summaryrefslogtreecommitdiff
path: root/drivers/dma/mv_xor.c
AgeCommit message (Collapse)Author
2020-09-18dmaengine: mv_xor: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200831103542.305571-17-allen.lkml@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-12Merge branch 'topic/mv' into for-linusVinod Koul
2019-02-19dmaengine: mv_xor: Use correct device for DMA APIRobin Murphy
Using dma_dev->dev for mappings before it's assigned with the correct device is unlikely to work as expected, and with future dma-direct changes, passing a NULL device may end up crashing entirely. I don't know enough about this hardware or the mv_xor_prep_dma_interrupt() operation to implement the appropriate error-handling logic that would have revealed those dma_map_single() calls failing on arm64 for as long as the driver has been enabled there, but moving the assignment earlier will at least make the current code operate as intended. Fixes: 22843545b200 ("dma: mv_xor: Add support for DMA_INTERRUPT") Reported-by: John David Anglin <dave.anglin@bell.net> Tested-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-01-07dmaengine: mv_xor: Fix a missing check in mv_xor_channel_addAditya Pakki
dma_async_device_register() may fail and return an error. The capabilities checked in mv_xor_channel_add() are not complete. The fix handles the error by freeing the resources. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-09-03dmaengine: mv_xor: move spin_lock_bh to spin_lock in taskletBarry Song
as you are already in a tasklet, it is unnecessary to call spin_lock_bh. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2017-08-22dmaengine: remove DMA_SG as it is dead code in kernelDave Jiang
There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-04-24dmaengine: mv_xor: use offset_in_page() macroGeliang Tang
Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-14dmaengine: mv_xor: remove redundant null check on cdColin Ian King
The check to see if cd is null is redundant, pdata->channels is never null at this point, and hence &pdata->channels[i] cannot be null, so remove the null check. Detected by CoverityScan, CID#1357194 ("Logically Dead Code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-25dmaengine: mv_xor: use builtin_platform_driverGeliang Tang
Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-25dmaengine: mv_xor: Add support for scatter-gather DMA modeStefan Roese
This patch adds memory to memory scatter-gather support to the Marvell mv_or DMA driver. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Marcin Wojtas <mw@semihalf.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-03Merge branch 'topic/unmap_cleanup' into for-linusVinod Koul
2016-10-03Merge branch 'topic/mv_xor' into for-linusVinod Koul
2016-09-15dmaengine: mv_xor: Add support for IO (PCIe) src/dst areasStefan Roese
To enable the access to a specific area, the MVEBU XOR controllers needs to have this area enabled / mapped via an address window. Right now, only the DRAM memory area is enabled via such memory windows. So using this driver to DMA to / from a e.g. PCIe memory region is currently not supported. This patch now adds support for such PCIe / IO regions by checking if the src / dst address is located in an IO memory area in contrast to being located in DRAM. This is done by using the newly introduced MBus function mvebu_mbus_get_io_win_info(). If the src / dst address is located in such an IO area, a new address window is created in the XOR DMA controller. Enabling the controller to access this area. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Marcin Wojtas <mw@semihalf.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: mv_xor: move unmap to before callbackDave Jiang
Completion callback should happen after dma_descriptor_unmap() has happened. This allow the cache invalidate to happen and ensure that the data accessed by the upper layer is in memory that was from DMA rather than stale data. On some architecture this is done by the hardware, however we should make the code consistent to not cause confusion. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: mv_xor: convert callback to helper functionDave Jiang
This is in preperation of moving to a callback that provides results to the callback for the transaction. The conversion will maintain current behavior and the driver must convert to new callback mechanism at a later time in order to receive results. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-07-28Merge tag 'dmaengine-4.8-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time we have bit of largish changes: two new drivers, bunch of updates and cleanups to existing set. Nothing super exciting though. New drivers: - Xilinx zynqmp dma engine driver - Marvell xor2 driver Updates: - dmatest sg support - updates and enhancements to Xilinx drivers, adding of cyclic mode - clock handling fixes across drivers - removal of OOM messages on kzalloc across subsystem - interleaved transfers support in omap driver - runtime pm support in qcom bam dma - tasklet kill freeup across drivers - irq cleanup on remove across drivers" * tag 'dmaengine-4.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits) dmaengine: k3dma: add missing clk_disable_unprepare() on error in k3_dma_probe() dmaengine: zynqmp_dma: add missing MODULE_LICENSE dmaengine: qcom_hidma: use for_each_matching_node() macro dmaengine: zynqmp_dma: Fix static checker warning dmaengine: omap-dma: Support for interleaved transfer dmaengine: ioat: statify symbol dmaengine: pxa_dma: implement device_synchronize dmaengine: imx-sdma: remove assignment never used dmaengine: imx-sdma: remove dummy assignment dmaengine: cppi: remove unused and bogus check dmaengine: qcom_hidma_lli: kill the tasklets upon exit dmaengine: pxa_dma: remove owner assignment dmaengine: fsl_raid: remove owner assignment dmaengine: coh901318: remove owner assignment dmaengine: qcom_hidma: kill the tasklets upon exit dmaengine: txx9dmac: explicitly freeup irq dmaengine: sirf-dma: kill the tasklets upon exit dmaengine: s3c24xx: kill the tasklets upon exit dmaengine: s3c24xx: explicitly freeup irq dmaengine: pl330: explicitly freeup irq ...
