summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2013-12-16dma: pl330: Alloc dma_parms for the dma deviceLars-Peter Clausen
In order to be able to set a maximum segment size for the device we need to allocate a dma_parameters struct for the device first. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-13dmaengine: fix sleep in atomicDan Williams
BUG: sleeping function called from invalid context at mm/mempool.c:203 in_atomic(): 1, irqs_disabled(): 0, pid: 43502, name: linbug no locks held by linbug/43502. CPU: 7 PID: 43502 Comm: linbug Not tainted 3.13.0-rc1+ #15 Hardware name: 0000000000000010 ffff88005ebd1878 ffffffff8172d512 ffff8801752bc1c0 ffff8801752bc1c0 ffff88005ebd1898 ffffffff8109d1f6 ffff88005f9a3c58 ffff880177f0f080 ffff88005ebd1918 ffffffff81161f43 ffff88005ebd18f8 Call Trace: [<ffffffff8172d512>] dump_stack+0x4e/0x68 [<ffffffff8109d1f6>] __might_sleep+0xe6/0x120 [<ffffffff81161f43>] mempool_alloc+0x93/0x170 [<ffffffff810c0c34>] ? mark_held_locks+0x74/0x140 [<ffffffff8118a826>] ? follow_page_mask+0x556/0x600 [<ffffffff814107ae>] dmaengine_get_unmap_data+0x2e/0x60 [<ffffffff81410f11>] dma_async_memcpy_pg_to_pg+0x41/0x1c0 [<ffffffff814110e0>] dma_async_memcpy_buf_to_pg+0x50/0x60 [<ffffffff81411bdc>] dma_memcpy_to_iovec+0xfc/0x190 [<ffffffff816163af>] dma_skb_copy_datagram_iovec+0x6f/0x2b0 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dmaengine: mv_xor: fix oops when channels fail to initialiseRussell King
When a channel fails to initialise, we error out and clean up any previously unregistered channels by walking the entire xordev->channels array. Unfortunately, there are paths which end up storing an error pointer in this array, which we then try and dereference in the cleanup code, which causes an oops. Fix this by avoiding writing invalid pointers to this array in the first place. Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dma: mv_xor: Use dmaengine_unmap_data for the self-testsEzequiel Garcia
The driver-specific unmap code was removed in: commit 54f8d501e842879143e867e70996574a54d1e130 Author: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Date: Fri Oct 18 19:35:32 2013 +0200 dmaengine: remove DMA unmap from drivers which had the side-effect of not unmapping the self-test mappings. Fix this by using dmaengine_unmap_data in the self-test routines. In addition, since dmaengine_unmap() assumes that all mappings were created with dma_map_page, this commit changes the single mapping to a page mapping to avoid an incorrect unmapping of the memcpy self-test. The allocation could be changed to be alloc_page(), but sticking to kmalloc results in a less intrusive patch. The size of the test buffer is increased, since dma_map_page() seem to fail when the source and destination pages are the same page. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dmaengine: fix enable for high order unmap poolsDan Williams
The higher order mempools support raid operations, and we want to disable them when raid support is not enabled. Making them conditional on ASYNC_TX_DMA is not sufficient as other users (specifically dmatest) will also issue raid operations. Make raid drivers explicitly request that the core carry the higher order pools. Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dma: fix build warnings in txx9Dan Williams
The unmap rework missed this: drivers/dma/txx9dmac.c:409:25: warning: unused variable 'ds' [-Wunused-variable] Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dmatest: fix build warning on mipsDan Williams
drivers/dma/dmatest.c:543:11: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast [enabled by default] mips expects virt_to_phys() to take a pointer. Fix up the types accordingly. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dma: fix fsldma build warningsDan Williams
drivers/dma/fsldma.c: In function 'fsldma_cleanup_descriptor': drivers/dma/fsldma.c:860:6: warning: unused variable 'len' [-Wunused-variable] drivers/dma/fsldma.c:859:13: warning: unused variable 'dst' [-Wunused-variable] drivers/dma/fsldma.c:858:13: warning: unused variable 'src' [-Wunused-variable] drivers/dma/fsldma.c:857:17: warning: unused variable 'dev' [-Wunused-variable] - due to unmap changes drivers/dma/fsldma.c: In function 'fsl_dma_tx_submit': drivers/dma/fsldma.c:428:2: warning: 'cookie' may be used uninitialized in this function [-Wuninitialized] - long standing warning Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dma: fix build warnings in ppc4xxDan Williams
drivers/dma/ppc4xx/adma.c:1507:6: warning: unused variable 'i' [-Wunused-variable] - due to unmap reworks drivers/dma/ppc4xx/adma.c:3900:2: warning: format '%s' expects a matching 'char *' argument [-Wformat] - due to memset removal drivers/dma/ppc4xx/adma.c:538:13: warning: 'ppc440spe_desc_init_memset' defined but not used [-Wunused-function] - due to memset removal Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dmaengine: at_hdmac: remove unused functionOlof Johansson
