summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)Author
2018-11-02Merge tag 'edac_for_4.20_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull more EDAC updates from Borislav Petkov: "The second part of the EDAC pile which contains the ADXL user and a build fix which addresses a not-so-sensical .config but fixes randconfig builds people do: - skx_edac: Address translation for NVDIMMs (Tony Luck and Qiuxu Zhuo) - ACPI_ADXL build fix" [ I don't think "sensical" is a word, particularly when used in the context of actually meaning "nonsensical", but I like it - Linus ] * tag 'edac_for_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, skx: Fix randconfig builds EDAC, skx_edac: Add address translation for non-volatile DIMMs
2018-10-31EDAC, skx: Fix randconfig buildsBorislav Petkov
The driver depends on the ADXL component glue and selects it. However, ADXL itself implicitly depends on ACPI and in nonsensical randconfig builds like this: # CONFIG_ACPI is not set CONFIG_ACPI_ADXL=y where ACPI is not enabled, the build fails with: drivers/edac/skx_edac.o: In function `skx_mce_check_error': skx_edac.c:(.text+0xab): undefined reference to `adxl_decode' drivers/edac/skx_edac.o: In function `skx_init': skx_edac.c:(.init.text+0x8bf): undefined reference to `adxl_get_component_names' make: *** [vmlinux] Error 1 Add stubs for that case so that the build succeeds. CONFIG_ACPI=n doesn't make any sense for real configurations but this fix will at least silence randconfig builds. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
2018-10-29Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ...
2018-10-26Merge tag 'devicetree-for-4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...
2018-10-25EDAC, skx_edac: Add address translation for non-volatile DIMMsQiuxu Zhuo
Currently, this driver doesn't support address translation for non-volatile DIMMs. The ACPI ADXL DSM method provides address translation for both volatile and non-volatile DIMMs. Enable it to use the ACPI DSM methods if they are supported and there are non-volatile DIMMs populated on the system. Co-developed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: arozansk@redhat.com CC: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1540106336-5212-1-git-send-email-qiuxu.zhuo@intel.com
2018-10-25Merge tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: "The EDAC tree was busier than usual this cycle as the shortlog below shows. Also, this pull request is carrying an ACPI DSM driver which is used to ask the platform to supply the DIMM location of a reported hardware error and thus simplify all the EDAC logic when trying to map the error address to the respective DIMM. Core EDAC updates: - amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin) Hygon Dhyana support (Pu Wen) - sb_edac: New maintainer + fixes (Tony Luck) Error reporting improvements and fixes (Qiuxu Zhuo) - ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM error accounting (Fan Wu) - altera_edac: Stratix10 support and refactoring (Thor Thayer) Out of tree addition: - acpi_adxl: Address Translation interface using an ACPI DSM (Tony Luck) - the usual amount of other misc fixes and cleanups all over" * tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits) ACPI/ADXL: Add address translation interface using an ACPI DSM EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr() EDAC, skx_edac: Fix logical channel intermediate decoding EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting EDAC, altera: Work around int-to-pointer-cast warnings EDAC, amd64: Add Hygon Dhyana support EDAC: Raise the maximum number of memory controllers arm64: dts: stratix10: Add peripheral EDAC nodes EDAC, altera: Add Stratix10 peripheral support EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine arm64: dts: stratix10: Add SDRAM node EDAC, altera: Combine Stratix10 and Arria10 probe functions arm64: dts: stratix10: Additions to EDAC System Manager EDAC, i7core: Remove set but not used variable pvt EDAC, ghes: Use CPER module handles to locate DIMMs EDAC: Correct DIMM capacity unit symbol EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions EDAC, sb_edac: Fix reporting for patrol scrubber errors EDAC, sb_edac: Return early on ADDRV bit and address type test MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c ...
