summaryrefslogtreecommitdiff
path: root/drivers/dma
AgeCommit message (Collapse)Author
2020-01-13dmaengine: ti: omap-dma: don't allow a null od->plat pointer to be dereferencedColin Ian King
Currently when the call to dev_get_platdata returns null the driver issues a warning and then later dereferences the null pointer. Avoid this issue by returning -ENODEV error rather when the platform data is null and change the warning to an appropriate error message. Addresses-Coverity: ("Dereference after null check") Fixes: 211010aeb097 ("dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use it") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-30dmaengine: ti: omap-dma: Use cpu notifier to block idle for omap2Tony Lindgren
For omap2, we need to block idle if SDMA is busy. Let's do this with a cpu notifier and remove the custom call. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-30dmaengine: ti: omap-dma: Allocate channels directlyTony Lindgren
With the legacy IRQ handling gone, we can now start allocating channels directly in the dmaengine driver for device tree based SoCs. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-30dmaengine: ti: omap-dma: Pass sdma auxdata to driver and use itTony Lindgren
We can now start passing sdma auxdata to the dmaengine driver to start removing the platform based sdma init. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-30dmaengine: ti: omap-dma: Configure global priority register directlyTony Lindgren
We can move the global priority register configuration to the dmaengine driver and configure it based on the of_device_id match data. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-27ioat: ioat_alloc_ring() failure handling.Alexander.Barabash@dell.com
If dma_alloc_coherent() returns NULL in ioat_alloc_ring(), ring allocation must not proceed. Until now, if the first call to dma_alloc_coherent() in ioat_alloc_ring() returned NULL, the processing could proceed, failing with NULL-pointer dereferencing further down the line. Signed-off-by: Alexander Barabash <alexander.barabash@dell.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/75e9c0e84c3345d693c606c64f8b9ab5@x13pwhopdag1307.AMER.DELL.COM Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: imx-sdma: Fix memory leakSascha Hauer
The current descriptor is not on any list of the virtual DMA channel. Once sdma_terminate_all() is called when a descriptor is currently in flight then this one is forgotten to be freed. We have to call vchan_terminate_vdesc() on this descriptor to re-add it to the lists. Now that we also free the currently running descriptor we can (and actually have to) remove the current descriptor from its list also for the cyclic case. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Robin Gong <yibin.gong@nxp.com> Tested-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/20191216105328.15198-10-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: imx-sdma: find desc first in sdma_tx_statusSascha Hauer
In sdma_tx_status() we must first find the current sdma_desc. In cyclic mode we assume that this can always be found with vchan_find_desc(). This is true because do not remove the current descriptor from the desc_issued list: /* * Do not delete the node in desc_issued list in cyclic mode, otherwise * the desc allocated will never be freed in vchan_dma_desc_free_list */ if (!(sdmac->flags & IMX_DMA_SG_LOOP)) list_del(&vd->node); We will change this in the next step, so check if the current descriptor is the desired one also for the cyclic case. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20191216105328.15198-9-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: imx-sdma: rename functionSascha Hauer
Rename sdma_disable_channel_async() after the hook it implements, like done for all other functions in the SDMA driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20191216105328.15198-8-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: use vchan_vdesc_fini() to free descriptorsSascha Hauer
vchan_dma_desc_free_list() basically open codes vchan_vdesc_fini() in its loop body. Call it directly rather than duplicating the code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191216105328.15198-7-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: Add missing locking around list operationsSascha Hauer
All list operations are protected by &vc->lock. As vchan_vdesc_fini() is called unlocked add the missing locking around the list operations. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191216105328.15198-6-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: Do not call desc_free() under a spin_lockSascha Hauer
vchan_vdesc_fini() shouldn't be called under a spin_lock. This is done in two places, once in vchan_terminate_vdesc() and once in vchan_synchronize(). Instead of freeing the vdesc right away, collect the aborted vdescs on a separate list and free them along with the other vdescs. The terminated descs are also freed in vchan_synchronize as done before this patch. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191216105328.15198-5-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: remove debug messageSascha Hauer
vchan_dma_desc_free_list() basically open codes vchan_vdesc_fini() in the loop body. One difference is an additional debug message. As this isn't overly useful remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191216105328.15198-4-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: virt-dma: Add missing lockingSascha Hauer