2016-06-07dmaengine: mv_xor: Fix incorrect offset in dma_map_page()Stefan Roese
Upon booting, I occasionally spotted some BUGs triggered by the internal DMA test routine executed upon driver probing. This was detected by SLUB_DEBUG ("Freechain corrupt" or "Redzone overwritten"). Tracking this down located a problem in passing 0 as offset in dma_map_page(). As kmalloc, especially when used with SLUB_DEBUG, may return a non page aligned address. This patch fixes this issue by passing the correct offset in dma_map_page(). Tested on a custom Armada XP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-07dmaengine: mv_xor: Minor coding style fixStefan Roese
Remove the space before the "err_free_dma:" label in mv_xor_channel_add(). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-03dmaengine: mv_xor: add support for Armada 3700 SoCMarcin Wojtas
Armada 3700 SoC comprise a single XOR engine compliant with the ones used in older Marvell SoC's like Armada XP or 38x. The only thing that needs modification is the Mbus configuration, which has to be done on two levels: global and in device. The first one is inherited from the bootloader. The latter can be opened in a default way, leaving arbitration to the bus controller. Hence filled mbus_dram_target_info structure is not needed. Patch "dmaengine: mv_xor: optimize performance by using a subset of the XOR channels" introduced limitation for using XOR engines and channels vs number of available CPU's. Those constraints do not however fit Armada 3700 architecture with two possible CPU's and single, dual-channel engine. Hence in this commit an adjustment for setting maximum available channels is added. This patch enables XOR access to DRAM by opening default window to 4GB space with specific attribute. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-03dmaengine: mv_xor: use SoC type instead of directly the operation modeGregory CLEMENT
Currently the main difference between legacy XOR engine and newer one, is the way the engine modes are setup (either in the descriptor or through the controller registers). In order to be able to take into account new generation of the XOR engine for the ARM64 SoC, we need to identify them by type, and then depending to the type the engine setup will be selected. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-03dmaengine: mv_xor: make the code 64 bits compliantGregory CLEMENT
Fix two warnings which appear when building for 64 bits target: drivers/dma/mv_xor.c: In function ‘mv_xor_prep_dma_xor’: drivers/dma/mv_xor.c:480:3: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 6 has type ‘size_t {aka long unsigned int}’ [-Wformat=] "%s src_cnt: %d len: %u dest %pad flags: %ld\n", ^ drivers/dma/mv_xor.c: In function ‘mv_xor_probe’: drivers/dma/mv_xor.c:1223:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] op_in_desc = (int)of_id->data; ^ Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-09dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()Luis R. Rodriguez
Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: daniel.vetter@ffwll.ch Cc: dhowells@redhat.com Cc: julia.lawall@lip6.fr Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@amacapital.net Cc: mst@redhat.com Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-06dmaengine: mv_xor: add suspend/resume supportThomas Petazzoni
This commit adds suspend/resume support to the mv_xor driver. The config and interrupt mask registers must be saved and restored, and upon resume, the MBus windows configuration must also be done again. Tested on Armada 388 GP, with a RAID 5 array, accessed before and after a suspend to RAM cycle. Based on work from Ofer Heifetz and Lior Amsalem. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-06dmaengine: mv_xor: de-duplicate mv_chan_set_mode*()Thomas Petazzoni
