summaryrefslogtreecommitdiff
path: root/drivers/dma/ste_dma40_ll.h
AgeCommit message (Collapse)Author
2013-01-14dmaengine: ste_dma40: support more than 128 event linesTong Liu
U8540 DMA controller is different from u9540 we need define new registers and use them to support handling more than 128 event lines. Signed-off-by: Tong Liu <tong.liu@stericsson.com> Reviewed-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2012-09-01dma: fix commentsMasanari Iida
Correct spelling typo in drivers/dma. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23dma40: Improve the logic of stopping logical chanNarayanan G
can be directly stopped by issuing a SUSPEND_REQ on the EE bits. There is no need to suspend the physical channel and restart it. Also, the support for pre-V2 hw is discontinued. EE bits for writing: 00: disable only if AS=11 or AS=00 01: enable 10: suspend_req only if AS=01 & EE=01 or EE=11 11: round / no change for writing Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-22dmaengine/ste_dma40: support pm in dma40Narayanan G
This patch adds power management support to the dma40 driver. The DMA registers are backed up and restored, during suspend/resume. Also flags to track the dma usage have been introduced to facilitate this. Patch also includes few other minor changes, related to formatting, comments. Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-07-14dmaengine/ste_dma40: use AMBA PrimeCell helper macrosLinus Walleij
The DMA40 is not a PrimeCell from ARM, but it still use the same ID registers. So let's utilize the existing macros in the PrimeCell header to identify manufacturer and revision of the IP block instead of reinventing the wheel. Cc: Robert Marklund <robert.marklund@stericsson.com> Cc: Per Forlin <per.forlin@linaro.org> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-01-30dma40: cyclic xfer supportRabin Vincent
Support cyclic transfers, which are useful for ALSA drivers. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: use flags to reduce parameter countRabin Vincent
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: make d40_log_buf_to_lli staticRabin Vincent
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: pass the info pointer all the way to reduce argument countRabin Vincent
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: unify d40_log_sg_to_lli funcs for mem and slaveRabin Vincent
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: move lli_load to main source fileRabin Vincent
These register writes are better placed in the main source file rather than ll.c. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: implement prep_memcpy as a wrapper around memcpy_sgRabin Vincent
To simplify the code. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: allow realtime and priority for event linesRabin Vincent
DB8500v2's DMA40 (revision 3) allows setting event lines as high priority and real time. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04dmaengine: dma40: Add support to split up large elementsPer Forlin
The maximum transfer size of the stedma40 is (64k-1) x data-width. If the transfer size of one element exceeds this limit the job is split up and sent as linked transfer. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move mode_opt to separate configRabin Vincent
Defaults are "basic mode" for physical channels, and "logical source logical destination" for logical channels. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: rewrote LCLA entries allocation codeJonas Aaberg
LLI allocation is now done on job level instead of channel level. Previously the maximum length of a linked job in hw on a logical channel was 8, since the LLIs where evenly divided. Now only executing jobs have allocated LLIs which increase the length to a maximum of 64 links in HW. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: code clean-upJonas Aaberg
This patch includes non functional code clean up changes, file header updates and a few magic numbers got defined. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: added support for link jobs in hwJonas Aaberg
If a new job is added on a physical channel that already has a job, the new job is linked in hw to the old job instead of queueing up the jobs. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: removed a few magic numbersJonas Aaberg
Make sure to extract the revision field explicitly and document what bits are being accessed here without magic numbers. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: fix bug related to callback handlingJonas Aaberg
The callback got called even when it was not supposed to. Also removed some not needed interrupt trigger on/off code. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: allocate LCLA dynamicallyLinus Walleij
Switch to allocating LCLA in memory instead of having a fixed address. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: only write phy channel config first timeLinus Walleij
We only need to write the configuration to a physical channel if it is free, else it is already written. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-04-14DMAENGINE: Support for ST-Ericssons DMA40 block v3Linus Walleij
This is a straightforward driver for the ST-Ericsson DMA40 DMA controller found in U8500, implemented akin to the existing COH 901 318 driver. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com> Cc: STEricsson_nomadik_linux@list.st.com Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 03:00:52 +0000