summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2013-03-30dw_dmac: adjust slave_id accordingly to request line baseAndy Shevchenko
On some hardware configurations we have got the request line with the offset. The patch introduces convert_slave_id() helper for that cases. The request line base is came from the driver data provided by the platform_device_id table. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-30dmaengine: dw_dma: fix endianess for DT xlate functionArnd Bergmann
As reported by Wu Fengguang's build robot tracking sparse warnings, the dma_spec arguments in the dw_dma_xlate are already byte swapped on little-endian platforms and must not get swapped again. This code is currently not used anywhere, but will be used in Linux 3.10 when the ARM SPEAr platform starts using the generic DMA DT binding. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-03-03Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull second set of slave-dmaengine updates from Vinod Koul: "Arnd's patch moves the dw_dmac to use generic DMA binding. I agreed to merge this late as it will avoid the conflicts between trees. The second patch from Matt adding a dma_request_slave_channel_compat API was supposed to be picked up, but somehow never got picked up. Some patches dependent on this are already in -next :(" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw_dmac: move to generic DMA binding dmaengine: add dma_request_slave_channel_compat()
2013-02-28dmaengine: dw_dmac: move to generic DMA bindingArnd Bergmann
The original device tree binding for this driver, from Viresh Kumar unfortunately conflicted with the generic DMA binding, and did not allow to completely seperate slave device configuration from the controller. This is an attempt to replace it with an implementation of the generic binding, but it is currently completely untested, because I do not have any hardware with this particular controller. The patch applies on top of the slave-dma tree, which contains both the base support for the generic DMA binding, as well as the earlier attempt from Viresh. Both of these are currently not merged upstream however. This version incorporates feedback from Viresh Kumar, Andy Shevchenko and Russell King. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-27dmaengine: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "This is fairly big pull by my standards as I had missed last merge window. So we have the support for device tree for slave-dmaengine, large updates to dw_dmac driver from Andy for reusing on different architectures. Along with this we have fixes on bunch of the drivers" Fix up trivial conflicts, usually due to #include line movement next to each other. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits) Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" ARM: dts: pl330: Add #dma-cells for generic dma binding support DMA: PL330: Register the DMA controller with the generic DMA helpers DMA: PL330: Add xlate function DMA: PL330: Add new pl330 filter for DT case. dma: tegra20-apb-dma: remove unnecessary assignment edma: do not waste memory for dma_mask dma: coh901318: set residue only if dma is in progress dma: coh901318: avoid unbalanced locking dmaengine.h: remove redundant else keyword dma: of-dma: protect list write operation by spin_lock dmaengine: ste_dma40: do not remove descriptors for cyclic transfers dma: of-dma.c: fix memory leakage dw_dmac: apply default dma_mask if needed dmaengine: ioat - fix spare sparse complain dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING dw_dmac: add support for Lynxpoint DMA controllers dw_dmac: return proper residue value dw_dmac: fill individual length of descriptor ...
