summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2019-12-26dmaengine: print more meaningful error messageVinod Koul
error log for dma_channel_table_init() failure pointed a mere "initialization failure", which is not very helpful message, so print additional details like function name and error code. Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: move module_/dma_device_put() after route freeVinod Koul
We call dma_device_put() and module_put() after invoking .device_free_chan_resources callback, but we should also take care of router devices and invoke this after .route_free callback. So move it after .route_free Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: ioat: Support in-use unbindLogan Gunthorpe
Don't allocate memory using the devm infrastructure and instead call kfree with the new dmaengine device_release call back. This ensures the structures are available until the last reference is dropped. We also need to ensure we call ioat_shutdown() in ioat_remove() so that all the channels are quiesced and further transaction fails. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20191216190120.21374-6-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Add reference counting to dma_device structLogan Gunthorpe
Adding a reference count helps drivers to properly implement the unbind while in use case. References are taken and put every time a channel is allocated or freed. Once the final reference is put, the device is removed from the dma_device_list and a release callback function is called to signal the driver to free the memory. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-5-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Move dma_channel_rebalance() infrastructure up in codeLogan Gunthorpe
So it can be called by a release function which is needed higher up in the code. No functional changes intended. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-4-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Call module_put() after device_free_chan_resources()Logan Gunthorpe
The module reference is taken to ensure the callbacks still exist when they are called. If the channel holds the last reference to the module, the module can disappear before device_free_chan_resources() is called and would cause a call into free'd memory. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-3-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Store module owner in dma_device structLogan Gunthorpe
dma_chan_to_owner() dereferences the driver from the struct device to obtain the owner and call module_[get|put](). However, if the backing device is unbound before the dma_device is unregistered, the driver will be cleared and this will cause a NULL pointer dereference. Instead, store a pointer to the owner module in the dma_device struct so the module reference can be properly put when the channel is put, even if the backing device was destroyed first. This change helps to support a safer unbind of DMA engines. If the dma_device is unregistered in the driver's remove function, there's no guarantee that there are no existing clients and a users action may trigger the WARN_ONCE in dma_async_device_unregister() which is unlikely to leave the system in a consistent state. Instead, a better approach is to allow the backing driver to go away and fail any subsequent requests to it. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-2-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-23dmaengine: virt-dma: Fix access after free in vchan_complete()Peter Ujfalusi
vchan_vdesc_fini() is freeing up 'vd' so the access to vd->tx_result is via already freed up memory. Move the vchan_vdesc_fini() after invoking the callback to avoid this. Fixes: 09d5b702b0f97 ("dmaengine: virt-dma: store result on dma descriptor") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191220131100.21804-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-23dmaengine: k3dma: Avoid null pointer traversalJohn Stultz
In some cases we seem to submit two transactions in a row, which causes us to lose track of the first. If we then cancel the request, we may still get an interrupt, which traverses a null ds_run value. So try to avoid starting a new transaction if the ds_run value is set. While this patch avoids the null pointer crash, I've had some reports of the k3dma driver still getting confused, which suggests the ds_run/ds_done value handling still isn't quite right. However, I've not run into an issue recently with it so I think this patch is worth pushing upstream to avoid the crash. Signed-off-by: John Stultz <john.stultz@linaro.org> [add ss tag] Link: https://lore.kernel.org/r/20191218190906.6641-1-john.stultz@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-23dmaengine: JZ4780: Add support for the X1830.周琰杰 (Zhou Yanjie)
Add support for probing the dma-jz4780 driver on the X1830 Soc. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1576591140-125668-4-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-18dmaengine: fsl-edma: Add eDMA support for QorIQ LS1028A platformPeng Ma