2018-10-23Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-13EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr()Dan Carpenter
Fix memory leak in L2c threaded interrupt handler. [ bp: Rewrite commit message. ] Fixes: 41003396f932 ("EDAC, thunderx: Add Cavium ThunderX EDAC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: David Daney <david.daney@cavium.com> CC: Jan Glauber <jglauber@cavium.com> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: Sergey Temerkhanov <s.temerkhanov@gmail.com> CC: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20181013102843.GG16086@mwanda
2018-10-09EDAC, skx_edac: Fix logical channel intermediate decodingQiuxu Zhuo
The code "lchan = (lchan << 1) | ~lchan" for logical channel intermediate decoding is wrong. The wrong intermediate decoding result is {0xffffffff, 0xfffffffe}. Fix it by replacing '~' with '!'. The correct intermediate decoding result is {0x1, 0x2}. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> CC: Aristeu Rozanski <aris@redhat.com> CC: Mauro Carvalho Chehab <mchehab@kernel.org> CC: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20181009172025.18594-1-tony.luck@intel.com
2018-10-02x86/cpu: Sanitize FAM6_ATOM namingPeter Zijlstra
Going primarily by: https://en.wikipedia.org/wiki/List_of_Intel_Atom_microprocessors with additional information gleaned from other related pages; notably: - Bonnell shrink was called Saltwell - Moorefield is the Merriefield refresh which makes it Airmont The general naming scheme is: FAM6_ATOM_UARCH_SOCTYPE for i in `git grep -l FAM6_ATOM` ; do sed -i -e 's/ATOM_PINEVIEW/ATOM_BONNELL/g' \ -e 's/ATOM_LINCROFT/ATOM_BONNELL_MID/' \ -e 's/ATOM_PENWELL/ATOM_SALTWELL_MID/g' \ -e 's/ATOM_CLOVERVIEW/ATOM_SALTWELL_TABLET/g' \ -e 's/ATOM_CEDARVIEW/ATOM_SALTWELL/g' \ -e 's/ATOM_SILVERMONT1/ATOM_SILVERMONT/g' \ -e 's/ATOM_SILVERMONT2/ATOM_SILVERMONT_X/g' \ -e 's/ATOM_MERRIFIELD/ATOM_SILVERMONT_MID/g' \ -e 's/ATOM_MOOREFIELD/ATOM_AIRMONT_MID/g' \ -e 's/ATOM_DENVERTON/ATOM_GOLDMONT_X/g' \ -e 's/ATOM_GEMINI_LAKE/ATOM_GOLDMONT_PLUS/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: dave.hansen@linux.intel.com Cc: len.brown@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-09-29EDAC, {i7core,sb,skx}_edac: Fix uncorrected error countingTony Luck
The count of errors is picked up from bits 52:38 of the machine check bank status register. But this is the count of *corrected* errors. If an uncorrected error is being logged, the h/w sets this field to 0. Which means that when edac_mc_handle_error() is called, the EDAC core will carefully add zero to the appropriate uncorrected error counts. Signed-off-by: Tony Luck <tony.luck@intel.com> [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Cc: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180928213934.19890-1-tony.luck@intel.com
2018-09-28edac: cpc925: use for_each_of_cpu_node iteratorRob Herring
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". The error messages are removed in the process as it's not the driver's job to be checking cpu nodes. Any problems with cpu nodes should be noticed by the architecture code. Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac@vger.kernel.org Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-28EDAC, altera: Work around int-to-pointer-cast warningsArnd Bergmann
The altera edac driver passes a token from a DT resource as resource_size_t into an SMC call, but casts it to an __iomem pointer and then a plain void pointer inbetween, mixing three or four incompatible types in the process. The compiler complains about one of the conversions: drivers/edac/altera_edac.c: In function 'altr_init_a10_ecc_block': drivers/edac/altera_edac.c:1053:10: error: cast to pointer from integer of \ different size [-Werror=int-to-pointer-cast] base = (void __iomem *)res.start; ^ drivers/edac/altera_edac.c: In function 'altr_edac_a10_probe': drivers/edac/altera_edac.c:2062:10: error: cast to pointer from integer of \ different size [-Werror=int-to-pointer-cast] base = (void __iomem *)res.start; Using a static checker probably also notices the __iomem cast. Solving this properly isn't trivial, but simply casting to a 'uintptr_t' instead of 'void __iomem *' makes it less wrong and should avoid the warnings. Fixes: d5fc9125566c ("EDAC, altera: Combine Stratix10 and Arria10 probe functions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: David Frey <dpfrey@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/20180927100949.973078-1-arnd@arndb.de
