summaryrefslogtreecommitdiff
path: root/drivers/edac
AgeCommit message (Collapse)Author
2019-11-10EDAC: Introduce an mci_for_each_dimm() iteratorRobert Richter
Introduce an mci_for_each_dimm() iterator. It returns a pointer to a struct dimm_info. This makes the declaration and use of an index obsolete and avoids access to internal data of struct mci (direct array access etc). [ bp: push the struct dimm_info *dimm; declaration into the CONFIG_EDAC_DEBUG block. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-4-rrichter@marvell.com
2019-11-09EDAC: Remove EDAC_DIMM_OFF() macroRobert Richter
The EDAC_DIMM_OFF() macro takes 5 arguments to get the DIMM's index. Simplify this by storing the index in struct dimm_info to avoid its calculation and remove the EDAC_DIMM_OFF() macro. The index can be directly used then. Another advantage is that edac_mc_alloc() could be used even if the exact size of the layers is unknown. Only the number of DIMMs would be needed. Rename iterator variable to idx, while at it. The name is more handy, esp. when searching for it in the code. Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-3-rrichter@marvell.com
2019-11-09EDAC: Replace EDAC_DIMM_PTR() macro with edac_get_dimm() functionRobert Richter
The EDAC_DIMM_PTR() macro takes 3 arguments from struct mem_ctl_info. Clean up this interface to only pass the mci struct and replace this macro with a new function edac_get_dimm(). Also introduce an edac_get_dimm_by_index() function for later use. This allows it to get a DIMM pointer only by a given index. This can be useful if the DIMM's position within the layers of the memory controller or the exact size of the layers are unknown. Small style changes made for some hunks after applying the semantic patch. Semantic patch used: @@ expression mci, a, b,c; @@ -EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, a, b, c) +edac_get_dimm(mci, a, b, c) [ bp: Touchups. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106093239.25517-2-rrichter@marvell.com
2019-11-09EDAC/amd64: Get rid of the ECC disabled long messageBorislav Petkov
This message keeps flooding dmesg on boxes where ECC is disabled or the DIMMs do not support ECC but the module gets auto-probed. What's even worse is that autoprobing happens on every CPU due to the CPU-family matching the driver does and uevent being generated for each CPU device. What is more, this message is becoming even more useless on newer systems where forcing ECC is not recommended and it should be done in the BIOS so the BIOS can do all the necessary work, i.e., just setting a bit in an MSR is not enough anymore. So get rid of it. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/20191106160607.GC28380@zn.tnic
2019-11-08EDAC/ghes: Fix locking and memory barrier issuesRobert Richter
The ghes registration and refcount is broken in several ways: * ghes_edac_register() returns with success for a 2nd instance even if a first instance's registration is still running. This is not correct as the first instance may fail later. A subsequent registration may not finish before the first. Parallel registrations must be avoided. * The refcount was increased even if a registration failed. This leads to stale counters preventing the device from being released. * The ghes refcount may not be decremented properly on unregistration. Always decrement the refcount once ghes_edac_unregister() is called to keep the refcount sane. * The ghes_pvt pointer is handed to the irq handler before registration finished. * The mci structure could be freed while the irq handler is running. Fix this by adding a mutex to ghes_edac_register(). This mutex serializes instances to register and unregister. The refcount is only increased if the registration succeeded. This makes sure the refcount is in a consistent state after registering or unregistering a device. Note: A spinlock cannot be used here as the code section may sleep. The ghes_pvt is protected by ghes_lock now. This ensures the pointer is not updated before registration was finished or while the irq handler is running. It is unset before unregistering the device including necessary (implicit) memory barriers making the changes visible to other CPUs. Thus, the device can not be used anymore by an interrupt. Also, rename ghes_init to ghes_refcount for better readability and switch to refcount API. A refcount is needed because there can be multiple GHES structures being defined (see ACPI 6.3 specification, 18.3.2.7 Generic Hardware Error Source, "Some platforms may describe multiple Generic Hardware Error Source structures with different notification types, ..."). Another approach to use the mci's device refcount (get_device()) and have a release function does not work here. A release function will be called only for device_release() with the last put_device() call. The device must be deleted *before* that with device_del(). This is only possible by maintaining an own refcount. [ bp: touchups. ] Fixes: 0fe5f281f749 ("EDAC, ghes: Model a single, logical memory controller") Fixes: 1e72e673b9d1 ("EDAC/ghes: Fix Use after free in ghes_edac remove path") Co-developed-by: James Morse <james.morse@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Co-developed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191105200732.3053-1-rrichter@marvell.com
2019-11-06EDAC/amd64: Check for memory before fully initializing an instanceYazen Ghannam
Return early before checking for ECC if the node does not have any populated memory. Free any cached hardware data before returning. Also, return 0 in this case since this is not a failure. Other nodes may have memory and the module should attempt to load an instance for them. Move printing of hardware information to after the instance is initialized, so that the information is only printed for nodes with memory. Return an error code when ECC is disabled. This check happens after checking for memory. The module should explicitly fail to load if memory is populated on a node and ECC is disabled. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106012448.243970-6-Yazen.Ghannam@amd.com
2019-11-06EDAC/amd64: Use cached data when checking for ECCYazen Ghannam
...now that the data is available earlier. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106012448.243970-5-Yazen.Ghannam@amd.com
2019-11-06EDAC/amd64: Save max number of controllers to family typeYazen Ghannam
The maximum number of memory controllers is fixed within a family/model group. In most cases, this has been fixed at 2, but some systems may have up to 8. The struct amd64_family_type already contains family/model-specific information, and this can be used rather than adding model checks to various functions. Create a new field in struct amd64_family_type for max_mcs. Set this when setting other family type information, and use this when needing the maximum number of memory controllers possible for a system. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106012448.243970-4-Yazen.Ghannam@amd.com
2019-11-06EDAC/amd64: Gather hardware information earlyYazen Ghannam
Split out gathering hardware information from init_one_instance() into a separate function hw_info_get(). This is necessary so that the information can be cached earlier and used to check if memory is populated and if ECC is enabled on a node. Also, define a function hw_info_put() to back out changes made in hw_info_get(). Check for an allocated PCI device (Function 0 for Family 17h or Function 1 for pre-Family 17h) before freeing, since hw_info_put() may be called before PCI siblings are reserved. Drop the family check when freeing pvt->umc. This will be NULL on pre-Family 17h systems. However, kfree() is safe and will check for a NULL pointer before freeing. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106012448.243970-3-Yazen.Ghannam@amd.com
2019-11-06EDAC/amd64: Make struct amd64_family_type globalYazen Ghannam
The struct amd64_family_type doesn't change between multiple nodes and instances of the module, so make it global. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191106012448.243970-2-Yazen.Ghannam@amd.com
2019-10-25EDAC/amd64: Set grain per DIMMYazen Ghannam
The following commit introduced a warning on error reports without a non-zero grain value. 3724ace582d9 ("EDAC/mc: Fix grain_bits calculation") The amd64_edac_mod module does not provide a value, so the warning will be given on the first reported memory error. Set the grain per DIMM to cacheline size (64 bytes). This is the current recommendation. Fixes: 3724ace582d9 ("EDAC/mc: Fix grain_bits calculation") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20191022203448.13962-7-Yazen.Ghannam@amd.com
2019-10-24EDAC/aspeed: Use devm_platform_ioremap_resource() in aspeed_probe()Markus Elfring