commit 54f8d501e8428 ('dmaengine: remove DMA unmap from drivers') refactored some code which resulted in an unused function in the at_hdmac driver: drivers/dma/at_hdmac_regs.h:350:23: warning: 'chan2parent' defined but not used [-Wunused-function] Fixes: 54f8d501e8428 ('dmaengine: remove DMA unmap from drivers') Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Vinod Koul <vinod.koul@Intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dma: mv_xor: remove mv_desc_get_dest_addr()Jason Cooper
The following commit: 54f8d501e842 dmaengine: remove DMA unmap from drivers removed the last caller to mv_desc_get_dest_addr(), creating the warning: drivers/dma/mv_xor.c:57:12: warning: mv_desc_get_dest_addr defined but not used [-Wunused-function] Remove it. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-11ARM: mmp: build sram driver aloneQiao Zhou
sram driver can be used by many chips besides CPU_MMP2, and so build it alone. Also need to select MMP_SRAM for MMP_TDMA driver. Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-11dma: tegra: register as an OF DMA controllerStephen Warren
Call of_dma_controller_register() so that DMA clients can look up the Tegra DMA controller using standard APIs. This requires the of_xlate() function to save off the DMA slave ID, and for tegra_dma_slave_config() not to over-write this information; once DMA client drivers are converted to dma_request_slave_channel() and DT-based lookups, they won't set this field of struct dma_slave_config anymore. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11dma: tegra: use reset frameworkStephen Warren
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com>
2013-12-11Merge branch 'for-3.14/deps-from-dma-of' into for-3.14/dmas-resets-reworkStephen Warren
This merges git://git.infradead.org/users/vkoul/slave-dma.git topic/of
2013-12-10dma: add dma_get_any_slave_channel(), for use in of_xlate()Stephen Warren
mmp_pdma.c implements a custom of_xlate() function that is 95% identical to what Tegra will need. Create a function to implement the common part, so everyone doesn't just cut/paste the implementation. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: dmaengine@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-10dma: add channel request API that supports deferred probeStephen Warren
dma_request_slave_channel() simply returns NULL whenever DMA channel lookup fails. Lookup could fail for two distinct reasons: a) No DMA specification exists for the channel name. This includes situations where no DMA specifications exist at all, or other general lookup problems. b) A DMA specification does exist, yet the driver for that channel is not yet registered. Case (b) should trigger deferred probe in client drivers. However, since they have no way to differentiate the two situations, it cannot. Implement new function dma_request_slave_channel_reason(), which performs identically to dma_request_slave_channel(), except that it returns an error-pointer rather than NULL, which allows callers to detect when deferred probe should occur. Eventually, all drivers should be converted to this new API, the old API removed, and the new API renamed to the more desirable name. This patch doesn't convert the existing API and all drivers in one go, since some drivers call dma_request_slave_channel() then dma_request_channel() if that fails. That would require either modifying dma_request_channel() in the same way, or adding extra error-handling code to all affected drivers, and there are close to 100 drivers using the other API, rather than just the 15-20 or so that use dma_request_slave_channel(), which might be tenable in a single patch. acpi_dma_request_slave_chan_by_name() doesn't currently implement deferred probe. It should, but this will be addressed later. Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-04dma: fix build breakage in s3c24xx-dmaDan Williams
This driver missed the dma unmap conversion. Replace s3c24xx_dma_unmap_buffers with dma_descriptor_unmap. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-04Fix pl08x warningsRussell King - ARM Linux
drivers/dma/amba-pl08x.c: In function 'pl08x_desc_free': drivers/dma/amba-pl08x.c:1173:2: warning: passing argument 1 of 'dma_descriptor_unmap' from incompatible pointer type include/linux/dmaengine.h:476:91: note: expected 'struct dma_async_tx_descriptor *' but argument is of type 'struct pl08x_txd *' Fixes: d38a8c622a1b ("dmaengine: prepare for generic 'unmap' data") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-28rcar-hpbdma: initialise plane information when haltedKuninori Morimoto
Plane information should be initialized when halted. It may restart from the wrong plane without this patch. Reviewed-by: Max Filippov <max.filippov@cogentembedded.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-28rcar-hpbdma: fixup channel busy check for double planeKuninori Morimoto
The device busy check method is different between single and double planes. It will always return "busy" without this patch if channel used as double plane. Reviewed-by: Max Filippov <max.filippov@cogentembedded.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-28rcar-hpbdma: add max transfer sizeKuninori Morimoto