Our platforms(such as LS1021A, LS1012A, LS1043A, LS1046A, LS1028A) with below registers(CHCFG0 - CHCFG15) of eDMA as follows: *-----------------------------------------------------------* | Offset | OTHERS | LS1028A | |--------------|--------------------|-----------------------| | 0x0 | CHCFG0 | CHCFG3 | |--------------|--------------------|-----------------------| | 0x1 | CHCFG1 | CHCFG2 | |--------------|--------------------|-----------------------| | 0x2 | CHCFG2 | CHCFG1 | |--------------|--------------------|-----------------------| | 0x3 | CHCFG3 | CHCFG0 | |--------------|--------------------|-----------------------| | ... | ...... | ...... | |--------------|--------------------|-----------------------| | 0xC | CHCFG12 | CHCFG15 | |--------------|--------------------|-----------------------| | 0xD | CHCFG13 | CHCFG14 | |--------------|--------------------|-----------------------| | 0xE | CHCFG14 | CHCFG13 | |--------------|--------------------|-----------------------| | 0xF | CHCFG15 | CHCFG12 | *-----------------------------------------------------------* This patch is to improve edma driver to fit LS1028A platform. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/20191212033714.4090-1-peng.ma@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-18dmaengine: ti: edma: Fix error return code in edma_probe()Wei Yongjun
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 2a03c1314506 ("dmaengine: ti: edma: add missed operations") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191212114622.127322-1-weiyongjun1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-17dmaengine: ti: omap-dma: Add device tree match data and use it for cpu_pmTony Lindgren
With old DMA code disabled for handling DMA requests for device tree based SoCs, we can move omap3 specific context save and restore to the dmaengine driver. Let's do this by adding cpu_pm notifier handling to save and restore context, and enable it based on device tree match data. This way we can use the match data later to configure more SoC specific features later on too. Note that we only clear the channels in use while the platform code also clears reserved channels 0 and 1 on high-security SoCs. Based on testing on n900, this is not needed though and the system idles just fine. With the dmaengine driver handling context save and restore, we must now remove the old custom calls for context save and restore. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-11dmaengine: dma-jz4780: Also break descriptor chains on JZ4725BPaul Cercueil
It turns out that the JZ4725B displays the same buggy behaviour as the JZ4740 that was described in commit f4c255f1a747 ("dmaengine: dma-jz4780: Break descriptor chains on JZ4740"). Work around it by using the same workaround previously used for the JZ4740. Fixes commit f4c255f1a747 ("dmaengine: dma-jz4780: Break descriptor chains on JZ4740") Cc: <stable@vger.kernel.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20191210165545.59690-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-11dmaengine: axi-dmac: add a check for devm_regmap_init_mmioChuhong Yuan
The driver misses checking the result of devm_regmap_init_mmio(). Add a check to fix it. Fixes: fc15be39a827 ("dmaengine: axi-dmac: add regmap support") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191209085711.16001-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-10dmaengine: pl330: Convert to the *_late and *_early system sleep callbacksUlf Hansson
It has turned out that it's in general a good idea for dmaengines to allow DMA requests during the entire dpm_suspend() phase. Therefore, convert the pl330 driver into using SET_LATE_SYSTEM_SLEEP_PM_OPS. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20191205143746.24873-3-ulf.hansson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-10dmaengine: pl330: Drop boilerplate code for suspend/resumeUlf Hansson
Let's drop the boilerplate code in the system suspend/resume callbacks and convert to use pm_runtime_force_suspend|resume(). This change also has a nice side effect, as pm_runtime_force_resume() may decide to leave the device in low power state, when that is feasible, thus avoiding to waste both time and energy during system resume. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20191205143746.24873-2-ulf.hansson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-10dmaengine: ti: edma: add missed operationsChuhong Yuan
The driver forgets to call pm_runtime_disable and pm_runtime_put_sync in probe failure and remove. Add the calls and modify probe failure handling to fix it. To simplify the fix, the patch adjusts the calling order and merges checks for devm_kcalloc. Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191124052855.6472-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1574306348-29212-1-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: sf-pdma: move macro to header fileGreen Wan
The place where the macro, SF_PDMA_REG_BASE(), is cause kernel-doc using wrong function declaration. Move it to header file. Signed-off-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191118143554.16129-2-green.wan@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: sf-pdma: replace /** with /* for non-function commentGreen Wan