Originally freeing descriptors was split into a locked and an unlocked part. The locked part in vchan_get_all_descriptors() collected all descriptors on a separate list_head. This was done to allow iterating over that new list in vchan_dma_desc_free_list() without a lock held. This became broken in 13bb26ae8850 ("dmaengine: virt-dma: don't always free descriptor upon completion"). With this commit vchan_dma_desc_free_list() no longer exclusively operates on the separate list, but starts to put descriptors which can be reused back on &vc->desc_allocated. This list operation should have been locked, but wasn't. In the mean time drivers started to call vchan_dma_desc_free_list() with their lock held so that we now have the situation that vchan_dma_desc_free_list() is called locked from some drivers and unlocked from others. To clean this up we have to do two things: 1. Add missing locking in vchan_dma_desc_free_list() 2. Make sure drivers call vchan_dma_desc_free_list() unlocked This needs to be done atomically, so in this patch the locking is added and all drivers are fixed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Green Wan <green.wan@sifive.com> Tested-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191216105328.15198-3-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: bcm2835: do not call vchan_vdesc_fini() with lock heldSascha Hauer
vchan_vdesc_fini() can't be called locked. Instead, call vchan_terminate_vdesc() which delays the freeing of the descriptor to vchan_synchronize(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20191216105328.15198-2-s.hauer@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: print more meaningful error messageVinod Koul
error log for dma_channel_table_init() failure pointed a mere "initialization failure", which is not very helpful message, so print additional details like function name and error code. Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: move module_/dma_device_put() after route freeVinod Koul
We call dma_device_put() and module_put() after invoking .device_free_chan_resources callback, but we should also take care of router devices and invoke this after .route_free callback. So move it after .route_free Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: ioat: Support in-use unbindLogan Gunthorpe
Don't allocate memory using the devm infrastructure and instead call kfree with the new dmaengine device_release call back. This ensures the structures are available until the last reference is dropped. We also need to ensure we call ioat_shutdown() in ioat_remove() so that all the channels are quiesced and further transaction fails. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20191216190120.21374-6-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Add reference counting to dma_device structLogan Gunthorpe
Adding a reference count helps drivers to properly implement the unbind while in use case. References are taken and put every time a channel is allocated or freed. Once the final reference is put, the device is removed from the dma_device_list and a release callback function is called to signal the driver to free the memory. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-5-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Move dma_channel_rebalance() infrastructure up in codeLogan Gunthorpe
So it can be called by a release function which is needed higher up in the code. No functional changes intended. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-4-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Call module_put() after device_free_chan_resources()Logan Gunthorpe
The module reference is taken to ensure the callbacks still exist when they are called. If the channel holds the last reference to the module, the module can disappear before device_free_chan_resources() is called and would cause a call into free'd memory. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-3-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Store module owner in dma_device structLogan Gunthorpe
dma_chan_to_owner() dereferences the driver from the struct device to obtain the owner and call module_[get|put](). However, if the backing device is unbound before the dma_device is unregistered, the driver will be cleared and this will cause a NULL pointer dereference. Instead, store a pointer to the owner module in the dma_device struct so the module reference can be properly put when the channel is put, even if the backing device was destroyed first. This change helps to support a safer unbind of DMA engines. If the dma_device is unregistered in the driver's remove function, there's no guarantee that there are no existing clients and a users action may trigger the WARN_ONCE in dma_async_device_unregister() which is unlikely to leave the system in a consistent state. Instead, a better approach is to allow the backing driver to go away and fail any subsequent requests to it. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-2-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-23dmaengine: virt-dma: Fix access after free in vchan_complete()Peter Ujfalusi
vchan_vdesc_fini() is freeing up 'vd' so the access to vd->tx_result is via already freed up memory. Move the vchan_vdesc_fini() after invoking the callback to avoid this. Fixes: 09d5b702b0f97 ("dmaengine: virt-dma: store result on dma descriptor") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191220131100.21804-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-23dmaengine: k3dma: Avoid null pointer traversalJohn Stultz
In some cases we seem to submit two transactions in a row, which causes us to lose track of the first. If we then cancel the request, we may still get an interrupt, which traverses a null ds_run value. So try to avoid starting a new transaction if the ds_run value is set. While this patch avoids the null pointer crash, I've had some reports of the k3dma driver still getting confused, which suggests the ds_run/ds_done value handling still isn't quite right. However, I've not run into an issue recently with it so I think this patch is worth pushing upstream to avoid the crash. Signed-off-by: John Stultz <john.stultz@linaro.org> [add ss tag] Link: https://lore.kernel.org/r/20191218190906.6641-1-john.stultz@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-23dmaengine: JZ4780: Add support for the X1830.周琰杰 (Zhou Yanjie)
