summaryrefslogtreecommitdiff
path: root/drivers/dma/fsldma.c
AgeCommit message (Collapse)Author
2017-08-22dmaengine: remove DMA_SG as it is dead code in kernelDave Jiang
There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-06-22dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctlyThomas Breitung
The bits of BWC, DAHTS and SAHTS in the DMA mode register must be cleared before a new value can be or-ed in. Signed-off-by: Thomas Breitung <thomas.breitung@izt-labs.de> Signed-off-by: Wolfgang Ocker <weo@reccoware.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-03Merge branch 'topic/unmap_cleanup' into for-linusVinod Koul
2016-10-03Merge branch 'topic/err_reporting' into for-linusVinod Koul
Signed-off-by: Vinod Koul <vinod.koul@intel.com> Conflicts: drivers/dma/cppi41.c
2016-09-30dmaengine: fsldma: Unmap region obtained by of_iomapArvind Yadav
Free memory mapping, if probe is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-14dmaengine: NO_IRQ removal from powerpc-only driversMichael Ellerman
We'd like to eventually remove NO_IRQ on powerpc, so remove usages of it from powerpc-only drivers. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: fsldma: move unmap to before callbackDave Jiang
Completion callback should happen after dma_descriptor_unmap() has happened. This allow the cache invalidate to happen and ensure that the data accessed by the upper layer is in memory that was from DMA rather than stale data. On some architecture this is done by the hardware, however we should make the code consistent to not cause confusion. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-08dmaengine: fsldma: convert callback to helper functionDave Jiang
This is in preperation of moving to a callback that provides results to the callback for the transaction. The conversion will maintain current behavior and the driver must convert to new callback mechanism at a later time in order to receive results. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-21dmaengine: Remove site specific OOM error messages on kzallocPeter Griffin
If kzalloc() fails it will issue it's own error message including a dump_stack(). So remove the site specific error messages. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-03dmaengine: fsldma: Use dma_pool_zallocJulia Lawall
Dma_pool_zalloc combines dma_pool_alloc and memset 0. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression d,e; statement S; @@ d = - dma_pool_alloc + dma_pool_zalloc (...); if (!d) S - memset(d, 0, sizeof(*d)); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-03-09dmaengine: fsldma: fix memory leakXuelin Shi
adding unmap of sources and destinations while doing dequeue. Signed-off-by: Xuelin Shi <xuelin.shi@nxp.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-01dmaengine: fsldma: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13dmaengine: fsldma: remove the unused variableKevin Hao
Fix the following build warning: drivers/dma/fsldma.c: In function 'fsl_dma_device_terminate_all': drivers/dma/fsldma.c:947:6: warning: unused variable 'size' [-Wunused-variable] Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-13dmaengine: fsldma: declare slave capabilities for the generic codeKevin Hao
Since commit ecc19d17868b ("dmaengine: Add a warning for drivers not using the generic slave caps retrieval"), the dma drivers are required to fill the caps infos in order to support generic slaves caps retrieval. Otherwise we will get a warning like this: WARNING: at drivers/dma/dmaengine.c:830 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.19.0-rc2-next-20150106-dirty #271 task: c0000001f70a0000 ti: c0000001f7044000 task.ti: c0000001f7044000 NIP: c00000000032b238 LR: c00000000032b234 CTR: c00000000001d258 REGS: c0000001f7047330 TRAP: 0700 Tainted: G W (3.19.0-rc2-next-20150106-dirty) MSR: 0000000080029000 <CE,EE,ME> CR: 24adbe22 XER: 20000000 SOFTE: 1 GPR00: c00000000032b234 c0000001f70475b0 c0000000009b4848 0000000000000040 GPR04: 0000000000000001 0000000000000001 0000000000000000 000000000000000f GPR08: 0000000000000000 c000000000902988 c000000000902988 00000000000052c8 GPR12: 0000000024adbe22 c00000000fff4000 c000000000002038 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 0000000000000000 c000000000972dc8 c0000000007e6fd0 GPR28: c0000001f76d1d30 c0000001f76d1c10 c0000001f76d1c00 0000000000000000 NIP [c00000000032b238] .dma_async_device_register+0x3f8/0x5b8 LR [c00000000032b234] .dma_async_device_register+0x3f4/0x5b8 Call Trace: [c0000001f70475b0] [c00000000032b234] .dma_async_device_register+0x3f4/0x5b8 (unreliable) [c0000001f70476a0] [c00000000032ca78] .fsldma_of_probe+0x298/0x438 [c0000001f7047750] [c00000000037080c] .platform_drv_probe+0x50/0x9c [c0000001f70477d0] [c00000000036e74c] .really_probe+0xa4/0x29c [c0000001f7047870] [c00000000036eae4] .__driver_attach+0x100/0x104 [c0000001f7047900] [c00000000036c1f0] .bus_for_each_dev+0x84/0xe4 [c0000001f70479a0] [c00000000036e164] .driver_attach+0x24/0x38 [c0000001f7047a10] [c00000000036dcc8] .bus_add_driver+0x1c8/0x2ac [c0000001f7047ab0] [c00000000036f14c] .driver_register+0x8c/0x158 [c0000001f7047b30] [c0000000003707a8] .__platform_driver_register+0x6c/0x80 [c0000001f7047ba0] [c000000000898a3c] .fsldma_init+0x2c/0x40 [c0000001f7047c10] [c000000000001818] .do_one_initcall+0xb8/0x234 [c0000001f7047d00] [c000000000878e2c] .kernel_init_freeable+0x188/0x268 [c0000001f7047db0] [c000000000002054] .kernel_init+0x1c/0xfc8 [c0000001f7047e30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 7fb9f840 3bffffe0 409effac 7f54d378 48000060 813d0050 2f890000 40befdd0 3c62ffe3 38632450 482f0aa9 60000000 <0fe00000> 4bfffdb8 7f03c378 482ed465 Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: fsl-dma: Split device_controlMaxime Ripard