2018-09-27EDAC, amd64: Add Hygon Dhyana supportPu Wen
Add support for Hygon Dhyana CPU to EDAC. Signed-off-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: mchehab@kernel.org Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: thomas.lendacky@amd.com Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/9d71061301177822bc55b3bfd44f91057458d886.1537533369.git.puwen@hygon.cn
2018-09-25EDAC, altera: Add Stratix10 peripheral supportThor Thayer
Add a new peripheral ECC error injection algorithm for Stratix10 and some Arria10 peripherals. Inject a single bit error and upon readback, it will be corrected and the SBE IRQ handler will be called. Add regmap selection for Stratix10 or Arria10 peripheral device memory initialization. Add checks for both Arria10 and Stratix10 to the peripheral ECC setup. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: dinguyen@kernel.org Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: mchehab@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/1537883342-30180-6-git-send-email-thor.thayer@linux.intel.com
2018-09-25EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routineThor Thayer
Change Stratix10 regmap to use offsets from a base to match the Arria10 regmap and allow re-use of the Arria10 functions. Only the regmap initialization differs (Arria10 mmio_regmap vs Stratix10 custom regmap). Modify the SDRAM probe function to handle Stratix10. Remove the Stratix10 offset defines if Arria10 can be used. Remove the unused Stratix10 probe function. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: dinguyen@kernel.org Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: mchehab@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/1537883342-30180-5-git-send-email-thor.thayer@linux.intel.com
2018-09-25EDAC, altera: Combine Stratix10 and Arria10 probe functionsThor Thayer
On Stratix10, the ECC offsets are similar to the existing Arria10 functions and this can be leveraged to simplify the EDAC driver as follows: 1. Fold Stratix10 specifics into Arria10 structures and functions. 2. Implement the Stratix10 System Manager register accesses using a custom regmap to allow use with the Arria10 System Manager regmaps. 3. Stratix10 double bit errors are implemented as SError instead of interrupts so use a panic notifier. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: dinguyen@kernel.org Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: mchehab@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/1537883342-30180-3-git-send-email-thor.thayer@linux.intel.com
2018-09-25EDAC, i7core: Remove set but not used variable pvtYueHaibing
Remove the unused local variable pvt: drivers/edac/i7core_edac.c: In function 'i7core_mce_check_error': drivers/edac/i7core_edac.c:1818:21: warning: variable 'pvt' set but not used \ [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1537841043-108267-1-git-send-email-yuehaibing@huawei.com
2018-09-22EDAC, ghes: Use CPER module handles to locate DIMMsFan Wu
Use SMBIOS module handle type 17, on platforms which provide valid ones, to locate the corresponding DIMM and thus have per-DIMM error counter updates. Signed-off-by: Fan Wu <wufan@codeaurora.org> [ Massage commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Tyler Baicar <baicar.tyler@gmail.com> Reviewed-by: James Morse <james.morse@arm.com> Tested-by: Toshi Kani <toshi.kani@hpe.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: baicar.tyler@gmail.com Cc: john.garry@huawei.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: shiju.jose@huawei.com Cc: tanxiaofei@huawei.com Cc: wanghuiqiang@huawei.com Link: http://lkml.kernel.org/r/1537322340-1860-1-git-send-email-wufan@codeaurora.org
2018-09-22EDAC: Correct DIMM capacity unit symbolQiuxu Zhuo
The {i3200|i7core|sb|skx}_edac drivers show DIMM capacity using the wrong unit symbol: 'Mb' - megabit. Fix them by replacing 'Mb' with 'MiB' - mebibyte. [Tony: These are all "edac_dbg()" messages, so this won't break scripts that parse console logs.] Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/20180919003433.16475-1-tony.luck@intel.com
2018-09-15EDAC, sb_edac: Fix signedness bugs in *_get_ha() functionsLuck, Tony
A static checker gave the following warnings: drivers/edac/sb_edac.c:1030 ibridge_get_ha() warn: signedness bug returning '(-22)' drivers/edac/sb_edac.c:1037 knl_get_ha() warn: signedness bug returning '(-22)' Both because the functions are declared to return a "u8", but try to return -EINVAL for the error case. Fix by returning 0xff (since the caller doesn't look at, or pass on, the return value). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180914201905.GA30946@agluck-desk Signed-off-by: Borislav Petkov <bp@suse.de>