When commit 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x command in descriptor mode") added support for the descriptor mode available in Marvell Armada 38x and later SoCs, it added a new function mv_chan_set_mode_to_desc() which allows to configure a XOR channel to get the specific operation to be done from each individual DMA descriptor. However, this function was mainly a duplicate of the existing mv_chan_set_mode(), with just the operation being different. This commit re-organizes the code into a single mv_chan_set_mode() function, which takes the operation mode as argument, and the mv_xor_channel_add() function decides whether to use XOR_OPERATION_MODE_IN_DESC or XOR_OPERATION_MODE_XOR. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-06dmaengine: mv_xor: remove mv_xor_chan->current_type fieldThomas Petazzoni
Since commit 3e4f52e2da9f6 ("dma: mv_xor: Simplify the DMA_MEMCPY operation"), this field is no longer used, so get rid of it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-04Merge tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time we have aded a new capability for scatter-gathered memset using dmaengine APIs. This is supported in xdmac & hdmac drivers We have added support for reusing descriptors for examples like video buffers etc. Driver will follow The behaviour of descriptor ack has been clarified and documented New devices added are: - dma controller in sun[457]i SoCs - lpc18xx dmamux - ZTE ZX296702 dma controller - Analog Devices AXI-DMAC DMA controller - eDMA support for dma-crossbar - imx6sx support in imx-sdma driver - imx-sdma device to device support Other: - jz4780 fixes - ioatdma large refactor and cleanup for removal of ioat v1 and v2 which is deprecated and fixes - ACPI support in X-Gene DMA engine driver - ipu irq fixes - mvxor fixes - minor fixes spread thru drivers" [ The Kconfig and Makefile entries got re-sorted alphabetically, and I handled the conflict with the new Intel integrated IDMA driver by slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in order to keep the Intel entries together. I think it might be a good idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make the sorting be a true sort, not this mismash. Also, this merge disables the COMPILE_TEST for the sun4i DMA controller, because it does not compile cleanly at all. - Linus ] * tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits) dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs dmaengine :ipu: change ipu_irq_handler() to remove compile warning dmaengine: ioatdma: Fix variable array length dmaengine: ioatdma: fix sparse "error" with prep lock dmaengine: hdmac: Add memset capabilities dmaengine: sort the sh Makefile dmaengine: sort the sh Kconfig dmaengine: sort the dw Kconfig dmaengine: sort the Kconfig dmaengine: sort the makefile drivers/dma: make mv_xor.c driver explicitly non-modular dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller devicetree: Add bindings documentation for Analog Devices AXI-DMAC dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests dmaengine: ioatdma: fix coccinelle warning dmaengine: ioatdma: fix zero day warning on incompatible pointer type dmaengine: tegra-apb: Simplify locking for device using global pause dmaengine: tegra-apb: Remove unnecessary return statements and variables dmaengine: tegra-apb: Avoid unnecessary channel base address calculation dmaengine: tegra-apb: Remove unused variables ...
