| Age | Commit message (Collapse) | Author |
|---|
|
Pull IDA updates from Matthew Wilcox:
"A better IDA API:
id = ida_alloc(ida, GFP_xxx);
ida_free(ida, id);
rather than the cumbersome ida_simple_get(), ida_simple_remove().
The new IDA API is similar to ida_simple_get() but better named. The
internal restructuring of the IDA code removes the bitmap
preallocation nonsense.
I hope the net -200 lines of code is convincing"
* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
ida: Change ida_get_new_above to return the id
ida: Remove old API
test_ida: check_ida_destroy and check_ida_alloc
test_ida: Convert check_ida_conv to new API
test_ida: Move ida_check_max
test_ida: Move ida_check_leaf
idr-test: Convert ida_check_nomem to new API
ida: Start new test_ida module
target/iscsi: Allocate session IDs from an IDA
iscsi target: fix session creation failure handling
drm/vmwgfx: Convert to new IDA API
dmaengine: Convert to new IDA API
ppc: Convert vas ID allocation to new IDA API
media: Convert entity ID allocation to new IDA API
ppc: Convert mmu context allocation to new IDA API
Convert net_namespace to new IDA API
cb710: Convert to new IDA API
rsxx: Convert to new IDA API
osd: Convert to new IDA API
sd: Convert to new IDA API
...
|
|
Simpler and shorter code.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Pull DMAengine updates from Vinod Koul:
"This round brings couple of framework changes, a new driver and usual
driver updates:
- new managed helper for dmaengine framework registration
- split dmaengine pause capability to pause and resume and allow
drivers to report that individually
- update dma_request_chan_by_mask() to handle deferred probing
- move imx-sdma to use virt-dma
- new driver for Actions Semi Owl family S900 controller
- minor updates to intel, renesas, mv_xor, pl330 etc"
* tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
dmaengine: Add Actions Semi Owl family S900 DMA driver
dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs
dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
dmaengine: mic_x100_dma: use the new helper to simplify the code
dmaengine: add a new helper dmaenginem_async_device_register
dmaengine: imx-sdma: add memcpy interface
dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
dmaengine: dma_request_chan_by_mask() to handle deferred probing
dmaengine: pl330: fix irq race with terminate_all
dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST"
dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
dmaengine: mv_xor_v2: enable COMPILE_TEST
dmaengine: mv_xor_v2: move unmap to before callback
dmaengine: mv_xor_v2: convert callback to helper function
dmaengine: mv_xor_v2: kill the tasklets upon exit
dmaengine: mv_xor_v2: explicitly freeup irq
dmaengine: sh: rcar-dmac: Add dma_pause operation
dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
dmaengine: idma64: Support dmaengine_terminate_sync()
dmaengine: hsu: Support dmaengine_terminate_sync()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the bit set of char/misc drivers for 4.19-rc1
There is a lot here, much more than normal, seems like everyone is
writing new driver subsystems these days... Anyway, major things here
are:
- new FSI driver subsystem, yet-another-powerpc low-level hardware
bus
- gnss, finally an in-kernel GPS subsystem to try to tame all of the
crazy out-of-tree drivers that have been floating around for years,
combined with some really hacky userspace implementations. This is
only for GNSS receivers, but you have to start somewhere, and this
is great to see.
Other than that, there are new slimbus drivers, new coresight drivers,
new fpga drivers, and loads of DT bindings for all of these and
existing drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
android: binder: Rate-limit debug and userspace triggered err msgs
fsi: sbefifo: Bump max command length
fsi: scom: Fix NULL dereference
misc: mic: SCIF Fix scif_get_new_port() error handling
misc: cxl: changed asterisk position
genwqe: card_base: Use true and false for boolean values
misc: eeprom: assignment outside the if statement
uio: potential double frees if __uio_register_device() fails
eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
misc: ti-st: Fix memory leak in the error path of probe()
android: binder: Show extra_buffers_size in trace
firmware: vpd: Fix section enabled flag on vpd_section_destroy
platform: goldfish: Retire pdev_bus
goldfish: Use dedicated macros instead of manual bit shifting
goldfish: Add missing includes to goldfish.h
mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
dt-bindings: mux: add adi,adgs1408
Drivers: hv: vmbus: Cleanup synic memory free path
Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add Actions Semi Owl family S900 DMA driver.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
rcar_dmac_chan_get_residue() should not stop the DMAC, because
the commit 538603c6026c ("dmaengine: sh: rcar-dmac: avoid to write
CHCR.TE to 1 if TCR is set to 0") had fixed unexpected re-transferring
issue. But it had caused the next issue which might stop the cyclic
mode transferring. Thus, for example R-Car sound might be stopped
suddenly.