2018-09-13drivers: edac: Add EDAC driver support for QCOM SoCsChannagoud Kadabi
Add error reporting driver for Single Bit Errors (SBEs) and Double Bit Errors (DBEs). As of now, this driver supports error reporting for Last Level Cache Controller (LLCC) of Tag RAM and Data RAM. Interrupts are triggered when the errors happen in the cache, the driver handles those interrupts and dumps the syndrome registers. Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Co-developed-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-09-11EDAC, sb_edac: Fix reporting for patrol scrubber errorsQiuxu Zhuo
sb_edac sometimes reports the wrong DIMM for a memory error found by the patrol scrubber. That is because the hardware provides only a 4KB page-aligned address for the error case. This means that the EDAC driver will point at the DIMM matching offset 0x0 in the 4KB page, but because of interleaving across channels and ranks, the actual DIMM involved may be different if the error is on some other cache line within the page. Therefore, reconstruct the socket/iMC/channel information from the "mce" structure passed to the EDAC driver. The DIMM cannot be determined, so pass "dimm=-1" to the EDAC core. It will report that all the DIMMs on that channel may be affected. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180907230828.13901-3-tony.luck@intel.com [ Improve comments on the functions to convert bank number to memory controller number. Minor cleanup to commit message. ] Signed-off-by: Tony Luck <tony.luck@intel.com> [ Massage commit message more. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2018-09-11EDAC, sb_edac: Return early on ADDRV bit and address type testQiuxu Zhuo
Users of the mce_register_decode_chain() are called for every logged error. EDAC drivers should check: 1) Is this a memory error? [bit 7 in status register] 2) Is there a valid address? [bit 58 in status register] 3) Is the address a system address? [bitfield 8:6 in misc register] The sb_edac driver performed test "1" twice. Waited far too long to perform check "2". Didn't do check "3" at all. Fix it by moving the test for valid address from sbridge_mce_output_error() into sbridge_mce_check_error() and add a test for the type immediately after. Delete the redundant check for the type of the error from sbridge_mce_output_error(). Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180907230828.13901-2-tony.luck@intel.com [ Re-word commit message. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2018-09-07regmap: split up regmap_config.use_single_rwDavid Frey
Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03EDAC: Get rid of custom ICPU() macroAndy Shevchenko
Replace custom grown macro with generic INTEL_CPU_FAM6() one. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180831082341.72363-1-andriy.shevchenko@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-08-27EDAC, amd64: Add Family 17h, models 10h-2fh supportMichael Jin
Add new device IDs for family 17h, models 10h-2fh. This is required by amd64_edac_mod in order to properly detect PCI device functions 0 and 6. Signed-off-by: Michael Jin <mikhail.jin@gmail.com> Reviewed-by: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20180816192840.31166-1-mikhail.jin@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-08-17EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]Takashi Iwai
The edac_mem_types[] array misses a MEM_LRDDR4 entry, which leads to NULL pointer dereference when accessed via sysfs or such. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20180810141426.8918-1-tiwai@suse.de Fixes: 1e8096bb2031 ("EDAC: Add LRDDR4 DRAM type") Signed-off-by: Borislav Petkov <bp@suse.de>
2018-07-25EDAC, sb_edac: Add support for systems with segmented PCI busesMasayoshi Mizuma
Extend the driver to check whether segment number and bus number matches when deciding how to group memory controller PCI devices to CPU sockets. Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180724190213.26359-1-msys.mizuma@gmail.com [ Cleanup commit message. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2018-07-09EDAC, thunderx: Remove VLA usageKees Cook