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: James Morse <james.morse@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Stefan Schaeckeler <sschaeck@cisco.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/baabb9e9-a1b2-3a04-9fb6-aa632de5f722@web.de
2019-10-18EDAC, skx: Retrieve and print retry_rd_err_log registersTony Luck
Skylake logs some additional useful information in per-channel registers in addition the the architectural status/addr/misc logged in the machine check bank. Pick up this information and add it to the EDAC log: retry_rd_err_[five 32-bit register values] Sorry, no definitions for these registers. OEMs and DIMM vendors will be able to use them to isolate which cells in the DIMM are causing problems. correrrcnt[per rank corrected error counts] Note that if additional errors are logged while these registers are being read, you may see a jumble of values some from earlier errors, others from later errors (since the registers report the most recent logged error). The correrrcnt registers provide error counts per possible rank. If these counts only change by one since the previous error logged for this channel, then it is safe to assume that the registers logged provide a coherent view of one error. With this change EDAC logs look like this: EDAC MC4: 1 CE memory read error on CPU_SrcID#2_MC#0_Chan#1_DIMM#0 (channel:1 slot:0 page:0x8f26018 offset:0x0 grain:32 syndrome:0x0 - err_code:0x0101:0x0091 socket:2 imc:0 rank:0 bg:0 ba:0 row:0x1f880 col:0x200 retry_rd_err_log[0001a209 00000000 00000001 04800001 0001f880] correrrcnt[0001 0000 0000 0000 0000 0000 0000 0000]) Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-10-18EDAC, skx_common: Refactor so that we initialize "dev" in result of adxl decode.Tony Luck
Simplifies the code a little. Acked-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-10-17Merge branch 'edac-urgent' into edac-for-nextBorislav Petkov
Pick up urgent change into next queue. Signed-off-by: Borislav Petkov <bp@suse.de>
2019-10-17EDAC/ghes: Fix Use after free in ghes_edac remove pathJames Morse
ghes_edac models a single logical memory controller, and uses a global ghes_init variable to ensure only the first ghes_edac_register() will do anything. ghes_edac is registered the first time a GHES entry in the HEST is probed. There may be multiple entries, so subsequent attempts to register ghes_edac are silently ignored as the work has already been done. When a GHES entry is unregistered, it calls ghes_edac_unregister(), which free()s the memory behind the global variables in ghes_edac. But there may be multiple GHES entries, the next call to ghes_edac_unregister() will dereference the free()d memory, and attempt to free it a second time. This may also be triggered on a platform with one GHES entry, if the driver is unbound/re-bound and unbound. The re-bind step will do nothing because of ghes_init, the second unbind will then do the same work as the first. Doing the unregister work on the first call is unsafe, as another CPU may be processing a notification in ghes_edac_report_mem_error(), using the memory we are about to free. ghes_init is already half of the reference counting. We only need to do the register work for the first call, and the unregister work for the last. Add the unregister check. This means we no longer free ghes_edac's memory while there are GHES entries that may receive a notification. This was detected by KASAN and DEBUG_TEST_DRIVER_REMOVE. [ bp: merge into a single patch. ] Fixes: 0fe5f281f749 ("EDAC, ghes: Model a single, logical memory controller") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20191014171919.85044-2-james.morse@arm.com Link: https://lkml.kernel.org/r/304df85b-8b56-b77e-1a11-aa23769f2e7c@huawei.com
2019-10-09EDAC/device: Rework error logging APIHanna Hawa
Make the main workhorse the "count" functions which can log a @count of errors. Have the current APIs edac_device_handle_{ce,ue}() call the _count() variants and this way keep the exported symbols number unchanged. [ bp: Rewrite. ] Signed-off-by: Hanna Hawa <hhhawa@amazon.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: benh@amazon.com Cc: dwmw@amazon.co.uk Cc: hanochu@amazon.com Cc: James Morse <james.morse@arm.com> Cc: jonnyc@amazon.com Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: ronenk@amazon.com Cc: talel@amazon.com Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190923191741.29322-2-hhhawa@amazon.com
2019-09-30EDAC: skx_common: get rid of unused type varMauro Carvalho Chehab