2013-02-23Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "So from the depth of frozen Minnesota, here's the powerpc pull request for 3.9. It has a few interesting highlights, in addition to the usual bunch of bug fixes, minor updates, embedded device tree updates and new boards: - Hand tuned asm implementation of SHA1 (by Paulus & Michael Ellerman) - Support for Doorbell interrupts on Power8 (kind of fast thread-thread IPIs) by Ian Munsie - Long overdue cleanup of the way we handle relocation of our open firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard - Support for saving/restoring & context switching the PPR (Processor Priority Register) on server processors that support it. This allows the kernel to preserve thread priorities established by userspace. By Haren Myneni. - DAWR (new watchpoint facility) support on Power8 by Michael Neuling - Ability to change the DSCR (Data Stream Control Register) which controls cache prefetching on a running process via ptrace by Alexey Kardashevskiy - Support for context switching the TAR register on Power8 (new branch target register meant to be used by some new specific userspace perf event interrupt facility which is yet to be enabled) by Ian Munsie. - Improve preservation of the CFAR register (which captures the origin of a branch) on various exception conditions by Paulus. - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where it belongs by Philippe De Muyter - Support for Transactional Memory on Power8 by Michael Neuling (based on original work by Matt Evans). For those curious about the feature, the patch contains a pretty good description." (See commit db8ff907027b: "powerpc: Documentation for transactional memory on powerpc" for the mentioned description added to the file Documentation/powerpc/transactional_memory.txt) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits) powerpc/kexec: Disable hard IRQ before kexec powerpc/85xx: l2sram - Add compatible string for BSC9131 platform powerpc/85xx: bsc9131 - Correct typo in SDHC device node powerpc/e500/qemu-e500: enable coreint powerpc/mpic: allow coreint to be determined by MPIC version powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct powerpc/85xx: Board support for ppa8548 powerpc/fsl: remove extraneous DIU platform functions arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test powerpc: Documentation for transactional memory on powerpc powerpc: Add transactional memory to pseries and ppc64 defconfigs powerpc: Add config option for transactional memory powerpc: Add transactional memory to POWER8 cpu features powerpc: Add new transactional memory state to the signal context powerpc: Hook in new transactional memory code powerpc: Routines for FP/VSX/VMX unavailable during a transaction powerpc: Add transactional memory unavaliable execption handler powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes powerpc: Add FP/VSX and VMX register load functions for transactional memory powerpc: Add helper functions for transactional memory context switching ...
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-21Merge tag 'multiplatform' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform support from Arnd Bergmann: "Converting more ARM platforms to multiplatform support. This time, OMAP gets converted, which is a major step since this is by far the largest platform in terms of code size. The same thing happens to the vt8500 platform." * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: net: cwdavinci_cpdma: export symbols for cpsw remoteproc: omap: depend on OMAP_MBOX_FWK [media] davinci: do not include mach/hardware.h ARM: OMAP2+: Make sure files with omap initcalls include soc.h ARM: OMAP2+: Include soc.h to drm.c to fix compiling ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall ARM: multi_v7_defconfig: add ARCH_ZYNQ ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB arm: vt8500: Remove remaining mach includes arm: vt8500: Convert debug-macro.S to be multiplatform friendly arm: vt8500: Remove single platform Kconfig options ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S ARM: OMAP2+: Add minimal support for booting vexpress ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support ARM: OMAP2+: Disable code that currently does not work with multiplaform ARM: OMAP2+: Add multiplatform debug_ll support ARM: OMAP: Fix dmaengine init for multiplatform ARM: OMAP: Fix i2c cmdline initcall for multiplatform ARM: OMAP2+: Use omap initcalls ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
2013-02-21Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC driver specific changes from Arnd Bergmann: - Updates to the ux500 cpufreq code - Moving the u300 DMA controller driver to drivers/dma - Moving versatile express drivers out of arch/arm for sharing with arch/arm64 - Device tree bindings for the OMAP General Purpose Memory Controller * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: OMAP2+: gpmc: Add device tree documentation for elm handle ARM: OMAP2+: gpmc: add DT bindings for OneNAND ARM: OMAP2+: gpmc-onenand: drop __init annotation mtd: omap-onenand: pass device_node in platform data ARM: OMAP2+: Prevent potential crash if GPMC probe fails ARM: OMAP2+: gpmc: Remove unneeded of_node_put() arm: Move sp810.h to include/linux/amba/ ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs ARM: OMAP: gpmc-nand: drop __init annotation mtd: omap-nand: pass device_node in platform data ARM: OMAP: gpmc: don't create devices from initcall on DT dma: coh901318: cut down on platform data abstraction dma: coh901318: merge header files dma: coh901318: push definitions into driver dma: coh901318: push header down into the DMA subsystem dma: coh901318: skip hard-coded addresses dma: coh901318: remove hardcoded target addresses dma: coh901318: push platform data into driver dma: coh901318: create a proper platform data file ...
