is invalid, EDAC core generates the panic. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14568 Signed-off-by: Tamas Vincze <tom@vincze.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-15amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rateRoel Kluin
Add a missing iterator variable thus fixing the conditional of the for-loop in amd64_get_scrub_rate(). Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-24edac, pci: remove pesky debug printkBorislav Petkov
Do not spam the logs needlessly with the sole info that edac_pci_dev_parity_clear is being called. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-24amd64_edac: restrict PCI config space accessBorislav Petkov
Do not access F2x19[0,4] on K8 since they're undefined there. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-24amd64_edac: fix forcing module load/unloadBorislav Petkov
Clear the override flag after force-loading the module. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-24amd64_edac: make driver loading more robustBorislav Petkov
Currently, the module does not initialize fully when the DIMMs aren't ECC but remains still loaded. Propagate the error when no instance of the driver is properly initialized and prevent further loading. Reorganize and polish error handling in amd64_edac_init() while at it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-24amd64_edac: fix driver instance freeingBorislav Petkov
Fix use-after-free errors by pushing all memory-freeing calls to the end of amd64_remove_one_instance(). Reported-by: Darren Jenkins <darrenrjenkins@gmail.com> LKML-Reference: <1261370306.11354.52.camel@ICE-BOX> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-24amd64_edac: fix K8 chip select reportingBorislav Petkov
Fix the case when amd64_debug_display_dimm_sizes() reports only half the amount of DRAM on it because it doesn't account for when the single DCT operates in 128-bit mode and merges chip selects from different DIMMs. Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de> LKML-Reference: <200912112202.48173.johannes.hirte@fem.tu-ilmenau.de> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-16Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: edac, mce, amd: silence GART TLB errors edac, mce: correct corenum reporting
2009-12-16edac, mce, amd: silence GART TLB errorsBorislav Petkov
Although reporting of benign GART TLB errors is disabled in __mcheck_cpu_apply_quirks, those are still being logged, and, as a result, trip up amd64_edac. Pull up reporting check so that machines with loaded edac module bail out early and don't spit fragments into dmesg. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-16edac: i5100 add 6 ranks per channelNils Carlson
Add support for 6 ranks per channel to the i5100 chipset. I have tested the patch as far as possible with correctible errors and things appear good. The DIMM mapping is correct for our board, but boards may differ. Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se> Acked-by: Arthur Jones <ajones@riverbed.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16edac: i5100 add scrubbingNils Carlson
Addscrubbing to the i5100 chipset. The i5100 chipset only supports one scrubbing rate, which is not constant but dependent on memory load. The rate returned by this driver is an estimate based on some experimentation, but is substantially closer to the truth than the speed supplied in the documentation. Also, scrubbing is done once, and then a done-bit is set. This means that to accomplish continuous scrubbing a re-enabling mechanism must be used. I have created the simplest possible such mechanism in the form of a work-queue which will check every five minutes. This interval is quite arbitrary but should be sufficient for all sizes of system memory. Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16edac: i5100 clean controller to channel termsNils Carlson
The i5100 driver uses the word controller instead of channel in a lot of places, this is simply a cleanup of the patch. Signed-off-by: Nils Carlson <nils.carlson@ludd.ltu.se> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15edac, mce: correct corenum reportingBorislav Petkov
Fix core number reporting with NB MCEs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-11x86, msr: Add support for non-contiguous cpumasksBorislav Petkov
The current rd/wrmsr_on_cpus helpers assume that the supplied cpumasks are contiguous. However, there are machines out there like some K8 multinode Opterons which have a non-contiguous core enumeration on each node (e.g. cores 0,2 on node 0 instead of 0,1), see http://www.gossamer-threads.com/lists/linux/kernel/1160268. This patch fixes out-of-bounds writes (see URL above) by adding per-CPU msr structs which are used on the respective cores. Additionally, two helpers, msrs_{alloc,free}, are provided for use by the callers of the MSR accessors. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20091211171440.GD31998@aftab> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-08amd64_edac: bump driver versionBorislav Petkov
This was long overdue ... Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-08amd64_edac: fix use-uninitialised bugAndrew Morton
drivers/edac/amd64_edac.c: In function 'amd64_edac_init': drivers/edac/amd64_edac.c:2840: warning: 'ret' may be used uninitialized in this function Cc: Doug Thompson <dougthompson@xmission.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-08amd64_edac: correct sys address to chip select mappingBorislav Petkov