2015-08-23drivers/dma: make mv_xor.c driver explicitly non-modularPaul Gortmaker
The Kconfig for this driver is currently: config MV_XOR bool "Marvell XOR engine support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We leave some tags like MODULE_AUTHOR for documentation purposes. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: dmaengine@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-19dmaengine: mv_xor: optimize performance by using a subset of the XOR channelsThomas Petazzoni
Due to how async_tx behaves internally, having more XOR channels than CPUs is actually hurting performance more than it improves it, because memcpy requests get scheduled on a different channel than the XOR requests, but async_tx will still wait for the completion of the memcpy requests before scheduling the XOR requests. It is in fact more efficient to have at most one channel per CPU, which this patch implements by limiting the number of channels per engine, and the number of engines registered depending on the number of availables CPUs. Marvell platforms are currently available in one CPU, two CPUs and four CPUs configurations: - in the configurations with one CPU, only one channel from one engine is used. - in the configurations with two CPUs, only one channel from each engine is used (they are two XOR engines) - in the configurations with four CPUs, both channels of both engines are used. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-19dmaengine: mv_xor: remove support for dmacap,* DT propertiesThomas Petazzoni
The only reason why we had dmacap,* properties is because back when DMA_MEMSET was supported, only one out of the two channels per engine could do a memset operation. But this is something that the driver already knows anyway, and since then, the DMA_MEMSET support has been removed. The driver is already well aware of what each channel supports and the one to one mapping between Linux specific implementation details (such as dmacap,interrupt enabling DMA_INTERRUPT) and DT properties is a good indication that these DT properties are wrong. Therefore, this commit simply gets rid of these dmacap,* properties, they are now ignored, and the driver is responsible for knowing the capabilities of the hardware with regard to the dmaengine subsystem expectations. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-07-31dmaengine: mv_xor: fix big endian operation in register modeThomas Petazzoni
Commit 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x command in descriptor mode") introduced the support for a feature that appeared in Armada 38x: specifying the operation to be performed in a per-descriptor basis rather than globally per channel. However, when doing so, it changed the function mv_chan_set_mode() to use: if (IS_ENABLED(__BIG_ENDIAN)) instead of: #if defined(__BIG_ENDIAN) While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not for other symbols such as __BIG_ENDIAN that is provided directly by the compiler. Consequently, the commit broke support for big-endian, as the XOR_DESCRIPTOR_SWAP flag was not set in the XOR channel configuration register. The primarily visible effect was some nasty warnings and failures appearing during the self-test of the XOR unit: [ 1.197368] mv_xor d0060900.xor: error on chan 0. intr cause 0x00000082 [ 1.197393] mv_xor d0060900.xor: config 0x00008440 [ 1.197410] mv_xor d0060900.xor: activation 0x00000000 [ 1.197427] mv_xor d0060900.xor: intr cause 0x00000082 [ 1.197443] mv_xor d0060900.xor: intr mask 0x000003f7 [ 1.197460] mv_xor d0060900.xor: error cause 0x00000000 [ 1.197477] mv_xor d0060900.xor: error addr 0x00000000 [ 1.197491] ------------[ cut here ]------------ [ 1.197513] WARNING: CPU: 0 PID: 1 at ../drivers/dma/mv_xor.c:664 mv_xor_interrupt_handler+0x14c/0x170() See also: http://storage.kernelci.org/next/next-20150617/arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y/lab-khilman/boot-armada-xp-openblocks-ax3-4.txt Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 6f166312c6ea2 ("dmaengine: mv_xor: add support for a38x command in descriptor mode") Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10dmaengine: mv_xor: improve descriptors list handling and reduce lockingLior Amsalem
This patch change the way free descriptors are marked. Instead of having a field for descriptor in use, all the descriptors in the all_slots list are free for use. This simplify the allocation method and reduce the locking needed. Signed-off-by: Lior Amsalem <alior@marvell.com> Reviewed-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10dmaengine: mv_xor: add support for a38x command in descriptor modeLior Amsalem
The Marvell Armada 38x SoC introduce new features to the XOR engine, especially the fact that the engine mode (MEMCPY/XOR/PQ/etc) can be part of the descriptor and not set through the controller registers. This new feature allows mixing of different commands (even PQ) on the same channel/chain without the need to stop the engine to reconfigure the engine mode. Refactor the driver to be able to use that new feature on the Armada 38x, while keeping the old behaviour on the older SoCs. Signed-off-by: Lior Amsalem <alior@marvell.com> Reviewed-by: Ofer Heifetz <oferh@marvell.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10dmaengine: mv_xor: Rename function for consistent namingMaxime Ripard
The current function names isn't very consistent, and functions with the same prefix might operate on either a channel or a descriptor, which is kind of confusing. Rename these functions to have a consistent and clearer naming scheme. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-06-10dmaengine: mv_xor: bug fix for racing condition in descriptors cleanupLior Amsalem
This patch fixes a bug in the XOR driver where the cleanup function can be called and free descriptors that never been processed by the engine (which result in data errors). The cleanup function will free descriptors based on the ownership bit in the descriptors. Fixes: ff7b04796d98 ("dmaengine: DMA engine driver for Marvell XOR engine") Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Ofer Heifetz <oferh@marvell.com> Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18dmaengine: constify of_device_id arrayFabian Frederick
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16dmaengine: Remove FSF mailing addressesJarkko Nikula
Free Software Foundation mailing address has been moved in the past and some of the addresses here are outdated. Remove them from file headers since the COPYING file in the kernel sources includes it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: mv_xor: Remove device_controlMaxime Ripard
The Marvell XOR engine doesn't allow any operations that use to be defined in device_control, it shouldn't need to be defined. Since it's going to be deprecated, remove it altogether. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-20dma: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...
