summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2019-08-08dmaengine: qcom: hidma_mgmt: Add of_node_put() before gotoNishka Dasgupta
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put under the label that the gotos point to. In order to avoid decrementing an already-decremented refcount, copy the original contents of the label (including the return statement) to just above the label, so that the code under the label is executed only when a goto exit from the loop occurs. Additionally, remove an unnecessary get/put pair from the loop, as the loop itself already keeps track of refcount. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20190724081609.9724-1-nishkadg.linux@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08dmaengine: fsl-edma: add i.mx7ulp edma2 version supportRobin Gong
Add edma2 for i.mx7ulp by version v3, since v2 has already been used by mcf-edma. The big changes based on v1 are belows: 1. only one dmamux. 2. another clock dma_clk except dmamux clk. 3. 16 independent interrupts instead of only one interrupt for all channels. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1563952834-7731-1-git-send-email-yibin.gong@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08dmaengine: qcom_hidma: Remove call to memset after dmam_alloc_coherentFuqian Huang
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Acked-by: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20190715031723.6375-1-huangfq.daxian@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-08-08dmaengine: imx-sdma: Remove call to memset after dma_alloc_coherentFuqian Huang
In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190715031716.6328-1-huangfq.daxian@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-31dmaengine: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Vinod Koul <vkoul@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: dmaengine@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-11-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-31dmaengine: imx-dma: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/dma/imx-dma.c: In function ‘imxdma_xfer_desc’: drivers/dma/imx-dma.c:542:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (slot == IMX_DMA_2D_SLOT_A) { ^ drivers/dma/imx-dma.c:559:2: note: here case IMXDMA_DESC_MEMCPY: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20190729225221.GA24269@embeddedor Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-31dmaengine: tegra210-adma: Don't program FIFO thresholdJonathan Hunter
The Tegra210 ADMA supports two modes for transferring data to a FIFO which are ... 1. Transfer data to/from the FIFO as soon as a single burst can be transferred. 2. Transfer data to/from the FIFO based upon FIFO thresholds, where the FIFO threshold is specified in terms on multiple bursts. Currently, the ADMA driver programs the FIFO threshold values in the FIFO_CTRL register, but never enables the transfer mode that uses these threshold values. Given that these have never been used so far, simplify the ADMA driver by removing the programming of these threshold values. Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20190731101639.22755-1-jonathanh@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-30dma: Drop JZ4740 driverPaul Cercueil
The newer and better JZ4780 driver is now used to provide DMA functionality on the JZ4740. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com>
2019-07-29dmaengine: stm32-mdma: Switch to use device_property_count_u32()Andy Shevchenko
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190723190757.67351-2-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29dmaengine: stm32-dmamux: Switch to use device_property_count_u32()Andy Shevchenko
Use use device_property_count_u32() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190723190757.67351-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29dmaengine: ti: edma: Support for polled (memcpy) completionPeter Ujfalusi
When a DMA client driver does not set the DMA_PREP_INTERRUPT because it does not want to use interrupts for DMA completion or because it can not rely on DMA interrupts due to executing the memcpy when interrupts are disabled it will poll the status of the transfer. Since we can not tell from any EDMA register that the transfer is completed, we can only know that the paRAM set has been sent to TPTC for processing we need to check the residue of the transfer, if it is 0 then the transfer is completed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190716082655.1620-4-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29dmaengine: ti: edma: Correct the residue calculation (fix for memcpy)Peter Ujfalusi