Split the device_control callback of the Freescale Elo DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. While we're at it, remove the useless prep_sg callback. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-06dmaengine: fsldma: Remove chancnt affectationsMaxime Ripard
chanctnt is already filled by dma_async_device_register, which uses the channel list to know how much channels there is. Since it's already filled, we can safely remove it from the drivers' probe function. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-20dma: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-15dmaengine: freescale: remove FSLDMA_EXTERNAL_START control methodVinod Koul
since users have been move to fsl_dma_external_start() API, so remove this now Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15dmaengine: freescale: add and export fsl_dma_external_start()Vinod Koul
The freescale driver uses custom device control FSLDMA_EXTERNAL_START to put the controller in external start mode. Since we are planning to deprecate the device control, move this to exported API. Subsequent patches will remove the FSLDMA_EXTERNAL_START Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-14dmaengine: Freescale: change descriptor release process for supporting async_txHongbo Zhang
Fix the potential risk when enable config NET_DMA and ASYNC_TX. Async_tx is lack of support in current release process of dma descriptor, all descriptors will be released whatever is acked or no-acked by async_tx, so there is a potential race condition when dma engine is uesd by others clients (e.g. when enable NET_DMA to offload TCP). In our case, a race condition which is raised when use both of talitos and dmaengine to offload xor is because napi scheduler will sync all pending requests in dma channels, it affects the process of raid operations due to ack_tx is not checked in fsl dma. The no-acked descriptor is freed which is submitted just now, as a dependent tx, this freed descriptor trigger BUG_ON(async_tx_test_ack(depend_tx)) in async_tx_submit(). TASK = ee1a94a0[1390] 'md0_raid5' THREAD: ecf40000 CPU: 0 GPR00: 00000001 ecf41ca0 ee44/921a94a0 0000003f 00000001 c00593e4 00000000 00000001 GPR08: 00000000 a7a7a7a7 00000001 045/920000002 42028042 100a38d4 ed576d98 00000000 GPR16: ed5a11b0 00000000 2b162000 00000200 046/920000000 2d555000 ed3015e8 c15a7aa0 GPR24: 00000000 c155fc40 00000000 ecb63220 ecf41d28 e47/92f640bb0 ef640c30 ecf41ca0 NIP [c02b048c] async_tx_submit+0x6c/0x2b4 LR [c02b068c] async_tx_submit+0x26c/0x2b4 Call Trace: [ecf41ca0] [c02b068c] async_tx_submit+0x26c/0x2b448/92 (unreliable) [ecf41cd0] [c02b0a4c] async_memcpy+0x240/0x25c [ecf41d20] [c0421064] async_copy_data+0xa0/0x17c [ecf41d70] [c0421cf4] __raid_run_ops+0x874/0xe10 [ecf41df0] [c0426ee4] handle_stripe+0x820/0x25e8 [ecf41e90] [c0429080] raid5d+0x3d4/0x5b4 [ecf41f40] [c04329b8] md_thread+0x138/0x16c [ecf41f90] [c008277c] kthread+0x8c/0x90 [ecf41ff0] [c0011630] kernel_thread+0x4c/0x68 Another modification in this patch is the change of completed descriptors, there is a potential risk which caused by exception interrupt, all descriptors in ld_running list are seemed completed when an interrupt raised, it works fine under normal condition, but if there is an exception occured, it cannot work as our excepted. Hardware should not be depend on s/w list, the right way is to read current descriptor address register to find the last completed descriptor. If an interrupt is raised by an error, all descriptors in ld_running should not be seemed finished, or these unfinished descriptors in ld_running will be released wrongly. A simple way to reproduce: Enable dmatest first, then insert some bad descriptors which can trigger Programming Error interrupts before the good descriptors. Last, the good descriptors will be freed before they are processsed because of the exception intrerrupt. Note: the bad descriptors are only for simulating an exception interrupt. This case can illustrate the potential risk in current fsl-dma very well. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Qiang Liu <qiang.liu@freescale.com> Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-14dmaengine: Freescale: add suspend resume functions for DMA driverHongbo Zhang
This patch adds suspend and resume functions for Freescale DMA driver. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-14dmaengine: Freescale: use spin_lock_bh instead of spin_lock_irqsaveHongbo Zhang