2013-02-20Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt
<< Please pull mpc5xxx patches for v3.9. The bestcomm driver is moved to drivers/dma (so it will be usable for ColdFire). mpc5121 now provides common dtsi file and existing mpc5121 device trees use it. There are some minor clock init and sparse fixes and updates for various 5200 device tree files from Grant. Some fixes for bugs in the mpc5121 DIU driver are also included here (Andrew Morton suggested to push them via my mpc5xxx tree). >>
2013-02-15Merge branch 'omap/multiplatform-fixes', tag 'v3.8-rc5' into next/multiplatformArnd Bergmann
The omap multiplatform support uncovered a bug in the cwdavinci_cpdma code and was missing two drivers that are enabled now but are not quite ready for multiplatform, as found by allyesconfig builds. There is also a conflict generated by automated merge in arch/arm/mach-omap2/drm.c between a bug fix that went into v3.8-rc5 and a different version of the same fix that went into the omap/multiplatform branch. This merge removes the extraneous #include that was causing build errors. * omap/multiplatform-fixes: net: cwdavinci_cpdma: export symbols for cpsw remoteproc: omap: depend on OMAP_MBOX_FWK [media] davinci: do not include mach/hardware.h Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-14DMA: PL330: Register the DMA controller with the generic DMA helpersPadmavathi Venna
This patch registers the pl330 dma controller driver with the generic device tree dma helper functions. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14DMA: PL330: Add xlate functionPadmavathi Venna
Add xlate to translate the device-tree binding information into the appropriate format. The filter function requires the dma controller device and dma channel number as filter_params. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14DMA: PL330: Add new pl330 filter for DT case.Padmavathi Venna
This patch adds a new pl330_dt_filter for DT case to filter the required channel based on the new filter params and modifies the old filter only for non-DT case as suggested by Arnd Bergmann. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: tegra20-apb-dma: remove unnecessary assignmentAndy Shevchenko
There is no need to assign 0 to residue, because dma_cookie_status() does this for us. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14edma: do not waste memory for dma_maskAndy Shevchenko
Accordingly to commentary in the platform_device_register_full the memory allocated for dma_mask will not going to be freed. That's why is better to assign dma_mask afterwards. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: coh901318: set residue only if dma is in progressAndy Shevchenko
When status is DMA_SUCCESS the residue should be zero. Otherwise it's a bug. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: coh901318: avoid unbalanced lockingAndy Shevchenko
In case the len is 0 we must return without trying to unlock the lock that was not locked. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: of-dma: protect list write operation by spin_lockAndy Shevchenko
It's possible to have an inconsistency in the list due to unprotected operation on it. The patch adds a proper locking on the list operation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dmaengine: ste_dma40: do not remove descriptors for cyclic transfersFabio Baltieri
Fix dma_tc_handle() to call d40_desc_remove() and d40_desc_done() only for non-cyclic transfers, as this was breaking ux500_pcm since introduced in: d49278e dmaengine: dma40: Add support to split up large elements Reported-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: of-dma.c: fix memory leakageCong Ding
The memory allocated to ofdma might be a leakage when error occurs. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dw_dmac: apply default dma_mask if neededAndy Shevchenko
In some cases we got the device without dma_mask configured. We have to apply the default value to avoid crashes during memory mapping. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-13dmaengine: ioat - fix spare sparse complainFengguang Wu
>> drivers/dma/ioat/dma_v3.c:371:6: sparse: symbol 'ioat3_timer_event' was not declared. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-13dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.cVinod Koul
as requested by Rob Suggested-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-12ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDINGDave Jiang