drivers/edac/skx_common.c: In function ‘skx_mce_output_error’: drivers/edac/skx_common.c:478:8: warning: variable ‘type’ set but not used [-Wunused-but-set-variable] 478 | char *type, *optype; | ^~~~ Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-30EDAC: sb_edac: get rid of unused varsMauro Carvalho Chehab
There are several vars unused on this driver, probably because it was a modified copy of another driver. Get rid of them. drivers/edac/sb_edac.c: In function ‘knl_get_dimm_capacity’: drivers/edac/sb_edac.c:1343:16: warning: variable ‘sad_size’ set but not used [-Wunused-but-set-variable] 1343 | u64 sad_base, sad_size, sad_limit = 0; | ^~~~~~~~ drivers/edac/sb_edac.c: In function ‘sbridge_mce_output_error’: drivers/edac/sb_edac.c:2955:8: warning: variable ‘type’ set but not used [-Wunused-but-set-variable] 2955 | char *type, *optype, msg[256]; | ^~~~ drivers/edac/sb_edac.c: In function ‘sbridge_unregister_mci’: drivers/edac/sb_edac.c:3203:22: warning: variable ‘pvt’ set but not used [-Wunused-but-set-variable] 3203 | struct sbridge_pvt *pvt; | ^~~ At top level: drivers/edac/sb_edac.c:266:18: warning: ‘correrrthrsld’ defined but not used [-Wunused-const-variable=] 266 | static const u32 correrrthrsld[] = { | ^~~~~~~~~~~~~ drivers/edac/sb_edac.c:257:18: warning: ‘correrrcnt’ defined but not used [-Wunused-const-variable=] 257 | static const u32 correrrcnt[] = { | ^~~~~~~~~~ Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-30EDAC: i5400_edac: get rid of some unused varsMauro Carvalho Chehab
There are several temporary unused vars: drivers/edac/i5400_edac.c: In function ‘i5400_get_mc_regs’: drivers/edac/i5400_edac.c:1058:6: warning: variable ‘maxdimmperch’ set but not used [-Wunused-but-set-variable] 1058 | int maxdimmperch; | ^~~~~~~~~~~~ drivers/edac/i5400_edac.c:1057:6: warning: variable ‘maxch’ set but not used [-Wunused-but-set-variable] 1057 | int maxch; | ^~~~~ drivers/edac/i5400_edac.c: In function ‘i5400_init_dimms’: drivers/edac/i5400_edac.c:1174:6: warning: variable ‘max_dimms’ set but not used [-Wunused-but-set-variable] 1174 | int max_dimms; | ^~~~~~~~~ drivers/edac/i5400_edac.c:1173:14: warning: variable ‘channel_count’ set but not used [-Wunused-but-set-variable] 1173 | int ndimms, channel_count; | ^~~~~~~~~~~~~ Get rid of them. Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-30EDAC: i5400_edac: print type at debug messageMauro Carvalho Chehab
There are 3 types of non-recoverable errors that the MC reports: - Fatal; - Non-fatal uncorrected - Non-fatal correctable While we don't add it to the log itself, it could be useful to have this at least for debug messages. This shuts up this warning: drivers/edac/i5400_edac.c: In function ‘i5400_proccess_non_recoverable_info’: drivers/edac/i5400_edac.c:524:8: warning: variable ‘type’ set but not used [-Wunused-but-set-variable] 524 | char *type = NULL; | ^~~~ Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-30EDAC: i7300_edac: fix a kernel-doc syntaxMauro Carvalho Chehab
The declaration of the kerneldoc entry is wrong, causing this warning: drivers/edac/i7300_edac.c:824: warning: Function parameter or member 'mir_no' not described in 'decode_mir' Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-30EDAC: i7300_edac: rename a kernel-doc var descriptionMauro Carvalho Chehab
One var was renamed, but the associated kernel-doc markup still points to the old name. Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-30EDAC: i5100_edac: get rid of an unused varMauro Carvalho Chehab
As reported by GCC with W=1: drivers/edac/i5100_edac.c:714:16: warning: variable ‘et’ set but not used [-Wunused-but-set-variable] 714 | unsigned long et; | ^~ It sounds some left over from some code before the addition of an udelay(). Acked-by: Borislav Petkov <bp@alien8.de> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-09-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits) ARM: 8906/1: drivers/amba: add reset control to amba bus probe ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding ARM: 8886/1: l2x0: support parity-enable/disable on aurora ARM: 8885/1: aurora-l2: add defines for parity and ECC registers ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes ARM: 8896/1: VDSO: Don't leak kernel addresses ARM: 8895/1: visit mach-* and plat-* directories when cleaning ARM: 8894/1: boot: Replace open-coded nop with macro ARM: 8893/1: boot: Explain the 8 nops ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE ...
