summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)Author
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-10-23EDAC, GHES: Update ghes error record infoChen, Gong
In latest UEFI spec(by now it's 2.4) there are some new fields for memory error reporting. Add these new fields for ghes_edac interface. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-23ACPI, APEI, CPER: Add UEFI 2.4 support for memory errorChen, Gong
In latest UEFI spec(by now it is 2.4) memory error definition for CPER (UEFI 2.4 Appendix N Common Platform Error Record) adds some new fields. These fields help people to locate memory error to an actual DIMM location. Original-author: Tony Luck <tony.luck@intel.com> Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-21bitops: Introduce a more generic BITMASK macroChen, Gong
GENMASK is used to create a contiguous bitmask([hi:lo]). It is implemented twice in current kernel. One is in EDAC driver, the other is in SiS/XGI FB driver. Move it to a more generic place for other usage. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-09drivers: clean-up prom.h implicit includesRob Herring
Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
Pull Tile arch updates from Chris Metcalf: "These changes bring in a bunch of new functionality that has been maintained internally at Tilera over the last year, plus other stray bits of work that I've taken into the tile tree from other folks. The changes include some PCI root complex work, interrupt-driven console support, support for performing fast-path unaligned data fixups by kernel-based JIT code generation, CONFIG_PREEMPT support, vDSO support for gettimeofday(), a serial driver for the tilegx on-chip UART, KGDB support, more optimized string routines, support for ftrace and kprobes, improved ASLR, and many bug fixes. We also remove support for the old TILE64 chip, which is no longer buildable" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits) tile: refresh tile defconfig files tile: rework <asm/cmpxchg.h> tile PCI RC: make default consistent DMA mask 32-bit tile: add null check for kzalloc in tile/kernel/setup.c tile: make __write_once a synonym for __read_mostly tile: remove support for TILE64 tile: use asm-generic/bitops/builtin-*.h tile: eliminate no-op "noatomichash" boot argument tile: use standard tile_bundle_bits type in traps.c tile: simplify code referencing hypervisor API addresses tile: change <asm/system.h> to <asm/switch_to.h> in comments tile: mark pcibios_init() as __init tile: check for correct compiler earlier in asm-offsets.c tile: use standard 'generic-y' model for <asm/hw_irq.h> tile: use asm-generic version of <asm/local64.h> tile PCI RC: add comment about "PCI hole" problem tile: remove DEBUG_EXTRA_FLAGS kernel config option tile: add virt_to_kpte() API and clean up and document behavior tile: support FRAME_POINTER tile: support reporting Tilera hypervisor statistics ...
2013-08-27amd64_edac: Fix incorrect wraparoundsAravind Gopalakrishnan
dct_base and dct_limit obtain 32 bit register values when they read their respective pci config space registers. A left shift beyond 32 bits will cause them to wrap around. Similar case for chan_addr as can be seen from the bug report (link below). In the patch, we rectify this by casting chan_addr to u64 and by comparing dct_base and dct_limit against properly shifted sys_addr in order to compare the correct bits. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/20130819132302.GA12171@elgon.mountain Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-27amd64_edac: Correct erratum 505 rangeBorislav Petkov
Basically we want to cover all 0x0-0xf models, i.e. Orochi and later. Cc: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Link: http://lkml.kernel.org/r/20130819192321.GF4165@pd.tnic Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-15Merge tag 'edac_for_3.12' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras Pull RAS/EDAC updates from Boris Petkov: "An amd64_edac fix for single channel configurations + trivial cleanups courtesy of Jingoo Han." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-14cpc925_edac: Use proper array terminationJingoo Han
The struct should be terminated by using empty braces in order to fix the following sparse warning. drivers/edac/cpc925_edac.c:792:10: warning: Using plain integer as NULL pointer Signed-off-by: Jingoo Han <jg1.han@samsung.com> [ drop obvious comment ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-12amd64_edac: Get rid of boot_cpu_data accessesBorislav Petkov