There are several comments starting from "/**" but not for function comment purpose. It causes kernel-doc parsing wrong string. Replace "/**" with "/*" to fix them. Signed-off-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191118143554.16129-1-green.wan@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: ti: edma: fix missed failure handlingChuhong Yuan
When devm_kcalloc fails, it forgets to call edma_free_slot. Replace direct return with failure handler to fix it. Fixes: 1be5336bc7ba ("dmaengine: edma: New device tree binding") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191118073802.28424-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: mmp_pdma: add missed of_dma_controller_freeChuhong Yuan
The driver calls of_dma_controller_register in probe but does not free it in remove. Add the call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191115083153.12334-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: mmp_tdma: add missed of_dma_controller_freeChuhong Yuan
The driver calls of_dma_controller_register in probe but does not free it in remove. Add the call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191115083100.12220-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: sprd: Add wrap address support for link-list modeEric Long
The Spreadtrum Audio compress offload mode will use 2-stage DMA transfer to save power. That means we can request 2 dma channels, one for source channel, and another one for destination channel. Once the source channel's transaction is done, it will trigger the destination channel's transaction automatically by hardware signal. In this case, the source channel will transfer data from IRAM buffer to the DSP fifo to decoding/encoding, once IRAM buffer is empty by transferring done, the destination channel will start to transfer data from DDR buffer to IRAM buffer. Since the destination channel will use link-list mode to fill the IRAM data, and IRAM buffer is allocated by 32K, and DDR buffer is larger to 2M, that means we need lots of link-list nodes to do a cyclic transfer, instead wasting lots of link-list memory, we can use wrap address support to reduce link-list node number, which means when the transfer address reaches the wrap address, the transfer address will jump to the wrap_to address specified by wrap_to register, and only 2 link-list nodes can do a cyclic transfer to transfer data from DDR to IRAM. Thus this patch adds wrap address to support this case. [Baolin Wang changes the commit message] Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/85a5484bc1f3dd53ce6f92700ad8b35f30a0b096.1571812029.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14Merge branch 'fixes' into nextVinod Koul
2019-11-14dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00Green Wan
Add PDMA driver, sf-pdma, to enable DMA engine on HiFive Unleashed Rev A00 board. - Implement dmaengine APIs, support MEM_TO_MEM async copy. - Tested by DMA Test client - Supports 4 channels DMA, each channel has 1 done and 1 err interrupt connected to platform-level interrupt controller (PLIC). - Depends on DMA_ENGINE and DMA_VIRTUAL_CHANNELS The datasheet is here: https://static.dev.sifive.com/FU540-C000-v1.0.pdf Follow the DMAengine controller doc, "./Documentation/driver-api/dmaengine/provider.rst" to implement DMA engine. And use the dma test client in doc, "./Documentation/driver-api/dmaengine/dmatest.rst", to test. Each DMA channel has separate HW regs and support done and error ISRs. 4 channels share 1 done and 1 err ISRs. There's no expander/arbitrator in DMA HW. ------ ------ | |--< done 23 >--|ch 0| | |--< err 24 >--| | (dma0chan0) | | ------ | | ------ | |--< done 25 >--|ch 1| | |--< err 26 >--| | (dma0chan1) |PLIC| ------ | | ------ | |--< done 27 >--|ch 2| | |--< err 28 >--| | (dma0chan2) | | ------ | | ------ | |--< done 29 >--|ch 3| | |--< err 30 >--| | (dma0chan3) ------ ------ Signed-off-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191107084955.7580-4-green.wan@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: zx: remove: removed dmam_pool_destroySatendra Singh Thakur
In the probe method dmam_pool_create is used. Therefore, there is no need to explicitly call dmam_pool_destroy in remove method as this will be automatically taken care by devres Signed-off-by: Satendra Singh Thakur <sst2005@gmail.com> Link: https://lore.kernel.org/r/20191109113609.6159-1-sst2005@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq ↵Satendra Singh Thakur
fails When devm_request_irq fails, currently, the function dma_async_device_unregister gets called. This doesn't free the resources allocated by of_dma_controller_register. Therefore, we have called of_dma_controller_free for this purpose. Signed-off-by: Satendra Singh Thakur <sst2005@gmail.com> Link: https://lore.kernel.org/r/20191109113523.6067-1-sst2005@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: iop-adma: clean up an indentation issueColin Ian King
There is a statement that is indented too deeply, remove the extraneous indentation. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191112191143.282814-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-08dmaengine: milbeaut-xdmac: remove redundant error logVinod Koul