According to the commit 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB
instead of TCR for residue"), the purpose of clearing CHCR.DE bit is
flushing buffered data to calculate the exact residue.
Such the "exact" residue had been required by sh-sci driver. sh-sci
driver is calling dmaengine_pause() to stop transferring, and get
"exact" residue. Otherwise, it might receive extra data during
getting residue without pausing.
In rx_timer_fn() of sh-sci driver:
dmaengine_tx_status(); /* For checking roughly */
dmaengine_pause();
dmaengine_tx_status(); /* For getting residue */
dmaengine_terminate_all();
But, unfortunately the rcar-dmac driver didn't support dmaengine_pause()
at that time. So, the sh-sci driver cannot get the "exact" residue
without stopping the transferring, because rcar-dmac is buffering data
inside.
Because of these backgrounds, rcar-dmac had been cleared/set CHCR.DE
bit in rcar_dmac_chan_get_residue() to synchronizing data and getting
"exact" residue.
However, rcar-dmac driver has rcar_dmac_chan_pause() now, and clearing
CHCR.DE bit in rcar_dmac_chan_get_residue() doesn't need anymore.
So, this patch removes the rcar_dmac_sync_tcr().
Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use dmaenginem_async_device_register() to simplify the code:
remove the mic_dma_unregister_dma_device()
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This patch adds the dmaenginem_async_device_register for DMA code.
Use the Devres to call the release for the DMA engine driver.
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add MEMCPY capability for imx-sdma driver.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add macro SDMA_BD_MAX_CNT to replace '0xffff'.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If there are no DMA devices registered yet, return with EPROBE_DEFER
similarly to the case when requesting a slave channel.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In pl330_update() when checking if a channel has been aborted, the
channel's lock is not taken, only the overall pl330_dmac lock. But in
pl330_terminate_all() the aborted flag (req_running==-1) is set under
the channel lock and not the pl330_dmac lock.
With threaded interrupts, this leads to a potential race:
pl330_terminate_all pl330_update
------------------- ------------
lock channel
entry
lock pl330
_stop channel
unlock pl330
lock pl330
check req_running != -1
req_running = -1
_start channel
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This reverts commit 31d5e6b72439: ("dmaengine: mv_xor_v2: enable
COMPILE_TEST") as enabling causing bunch of build failures.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
address
>> drivers/dma/mv_xor_v2.c:647:36: sparse: constant 0xFFFF00000000 is so big it is long
include/linux/device.h:678:13: sparse: undefined identifier '__builtin_mul_overflow'
include/linux/device.h:678:13: sparse: call with no type!
Use lower_32_bits and upper_32_bits to set the hw_desq address, instead of
using constant.
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
To get more coverage, enable COMPILE_TEST for this driver.
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Completion callback should happen after dma_descriptor_unmap() has
happened. This allow the cache invalidate to happen and ensure that
the data accessed by the upper layer is in memory that was from DMA
rather than stale data. On some architecture this is done by the
hardware, however we should make the code consistent to not cause
confusion.
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This is in preparation of moving to a callback that provides results to the
callback for the transaction. The conversion will maintain current behavior
and the driver must convert to new callback mechanism at a later time in
order to receive results.
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The mv_xor_v2 driver uses a tasklet, initialized during the probe()
routine. However, it forgets to cleanup the tasklet using
tasklet_kill() function during the remove() routine, which this patch
fixes. This prevents the tasklet from potentially running after the
module has been removed.
Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver")
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We want the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds dma_pause operation. This patch is based on
Muhammad Hamza Farooq's patch.