For memcpy we never stored the start address of the transfer for the pset which rendered the memcpy residue calculation completely broken. In the edma_residue() function we also need to to some correction for the calculations: Instead waiting for all EDMA channels to be idle (in a busy system it can take few iteration to hit a point when all queues are idle) wait for the event pending on the given channel (SH_ER for hw synchronized channels, SH_ESR for manually triggered channels). If the position returned by EMDA is 0 it implies that the last paRAM set has been consumed and we are at the closing dummy set, thus we can conclude that the transfer is completed and we can return 0 as residue. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [vkoul: fixed typo in commit log] Link: https://lore.kernel.org/r/20190716082655.1620-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29dmaengine: ti: edma: Clean up the 2x32bit array register accessesPeter Ujfalusi
Introduce defines for getting the array index and the bit number within the 64bit array register pairs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190716082655.1620-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29dmaengine: ti: omap-dma: Improved memcpy polling supportPeter Ujfalusi
When a DMA client driver does not set the DMA_PREP_INTERRUPT because it does not want to use interrupts for DMA completion or because it can not rely on DMA interrupts due to executing the memcpy when interrupts are disabled it will poll the status of the transfer. If the interrupts are enabled then the cookie will be set completed in the interrupt handler so only check in HW completion when the polling is really needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190716082459.1222-3-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29dmaengine: ti: omap-dma: Readability cleanup in omap_dma_tx_status()Peter Ujfalusi
The tx_status is most likely going to be asked for the current transfer, so check that first then try to fall back to lookup of non started transfers. In this way the code is a bit more readable and in most cases we will avoid to run vchan_find_desc() all the time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190716082459.1222-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-25dmaengine: dma-jz4780: Break descriptor chains on JZ4740Paul Cercueil
The current driver works perfectly fine on every generation of the JZ47xx SoCs, except on the JZ4740. There, when hardware descriptors are chained together (with the LINK bit set), the next descriptor isn't automatically fetched as it should - instead, an interrupt is raised, even if the TIE bit (Transfer Interrupt Enable) bit is cleared. When it happens, the DMA transfer seems to be stopped (it doesn't chain), and it's uncertain how many bytes have actually been transferred. Until somebody smarter than me can figure out how to make chained descriptors work on the JZ4740, we now disable chained descriptors on that particular SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20190714215504.10877-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-25dmaengine: tegra210-adma: Fix unused function warningsYueHaibing
If CONFIG_PM is not set, build warnings: drivers/dma/tegra210-adma.c:747:12: warning: tegra_adma_runtime_resume defined but not used [-Wunused-function] static int tegra_adma_runtime_resume(struct device *dev) drivers/dma/tegra210-adma.c:715:12: warning: tegra_adma_runtime_suspend defined but not used [-Wunused-function] static int tegra_adma_runtime_suspend(struct device *dev) Mark the two function as __maybe_unused. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Fixes: 3145d73e69ba ("dmaengine: tegra210-adma: remove PM_CLK dependency") Fixes: f46b195799b5 ("dmaengine: tegra-adma: Add support for Tegra210 ADMA") Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20190709083258.57112-1-yuehaibing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-25dmaengine: tegra-apb: Support per-burst residue granularityDmitry Osipenko
Tegra's APB DMA engine updates words counter after each transferred burst of data, hence it can report transfer's residual with more fidelity which may be required in cases like audio playback. In particular this fixes audio stuttering during playback in a chromium web browser. The patch is based on the original work that was made by Ben Dooks and a patch from downstream kernel. It was tested on Tegra20 and Tegra30 devices. Link: https://lore.kernel.org/lkml/20190424162348.23692-1-ben.dooks@codethink.co.uk/ Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-4.4.git;a=commit;h=c7bba40c6846fbf3eaad35c4472dcc7d8bbc02e5 Inspired-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20190705150519.18171-1-digetx@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: ste_dma40: fix unneeded variable warningArnd Bergmann
clang-9 points out that there are two variables that depending on the configuration may only be used in an ARRAY_SIZE() expression but not referenced: drivers/dma/ste_dma40.c:145:12: error: variable 'd40_backup_regs' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs[] = { ^ drivers/dma/ste_dma40.c:214:12: error: variable 'd40_backup_regs_chan' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration] static u32 d40_backup_regs_chan[] = { Mark these __maybe_unused to shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190712091357.744515-1-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: dw-edma: fix endianess confusionArnd Bergmann