Add support for probing the dma-jz4780 driver on the X1830 Soc. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1576591140-125668-4-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-18dmaengine: fsl-edma: Add eDMA support for QorIQ LS1028A platformPeng Ma
Our platforms(such as LS1021A, LS1012A, LS1043A, LS1046A, LS1028A) with below registers(CHCFG0 - CHCFG15) of eDMA as follows: *-----------------------------------------------------------* | Offset | OTHERS | LS1028A | |--------------|--------------------|-----------------------| | 0x0 | CHCFG0 | CHCFG3 | |--------------|--------------------|-----------------------| | 0x1 | CHCFG1 | CHCFG2 | |--------------|--------------------|-----------------------| | 0x2 | CHCFG2 | CHCFG1 | |--------------|--------------------|-----------------------| | 0x3 | CHCFG3 | CHCFG0 | |--------------|--------------------|-----------------------| | ... | ...... | ...... | |--------------|--------------------|-----------------------| | 0xC | CHCFG12 | CHCFG15 | |--------------|--------------------|-----------------------| | 0xD | CHCFG13 | CHCFG14 | |--------------|--------------------|-----------------------| | 0xE | CHCFG14 | CHCFG13 | |--------------|--------------------|-----------------------| | 0xF | CHCFG15 | CHCFG12 | *-----------------------------------------------------------* This patch is to improve edma driver to fit LS1028A platform. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/20191212033714.4090-1-peng.ma@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-18dmaengine: ti: edma: Fix error return code in edma_probe()Wei Yongjun
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 2a03c1314506 ("dmaengine: ti: edma: add missed operations") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191212114622.127322-1-weiyongjun1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-17dmaengine: ti: omap-dma: Add device tree match data and use it for cpu_pmTony Lindgren
With old DMA code disabled for handling DMA requests for device tree based SoCs, we can move omap3 specific context save and restore to the dmaengine driver. Let's do this by adding cpu_pm notifier handling to save and restore context, and enable it based on device tree match data. This way we can use the match data later to configure more SoC specific features later on too. Note that we only clear the channels in use while the platform code also clears reserved channels 0 and 1 on high-security SoCs. Based on testing on n900, this is not needed though and the system idles just fine. With the dmaengine driver handling context save and restore, we must now remove the old custom calls for context save and restore. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-12-11dmaengine: dma-jz4780: Also break descriptor chains on JZ4725BPaul Cercueil
It turns out that the JZ4725B displays the same buggy behaviour as the JZ4740 that was described in commit f4c255f1a747 ("dmaengine: dma-jz4780: Break descriptor chains on JZ4740"). Work around it by using the same workaround previously used for the JZ4740. Fixes commit f4c255f1a747 ("dmaengine: dma-jz4780: Break descriptor chains on JZ4740") Cc: <stable@vger.kernel.org> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20191210165545.59690-1-paul@crapouillou.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-11dmaengine: axi-dmac: add a check for devm_regmap_init_mmioChuhong Yuan
The driver misses checking the result of devm_regmap_init_mmio(). Add a check to fix it. Fixes: fc15be39a827 ("dmaengine: axi-dmac: add regmap support") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191209085711.16001-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-10dmaengine: pl330: Convert to the *_late and *_early system sleep callbacksUlf Hansson
It has turned out that it's in general a good idea for dmaengines to allow DMA requests during the entire dpm_suspend() phase. Therefore, convert the pl330 driver into using SET_LATE_SYSTEM_SLEEP_PM_OPS. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20191205143746.24873-3-ulf.hansson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-10dmaengine: pl330: Drop boilerplate code for suspend/resumeUlf Hansson
Let's drop the boilerplate code in the system suspend/resume callbacks and convert to use pm_runtime_force_suspend|resume(). This change also has a nice side effect, as pm_runtime_force_resume() may decide to leave the device in low power state, when that is feasible, thus avoiding to waste both time and energy during system resume. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20191205143746.24873-2-ulf.hansson@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-10dmaengine: ti: edma: add missed operationsChuhong Yuan
The driver forgets to call pm_runtime_disable and pm_runtime_put_sync in probe failure and remove. Add the calls and modify probe failure handling to fix it. To simplify the fix, the patch adjusts the calling order and merges checks for devm_kcalloc. Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191124052855.6472-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1574306348-29212-1-git-send-email-krzk@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: sf-pdma: move macro to header fileGreen Wan
The place where the macro, SF_PDMA_REG_BASE(), is cause kernel-doc using wrong function declaration. Move it to header file. Signed-off-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191118143554.16129-2-green.wan@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: sf-pdma: replace /** with /* for non-function commentGreen Wan
There are several comments starting from "/**" but not for function comment purpose. It causes kernel-doc parsing wrong string. Replace "/**" with "/*" to fix them. Signed-off-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191118143554.16129-1-green.wan@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: ti: edma: fix missed failure handlingChuhong Yuan