After this patch applied, an issue that the sh-sci driver with
high baud rate might cause data lost disappeared because the DMAC
is possible to transmit between [1] and [2] below, and then
the residue of [1] is not true:
In rx_timer_fn() of the sh-sci.c:
dmaengine_pause();
...
dmaengine_tx_status(); /* [1] */
...
dmaengine_terminate_all(); /* [2] */
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This patch adds a new function rcar_dmac_clear_chcr_de() to simplify
adding pause function later.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It appears that the driver misses the support of dmaengine_terminate_sync().
Since many of callers expects this behaviour implement the new
device_synchronize() callback to allow proper synchronization when stopping
a channel.
Fixes: b36f09c3c441 ("dmaengine: Add transfer termination synchronization support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It appears that the driver misses the support of dmaengine_terminate_sync().
Since many of callers expects this behaviour implement the new
device_synchronize() callback to allow proper synchronization when stopping
a channel.
Fixes: b36f09c3c441 ("dmaengine: Add transfer termination synchronization support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This patch fixes an issue that unexpected retransfering happens
if TCR is set to 0 before rcar_dmac_sync_tcr() writes DE bit to
the CHCR register. For example, sh-sci driver can reproduce this
issue like below:
In rx_timer_fn(): /* CHCR DE bit may be set to 1 */
dmaengine_tx_status()
rcar_dmac_tx_status()
rcar_dmac_chan_get_residue()
rcar_dmac_sync_tcr() /* TCR is possible to be set to 0 */
According to the description of commit 73a47bd0da66 ("dmaengine:
rcar-dmac: use TCRB instead of TCR for residue"), "this buffered data
will be transferred if CHCR::DE bit was cleared". So, this patch
doesn't need to check TCRB register.
Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Compiler complains (with W=1):
drivers/dma/pl330.c: In function ‘pl330_release_channel’:
drivers/dma/pl330.c:1782:21: warning:
variable ‘pl330’ set but not used [-Wunused-but-set-variable]
struct pl330_dmac *pl330;
^~~~~
Remove the pl330 variable in pl330_release_channel as it is set but
never used.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The format specifier "%p" can leak kernel addresses.
Use "%pK" instead.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
'cmd_pause' DMA channel capability means that respective DMA engine
supports both pausing and resuming given DMA channel. However, in some
cases it is important to know if DMA channel can be paused without the
need to resume it. This is a typical requirement for proper residue
reading on transfer timeout in UART drivers. There are also some DMA
engines with limited hardware, which doesn't really support resuming.
Reporting pause and resume capabilities separately allows UART drivers to
properly check for the really required capabilities and operate in DMA
mode also in systems with limited DMA hardware. On the other hand drivers,
which rely on full channel suspend/resume support, should now check for
both 'pause' and 'resume' features.
Existing clients of dma_get_slave_caps() have been checked and the only
driver which rely on proper channel resuming is soc-generic-dmaengine-pcm
driver, which has been updated to check the newly added capability.
Existing 'cmd_pause' now only indicates that DMA engine support pausing
given DMA channel.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We need to clear channel register in error case as recovery.
The channel is already stopped in such case, thus we don't need to call
rcar_dmac_chan_halt() before clearing.
rcar_dmac_chan_halt() will clear and confirm DE bit.
But it will be failed because channel is already stopped in error case.
In other words, we shouldn't call it then.