When building with 'make C=1', sparse reports an endianess bug: drivers/dma/dw-edma/dw-edma-v0-debugfs.c:60:30: warning: cast removes address space of expression drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: warning: incorrect type in argument 1 (different address spaces) drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: expected void const volatile [noderef] <asn:2>*addr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: got void *[assigned] ptr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: warning: incorrect type in argument 1 (different address spaces) drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: expected void const volatile [noderef] <asn:2>*addr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: got void *[assigned] ptr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: warning: incorrect type in argument 1 (different address spaces) drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: expected void const volatile [noderef] <asn:2>*addr drivers/dma/dw-edma/dw-edma-v0-debugfs.c:86:24: got void *[assigned] ptr The current code is clearly wrong, as it passes an endian-swapped word into a register function where it gets swapped again. Just pass the variables directly into lower_32_bits()/upper_32_bits(). Fixes: 7e4b8a4fbe2c ("dmaengine: Add Synopsys eDMA IP version 0 support") Link: https://lore.kernel.org/lkml/20190617131820.2470686-1-arnd@arndb.de/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/20190722124457.1093886-3-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: dw-edma: fix __iomem type confusionArnd Bergmann
The new driver mixes up dma_addr_t and __iomem pointers, which results in warnings on some 32-bit architectures, like: drivers/dma/dw-edma/dw-edma-v0-core.c: In function '__dw_regs': drivers/dma/dw-edma/dw-edma-v0-core.c:28:9: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] return (struct dw_edma_v0_regs __iomem *)dw->rg_region.vaddr; Make it use __iomem pointers consistently here, and avoid using dma_addr_t for __iomem tokens altogether. A small complication here is the debugfs code, which passes an __iomem token as the private data for debugfs files, requiring the use of extra __force. Fixes: 7e4b8a4fbe2c ("dmaengine: Add Synopsys eDMA IP version 0 support") Link: https://lore.kernel.org/lkml/20190617131918.2518727-1-arnd@arndb.de/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190722124457.1093886-2-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: dw-edma: fix unnecessary stack usageArnd Bergmann
Putting large constant data on the stack causes unnecessary overhead and stack usage: drivers/dma/dw-edma/dw-edma-v0-debugfs.c:285:6: error: stack frame size of 1376 bytes in function 'dw_edma_v0_debugfs_on' [-Werror,-Wframe-larger-than=] Mark the variable 'static const' in order for the compiler to move it into the .rodata section where it does no such harm. Fixes: 305aebeff879 ("dmaengine: Add Synopsys eDMA IP version 0 debugfs support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/20190722124457.1093886-1-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: bcm2835: Print error in case setting DMA mask failsStefan Wahren
During enabling of the RPi 4, we found out that the driver doesn't provide a helpful error message in case setting DMA mask fails. So add one. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/1563297318-4900-1-git-send-email-wahrenst@gmx.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: edma: make edma_filter_fn privateArnd Bergmann
With the audio driver no longer referring to this function, it can be made private to the dmaengine driver itself, and the header file removed. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190722081705.2084961-2-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-22dmaengine: omap-dma: make omap_dma_filter_fn privateArnd Bergmann
With the audio driver no longer referring to this function, it can be made private to the dmaengine driver itself, and the header file removed. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/lkml/20190307151646.1016966-1-arnd@arndb.de/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190722081705.2084961-1-arnd@arndb.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-07-13Merge tag 'mtd/for-5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-07-08dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"Vinod Koul
This reverts commit 7144afd025b2 ("dmaengine: fsl-edma: add i.mx7ulp edma2 version support") as this fails to build with module option due to usage of of_irq_count() which is not an exported symbol as kernel drivers are *not* expected to use it (rightly so). Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-07dmaengine: at_xdmac: check for non-empty xfers_list before invoking callbackRaag Jadav
