Age | Commit message (Collapse) | Author |
|
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here). This fixes
compile warning (!CONFIG_OF on x86_64):
drivers/dma/sf-pdma/sf-pdma.c:576:34: warning:
‘sf_pdma_dt_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162303.482126-4-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20201027215252.25820-4-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20201006050458.221329-1-allen.lkml@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
'desc' variable is now defined but not used in sf_pdma_donebh_tasklet(),
causing this warning:
drivers/dma/sf-pdma/sf-pdma.c: In function 'sf_pdma_donebh_tasklet':
drivers/dma/sf-pdma/sf-pdma.c:287:23: warning: unused variable 'desc' [-Wunused-variable]
Remove this unused variable
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200914055302.22962-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Because a callback is called twice when DMA transfer complete
the second callback may be possible to access a freed memory
if the first callback routines perform the dma_release_channel function.
So this patch serialized the callback functions
Signed-off-by: Brad Kim <brad.kim@semifive.com>
Tested-and-reviewed-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Brad Kim <brad.kim@sifive.com>
Link: https://lore.kernel.org/r/20200903111726.3413-1-brad.kim@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The header file linux/uio.h includes crypto/hash.h which pulls in
most of the Crypto API. Since linux/uio.h is used throughout the
kernel this means that every tiny bit of change to the Crypto API
causes the entire kernel to get rebuilt.
This patch fixes this by moving it into lib/iov_iter.c instead
where it is actually used.
This patch also fixes the ifdef to use CRYPTO_HASH instead of just
CRYPTO which does not guarantee the existence of ahash.
Unfortunately a number of drivers were relying on linux/uio.h to
provide access to linux/slab.h. This patch adds inclusions of
linux/slab.h as detected by build failures.
Also skbuff.h was relying on this to provide a declaration for
ahash_request. This patch adds a forward declaration instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
There is no need to explicitly free memory that have been 'devm_kzalloc'ed.
Simplify the probe function accordingly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20200501100824.126534-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Originally freeing descriptors was split into a locked and an unlocked
part. The locked part in vchan_get_all_descriptors() collected all
descriptors on a separate list_head. This was done to allow iterating
over that new list in vchan_dma_desc_free_list() without a lock held.
This became broken in 13bb26ae8850 ("dmaengine: virt-dma: don't always
free descriptor upon completion"). With this commit
vchan_dma_desc_free_list() no longer exclusively operates on the
separate list, but starts to put descriptors which can be reused back on
&vc->desc_allocated. This list operation should have been locked, but
wasn't.
In the mean time drivers started to call vchan_dma_desc_free_list() with
their lock held so that we now have the situation that
vchan_dma_desc_free_list() is called locked from some drivers and
unlocked from others.
To clean this up we have to do two things:
1. Add missing locking in vchan_dma_desc_free_list()
2. Make sure drivers call vchan_dma_desc_free_list() unlocked
This needs to be done atomically, so in this patch the locking is added
and all drivers are fixed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Green Wan <green.wan@sifive.com>
Tested-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20191216105328.15198-3-s.hauer@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The place where the macro, SF_PDMA_REG_BASE(), is cause kernel-doc
using wrong function declaration. Move it to header file.
Signed-off-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20191118143554.16129-2-green.wan@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are several comments starting from "/**" but not for function
comment purpose. It causes kernel-doc parsing wrong string. Replace
"/**" with "/*" to fix them.
Signed-off-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20191118143554.16129-1-green.wan@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add PDMA driver, sf-pdma, to enable DMA engine on HiFive Unleashed
Rev A00 board.
- Implement dmaengine APIs, support MEM_TO_MEM async copy.
- Tested by DMA Test client
- Supports 4 channels DMA, each channel has 1 done and 1 err
interrupt connected to platform-level interrupt controller (PLIC).
- Depends on DMA_ENGINE and DMA_VIRTUAL_CHANNELS
The datasheet is here:
https://static.dev.sifive.com/FU540-C000-v1.0.pdf
Follow the DMAengine controller doc,
"./Documentation/driver-api/dmaengine/provider.rst" to implement DMA
engine. And use the dma test client in doc,
"./Documentation/driver-api/dmaengine/dmatest.rst", to test.
Each DMA channel has separate HW regs and support done and error ISRs.
4 channels share 1 done and 1 err ISRs. There's no expander/arbitrator
in DMA HW.
------ ------
| |--< done 23 >--|ch 0|
| |--< err 24 >--| | (dma0chan0)
| | ------
| | ------
| |--< done 25 >--|ch 1|
| |--< err 26 >--| | (dma0chan1)
|PLIC| ------
| | ------
| |--< done 27 >--|ch 2|
| |--< err 28 >--| | (dma0chan2)
| | ------
| | ------
| |--< done 29 >--|ch 3|
| |--< err 30 >--| | (dma0chan3)
------ ------
Signed-off-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20191107084955.7580-4-green.wan@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|