Now that we cache (family, model, stepping) locally, use them instead of boot_cpu_data. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-12amd64_edac: Add ECC decoding support for newer F15h modelsAravind Gopalakrishnan
On newer models, support has been included for upto 4 DCT's, however, only DCT0 and DCT3 are currently configured (cf BKDG Section 2.10). Also, the routing DRAM Requests algorithm is different for F15h M30h. Thus it is cleaner to use a brand new function rather than adding quirks to the more generic f1x_match_to_this_node(). Refer to "2.10.5 DRAM Routing Requests" in the BKDG for further info. Tested on Fam15h M30h with ECC turned on using mce_amd_inj facility and verified to be functionally correct. While at it, verify if erratum workarounds for E505 and E637 still hold. From email conversations within AMD, the current status of the errata is: * Erratum 505: fixed in model 0x1, stepping 0x1 and later. * Erratum 637: not fixed. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> [ Cleanups, corrections ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-09x38_edac: Make a local function staticJingoo Han
Make a local function static in order to fix the following sparse warning: drivers/edac/x38_edac.c:252:14: warning: symbol 'x38_map_mchbar' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> [ Boris: Correct commit message ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-08-09i3200_edac: Make a local function staticJingoo Han
This local symbol is used only in this file. Fix the following sparse warnings: drivers/edac/i3200_edac.c:264:14: warning: symbol 'i3200_map_mchbar' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-07-29amd64_edac: Fix single-channel setupsBorislav Petkov
It can happen that configurations are running in a single-channel mode even with a dual-channel memory controller, by, say, putting the DIMMs only on the one channel and leaving the other empty. This causes a problem in init_csrows which implicitly assumes that when the second channel is enabled, i.e. channel 1, the struct dimm hierarchy will be present. Which is not. So always allocate two channels unconditionally. This provides for the nice side effect that the data structures are initialized so some day, when memory hotplug is supported, it should just work out of the box when all of a sudden a second channel appears. Reported-and-tested-by: Roger Leigh <rleigh@debian.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-07-24EDAC: Replace strict_strtol() with kstrtol()Jingoo Han
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-07-23EDAC: Fix lockdep splatBorislav Petkov
Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-17edac: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-07-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
2013-07-03Merge tag 'edac_for_3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
Pull AMD EDAC update from Borislav Petkov: "Add MCE signatures for family 0x15, models 30-3f" * tag 'edac_for_3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, MCE, AMD: Add an MCE signature for new Fam15h models EDAC: Replace strict_strtoul() with kstrtoul()
2013-06-10MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOCDavid Daney
CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON. This allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC. Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can get the same configuration with CAVIUM_OCTEON_SOC. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-edac@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: netdev@vger.kernel.org Cc: spi-devel-general@lists.sourceforge.net Cc: devel@driverdev.osuosl.org Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Patchwork: https://patchwork.linux-mips.org/patch/5295/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-08EDAC, MCE, AMD: Add an MCE signature for new Fam15h modelsAravind Gopalakrishnan
Add a new error signature for Family 15h, models 30h-3fh. Patch has been tested on Fam15h using mce_amd_inj facility and has been verified to work correctly. Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com> [ cleanup commit message and error string ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-06-08EDAC: Replace strict_strtoul() with kstrtoul()Jingoo Han
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-06-03Finally eradicate CONFIG_HOTPLUGStephen Rothwell
Ever since commit 45f035ab9b8f ("CONFIG_HOTPLUG should be always on"), it has been basically impossible to build a kernel with CONFIG_HOTPLUG turned off. Remove all the remaining references to it. Cc: Russell King <linux@arm.linux.org.uk> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-21amd64_edac: Fix bogus sysfs file permissionsBorislav Petkov