platform_get_irq() prints the error message, so caller need not do so, remove the error line in this driver for platform_get_irq() Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191106163128.1980714-2-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-08dmaengine: milbeaut-hdmac: remove redundant error logVinod Koul
platform_get_irq() prints the error message, so caller need not do so, remove the error line in this driver for platform_get_irq() Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191106163128.1980714-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-08dmaengine: dma-jz4780: add missed clk_disable_unprepare in removeChuhong Yuan
The remove misses to disable and unprepare jzdma->clk. Add a call to clk_disable_unprepare to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20191104161622.11758-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-06dmaengine: JZ4780: Add support for the X1000.Zhou Yanjie
Add support for probing the dma-jz4780 driver on the X1000 Soc. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/1571937670-30828-3-git-send-email-zhouyanjie@zoho.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-06dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver supportRadhey Shyam Pandey
Add support for AXI Multichannel Direct Memory Access (AXI MCDMA) core, which is a soft Xilinx IP core that provides high-bandwidth direct memory access between memory and AXI4-Stream target peripherals. The AXI MCDMA core provides scatter-gather interface with multiple independent transmit and receive channels. The driver supports device_prep_slave_sg slave transfer mode. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571763622-29281-7-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-06dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handleRadhey Shyam Pandey
Extend dma_config structure to store irq routine handle. It enables runtime handler selection based on xdma_ip_type and serves as preparatory patch for adding MCDMA IP support. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Suggested-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/1571763622-29281-6-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-06dmaengine: xilinx_dma: Remove axidma multichannel mode supportRadhey Shyam Pandey
The AXI DMA multichannel support is deprecated in the IP and it is no longer actively supported. For multichannel support, refer to the AXI multichannel direct memory access IP product guide(PG228) and MCDMA driver. So inline with it remove axidma multichannel support from from the driver. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571763622-29281-5-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-05dmaengine: ti: edma: Add support for handling reserved channelsPeter Ujfalusi
Like paRAM slots, channels could be used by other cores and in this case we need to make sure that the driver do not alter these channels. Handle the generic dma-channel-mask property to mark channels in a bitmap which can not be used by Linux and convert the legacy rsv_chans if it is provided by platform_data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191025073056.25450-4-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-02dmaengine: fsl-dpaa2-qdma: Remove unnecessary local variables in ↵Nathan Chancellor
DPDMAI_CMD_CREATE macro Clang warns: drivers/dma/fsl-dpaa2-qdma/dpdmai.c:148:25: warning: variable 'cfg' is uninitialized when used within its own initialization [-Wuninitialized] DPDMAI_CMD_CREATE(cmd, cfg); ~~~~~~~~~~~~~~~~~~~~~~~^~~~ drivers/dma/fsl-dpaa2-qdma/dpdmai.c:42:24: note: expanded from macro 'DPDMAI_CMD_CREATE' typeof(_cfg) (cfg) = (_cfg); \ ~~~ ^~~~ 1 warning generated. Looking at the preprocessed source, we can see that this is true. int dpdmai_create(struct fsl_mc_io *mc_io, u32 cmd_flags, const struct dpdmai_cfg *cfg, u16 *token) { struct fsl_mc_command cmd = { 0 }; int err; cmd.header = mc_encode_cmd_header((((0x90E) << 4) | 0), cmd_flags, 0); do { typeof(cmd)(cmd) = (cmd); typeof(cfg)(cfg) = (cfg); ((cmd).params[0] |= mc_enc((8), (8), (cfg)->priorities[0])); ((cmd).params[0] |= mc_enc((16), (8), (cfg)->priorities[1])); } while (0); I cannot see a good reason to create another version of cfg when the parameter one will work perfectly fine and cmd can just be used as is. Remove them to fix this warning. Fixes: f2835adf8afb ("dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA Interface) support") Link: https://github.com/ClangBuiltLinux/linux/issues/746 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20191022171648.37732-1-natechancellor@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-02dmaengine: fsl-qdma: Handle invalid qdma-queue0 IRQKrzysztof Kozlowski
platform_get_irq_byname() might return -errno which later would be cast to an unsigned int and used in IRQ handling code leading to usage of wrong ID and errors about wrong irq_base. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Peng Ma <peng.ma@nxp.com> Tested-by: Peng Ma <peng.ma@nxp.com> Link: https://lore.kernel.org/r/20191004150826.6656-1-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idleTony Lindgren