There is a race that can hit during __cleanup() when the ioat->head pointer is incremented during descriptor submission. The __cleanup() can clear the PENDING flag when it does not see any active descriptors. This causes new submitted descriptors to be ignored because the COMPLETION_PENDING flag is cleared. This was introduced when code was adapted from ioatdma v1 to ioatdma v2. For v2 and v3, IOAT_COMPLETION_PENDING flag will be abandoned and a new flag IOAT_CHAN_ACTIVE will be utilized. This flag will also be protected under the prep_lock when being modified in order to avoid the race. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-12dw_dmac: add support for Lynxpoint DMA controllersMika Westerberg
Intel Lynxpoint PCH Low Power Subsystem has DMA controller to support general purpose serial buses like SPI, I2C, and HSUART. This controller is enumerated from ACPI namespace with ACPI ID INTL9C60. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-05Merge tag 'tegra-for-3.9-soc-ccf' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc From Stephen Warren: ARM: tegra: Common Clock Framework rework Tegra already supports the common clock framework, but had issues: 1) The clock driver was located in arch/arm/mach-tegra/ rather than drivers/clk/. 2) A single "Tegra clock" type was implemented, rather than separate clock types for PLL, mux, divider, ... type in HW. 3) Clock lookups by device drivers were still driven by device name and connection ID, rather than through device tree. This pull request solves all three issues. This required some DT changes to add clocks properties, and driver changes to request clocks more "correctly". Finally, this rework allows all AUXDATA to be removed from Tegra board files, and various duplicate clock lookup entries to be removed from the driver. This pull request is based on the previous pull request, with tag tegra-for-3.9-cleanup. * tag 'tegra-for-3.9-soc-ccf' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (31 commits) clk: tegra30: remove unused TEGRA_CLK_DUPLICATE()s clk: tegra20: remove unused TEGRA_CLK_DUPLICATE()s ARM: tegra30: remove auxdata ARM: tegra20: remove auxdata ASoC: tegra: remove auxdata staging: nvec: remove use of clk_get_sys ARM: tegra: paz00: add clock information to DT ARM: tegra: add clock properties to Tegra30 DT ARM: tegra: add clock properties to Tegra20 DT spi: tegra: do not use clock name to get clock ARM: tegra: remove legacy clock code ARM: tegra: migrate to new clock code clk: tegra: add clock support for Tegra30 clk: tegra: add clock support for Tegra20 clk: tegra: add Tegra specific clocks ARM: tegra: define Tegra30 CAR binding ARM: tegra: define Tegra20 CAR binding ARM: tegra: move tegra_cpu_car.h to linux/clk/tegra.h ARM: tegra: add function to read chipid ARM: tegra: fix compile error when disable CPU_IDLE ... Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-tegra/common.c arch/arm/mach-tegra/platsmp.c drivers/clocksource/Makefile
2013-01-30Merge tag 'vexpress/drivers-for-3.9' of ↵Olof Johansson
git://git.linaro.org/people/pawelmoll/linux into next/drivers From Pawel Moll: Versatile Express related driver updates for 3.9: * Move sp810 header to a more generic location, mainly to share it with arm64 * tag 'vexpress/drivers-for-3.9' of git://git.linaro.org/people/pawelmoll/linux: arm: Move sp810.h to include/linux/amba/ + Linux 3.8-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-28Merge tag 'coh901318-for-arm-soc' of ↵Olof Johansson
http://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers This pushes the platform data for the U300 COH901318 DMA controller down into the driver and cleans up in the <mach/*> namespace for the U300 platform. * tag 'coh901318-for-arm-soc' of http://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: dma: coh901318: cut down on platform data abstraction dma: coh901318: merge header files dma: coh901318: push definitions into driver dma: coh901318: push header down into the DMA subsystem dma: coh901318: skip hard-coded addresses dma: coh901318: remove hardcoded target addresses dma: coh901318: push platform data into driver dma: coh901318: create a proper platform data file Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-u300/core.c
2013-01-28ARM: tegra: migrate to new clock codePrashant Gaikwad
Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-28dw_dmac: return proper residue valueAndy Shevchenko
Currently the driver returns full length of the active descriptor which is wrong. We have to go throught the active descriptor and substract the length of each sent children in the chain from the total length along with the actual data in the DMA channel registers. The cyclic case is not handled by this patch due to len field in the descriptor structure is left untouched by the original code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28dw_dmac: fill individual length of descriptorAndy Shevchenko
It will be useful to have the length of the transfer in the descriptor. The cyclic transfer functions remained untouched. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28dw_dmac: introduce total_len field in struct dw_descAndy Shevchenko