Fix yet another issue caught by 8f46baaa7ec6c ("base: core: WARN() about bogus permissions on device attributes"). Signed-off-by: Borislav Petkov <bp@suse.de>
2013-05-09Merge tag 'edac_fixes_for_3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull two small EDAC fixes from Borislav Petkov. * tag 'edac_fixes_for_3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC: Don't give write permission to read-only files EDAC, mc_sysfs.c: Fix string array pointer types
2013-05-09EDAC: Don't give write permission to read-only filesSrivatsa S. Bhat
I get the following warning on boot: ------------[ cut here ]------------ WARNING: at drivers/base/core.c:575 device_create_file+0x9a/0xa0() Hardware name: -[8737R2A]- Write permission without 'store' ... </snip> Drilling down, this is related to dynamic channel ce_count attribute files sporting a S_IWUSR mode without a ->store() function. Looking around, it appears that they aren't supposed to have a ->store() function. So remove the bogus write permission to get rid of the warning. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: <stable@vger.kernel.org> # 3.[89] [ shorten commit message ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-04-30Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull edac fixes from Mauro Carvalho Chehab: "Two edac fixes: - i7300_edac currently reports a wrong number of DIMMs when the memory controller is in single channel mode - on some Sandy Bridge machines, the EDAC driver bails out as one of the PCI IDs used by the driver is hidden by BIOS. As the driver uses it only to detect the type of memory, make it optional at the driver" * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: edac: sb_edac.c should not require prescence of IMC_DDRIO device i7300_edac: Fix memory detection in single mode
2013-04-29edac: sb_edac.c should not require prescence of IMC_DDRIO deviceLuck, Tony
The Sandy Bridge EDAC driver uses a register in the IMC_DDRIO CSR space to determine the type of DIMMs (registered or unregistered). But this device does not exist on some single socket Sandy Bridge servers. While the type of DIMMs is nice to know, it is not essential for this driver's other functions. So it seems harsh to have it refuse to load at all when it cannot find this device. Make the check for this device be optional. If it isn't present just report the memory type as "MEM_UNKNOWN". Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-29i7300_edac: Fix memory detection in single modeMauro Carvalho Chehab
When the machine is on single mode, only branch 0 channel 0 is valid. However, the code is not honouring it: [ 1952.639341] EDAC DEBUG: i7300_get_mc_regs: Memory controller operating on single mode ... [ 1952.639351] EDAC DEBUG: i7300_init_csrows: AMB-present CH0 = 0x1: [ 1952.639353] EDAC DEBUG: i7300_init_csrows: AMB-present CH1 = 0x0: [ 1952.639355] EDAC DEBUG: i7300_init_csrows: AMB-present CH2 = 0x0: [ 1952.639358] EDAC DEBUG: i7300_init_csrows: AMB-present CH3 = 0x0: ... [ 1952.639360] EDAC DEBUG: decode_mtr: MTR0 CH0: DIMMs are Present (mtr) [ 1952.639362] EDAC DEBUG: decode_mtr: WIDTH: x8 [ 1952.639363] EDAC DEBUG: decode_mtr: ELECTRICAL THROTTLING is enabled [ 1952.639364] EDAC DEBUG: decode_mtr: NUMBANK: 4 bank(s) [ 1952.639366] EDAC DEBUG: decode_mtr: NUMRANK: single [ 1952.639367] EDAC DEBUG: decode_mtr: NUMROW: 16,384 - 14 rows [ 1952.639368] EDAC DEBUG: decode_mtr: NUMCOL: 1,024 - 10 columns [ 1952.639370] EDAC DEBUG: decode_mtr: SIZE: 512 MB [ 1952.639371] EDAC DEBUG: decode_mtr: ECC code is 8-byte-over-32-byte SECDED+ code [ 1952.639373] EDAC DEBUG: decode_mtr: Scrub algorithm for x8 is on enhanced mode [ 1952.639374] EDAC DEBUG: decode_mtr: MTR0 CH1: DIMMs are Present (mtr) [ 1952.639376] EDAC DEBUG: decode_mtr: WIDTH: x8 [ 1952.639377] EDAC DEBUG: decode_mtr: ELECTRICAL THROTTLING is enabled [ 1952.639379] EDAC DEBUG: decode_mtr: NUMBANK: 4 bank(s) [ 1952.639380] EDAC DEBUG: decode_mtr: NUMRANK: single [ 1952.639381] EDAC DEBUG: decode_mtr: NUMROW: 16,384 - 14 rows [ 1952.639383] EDAC DEBUG: decode_mtr: NUMCOL: 1,024 - 10 columns [ 1952.639384] EDAC DEBUG: decode_mtr: SIZE: 512 MB [ 1952.639385] EDAC DEBUG: decode_mtr: ECC code is 8-byte-over-32-byte SECDED+ code [ 1952.639387] EDAC DEBUG: decode_mtr: Scrub algorithm for x8 is on enhanced mode ... [ 1952.639449] EDAC DEBUG: print_dimm_size: channel 0 | channel 1 | channel 2 | channel 3 | [ 1952.639451] EDAC DEBUG: print_dimm_size: ------------------------------------------------------------- [ 