In the quest to remove all stack VLA usage from the kernel[1], switch to using a kmalloc-allocated buffer instead of stack space. This should be fine since the existing routine is allocating memory too. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jan Glauber <jglauber@cavium.com> Cc: David Daney <david.daney@cavium.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180629184850.GA37464@beast Link: https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com [1] Signed-off-by: Borislav Petkov <bp@suse.de>
2018-06-18EDAC, i7core: Fix memleaks and use-after-free on probe and removeJohan Hovold
Make sure to free and deregister the addrmatch and chancounts devices allocated during probe in all error paths. Also fix use-after-free in a probe error path and in the remove success path where the devices were being put before before deregistration. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 356f0a30860d ("i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy") Link: http://lkml.kernel.org/r/20180612124335.6420-2-johan@kernel.org Signed-off-by: Borislav Petkov <bp@suse.de>
2018-06-17EDAC: Fix memleak in module init error pathJohan Hovold
Make sure to use put_device() to free the initialised struct device so that resources managed by driver core also gets released in the event of a registration failure. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Denis Kirjanov <kirjanov@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 2d56b109e3a5 ("EDAC: Handle error path in edac_mc_sysfs_init() properly") Link: http://lkml.kernel.org/r/20180612124335.6420-1-johan@kernel.org Signed-off-by: Borislav Petkov <bp@suse.de>
2018-06-17EDAC, altera: Fix an error handling path in altr_s10_sdram_probe()Christophe JAILLET
If regmap_write() fails, we should release some resources as done in all the other error handling paths of the function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180610174532.22071-1-christophe.jaillet@wanadoo.fr Fixes: e9918d7fafae ("EDAC, altera: Handle SDRAM Uncorrectable Errors on Stratix10") Signed-off-by: Borislav Petkov <bp@suse.de>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-21EDAC, ghes: Make platform-based whitelisting x86-onlyBorislav Petkov
ARM machines all have DMI tables so if they request hw error reporting through GHES, then the driver should be able to detect DIMMs and report errors successfully (famous last words :)). Make the platform-based list x86-specific so that ghes_edac can load on ARM. Reported-by: Qiang Zheng <zhengqiang10@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: James Morse <james.morse@arm.com> Tested-by: James Morse <james.morse@arm.com> Tested-by: Qiang Zheng <zhengqiang10@huawei.com> Link: https://lkml.kernel.org/r/1526039543-180996-1-git-send-email-zhengqiang10@huawei.com
2018-05-15EDAC, altera: Fix ARM64 build warningThor Thayer
The kbuild test robot reported the following warning: drivers/edac/altera_edac.c: In function 'ocram_free_mem': drivers/edac/altera_edac.c:1410:42: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] gen_pool_free((struct gen_pool *)other, (u32)p, size); ^ After adding support for ARM64 architectures, the unsigned long parameter is 64 bits and causes a build warning on 64-bit configs. Fix by casting to the correct size (unsigned long) instead of u32. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: c3eea1942a16 ("EDAC, altera: Add Altera L2 cache and OCRAM support") Link: http://lkml.kernel.org/r/1526317441-4996-1-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-14EDAC, skx: Fix skx_edac build error when ACPI_NFIT=mRandy Dunlap
Prevent build error when CONFIG_ACPI_NFIT=m and CONFIG_EDAC_SKX=y by limiting EDAC_SKX based on how ACPI_NFIT is set. Fixes this build error: drivers/edac/skx_edac.o: In function `get_nvdimm_info': ../drivers/edac/skx_edac.c:399: undefined reference to `nfit_get_smbios_id' Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 58ca9ac1463d ("EDAC, skx_edac: Detect non-volatile DIMMs") Link: http://lkml.kernel.org/r/3af91354-8e19-d2af-1bba-ced8dce053f1@infradead.org Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-12EDAC, ghes: Use BIT() macroBorislav Petkov
... for improved readability. Also, add a local mask variable for the same reason. No functional changes. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
2018-05-12EDAC, ghes: Add DDR4 and NVDIMM memory typesToshi Kani