The usage of spin_lock_irqsave() is a stronger locking mechanism than is required throughout the driver. The minimum locking required should be used instead. Interrupts will be turned off and context will be saved, it is unnecessary to use irqsave. This patch changes all instances of spin_lock_irqsave() to spin_lock_bh(). All manipulation of protected fields is done using tasklet context or weaker, which makes spin_lock_bh() the correct choice. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Qiang Liu <qiang.liu@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: move functions to avoid forward declarationsHongbo Zhang
These functions will be modified in the next patch in the series. By moving the function in a patch separate from the changes, it will make review easier. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Qiang Liu <qiang.liu@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: add fsl_dma_free_descriptor() to reduce code duplicationHongbo Zhang
There are several places where descriptors are freed using identical code. This patch puts this code into a function to reduce code duplication. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Qiang Liu <qiang.liu@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: remove attribute DMA_INTERRUPT of dmaengineHongbo Zhang
Delete attribute DMA_INTERRUPT because fsldma doesn't support this function, exception will be thrown if talitos is used to offload xor at the same time. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Qiang Liu <qiang.liu@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: unify register access methodsHongbo Zhang
Methods of accessing DMA controller registers are inconsistent, some registers are accessed by DMA_IN/OUT directly, while others are accessed by functions get/set_* which are wrappers of DMA_IN/OUT, and even for the BCR register, it is read by get_bcr but written by DMA_OUT. This patch unifies the inconsistent methods, all registers are accessed by get/set_* now. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-02DMA: Freescale: remove the unnecessary FSL_DMA_LD_DEBUGHongbo Zhang
Some codes are calling chan_dbg with FSL_DMA_LD_DEBUG surrounded, it is really unnecessary to use such a macro because chan_dbg is a wrapper of dev_dbg, we do have corresponding DEBUG macro to switch on/off dev_dbg, and most of the other codes are also calling chan_dbg directly without using FSL_DMA_LD_DEBUG. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-12dma: fix fsldma build warningsDan Williams
drivers/dma/fsldma.c: In function 'fsldma_cleanup_descriptor': drivers/dma/fsldma.c:860:6: warning: unused variable 'len' [-Wunused-variable] drivers/dma/fsldma.c:859:13: warning: unused variable 'dst' [-Wunused-variable] drivers/dma/fsldma.c:858:13: warning: unused variable 'src' [-Wunused-variable] drivers/dma/fsldma.c:857:17: warning: unused variable 'dev' [-Wunused-variable] - due to unmap changes drivers/dma/fsldma.c: In function 'fsl_dma_tx_submit': drivers/dma/fsldma.c:428:2: warning: 'cookie' may be used uninitialized in this function [-Wuninitialized] - long standing warning Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-20Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-16Merge commit 'dmaengine-3.13-v2' of ↵Vinod Koul
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine changes from Dan 1/ Bartlomiej and Dan finalized a rework of the dma address unmap implementation. 2/ In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus for their review. 3/ Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. 4/ Some minor fixes / cleanups to mv_xor and ioatdma. Conflicts: drivers/dma/dmatest.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-14dmaengine: remove DMA unmap from driversBartlomiej Zolnierkiewicz
Remove support for DMA unmapping from drivers as it is no longer needed (DMA core code is now handling it). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [djbw: fix up chan2parent() unused warning in drivers/dma/dw/core.c] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13dmaengine: prepare for generic 'unmap' dataDan Williams
Add a hook for a common dma unmap implementation to enable removal of the per driver custom unmap code. (A reworked version of Bartlomiej Zolnierkiewicz's patches to remove the custom callbacks and the size increase of dma_async_tx_descriptor for drivers that don't care about raid). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> [bzolnier: prepare pl330 driver for adding missing unmap while at it] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13DMA: Freescale: update driver to support 8-channel DMA engineHongbo Zhang
This patch adds support to 8-channel DMA engine, thus the driver works for both the new 8-channel and the legacy 4-channel DMA engines. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-09drivers: clean-up prom.h implicit includesRob Herring
Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-08-05fsldma: remove useless use of lockAndy Shevchenko
Accordingly to dma_cookie_status() description locking is not required. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: use platform_{get,set}_drvdata()Jingoo Han