tx descriptor retrieved from an empty xfers_list may not have valid pointers to the callback functions. Avoid calling dmaengine_desc_get_callback_invoke if xfers_list is empty. Signed-off-by: Raag Jadav <raagjadav@gmail.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-06Merge tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: - bam_dma fix for completed descriptor count - fix for imx-sdma remove BD_INTR for channel0 and use-after-free on probe error path - endian bug fix in jz4780 IRQ handler * tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: qcom: bam_dma: Fix completed descriptors count dmaengine: imx-sdma: remove BD_INTR for channel0 dmaengine: imx-sdma: fix use-after-free on probe error path dmaengine: jz4780: Fix an endian bug in IRQ handler
2019-07-05dmaengine: qcom: bam_dma: Fix completed descriptors countSricharan R
One space is left unused in circular FIFO to differentiate 'full' and 'empty' cases. So take that in to account while counting for the descriptors completed. Fixes the issue reported here, https://lkml.org/lkml/2019/6/18/669 Cc: stable@vger.kernel.org Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: imx-sdma: remove BD_INTR for channel0Robin Gong
It is possible for an irq triggered by channel0 to be received later after clks are disabled once firmware loaded during sdma probe. If that happens then clearing them by writing to SDMA_H_INTR won't work and the kernel will hang processing infinite interrupts. Actually, don't need interrupt triggered on channel0 since it's pollling SDMA_H_STATSTOP to know channel0 done rather than interrupt in current code, just clear BD_INTR to disable channel0 interrupt to avoid the above case. This issue was brought by commit 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") which didn't take care the above case. Fixes: 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") Cc: stable@vger.kernel.org #5.0+ Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reported-by: Sven Van Asbroeck <thesven73@gmail.com> Tested-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: imx-sdma: fix use-after-free on probe error pathSven Van Asbroeck
If probe() fails anywhere beyond the point where sdma_get_firmware() is called, then a kernel oops may occur. Problematic sequence of events: 1. probe() calls sdma_get_firmware(), which schedules the firmware callback to run when firmware becomes available, using the sdma instance structure as the context 2. probe() encounters an error, which deallocates the sdma instance structure 3. firmware becomes available, firmware callback is called with deallocated sdma instance structure 4. use after free - kernel oops ! Solution: only attempt to load firmware when we're certain that probe() will succeed. This guarantees that the firmware callback's context will remain valid. Note that the remove() path is unaffected by this issue: the firmware loader will increment the driver module's use count, ensuring that the module cannot be unloaded while the firmware callback is pending or running. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Robin Gong <yibin.gong@nxp.com> [vkoul: fixed braces for if condition] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: jz4780: Fix an endian bug in IRQ handlerDan Carpenter
The "pending" variable was a u32 but we cast it to an unsigned long pointer when we do the for_each_set_bit() loop. The problem is that on big endian 64bit systems that results in an out of bounds read. Fixes: 4e4106f5e942 ("dmaengine: jz4780: Fix transfers being ACKed too soon") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: tegra210-adma: remove PM_CLK dependencySameer Pujar
Tegra ADMA does not use pm-clk interface now and hence the dependency is removed from Kconfig. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma: add i.mx7ulp edma2 version supportRobin Gong
Add edma2 for i.mx7ulp by version v3, since v2 has already been used by mcf-edma. The big changes based on v1 are belows: 1. only one dmamux. 2. another clock dma_clk except dmamux clk. 3. 16 independent interrupts instead of only one interrupt for all channels. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma-common: version check for v2 insteadRobin Gong
The next v3 i.mx7ulp edma is based on v1, so change version check logic for v2 instead. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma-common: move dmamux register to another single functionRobin Gong
Prepare for edmav2 on i.mx7ulp whose dmamux register is 32bit. No function impacted. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: fsl-edma: add drvdata for fsl-edmaRobin Gong
There are some differences between vf610 and next i.mx7ulp. Put such differences into static driver data for distinguishing easily at driver level. Change mcf-edma accordingly. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Angelo Dureghello <angelo@sysam.it> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-03dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"Fabio Estevam