shdma_chan_probe() can set max transfer size, but it will be PAGE_SIZE with out this patch. Reviewed-by: Max Filippov <max.filippov@cogentembedded.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-28dma: mmp_pdma: add missing platform_set_drvdata() in mmp_pdma_probe()Wei Yongjun
Add missing platform_set_drvdata() in mmp_pdma_probe(), otherwise calling platform_get_drvdata() in mmp_pdma_remove() returns NULL. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-28dmaengine: s3c24xx-dma: use DMA_COMPLETE for dma completion statusSachin Kamat
Use the recently introduced DMA_COMPLETE instead of DMA_SUCCESS. Without this patch we get the following build error: drivers/dma/s3c24xx-dma.c: In function ‘s3c24xx_dma_tx_status’: drivers/dma/s3c24xx-dma.c:798:13: error: ‘DMA_SUCCESS’ undeclared (first use in this function) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-26dma: ste_dma40: Parse flags property for new 'high priority channel' requestLee Jones
This is used for MSP (audio) devices which is about to be fully DT:ed. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-20Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-16Merge commit 'dmaengine-3.13-v2' of ↵Vinod Koul
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine changes from Dan 1/ Bartlomiej and Dan finalized a rework of the dma address unmap implementation. 2/ In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus for their review. 3/ Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. 4/ Some minor fixes / cleanups to mv_xor and ioatdma. Conflicts: drivers/dma/dmatest.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
2013-11-14dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registersEzequiel Garcia
Despite requesting two memory resources, called 'base' and 'high_base', the driver uses explicitly only the former. The latter is being used implicitly by addressing at offset +0x200, which in practice accesses high_base. In other words, the current driver breaks if the second memory resource is ever place at an offset different from +0x200. This patch fixes the above by defining the registers with the offset from high_base, and use high_base explicitly where appropriate. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dma: mv_xor: Remove unneeded NULL address checkEzequiel Garcia
This mmio address is checked at probe-time, which makes this test redundant. Let's just remove it. Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14ioat: fix ioat3_irq_reinitDan Williams
The implementation of ioat3_irq_reinit has two bugs: 1/ The mode is incorrectly set to MSIX for the MSI case 2/ The 'dev_id' parameter to free_irq is the ioatdma_device not the channel in the msi and intx case Include a small cleanup to clarify that ioat3_irq_reinit is only for bwd hardware Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14ioat: kill msix_single_vector supportDan Williams
Once we have determined that we will not have all of our desired msix vectors there is no point in attempting a single msix allocation. The driver will already need to read registers to determine the source of the interrupt the fact that it is msix is moot. Fallback directly to msi. Reported-by: Alexander Gordeev <agordeev@redhat.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14ioatdma: clean up sed pool kmem_cacheDan Williams
Use a single cache for all sed allocations. No need to make it per channel. This also avoids the slub_debug warnings for multiple caches with the same name. Switching to dmam_pool_create() to fix leaking the dma pools on initialization failure and lets us kill ioat3_dma_remove(). Cc: Dave Jiang <dave.jiang@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14ioatdma: fix selection of 16 vs 8 source pathDan Williams
When performing continuations there are implied sources that need to be added to the source count. Quoting dma_set_maxpq: /* dma_maxpq - reduce maxpq in the face of continued operations * @dma - dma device with PQ capability * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set * * When an engine does not support native continuation we need 3 extra * source slots to reuse P and Q with the following coefficients: * 1/ {00} * P : remove P from Q', but use it as a source for P' * 2/ {01} * Q : use Q to continue Q' calculation * 3/ {00} * Q : subtract Q from P' to cancel (2) * * In the case where P is disabled we only need 1 extra source: * 1/ {01} * Q : use Q to continue Q' calculation */ ...fix the selection of the 16 source path to take these implied sources into account. Note this also kills the BUG_ON(src_cnt < 9) check in __ioat3_prep_pq16_lock(). Besides not accounting for implied sources the check is redundant given we already made the path selection. Cc: <stable@vger.kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14ioatdma: fix sed pool selectionDan Williams
The array to lookup the sed pool based on the number of sources (pq16_idx_to_sedi) is 16 entries and expects a max source index. However, we pass the total source count which runs off the end of the array when src_cnt == 16. The minimal fix is to just pass src_cnt-1, but given we know the source count is > 8 we can just calculate the sed pool by (src_cnt - 2) >> 3. Cc: Dave Jiang <dave.jiang@intel.com> Cc: <stable@vger.kernel.org> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14ioatdma: Fix bug in selftest after removal of DMA_MEMSET.Dave Jiang