The routine does the reverse mapping of the error address of a CECC back to the node id, DRAM controller and chip select of the DIMM which caused the error. We should lookup the channel using the syndromes _only_ when the DCTs are ganged so fix that. Also, add an early exit when there's an error while scanning for the csrow thus decreasing indentation levels for better readability. Finally, fixup comments. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-08amd64_edac: add a leaner syndrome decoding algorithmBorislav Petkov
Instead of using the whole syndrome tables for channel decoding, use a set of eigenvectors with which the tables can be generated to search for the syndrome in error. The algorithm operates independently of symbol size and can be used for both x4 and x8 syndromes. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: remove early hw support checkBorislav Petkov
The .probe_valid_hardware low_ops member checked whether the DCTs are in DDR3 mode and bailed out if so. Now that all the needed changes for DDR3 support is in place, remove it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: detect DDR3 memory typeBorislav Petkov
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07edac: add memory types strings for debuggingBorislav Petkov
Instead of using deeply-nested conditionals for dumping the DIMM type in debug mode, add a strings array of the supported DIMM types. This is useful in cases where an edac driver supports multiple DRAM types and is only defined in debug builds. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07edac, mce: update AMD F10h revD checkBorislav Petkov
F10h revD start with model number 8. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: remove unneeded extract_error_address wrapperBorislav Petkov
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: rename StinkyIdentifierBorislav Petkov
SystemAddress -> sys_addr Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: remove superfluous dbg printkBorislav Petkov
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: enhance address to DRAM bank mappingBorislav Petkov
Add cs mode to cs size mapping tables for DDR2 and DDR3 and F10 and all K8 flavors and remove klugdy table of pseudo values. Add a low_ops->dbam_to_cs member which is family-specific and replaces low_ops->dbam_map_to_pages since the pages calculation is a one liner now. Further cleanups, while at it: - shorten family name defines - align amd64_family_types struct members Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: cleanup f10_early_channel_countBorislav Petkov
Do not read DCLR[01] again since this is done in amd64_read_mc_registers() earlier. There can be more than two physical DIMMs present so clamp the channels value to max 2. Also, do not report DCT data width - it is also done earlier. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: dump DIMM sizes on K8 tooBorislav Petkov
Extend f10_debug_display_dimm_sizes to dump the logical DIMMs configuration on K8 revF too. Remove the ganged arg since we print the DCT operating mode (ganged vs unganged) earlier. Also, DCT csrow configuration is relevant therefore dump it as KERN_DEBUG instead of only on debug builds. Remove misleading DIMM output since there's no reliable way of mapping of chip selects to actual physical DIMMs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: cleanup rest of amd64_dump_misc_regsBorislav Petkov
Clarify bitfields description, add PCI config function/offset names to registers for easy reference, simplify code layout, remove unneeded info. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: cleanup DRAM cfg low debug outputBorislav Petkov
Carve out the register-specific debug statements into a separate function, clarify meanings of the single bitfields in the register, remove irrelevant output and macros. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: wrap-up pci config read error handlingBorislav Petkov
Add a pci config read wrapper for signaling pci config space access errors instead of them being visible only on a debug build. This is important on amd64_edac since it uses all those pci config register values to access the DRAM/DIMM configuration of the nodes. In addition, the wrapper makes a _lot_ (look at the diffstat!) of error handling code superfluous and improves much of the overall code readability by removing error handling details out of the way. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: unify MCGCTL ECC switchingBorislav Petkov
Unify almost identical code into one function and remove NUMA-specific usage (specifically cpumask_of_node()) in favor of generic topology methods. Remove unused defines, while at it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07cpumask: use modern cpumask style in drivers/edac/amd64_edac.cRusty Russell
cpumask_t -> struct cpumask, and don't put one on the stack. (Note: this is actually on the stack unless CONFIG_CPUMASK_OFFSTACK=y). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: make DRAM regions output more human-readableBorislav Petkov
Do not shift the TOP_MEM and TOP_MEM2 values by 23 but rather save the whole 64-bit value read from the MSR. Although the TOP_MEM/TOP_MEM2 bits are only a subset of the 64bit register, the values are correct since the remaining bits are Read-As-Zero and no shifting is needed. Also, cleanup DRAM base/limit debug output. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-12-07amd64_edac: clarify DRAM CTL debug reportingBorislav Petkov
Make debug info formulations about the DRAM and DCT configuration of the machine more human readable. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 17:40:58 +0000