Reported-by: Hiroki Negishi <hiroki.negishi.bx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Hiroki Negishi <hiroki.negishi.bx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
During system reboot or halt, with lockdep enabled:
================================
WARNING: inconsistent lock state
4.18.0-rc1-salvator-x-00002-g9203dbec90a68103 #41 Tainted: G W
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
reboot/2779 [HC0[0]:SC0[0]:HE1:SE1] takes:
0000000098ae4ad3 (&(&rchan->lock)->rlock){?.-.}, at: rcar_dmac_shutdown+0x58/0x6c
{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x208/0x238
_raw_spin_lock+0x40/0x54
rcar_dmac_isr_channel+0x28/0x200
__handle_irq_event_percpu+0x1c0/0x3c8
handle_irq_event_percpu+0x34/0x88
handle_irq_event+0x48/0x78
handle_fasteoi_irq+0xc4/0x12c
generic_handle_irq+0x18/0x2c
__handle_domain_irq+0xa8/0xac
gic_handle_irq+0x78/0xbc
el1_irq+0xec/0x1c0
arch_cpu_idle+0xe8/0x1bc
default_idle_call+0x2c/0x30
do_idle+0x144/0x234
cpu_startup_entry+0x20/0x24
rest_init+0x27c/0x290
start_kernel+0x430/0x45c
irq event stamp: 12177
hardirqs last enabled at (12177): [<ffffff800881d804>] _raw_spin_unlock_irq+0x2c/0x4c
hardirqs last disabled at (12176): [<ffffff800881d638>] _raw_spin_lock_irq+0x1c/0x60
softirqs last enabled at (11948): [<ffffff8008081da8>] __do_softirq+0x160/0x4ec
softirqs last disabled at (11935): [<ffffff80080ec948>] irq_exit+0xa0/0xfc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&rchan->lock)->rlock);
<Interrupt>
lock(&(&rchan->lock)->rlock);
*** DEADLOCK ***
3 locks held by reboot/2779:
#0: 00000000bfabfa74 (reboot_mutex){+.+.}, at: sys_reboot+0xdc/0x208
#1: 00000000c75d8c3a (&dev->mutex){....}, at: device_shutdown+0xc8/0x1c4
#2: 00000000ebec58ec (&dev->mutex){....}, at: device_shutdown+0xd8/0x1c4
stack backtrace:
CPU: 6 PID: 2779 Comm: reboot Tainted: G W 4.18.0-rc1-salvator-x-00002-g9203dbec90a68103 #41
Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
Call trace:
dump_backtrace+0x0/0x148
show_stack+0x14/0x1c
dump_stack+0xb0/0xf0
print_usage_bug.part.26+0x1c4/0x27c
mark_lock+0x38c/0x610
__lock_acquire+0x3fc/0x14d4
lock_acquire+0x208/0x238
_raw_spin_lock+0x40/0x54
rcar_dmac_shutdown+0x58/0x6c
platform_drv_shutdown+0x20/0x2c
device_shutdown+0x160/0x1c4
kernel_restart_prepare+0x34/0x3c
kernel_restart+0x14/0x5c
sys_reboot+0x160/0x208
el0_svc_naked+0x30/0x34
rcar_dmac_stop_all_chan() takes the channel lock while stopping a
channel, but does not disable interrupts, leading to a deadlock when a
DMAC interrupt comes in. Before, the same code block was called from an
interrupt handler, hence taking the spinlock was sufficient.
Fix this by disabling local interrupts while taking the spinlock.
Fixes: 9203dbec90a68103 ("dmaengine: rcar-dmac: don't use DMAC error interrupt")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
At over 4000 #includes, <linux/platform_device.h> is the 9th most
#included header file in the Linux kernel. It does not need
<linux/mod_devicetable.h>, so drop that header and explicitly add
<linux/mod_devicetable.h> to source files that need it.
4146 #include <linux/platform_device.h>
After this patch, there are 225 files that use <linux/mod_devicetable.h>,
for a reduction of around 3900 times that <linux/mod_devicetable.h>
does not have to be read & parsed.
225 #include <linux/mod_devicetable.h>
This patch was build-tested on 20 different arch-es.
It also makes these drivers SubmitChecklist#1 compliant.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/
Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch is using C++ comment style for SPDX line only,
because driver author want it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some member description or colons missing cause build warning with
'W=1' as below:
drivers/dma/imx-sdma.c:326: warning: Function parameter or member 'vd' not described in 'sdma_desc'
drivers/dma/imx-sdma.c:326: warning: Function parameter or member 'num_bd' not described in 'sdma_desc'
drivers/dma/imx-sdma.c:326: warning: Function parameter or member 'bd_phys' not described in 'sdma_desc'
drivers/dma/imx-sdma.c:326: warning: Function parameter or member 'buf_tail' not described in 'sdma_desc'
drivers/dma/imx-sdma.c:326: warning: Function parameter or member 'buf_ptail' not described in 'sdma_desc'
drivers/dma/imx-sdma.c:326: warning: Function parameter or member 'period_len' not described in 'sdma_desc'
drivers/dma/imx-sdma.c:326: warning: Function parameter or member 'chn_real_count' not described in 'sdma_desc'
drivers/dma/imx-sdma.c:326: warning: Function parameter or member 'chn_count' not described in 'sdma_desc
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reported-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The variable is no longer used, though it is set, so remove it
drivers/dma/imx-sdma.c:1298:6:
warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
int ret, i, count;
^~~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The memory allocation in DMA callbacks should use GFP_NOWAIT, so
update this one and fix code alignment for this call while at it.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
dma_terminate_all maybe called in interrupt context which means
WARN_ON() will be triggered as below when bd memory freed. Allocat
bd memory from dma pool instead.