The ghes_edac driver obtains memory type from SMBIOS type 17, but it does not recognize DDR4 and NVDIMM types. Add support of DDR4 and NVDIMM types. NVDIMM type is denoted by memory type DDR3/4 and non-volatile. Reported-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180509222030.9299-1-toshi.kani@hpe.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-12EDAC, altera: Handle SDRAM Uncorrectable Errors on Stratix10Thor Thayer
On Stratix10, uncorrectable errors are routed to the SError exception instead of the IRQ exceptions. In Stratix10, uncorrectable SErrors must be treated as fatal and will cause a panic. Older Altera/Intel parts printed out a message for UE so do that here using the notifier framework. Record the UE in sticky registers that retain the state through a reset. Check these registers on probe and printout the error on startup. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: mchehab@kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1526079610-5527-1-git-send-email-thor.thayer@linux.intel.com [ Remove unused var in s10_edac_dberr_handler(), reorder args. ] Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-12EDAC, altera: Add support for Stratix10 SDRAM EDACThor Thayer
Support for Stratix10 SDRAM ECC requires the use of SMC calls to Secure Monitor for accessing registers. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: catalin.marinas@arm.com Cc: devicetree@vger.kernel.org Cc: dinguyen@kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: robh+dt@kernel.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1524854238-19394-3-git-send-email-thor.thayer@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-12EDAC, ghes: Remove unused argument to ghes_edac_report_mem_error()Alexandru Gagniuc
The use of the @ghes argument was removed in a previous commit, but function signature was not updated to reflect this. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Cc: linux-acpi@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180430213358.8319-1-mr.nuke.me@gmail.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-04EDAC, i7core: Fix spelling mistake: "redundacy" -> "redundancy"Colin Ian King
Trivial fix to spelling mistake in err string. Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: kernel-janitors@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180504113804.17103-1-colin.king@canonical.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-02EDAC, ghes: Add a null pointer check in ghes_edac_unregister()Sughosh Ganu
Add a null check for ghes_pvt, before dereferencing it. The pointer could still be null in case the return path is taken before initialising ghes_pvt in the registration function. Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: lkml <linux-kernel@vger.kernel.org> Link: http://lkml.kernel.org/r/1524737809-24475-1-git-send-email-sughosh.ganu@arm.com Signed-off-by: Borislav Petkov <bp@suse.de>
2018-05-02ghes, EDAC: Fix ghes_edac registrationBorislav Petkov
Tony reported seeing "Internal error: Can't find EDAC structure" when injecting correctable errors due to the fact that ghes_edac would still load even if the whitelist won't hit. Drop the pr_err() in ghes_edac_report_mem_error() for now due to the hacky way how ghes_edac depends on ghes.c. While at it, make ghes_edac_register() return an error if it doesn't hit in the whitelist as it is the only sensible thing to do in that situation. Furthermore, move the call to it to happen last in ghes_probe() so that GHES initializing properly does not depend on ghes_edac init at all as latter is only reporting errors and not required for GHES's proper functioning. Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Tested-by: Sughosh Ganu <sughosh.ganu@arm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20180420182015.zao3olss4tvvlxki@agluck-desk
2018-04-05Merge tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull EDAC updates from Borislav Petkov: "Noteworthy is the NVDIMM support: - NVDIMM support to EDAC (Tony Luck) - misc fixes" * tag 'edac_for_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, sb_edac: Remove variable length array usage EDAC, skx_edac: Detect non-volatile DIMMs firmware, DMI: Add function to look up a handle and return DIMM size acpi, nfit: Add function to look up nvdimm device and provide SMBIOS handle EDAC: Add new memory type for non-volatile DIMMs EDAC: Drop duplicated array of strings for memory type names EDAC, layerscape: Allow building for LS1021A