2019-09-16Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu-feature updates from Ingo Molnar: - Rework the Intel model names symbols/macros, which were decades of ad-hoc extensions and added random noise. It's now a coherent, easy to follow nomenclature. - Add new Intel CPU model IDs: - "Tiger Lake" desktop and mobile models - "Elkhart Lake" model ID - and the "Lightning Mountain" variant of Airmont, plus support code - Add the new AVX512_VP2INTERSECT instruction to cpufeatures - Remove Intel MPX user-visible APIs and the self-tests, because the toolchain (gcc) is not supporting it going forward. This is the first, lowest-risk phase of MPX removal. - Remove X86_FEATURE_MFENCE_RDTSC - Various smaller cleanups and fixes * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) x86/cpu: Update init data for new Airmont CPU model x86/cpu: Add new Airmont variant to Intel family x86/cpu: Add Elkhart Lake to Intel family x86/cpu: Add Tiger Lake to Intel family x86: Correct misc typos x86/intel: Add common OPTDIFFs x86/intel: Aggregate microserver naming x86/intel: Aggregate big core graphics naming x86/intel: Aggregate big core mobile naming x86/intel: Aggregate big core client naming x86/cpufeature: Explain the macro duplication x86/ftrace: Remove mcount() declaration x86/PCI: Remove superfluous returns from void functions x86/msr-index: Move AMD MSRs where they belong x86/cpu: Use constant definitions for CPU models lib: Remove redundant ftrace flag removal x86/crash: Remove unnecessary comparison x86/bitops: Use __builtin_constant_p() directly instead of IS_IMMEDIATE() x86: Remove X86_FEATURE_MFENCE_RDTSC x86/mpx: Remove MPX APIs ...
2019-09-07EDAC/amd64: Add PCI device IDs for family 17h, model 70hIsaac Vaughn
Add the new Family 17h Model 70h PCI IDs (device 18h functions 0 and 6) to the AMD64 EDAC module. [ bp: s/f17_base_addr_to_cs_size/f17_addr_mask_to_cs_size/g ] Signed-off-by: Isaac Vaughn <isaac.vaughn@knights.ucf.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: James Morse <james.morse@arm.com> Cc: linux-edac@vger.kernel.org Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Robert Richter <rrichter@marvell.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190906192131.8ced0ca112146f32d82b6cae@knights.ucf.edu
2019-09-04EDAC/mc_sysfs: Make debug messages consistentRobert Richter
Debug messages are inconsistently used in the error handlers. Some lack an error message, some are called regardless of the return status, messages for the same error are at different locations in the code depending on the error code. This happens esp. near put_device() calls. Make those debug messages more consistent. Additionally, unify the error messages to have the same terms for the same operations of the device. Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190902123216.9809-5-rrichter@marvell.com
2019-09-03EDAC/mc_sysfs: Remove pointless gotosRobert Richter
Use direct returns instead of gotos. Error handling code becomes smaller and better readable. Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190902123216.9809-4-rrichter@marvell.com
2019-09-03EDAC: Prefer 'unsigned int' to bare use of 'unsigned'Robert Richter
Use of 'unsigned int' instead of bare use of 'unsigned'. Fix this for edac_mc*, ghes and the i5100 driver as reported by checkpatch.pl. While at it, struct member dev_ch_attribute->channel is always used as unsigned int. Change type to unsigned int to avoid type casts. [ bp: Massage. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190902123216.9809-2-rrichter@marvell.com
2019-08-29ARM: 8891/1: EDAC: armada_xp: Add support for more SoCsChris Packham
The Armada 38x and other integrated SoCs use a reduced pin count so the width of the SDRAM interface is smaller than the Armada XP SoCs. This means that the definition of "full" and "half" width is reduced from 64/32 to 32/16. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-29ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECCJan Luebbe
Add support for the ECC functionality as found in the DDR RAM and L2 cache controllers on the MV78230/MV78x60 SoCs. This driver has been tested on the MV78460 (on a custom board with a DDR3 ECC DIMM). [cp use SPDX license] Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-29ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapperJan Luebbe