This reverts commit 002905eca5bedab08bafd9e325bbbb41670c7712. Commit 002905eca5be ("dmaengine: fsl-edma: support little endian for edma driver") incorrectly assumed that there was not little endian support in the driver. This causes hangs on Vybrid, so revert it so that Vybrid systems could boot again. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-27mtd: rawnand: gpmi: Implement exec_opSascha Hauer
The gpmi driver performance suffers from NAND operations being split in multiple small DMA transfers. This has been forced by the NAND layer in the former days, but now with exec_op we can use the controller as intended. With this patch gpmi_nfc_exec_op becomes the main entry point to NAND operations. Here all instructions are collected and chained as separate DMA transfers. In the end whole chain is fired and waited to be finished. gpmi_nfc_exec_op only does the hardware operations, bad block marker swapping and buffer scrambling is done by the callers. It's worth noting that the nand_*_op functions always take the buffer lengths for the data that the NAND chip actually transfers. When doing BCH we have to calculate the net data size from the raw data size in some places. This patch has been tested with 2048/64 and 2048/128 byte NAND on i.MX6q. mtd_oobtest, mtd_subpagetest and mtd_speedtest run without errors. nandbiterrs, nandpagetest and nandsubpagetest userspace tests from mtdutils run without errors and UBIFS can successfully be mounted. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: rename custom flagSascha Hauer
The mxs dma driver uses the flags parameter in dmaengine_prep_slave_sg() for custom flags, but still uses the dmaengine specific names of the flags. Do a little bit better and at least give the flag a custom name. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: Add header file to be shared with gpmi nand driverSascha Hauer
The mxs dma driver can do PIO transfers. A pointer to the PIO words to transfer is passed in the struct scatterlist * argument of dmaengine_prep_slave_sg(). It's quite ugly and non obvious to cast u32 * to struct scatterlist * each time when calling dmaengine_prep_slave_sg(), so add a static inline wrapper function to be called by the user along with a description what is going on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: Drop unnecessary flagSascha Hauer
The mxs dma driver insists on having the DMA_PREP_INTERRUPT flag set on all but the first transfer. There's no need to let the user set this flag, the driver can do it internally whenever it needs it. Drop handling of this flag from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-25dmaengine: rcar-dmac: Reject zero-length slave DMA requestsGeert Uytterhoeven
While the .device_prep_slave_sg() callback rejects empty scatterlists, it still accepts single-entry scatterlists with a zero-length segment. These may happen if a driver calls dmaengine_prep_slave_single() with a zero len parameter. The corresponding DMA request will never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and DMA timeouts. Although requesting a zero-length DMA request is a driver bug, rejecting it early eases debugging. Note that the .device_prep_dma_memcpy() callback already rejects requests to copy zero bytes. Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com> Analyzed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart LakeAndy Shevchenko
Intel Elkhart Lake OSE (Offload Service Engine) provides few DMA controllers to the host. Enable them in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dw-edma: fix semicolon.cocci warningskbuild test robot
drivers/dma/dw-edma/dw-edma-core.c:617:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") CC: Gustavo Pimentel <Gustavo.Pimentel@synopsys.com> Signed-off-by: kbuild test robot <lkp@intel.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: sh: usb-dmac: Use [] to denote a flexible array memberGeert Uytterhoeven
Flexible array members should be denoted using [] instead of [0], else gcc will not warn when they are no longer at the end of the structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dmatest: timeout value of -1 should specify infinite waitHook, Gary
The dmatest module parameter 'timeout' is documented as accepting a -1 to mean "infinite timeout". However, an infinite timeout is not advised, nor possible since the module parameter is an unsigned int, which won't accept a negative value. Change the parameter comment to reflect current behavior, which allows values from 0 up to 4294967295 (0xFFFFFFFF). Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-25dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bitAndy Shevchenko
In the same way as done for ->probe(), call ->remove() based on the type of the hardware. While it works now due to equivalency of the two removal functions, it might be changed in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 02:04:14 +0000