[ 29.161079] WARNING: CPU: 1 PID: 533 at ./include/linux/dma-mapping.h:541 sdma_free_bd+0xa4/0xb4
[ 29.169883] Modules linked in:
[ 29.172990] CPU: 1 PID: 533 Comm: mpegaudioparse0 Not tainted 4.18.0-rc1-next-20180618-00009-gf79f22c #20
[ 29.182597] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 29.189163] Backtrace:
[ 29.191685] [<c010d1e0>] (dump_backtrace) from [<c010d4a0>] (show_stack+0x18/0x1c)
[ 29.199306] r7:00000000 r6:600f0093 r5:00000000 r4:c107db7c
[ 29.205029] [<c010d488>] (show_stack) from [<c0a5bba0>] (dump_stack+0xb4/0xe8)
[ 29.212312] [<c0a5baec>] (dump_stack) from [<c012703c>] (__warn+0x104/0x130)
[ 29.219411] r9:ec3e817c r8:0000021d r7:00000009 r6:c0d1d440 r5:00000000 r4:00000000
[ 29.227204] [<c0126f38>] (__warn) from [<c0127180>] (warn_slowpath_null+0x44/0x50)
[ 29.234821] r8:ed129dc4 r7:c0b01978 r6:c04d4e90 r5:0000021d r4:c0d1d440
[ 29.241574] [<c012713c>] (warn_slowpath_null) from [<c04d4e90>] (sdma_free_bd+0xa4/0xb4)
[ 29.249706] r6:4c001000 r5:f082e000 r4:00000024
[ 29.254376] [<c04d4dec>] (sdma_free_bd) from [<c04d4eb4>] (sdma_desc_free+0x14/0x20)
[ 29.262163] r7:ec3e8110 r6:00000100 r5:00000200 r4:ecf89a00
[ 29.267873] [<c04d4ea0>] (sdma_desc_free) from [<c04d229c>] (vchan_dma_desc_free_list+0xa4/0xac)
[ 29.276697] r5:00000200 r4:ed129d9c
[ 29.280326] [<c04d21f8>] (vchan_dma_desc_free_list) from [<c04d482c>] (sdma_disable_channel_with_delay+0x14c/0x188)
[ 29.290808] r9:ecae560c r8:ec3e815c r7:00000000 r6:c1008908 r5:ed129dc4 r4:ec3e8110
[ 29.298605] [<c04d46e0>] (sdma_disable_channel_with_delay) from [<c07c5c84>] (snd_dmaengine_pcm_trigger+0x90/0x1b0)
[ 29.309087] r8:ecae5000 r7:ec940800 r6:ed31bd80 r5:ecadb200 r4:ec26a700
[ 29.315855] [<c07c5bf4>] (snd_dmaengine_pcm_trigger) from [<c07dd800>] (soc_pcm_trigger+0xb4/0x130)
[ 29.324953] r8:ecae5000 r7:ec940800 r6:00000000 r5:ecadb200 r4:ec26a700
[ 29.331716] [<c07dd74c>] (soc_pcm_trigger) from [<c07bc008>] (snd_pcm_do_stop+0x58/0x5c)
[ 29.339859] r9:ecaed5a8 r8:ed31bdc0 r7:00000000 r6:00000001 r5:ecadb200 r4:c0b9c4d0
[ 29.347652] [<c07bbfb0>] (snd_pcm_do_stop) from [<c07bbde8>] (snd_pcm_action_single+0x40/0x80)
[ 29.356315] [<c07bbda8>] (snd_pcm_action_single) from [<c07bbf1c>] (snd_pcm_action+0xf4/0xfc)
[ 29.364883] r7:00000001 r6:c0b9c4d0 r5:ecadb2d4 r4:ecadb200
[ 29.370593] [<c07bbe28>] (snd_pcm_action) from [<c07bc8dc>] (snd_pcm_drop+0x58/0x9c)
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