We already have wrappers for x8 and x16, so add the missing x32 one. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-28x86/intel: Aggregate microserver namingPeter Zijlstra
Currently big microservers have _XEON_D while small microservers have _X, Make it uniformly: _D. for i in `git grep -l "\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*_\(X\|XEON_D\)"` do sed -i -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*ATOM.*\)_X/\1_D/g' \ -e 's/\(\(INTEL_FAM6_\|VULNWL_INTEL\|INTEL_CPU_FAM6\).*\)_XEON_D/\1_D/g' ${i} done Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Tony Luck <tony.luck@intel.com> Cc: x86@kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/20190827195122.677152989@infradead.org
2019-08-23EDAC/amd64: Support asymmetric dual-rank DIMMsYazen Ghannam
Future AMD systems will support asymmetric dual-rank DIMMs. These are DIMMs where the ranks are of different sizes. The even rank will use the Primary Even Chip Select registers and the odd rank will use the Secondary Odd Chip Select registers. Recognize if a Secondary Odd Chip Select is being used. Use the Secondary Odd Address Mask when calculating the chip select size. [ bp: move csrow_sec_enabled() to the header, fix CS_ODD define and tone-down the capitalized words spelling. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-8-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Cache secondary Chip Select registersYazen Ghannam
AMD Family 17h systems have a set of secondary Chip Select Base Addresses and Address Masks. These do not represent unique Chip Selects, rather they are used in conjunction with the primary Chip Select registers in certain cases. Cache these secondary Chip Select registers for future use. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-7-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Decode syndrome before translating addressYazen Ghannam
AMD Family 17h systems currently require address translation in order to report the system address of a DRAM ECC error. This is currently done before decoding the syndrome information. The syndrome information does not depend on the address translation, so the proper EDAC csrow/channel reporting can function without the address. However, the syndrome information will not be decoded if the address translation fails. Decode the syndrome information before doing the address translation. The syndrome information is architecturally defined in MCA_SYND and can be considered robust. The address translation is system-specific and may fail on newer systems without proper updates to the translation algorithm. Fixes: 713ad54675fd ("EDAC, amd64: Define and register UMC error decode function") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-6-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Find Chip Select memory size using Address MaskYazen Ghannam
Chip Select memory size reporting on AMD Family 17h was recently fixed in order to account for interleaving. However, the current method is not robust. The Chip Select Address Mask can be used to find the memory size. There are a couple of cases. 1) For single-rank and dual-rank non-interleaved, use the address mask plus 1 as the size. 2) For dual-rank interleaved, do #1 but "de-interleave" the address mask first. Always "de-interleave" the address mask in order to simplify the code flow. Bit mask manipulation is necessary to check for interleaving, so just go ahead and do the de-interleaving. In the non-interleaved case, the original and de-interleaved address masks will be the same. To de-interleave the mask, count the number of zero bits in the middle of the mask and swap them with the most significant bits. For example, Original=0xFFFF9FE, De-interleaved=0x3FFFFFE Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-5-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Initialize DIMM info for systems with more than two channelsYazen Ghannam