1952.639453] EDAC DEBUG: print_dimm_size: csrow/SLOT 0 512 MB | 512 MB | 0 MB | 0 MB | [ 1952.639456] EDAC DEBUG: print_dimm_size: csrow/SLOT 1 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639458] EDAC DEBUG: print_dimm_size: csrow/SLOT 2 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639460] EDAC DEBUG: print_dimm_size: csrow/SLOT 3 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639462] EDAC DEBUG: print_dimm_size: csrow/SLOT 4 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639464] EDAC DEBUG: print_dimm_size: csrow/SLOT 5 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639466] EDAC DEBUG: print_dimm_size: csrow/SLOT 6 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639468] EDAC DEBUG: print_dimm_size: csrow/SLOT 7 0 MB | 0 MB | 0 MB | 0 MB | [ 1952.639470] EDAC DEBUG: print_dimm_size: ------------------------------------------------------------- Instead of detecting a single memory at channel 0, it is showing twice the memory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-19amd64_edac: Add Family 16h supportAravind Gopalakrishnan
Add code to handle DRAM ECC errors decoding for Fam16h. Tested on Fam16h with ECC turned on using the mce_amd_inj facility and works fine. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> [ Boris: cleanups and clarifications ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-25EDAC, mc_sysfs.c: Fix string array pointer typesBorislav Petkov
Those should be const ptr to a const string, fix them. Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-16EDAC: Merge mci.mem_is_per_rank with mci.csbasedMauro Carvalho Chehab
Both mci.mem_is_per_rank and mci.csbased denote the same thing: the memory controller is csrows based. Merge both fields into one. There's no need for the driver to actually fill it, as the core detects it by checking if one of the layers has the csrows type as part of the memory hierarchy: if (layers[i].type == EDAC_MC_LAYER_CHIP_SELECT) per_rank = true; Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-16amd64_edac: Correct DIMM sizesMauro Carvalho Chehab
We were filling the csrow size with a wrong value. 16a528ee3975 ("EDAC: Fix csrow size reported in sysfs") tried to address the issue. It fixed the report with the old API but not with the new one. Correct it for the new API too. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> [ make it a per-csrow accounting regardless of ->channel_count ] Signed-off-by: Borislav Petkov <bp@suse.de>
2013-03-05EDAC: Make sysfs functions staticStephen Hemminger
Fixes lots of sparse warnings here. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Borislav Petkov <bp@suse.de>
2013-02-28Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab: "For: - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac); - error injection support for i5100, when EDAC debug is enabled; - fix edac when it is loaded builtin (early init for the subsystem); - a "Firmware First" EDAC driver, allowing ghes to report errors via EDAC (ghes-edac). With regards to ghes-edac, this fixes a longstanding BZ at Red Hat that happens with Nehalem and Sandy Bridge CPUs: when both GHES and i7core_edac or sb_edac are running, the error reports are unpredictable, as both BIOS and OS race to access the registers. With ghes-edac, the EDAC core will refuse to register any other concurrent memory error driver. This patchset moves the ghes struct definitions to a separate header file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to register/unregister and to report errors via ghes-edac. Those changes were acked by ghes driver maintainer (Huang)." * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits) i5100_edac: convert to use simple_open() ghes_edac: fix to use list_for_each_entry_safe() when delete list items ghes_edac: Fix RAS tracing ghes_edac: Make it compliant with UEFI spec 2.3.1 ghes_edac: Improve driver's printk messages ghes_edac: Don't credit the same memory dimm twice ghes_edac: do a better job of filling EDAC DIMM info ghes_edac: add support for reporting errors via EDAC ghes_edac: Register at EDAC core the BIOS report ghes: add the needed hooks for EDAC error report ghes: move structures/enum to a header file edac: add support for error type "Info" edac: add support for raw error reports edac: reduce stack pressure by using a pre-allocated buffer edac: lock module owner to avoid error report conflicts edac: remove proc_name from mci structure edac: add a new memory layer type edac: initialize the core earlier edac: better report error conditions in debug mode i5100_edac: Remove two checkpatch warnings ...