2014-10-07Merge tag 'dmaengine-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine updates from Dan Williams: "Even though this has fixes marked for -stable, given the size and the needed conflict resolutions this is 3.18-rc1/merge-window material. These patches have been languishing in my tree for a long while. The fact that I do not have the time to do proper/prompt maintenance of this tree is a primary factor in the decision to step down as dmaengine maintainer. That and the fact that the bulk of drivers/dma/ activity is going through Vinod these days. The net_dma removal has not been in -next. It has developed simple conflicts against mainline and net-next (for-3.18). Continuing thanks to Vinod for staying on top of drivers/dma/. Summary: 1/ Step down as dmaengine maintainer see commit 08223d80df38 "dmaengine maintainer update" 2/ Removal of net_dma, as it has been marked 'broken' since 3.13 (commit 77873803363c "net_dma: mark broken"), without reports of performance regression. 3/ Miscellaneous fixes" * tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: net: make tcp_cleanup_rbuf private net_dma: revert 'copied_early' net_dma: simple removal dmaengine maintainer update dmatest: prevent memory leakage on error path in thread ioat: Use time_before_jiffies() dmaengine: fix xor sources continuation dma: mv_xor: Rename __mv_xor_slot_cleanup() to mv_xor_slot_cleanup() dma: mv_xor: Remove all callers of mv_xor_slot_cleanup() dma: mv_xor: Remove unneeded mv_xor_clean_completed_slots() call ioat: Use pci_enable_msix_exact() instead of pci_enable_msix() drivers: dma: Include appropriate header file in dca.c drivers: dma: Mark functions as static in dma_v3.c dma: mv_xor: Add DMA API error checks ioat/dca: Use dev_is_pci() to check whether it is pci device
2014-09-23dma: mv_xor: Add support for DMA_INTERRUPTLior Amsalem
The driver is capable of supporting DMA_INTERRUPT by issuing a dummy 128-byte transfer. This helps removing a poll in the async_tx stack, replacing it with a completion interrupt. Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23dma: mv_xor: Remove dead codeEzequiel Garcia
The driver currently defines the USE_TIMER macro, but the timer-feature is never used in the code. The XOR and CRC32 results are never used. The 'unmap_xxx' fields are no longer needed, they were made obsolete in commit: 54f8d501e842 dmaengine: remove DMA unmap from drivers. Let's remove all this dead code. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23dma: mv_xor: Reduce interrupts by enabling EOD only when neededLior Amsalem
This commit unmasks the end-of-chain interrupt and removes the end-of-descriptor command setting on all transactions, except those explicitly flagged with DMA_PREP_INTERRUPT. This allows to raise an interrupt only on chain completion, instead of on each descriptor completion, which reduces interrupt count. Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23dma: mv_xor: Remove all interrupt magic numbersEzequiel Garcia
This commit replaces the current magic numbers in the interrupt handling with proper macros, which makes more readable and self-documenting. While here replace the BUG() with a noisy WARN_ON(). There's no reason to tear down the entire system for an DMA IRQ error. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23dma: mv_xor: Remove multi-slot supportLior Amsalem
Although the driver supported multiple-slot allocation, only one slot was ever allocated for each transaction. So, given we have no users of the multi-slot support, we can remove it and greatly simplify the code. Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23dma: mv_xor: Simplify the DMA_MEMCPY operationLior Amsalem
A memory copy operation can be expressed as an XOR operation with one source. This commit removes code duplication in the driver by reusing the XOR operation for the MEMCPY. As an added benefit, we can now put MEMCPY and XOR descriptors on the same chain, which improves performance. Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-23dma: mv_xor: Replace printk with dev_infoEzequiel Garcia
This commit replaces a printk(KERN_INFO ...) call with a dev_info() call, which is prefered for drivers. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 22:08:09 +0000