Currently, the DIMM info for AMD Family 17h systems is initialized in init_csrows(). This function is shared with legacy systems, and it has a limit of two channel support. This prevents initialization of the DIMM info for a number of ranks, so there will be missing ranks in the EDAC sysfs. Create a new init_csrows_df() for Family17h+ and revert init_csrows() back to pre-Family17h support. Loop over all channels in the new function in order to support systems with more than two channels. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-4-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Recognize DRAM device type ECC capabilityYazen Ghannam
AMD Family 17h systems support x4 and x16 DRAM devices. However, the device type is not checked when setting mci.edac_ctl_cap. Set the appropriate capability flag based on the device type. Default to x8 DRAM device when neither the x4 or x16 bits are set. [ bp: reverse cpk_en check to save an indentation level. ] Fixes: 2d09d8f301f5 ("EDAC, amd64: Determine EDAC MC capabilities on Fam17h") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-3-Yazen.Ghannam@amd.com
2019-08-22EDAC/amd64: Support more than two controllers for chip selects handlingYazen Ghannam
The struct chip_select array that's used for saving chip select bases and masks is fixed at length of two. There should be one struct chip_select for each controller, so this array should be increased to support systems that may have more than two controllers. Increase the size of the struct chip_select array to eight, which is the largest number of controllers per die currently supported on AMD systems. Fix number of DIMMs and Chip Select bases/masks on Family17h, because AMD Family 17h systems support 2 DIMMs, 4 CS bases, and 2 CS masks per channel. Also, carve out the Family 17h+ reading of the bases/masks into a separate function. This effectively reverts the original bases/masks reading code to before Family 17h support was added. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-2-Yazen.Ghannam@amd.com
2019-08-14EDAC/mc: Cleanup _edac_mc_free() codeRobert Richter
Remove needless and boilerplate variable declarations. No functional changes. [ bp: Add newlines for better readability. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190624150758.6695-10-rrichter@marvell.com
2019-08-09EDAC, pnd2: Fix ioremap() size in dnv_rd_reg()Stephen Douthit
Depending on how BIOS has marked the reserved region containing the 32KB MCHBAR you can get warnings like: resource sanity check: requesting [mem 0xfed10000-0xfed1ffff], which spans more than reserved [mem 0xfed10000-0xfed17fff] caller dnv_rd_reg+0xc8/0x240 [pnd2_edac] mapping multiple BARs Not all of the mmio regions used in dnv_rd_reg() are the same size. The MCHBAR window is 32KB and the sideband ports are 64KB. Pass the correct size to ioremap() depending on which resource we're reading from. Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-08EDAC, mellanox: Add ECC support for BlueField DDR4Shravan Kumar Ramani
Add ECC support for Mellanox BlueField SoC DDR controller. This requires SMC to the running Arm Trusted Firmware to report what is the current memory configuration. Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Shravan Kumar Ramani <sramani@mellanox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-07EDAC/altera: Use the proper type for the IRQ status bitsDan Carpenter
Smatch complains about the cast of a u32 pointer to unsigned long: drivers/edac/altera_edac.c:1878 altr_edac_a10_irq_handler() warn: passing casted pointer '&irq_status' to 'find_first_bit()' This code wouldn't work on a 64 bit big endian system because it would read past the end of &irq_status. [ bp: massage. ] Fixes: 13ab8448d2c9 ("EDAC, altera: Add ECC Manager IRQ controller support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: James Morse <james.morse@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190624134717.GA1754@mwanda
2019-08-03EDAC/mc: Fix grain_bits calculationRobert Richter
The grain in EDAC is defined as "minimum granularity for an error report, in bytes". The following calculation of the grain_bits in edac_mc is wrong: grain_bits = fls_long(e->grain) + 1; Where grain_bits is defined as: grain = 1 << grain_bits Example: grain = 8 # 64 bit (8 bytes) grain_bits = fls_long(8) + 1 grain_bits = 4 + 1 = 5 grain = 1 << grain_bits grain = 1 << 5 = 32 Replace it with the correct calculation: grain_bits = fls_long(e->grain - 1); The example gives now: grain_bits = fls_long(8 - 1) grain_bits = fls_long(7) grain_bits = 3 grain = 1 << 3 = 8 Also, check if the hardware reports a reasonable grain != 0 and fallback with a warning to 1 byte granularity otherwise. [ bp: massage a bit. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190624150758.6695-2-rrichter@marvell.com