Yegor Yefremov <yegorslists@googlemail.com> reported that musb and ftdi uart can fail for the first open of the uart unless connected using a hub. This is because the first dma call done by musb_ep_program() must wait if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues with other non-dma packets before the DMA transfer is started causing at least ftdi uarts to fail to receive data. Let's fix the issue by waking up cppi41 with PM runtime calls added to cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we have musb_ep_program() continue with PIO until cppi41 is awake. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Reported-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v4.9+ Link: https://lore.kernel.org/r/20191023153138.23442-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23dmaengine: fsl-dpaa2-qdma: export the symbolsPeng Ma
The symbols were not exported leading to error: WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/fsl-dpaa2-qdma/dpdmai.o see include/linux/module.h for more information GZIP arch/arm64/boot/Image.gz ERROR: "dpdmai_enable" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_set_rx_queue" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_get_tx_queue" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_get_rx_queue" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_get_attributes" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_open" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_close" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_disable" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_reset" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL make[2]: *** [__modpost] Error 1 make[1]: *** [modules] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [sub-make] Error 2 So export it. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reported-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20191023045617.22764-1-peng.ma@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Clear desc_pendingcount in xilinx_dma_resetNicholas Graumann
Whenever we reset the channel, we need to clear desc_pendingcount along with desc_submitcount. Otherwise when a new transaction is submitted, the irq coalesce level could be programmed to an incorrect value in the axidma case. This behavior can be observed when terminating pending transactions with xilinx_dma_terminate_all() and then submitting new transactions without releasing and requesting the channel. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-8-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Print debug message when no free tx segmentsNicholas Graumann
The driver should not run out of tx segments in normal operation. But, if the user attempts to prepare a transaction with a large sg list, the driver may not have enough free segments to accommodate the request. Log a message at the debug level to inform the user in case they are experiencing issues. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-7-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Add callback_result supportNicholas Graumann
Take advantage of dmaengine_desc_get_callback_invoke which allows either a callback or callback_result to be specified. This can be useful when using the AXI DMA transfer unknown quantities of data where the residue contained in the result can be used to calculate the number of bytes transferred. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-6-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Introduce xilinx_dma_get_residueNicholas Graumann
Introduce a function that can calculate residues for IPs that support it: AXI DMA and CDMA. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-5-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Remove residue from channel dataRadhey Shyam Pandey
There is no use of storing channel data residue field. So clean it up. In tx_status simply pass calculated residue to dma_set_residue. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-4-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Merge get_callback and _invokeNicholas Graumann
The dma api provides a single interface to get the appropriate callback and invoke it directly. Prefer using it. Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-3-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-20dmaengine: xilinx_dma: Remove desc_callback_valid checkRadhey Shyam Pandey
In descriptor cleanup the call to desc_callback_valid can be safely removed as both callback pointers i.e callback_result and callback are anyway checked in invoke(). There is no much benefit in having redundant checks. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com> Reviewed-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-2-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-18dmaengine: milbeaut-xdmac: Add XDMAC driver for Milbeaut platformsJassi Brar
Driver for Socionext Milbeaut XDMAC controller. The controller only supports Mem-To-Mem transfers over upto 8 configurable channels. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20191015033219.14713-1-jassisinghbrar@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 09:25:28 +0000