By this new field we distinguish a total length of the chain and the individual length of each descriptor in the chain. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28dw_dmac: remove unnecessary tx_list field in dw_dma_chanAndy Shevchenko
The soft LLP mode is working for active descriptor only. So, we do not need to have a copy of its pointer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28dw_dmac: print out DW_PARAMS and DWC_PARAMS when debugAndy Shevchenko
It's usefull to have the values of the DW_PARAMS and DWC_PARAMS printed when debug mode is enabled. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28DMAEngine: sirf: lock the shared registers access in sirfsoc_dma_terminate_allBarry Song
Just like Russell pointed out in "DMAEngine: sirf: add DMA pause/resume support" at http://www.spinics.net/lists/arm-kernel/msg212496.html here I find sirfsoc_dma_terminate_all() has same problem, so move the locking to the front of registers access. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28DMAEngine: sirf: add DMA pause/resume supportBarry Song
pause/resume are important for users like ALSA sound drivers, this patches make the sirf prima2/marco support DMA commands DMA_PAUSE and DMA_RESUME. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-25Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman
This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25dma: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine fixes from Vinod Koul: "A few fixes on slave dmanengine. There are trivial fixes in imx-dma, tegra-dma & ioat driver" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: implement flags parameters for cyclic transfer dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers. ioat: Fix DMA memory sync direction correct flag
2013-01-21Merge tag 'ux500-dma40' of //git.linaro.org/people/fabiobaltieri/linux.gitVinod Koul
Pull ste_dma40 fixes from Fabio Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dw_dmac: move soft LLP code from tasklet to dwc_scan_descriptorsAndy Shevchenko
The proper place for the main logic of the soft LLP mode is dwc_scan_descriptors. It prevents to get the transfer unexpectedly aborted in case the user calls dwc_tx_status. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dw_dmac: don't exceed AHB master number in dwc_get_data_widthAndy Shevchenko
The driver assumes that hardware has two AHB masters which might not be always true. In such cases we must not exceed number of the AHB masters present in the hardware. In the proposed scheme in this patch, we would choose the master with highest possible number whenever we exceed max AHB masters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dw_dmac: allocate dma descriptors from DMA_COHERENT memoryAndy Shevchenko
Currently descriptors are allocated from normal cacheable memory and that slows down filling the descriptors, as we need to call cache_coherency routines afterwards. It would be better to allocate memory for these descriptors from DMA_COHERENT memory. This would make code much cleaner too. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dma: sh/shdma-base.c: remove unnecessary null pointer checkCong Ding
the variable chan is dereferenced in line 635, so it is no reason to check null again in line 641. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dma: remove unnecessary null pointer check in mmp_pdma.cCong Ding
the pointer cfg is dereferenced in line 594, so it's no reason to check null again in line 620. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dma: edma: fix slave config dependency on directionMatt Porter
The edma_slave_config() implementation depends on the direction field such that it will not properly configure a slave channel when called without direction set. This fixes the implementation so that the slave config is copied as is and prep_slave_sg() handles the direction dependent handling. spi-omap2-mcspi and omap_hsmmc both expose this bug as they configure the slave channel config from a common path with an unconfigured direction field. Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-14dmaengine: set_dma40: balance clock in probe fail codeFabio Baltieri
Clock code was changed to use clk_prepare_enable in: b707c65 dma/ste_dma40: Fixup clock usage during probe but clk_disable on probe fail path was not updated. This patch fix this by using clk_disable_unprepare in place of clk_disable. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: set_dma40: ignore spurious interruptsFabio Baltieri
Some DMA channels may be used by other cores in the SoC. This patch modifies the dma interrupt handler to ignore interrupts from unknown channels. Cc: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 22:54:42 +0000