2018-04-02Merge tag 'arch-removal' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pul removal of obsolete architecture ports from Arnd Bergmann: "This removes the entire architecture code for blackfin, cris, frv, m32r, metag, mn10300, score, and tile, including the associated device drivers. I have been working with the (former) maintainers for each one to ensure that my interpretation was right and the code is definitely unused in mainline kernels. Many had fond memories of working on the respective ports to start with and getting them included in upstream, but also saw no point in keeping the port alive without any users. In the end, it seems that while the eight architectures are extremely different, they all suffered the same fate: There was one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem, which was more costly than licensing newer off-the-shelf CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems that all the SoC product lines are still around, but have not used the custom CPU architectures for several years at this point. In contrast, CPU instruction sets that remain popular and have actively maintained kernel ports tend to all be used across multiple licensees. [ See the new nds32 port merged in the previous commit for the next generation of "one company in charge of an SoC line, a CPU microarchitecture and a software ecosystem" - Linus ] The removal came out of a discussion that is now documented at https://lwn.net/Articles/748074/. Unlike the original plans, I'm not marking any ports as deprecated but remove them all at once after I made sure that they are all unused. Some architectures (notably tile, mn10300, and blackfin) are still being shipped in products with old kernels, but those products will never be updated to newer kernel releases. After this series, we still have a few architectures without mainline gcc support: - unicore32 and hexagon both have very outdated gcc releases, but the maintainers promised to work on providing something newer. At least in case of hexagon, this will only be llvm, not gcc. - openrisc, risc-v and nds32 are still in the process of finishing their support or getting it added to mainline gcc in the first place. They all have patched gcc-7.3 ports that work to some degree, but complete upstream support won't happen before gcc-8.1. Csky posted their first kernel patch set last week, their situation will be similar [ Palmer Dabbelt points out that RISC-V support is in mainline gcc since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]" This really says it all: 2498 files changed, 95 insertions(+), 467668 deletions(-) * tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits) MAINTAINERS: UNICORE32: Change email account staging: iio: remove iio-trig-bfin-timer driver tty: hvc: remove tile driver tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers serial: remove tile uart driver serial: remove m32r_sio driver serial: remove blackfin drivers serial: remove cris/etrax uart drivers usb: Remove Blackfin references in USB support usb: isp1362: remove blackfin arch glue usb: musb: remove blackfin port usb: host: remove tilegx platform glue pwm: remove pwm-bfin driver i2c: remove bfin-twi driver spi: remove blackfin related host drivers watchdog: remove bfin_wdt driver can: remove bfin_can driver mmc: remove bfin_sdh driver input: misc: remove blackfin rotary driver input: keyboard: remove bf54x driver ...
2018-03-26edac: remove tile driverArnd Bergmann
The Tile architecture is obsolete and getting removed from the kernel, this driver appears to only be used there, and not on the ARM based successors (Tile-Mx, BlueField), so we should remove it as well. Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-17EDAC, sb_edac: Remove variable length array usageGustavo A. R. Silva
In preparation for enabling -Wvla, remove VLA and replace it with a fixed-length array instead. Also, remove max_interleave as it is no longer needed. Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20180314182131.GA25259@embeddedgus Signed-off-by: Borislav Petkov <bp@suse.de>
2018-03-15EDAC, skx_edac: Detect non-volatile DIMMsTony Luck
This just covers the topology function of the EDAC driver. We locate which DIMM slots are populated with NVDIMMs and query the NFIT and SMBIOS tables to get the size. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linux-acpi@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-nvdimm@lists.01.org Link: http://lkml.kernel.org/r/20180312182430.10335-6-tony.luck@intel.com Signed-off-by: Borislav Petkov <bp@suse.de>