Commit 48a9db4 (3.11) removed the memset op in the xor selftest for ioatdma. The issue is that with the removal of that op, it never replaced the memset with a CPU memset. The memory being operated on is expected to be zeroes but was not. This is causing the xor selftest to fail. Cc: <stable@vger.kernel.org> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: verbose modeDan Williams
Verbose mode turns on test success messages, by default we only output test summaries and failure results. Also cleaned up some stray quotes, leftover from putting the result message format string all on one line. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: convert to dmaengine_unmap_dataDan Williams
Remove the open coded unmap and add coverage for this core functionality to dmatest. Also fixes up a couple places where we leaked dma mappings. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: add a 'wait' parameterDan Williams
Allows for scripting test runs by module load / unload. Prevent module load from returning until 'iterations' (finite) tests have completed, or cause reads of the 'wait' parameter in sysfs to pause until the tests are done. Also killed the local waitqueue since we can just let the thread exit naturally as long as we hold a reference. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: add basic performance metricsDan Williams
Add iops and throughput to the summary output. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: add support for skipping verification and random data setupDan Williams
Towards enabling dmatest to checkout performance add a 'noverify' mode. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: use pseudo random numbersDan Williams
There is no need for dmatest to drain the entropy pool. It would be nice to one day have repeatable runs, but would need a larger rework to synchronize and order calls to the rng across test threads. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: support xor-only, or pq-only channels in testsDan Williams
Currently we only test raid channels that happen to also have 'copy' capability. Search for capable channels that do not have DMA_MEMCPY. Note the return value from run_threaded_test never really made sense because it could return errors after successfully starting tests. We already have the test results per channel so missing channels can be detected at that time. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: restore ability to start test at module load and initDan Williams
1/ move 'run' control to a module parameter so we can do: modprobe dmatest run=1. With this moved the rest of the debugfs boilerplate can go. 2/ Fix parameter initialization. Previously the test was being started without taking the parameters into account in the built-in case. Also killed off the '__' version of some routines. The new rule is just hold the lock when calling a *threaded_test() routine. Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: cleanup redundant "dmatest: " prefixesDan Williams
...now that we have a common pr_fmt. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmatest: replace stored results mechanism, with uniform messagesDan Williams
For long running tests the tracking results in a memory leak for the "ok" results, and for the failures the kernel log should be sufficient. Provide a uniform format for error messages so they can be easily parsed and remove the debugfs file. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14Revert "dmatest: append verify result to results"Dan Williams
This reverts commit d86b2f298e6de124984f5d5817ed1e6e759b3ada. The kernel log buffer is sufficient for collecting test results. The current logging OOMs the machine on long running tests, and usually only the first error is relevant. It is better to stop on error and parse the kernel output. If output volume becomes an issue we can always investigate using trace messages. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmaengine: remove DMA unmap flagsBartlomiej Zolnierkiewicz
Remove no longer needed DMA unmap flags: - DMA_COMPL_SKIP_SRC_UNMAP - DMA_COMPL_SKIP_DEST_UNMAP - DMA_COMPL_SRC_UNMAP_SINGLE - DMA_COMPL_DEST_UNMAP_SINGLE Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jon Mason <jon.mason@intel.com> Acked-by: Mark Brown <broonie@linaro.org> [djbw: clean up straggling skip unmap flags in ntb] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14dmaengine: remove DMA unmap from driversBartlomiej Zolnierkiewicz
Remove support for DMA unmapping from drivers as it is no longer needed (DMA core code is now handling it). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [djbw: fix up chan2parent() unused warning in drivers/dma/dw/core.c] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-14async_pq: convert to dmaengine_unmap_dataDan Williams
Use the generic unmap object to unmap dma buffers. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [bzolnier: keep temporary dma_dest array in do_async_gen_syndrome()] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 10:45:28 +0000