2013-02-26i5100_edac: convert to use simple_open()Wei Yongjun
This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-26ghes_edac: fix to use list_for_each_entry_safe() when delete list itemsWei Yongjun
Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each_entry() macro aptly named list_for_each_entry_safe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: Fix RAS tracingMauro Carvalho Chehab
With the current version of CPER, there's no way to associate an error with the memory error. So, the error location in EDAC layers is unused. As CPER has its own idea about memory architectural layers, just output whatever is there inside the driver's detail at the RAS tracepoint. The EDAC location keeps untouched, in the case that, in some future, we could actually map the error into the dimm labels. Now, the error message: [ 72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 72.396627] {1}[Hardware Error]: APEI generic hardware error status [ 72.396628] {1}[Hardware Error]: severity: 2, corrected [ 72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected [ 72.396632] {1}[Hardware Error]: flags: 0x01 [ 72.396634] {1}[Hardware Error]: primary [ 72.396635] {1}[Hardware Error]: section_type: memory error [ 72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400 [ 72.396638] {1}[Hardware Error]: node: 3 [ 72.396639] {1}[Hardware Error]: card: 0 [ 72.396640] {1}[Hardware Error]: module: 0 [ 72.396641] {1}[Hardware Error]: device: 0 [ 72.396643] {1}[Hardware Error]: error_type: 18, unknown [ 72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Is properly represented on the trace event: kworker/0:2-584 [000] .... 72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location:-1:-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 sockets E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: Make it compliant with UEFI spec 2.3.1Mauro Carvalho Chehab
The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: Improve driver's printk messagesMauro Carvalho Chehab
Provide a better infrastructure for printk's inside the driver: - use edac_dbg() for debug messages; - standardize the usage of pr_info(); - provide warning about the risk of relying on this driver. While here, changes the size of a fake memory to 1 page. This is as good or as bad as 1000 pages, but it is easier for userspace to detect, as I don't expect that any machine implementing GHES would provide just 1 page available ;) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Conflicts: drivers/edac/ghes_edac.c
2013-02-25ghes_edac: Don't credit the same memory dimm twiceMauro Carvalho Chehab
On my tests on a 4xE5-4650 CPU's system, the GHES EDAC driver is called twice. As the SMBIOS DMI enumeration call will seek for the entire DIMM sockets in the system, on this machine, equipped with 128 GB of RAM, the memory is displayed twice: +-----------------------+ | mc0 | mc1 | ----------+-----------------------+ memory45: | 8192 MB | 8192 MB | memory44: | 0 MB | 0 MB | ----------+-----------------------+ memory43: | 0 MB | 0 MB | memory42: | 8192 MB | 8192 MB | ----------+-----------------------+ memory41: | 0 MB | 0 MB | memory40: | 0 MB | 0 MB | ----------+-----------------------+ memory39: | 8192 MB | 8192 MB | memory38: | 0 MB | 0 MB | ----------+-----------------------+ memory37: | 0 MB | 0 MB | memory36: | 8192 MB | 8192 MB | ----------+-----------------------+ memory35: | 0 MB | 0 MB | memory34: | 0 MB | 0 MB | ----------+-----------------------+ memory33: | 8192 MB | 8192 MB | memory32: | 0 MB | 0 MB | ----------+-----------------------+ memory31: | 0 MB | 0 MB | memory30: | 8192 MB | 8192 MB | ----------+-----------------------+ memory29: | 0 MB | 0 MB | memory28: | 0 MB | 0 MB | ----------+-----------------------+ memory27: | 8192 MB | 8192 MB | memory26: | 0 MB | 0 MB | ----------+-----------------------+ memory25: | 0 MB | 0 MB | memory24: | 8192 MB | 8192 MB | ----------+-----------------------+ memory23: | 0 MB | 0 MB | memory22: | 0 MB | 0 MB | ----------+-----------------------+ memory21: | 8192 MB | 8192 MB | memory20: | 0 MB | 0 MB | ----------+-----------------------+ memory19: | 0 MB | 0 MB | memory18: | 8192 MB | 8192 MB | ----------+-----------------------+ memory17: | 0 MB | 0 MB | memory16: | 0 MB | 0 MB | ----------+-----------------------+ memory15: | 8192 MB | 8192 MB | memory14: | 0 MB | 0 MB | ----------+-----------------------+ memory13: | 0 MB | 0 MB | memory12: | 8192 MB | 8192 MB | ----------+-----------------------+ memory11: | 0 MB | 0 MB | memory10: | 0 MB | 0 MB | ----------+-----------------------+ memory9: | 8192 MB | 8192 MB | memory8: | 0 MB | 0 MB | ----------+-----------------------+ memory7: | 0 MB | 0 MB | memory6: | 8192 MB | 8192 MB | ----------+-----------------------+ memory5: | 0 MB | 0 MB | memory4: | 0 MB | 0 MB | ----------+-----------------------+ memory3: | 8192 MB | 8192 MB | memory2: | 0 MB | 0 MB | ----------+-----------------------+ memory1: | 0 MB | 0 MB | memory0: | 8192 MB | 8192 MB | ----------+-----------------------+ Total sum of 256 GB. As there's no reliable way to credit DIMMS to the right memory controller, just put everything on memory controller 0 (with should always exist). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: do a better job of filling EDAC DIMM infoMauro Carvalho Chehab
Instead of just faking a random value for the DIMM data, get the information that it is available via DMI table. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: add support for reporting errors via EDACMauro Carvalho Chehab
Now that the EDAC core is capable of just forward the errors via the userspace API, add a report mechanism for the GHES errors. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-25ghes_edac: Register at EDAC core the BIOS reportMauro Carvalho Chehab
Register GHES at EDAC MC core, in order to avoid other drivers to also handle errors and mangle with error data. The edac core will warrant that just one driver will be used, so the first one to register (BIOS first) will be the one that will be reporting the hardware errors. For now, the EDAC driver does nothing but to register at the EDAC core, preventing the hardware-driven mechanism to interfere with GHES. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-21edac: add support for raw error reportsMauro Carvalho Chehab
That allows APEI GHES driver to report errors directly, using the EDAC error report API. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: reduce stack pressure by using a pre-allocated bufferMauro Carvalho Chehab
The number of variables at the stack is too big. Reduces the stack usage by using a pre-allocated error buffer. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: lock module owner to avoid error report conflictsMauro Carvalho Chehab
APEI GHES and i7core_edac/sb_edac currently can be loaded at the same time, but those are Highlander modules: "There can be only one". There are two reasons for that: 1) Each driver assumes that it is the only one registering at the EDAC core, as it is driver's responsibility to number the memory controllers, and all of them start from 0; 2) If BIOS is handling the memory errors, the OS can't also be doing it, as one will mangle with the other. So, we need to add an module owner's lock at the EDAC core, in order to avoid having two different modules handling memory errors at the same time. The best way for doing this lock seems to use the driver's name, as this is unique, and won't require changes on every driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-21edac: add a new memory layer typeMauro Carvalho Chehab
There are some cases where the memory controller layout is completely hidden. This is the case of firmware-driven error code, like the one provided by GHES. Add a new layer to be used on such memory error report mechanisms. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>