When devm_kcalloc fails, it forgets to call edma_free_slot. Replace direct return with failure handler to fix it. Fixes: 1be5336bc7ba ("dmaengine: edma: New device tree binding") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191118073802.28424-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: mmp_pdma: add missed of_dma_controller_freeChuhong Yuan
The driver calls of_dma_controller_register in probe but does not free it in remove. Add the call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191115083153.12334-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22dmaengine: mmp_tdma: add missed of_dma_controller_freeChuhong Yuan
The driver calls of_dma_controller_register in probe but does not free it in remove. Add the call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191115083100.12220-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: sprd: Add wrap address support for link-list modeEric Long
The Spreadtrum Audio compress offload mode will use 2-stage DMA transfer to save power. That means we can request 2 dma channels, one for source channel, and another one for destination channel. Once the source channel's transaction is done, it will trigger the destination channel's transaction automatically by hardware signal. In this case, the source channel will transfer data from IRAM buffer to the DSP fifo to decoding/encoding, once IRAM buffer is empty by transferring done, the destination channel will start to transfer data from DDR buffer to IRAM buffer. Since the destination channel will use link-list mode to fill the IRAM data, and IRAM buffer is allocated by 32K, and DDR buffer is larger to 2M, that means we need lots of link-list nodes to do a cyclic transfer, instead wasting lots of link-list memory, we can use wrap address support to reduce link-list node number, which means when the transfer address reaches the wrap address, the transfer address will jump to the wrap_to address specified by wrap_to register, and only 2 link-list nodes can do a cyclic transfer to transfer data from DDR to IRAM. Thus this patch adds wrap address to support this case. [Baolin Wang changes the commit message] Signed-off-by: Eric Long <eric.long@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/85a5484bc1f3dd53ce6f92700ad8b35f30a0b096.1571812029.git.baolin.wang@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14Merge branch 'fixes' into nextVinod Koul
2019-11-14dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00Green Wan
Add PDMA driver, sf-pdma, to enable DMA engine on HiFive Unleashed Rev A00 board. - Implement dmaengine APIs, support MEM_TO_MEM async copy. - Tested by DMA Test client - Supports 4 channels DMA, each channel has 1 done and 1 err interrupt connected to platform-level interrupt controller (PLIC). - Depends on DMA_ENGINE and DMA_VIRTUAL_CHANNELS The datasheet is here: https://static.dev.sifive.com/FU540-C000-v1.0.pdf Follow the DMAengine controller doc, "./Documentation/driver-api/dmaengine/provider.rst" to implement DMA engine. And use the dma test client in doc, "./Documentation/driver-api/dmaengine/dmatest.rst", to test. Each DMA channel has separate HW regs and support done and error ISRs. 4 channels share 1 done and 1 err ISRs. There's no expander/arbitrator in DMA HW. ------ ------ | |--< done 23 >--|ch 0| | |--< err 24 >--| | (dma0chan0) | | ------ | | ------ | |--< done 25 >--|ch 1| | |--< err 26 >--| | (dma0chan1) |PLIC| ------ | | ------ | |--< done 27 >--|ch 2| | |--< err 28 >--| | (dma0chan2) | | ------ | | ------ | |--< done 29 >--|ch 3| | |--< err 30 >--| | (dma0chan3) ------ ------ Signed-off-by: Green Wan <green.wan@sifive.com> Link: https://lore.kernel.org/r/20191107084955.7580-4-green.wan@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: zx: remove: removed dmam_pool_destroySatendra Singh Thakur
In the probe method dmam_pool_create is used. Therefore, there is no need to explicitly call dmam_pool_destroy in remove method as this will be automatically taken care by devres Signed-off-by: Satendra Singh Thakur <sst2005@gmail.com> Link: https://lore.kernel.org/r/20191109113609.6159-1-sst2005@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq ↵Satendra Singh Thakur
fails When devm_request_irq fails, currently, the function dma_async_device_unregister gets called. This doesn't free the resources allocated by of_dma_controller_register. Therefore, we have called of_dma_controller_free for this purpose. Signed-off-by: Satendra Singh Thakur <sst2005@gmail.com> Link: https://lore.kernel.org/r/20191109113523.6067-1-sst2005@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14dmaengine: iop-adma: clean up an indentation issueColin Ian King
There is a statement that is indented too deeply, remove the extraneous indentation. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191112191143.282814-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-08dmaengine: milbeaut-xdmac: remove redundant error logVinod Koul
platform_get_irq() prints the error message, so caller need not do so, remove the error line in this driver for platform_get_irq() Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191106163128.1980714-2-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-08dmaengine: milbeaut-hdmac: remove redundant error logVinod Koul
platform_get_irq() prints the error message, so caller need not do so, remove the error line in this driver for platform_get_irq() Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191106163128.1980714-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-08dmaengine: dma-jz4780: add missed clk_disable_unprepare in removeChuhong Yuan
The remove misses to disable and unprepare jzdma->clk. Add a call to clk_disable_unprepare to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20191104161622.11758-1-hslester96@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-06dmaengine: JZ4780: Add support for the X1000.Zhou Yanjie
Add support for probing the dma-jz4780 driver on the X1000 Soc. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/1571937670-30828-3-git-send-email-zhouyanjie@zoho.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 23:28:14 +0000