2019-07-25edac: altera: Move Stratix10 SDRAM ECC to peripheralThor Thayer
ARM32 SoCFPGAs had separate IRQs for SDRAM. ARM64 SoCFPGAs send all DBEs to SError so filtering by source is necessary. The Stratix10 SDRAM ECC is a better match with the generic Altera peripheral ECC framework because the linked list can be searched to find the ECC block offset and printout the DBE Address. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: James Morse <james.morse@arm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-27EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msecEiichi Tsukata
Commit 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2") assumes edac_mc_poll_msec to be unsigned long, but the type of the variable still remained as int. Setting edac_mc_poll_msec can trigger out-of-bounds write. Reproducer: # echo 1001 > /sys/module/edac_core/parameters/edac_mc_poll_msec KASAN report: BUG: KASAN: global-out-of-bounds in edac_set_poll_msec+0x140/0x150 Write of size 8 at addr ffffffffb91b2d00 by task bash/1996 CPU: 1 PID: 1996 Comm: bash Not tainted 5.2.0-rc6+ #23 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 Call Trace: dump_stack+0xca/0x13e print_address_description.cold+0x5/0x246 __kasan_report.cold+0x75/0x9a ? edac_set_poll_msec+0x140/0x150 kasan_report+0xe/0x20 edac_set_poll_msec+0x140/0x150 ? dimmdev_location_show+0x30/0x30 ? vfs_lock_file+0xe0/0xe0 ? _raw_spin_lock+0x87/0xe0 param_attr_store+0x1b5/0x310 ? param_array_set+0x4f0/0x4f0 module_attr_store+0x58/0x80 ? module_attr_show+0x80/0x80 sysfs_kf_write+0x13d/0x1a0 kernfs_fop_write+0x2bc/0x460 ? sysfs_kf_bin_read+0x270/0x270 ? kernfs_notify+0x1f0/0x1f0 __vfs_write+0x81/0x100 vfs_write+0x1e1/0x560 ksys_write+0x126/0x250 ? __ia32_sys_read+0xb0/0xb0 ? do_syscall_64+0x1f/0x390 do_syscall_64+0xc1/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fa7caa5e970 Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 04 RSP: 002b:00007fff6acfdfe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa7caa5e970 RDX: 0000000000000005 RSI: 0000000000e95c08 RDI: 0000000000000001 RBP: 0000000000e95c08 R08: 00007fa7cad1e760 R09: 00007fa7cb36a700 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000005 R13: 0000000000000001 R14: 00007fa7cad1d600 R15: 0000000000000005 The buggy address belongs to the variable: edac_mc_poll_msec+0x0/0x40 Memory state around the buggy address: ffffffffb91b2c00: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa ffffffffb91b2c80: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa >ffffffffb91b2d00: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa ^ ffffffffb91b2d80: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 ffffffffb91b2e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fix it by changing the type of edac_mc_poll_msec to unsigned int. The reason why this patch adopts unsigned int rather than unsigned long is msecs_to_jiffies() assumes arg to be unsigned int. We can avoid integer conversion bugs and unsigned int will be large enough for edac_mc_poll_msec. Reviewed-by: James Morse <james.morse@arm.com> Fixes: 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-06-26EDAC, skx, i10nm: Fix source ID register offsetQiuxu Zhuo
The source ID register offset for Skylake server is 0xf0, while for Icelake server is 0xf8. Pass the correct offset to get the source ID. Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-06-26EDAC, i10nm: Check ECC enabling status per channelQiuxu Zhuo
The i10nm_edac only checks the ECC enabling status for the first channel of the memory controller. If there aren't memory DIMMs populated on the first channel, but at least one DIMM populated on the second channel, it will wrongly report that the ECC for the memory controller is disabled that fails to load the i10nm_edac driver. Fix it by checking ECC enabling status per channel. [Tony: Also report which channel has ECC disabled] Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>