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Also, unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2012-11-28dma: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Cc: Barry Song <baohua.song@csr.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-01dma: fix commentsMasanari Iida
Correct spelling typo in drivers/dma. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-21dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclicAlexandre Bounine
Add context parameter to device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to allow passing client/target specific information associated with the data transfer. Modify all affected DMA engine drivers. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: ensure all DMA engine drivers initialize their cookiesRussell King - ARM Linux
Ensure all DMA engine drivers initialize their cookies in the same way, so that they all behave in a similar fashion. This means their first issued cookie will be 2 rather than 1, and will increment to INT_MAX before returning 1 and starting over. In connection with this, Dan Williams said: > Russell King wrote: > > Secondly, some DMA engine drivers initialize the dma_chan cookie to 0, > > others to 1.  Is there a reason for this, or are these all buggy? > > I know that ioat and iop-adma expect 0 to mean "I have cleaned up this > descriptor and it is idle", and would break if zero was an in-flight > cookie value. The reserved usage of zero is an driver internal > concern, but I have no problem formalizing it as a reserved value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: consolidate tx_status functionsRussell King - ARM Linux
Now that we have the completed cookie in the dma_chan structure, we can consolidate the tx_status functions by providing a function to set the txstate structure and returning the DMA status. We also provide a separate helper to set the residue for cookies which are still in progress. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: provide a common function for completing a dma descriptorRussell King - ARM Linux
Provide a common function to do the cookie mechanics for completing a DMA descriptor. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: consolidate assignment of DMA cookiesRussell King - ARM Linux
Everyone deals with assigning DMA cookies in the same way (it's part of the API so they should be), so lets consolidate the common code into a helper function to avoid this duplication. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: add private header fileRussell King - ARM Linux
Add a local private header file to contain definitions and declarations which should only be used by DMA engine drivers. We also fix linux/dmaengine.h to use LINUX_DMAENGINE_H to guard against multiple inclusion. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: move last completed cookie into generic dma_chan structureRussell King - ARM Linux
Every DMA engine implementation declares a last completed dma cookie in their private dma channel structures. This is pointless, and forces driver specific code. Move this out into the common dma_chan structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-27dmaengine: move drivers to dma_transfer_directionVinod Koul
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves dma/drivers/* to use new enum Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Yong Wang <yong.y.wang@intel.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Cc: Boojin Kim <boojin.kim@samsung.com> Cc: Barry Song <Baohua.Song@csr.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-04-10dt/fsldma: fix build warning caused by of_platform_device changesIra W. Snyder
Commit 000061245a6797d542854106463b6b20fbdcb12e, "dt/powerpc: Eliminate users of of_platform_{,un}register_driver" forgot to convert the type of structure passed into platform_device_register() when it was converted from of_platform_device_register. Fix it. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-22Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (66 commits) avr32: at32ap700x: fix typo in DMA master configuration dmaengine/dmatest: Pass timeout via module params dma: let IMX_DMA depend on IMX_HAVE_DMA_V1 instead of an explicit list of SoCs fsldma: make halt behave nicely on all supported controllers fsldma: reduce locking during descriptor cleanup fsldma: support async_tx dependencies and automatic unmapping fsldma: fix controller lockups fsldma: minor codingstyle and consistency fixes fsldma: improve link descriptor debugging fsldma: use channel name in printk output fsldma: move related helper functions near each other dmatest: fix automatic buffer unmap type drivers, pch_dma: Fix warning when CONFIG_PM=n. dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize dw_dmac: Setting Default Burst length for transfers as 16. dw_dmac: Allow src/dst msize & flow controller to be configured at runtime dw_dmac: Changing type of src_master and dest_master to u8. dw_dmac: Pass Channel Priority from platform_data dw_dmac: Pass Channel Allocation Order from platform_data ...
2011-03-11fsldma: make halt behave nicely on all supported controllersIra Snyder
The original dma_halt() function set the CA (channel abort) bit on both the 83xx and 85xx controllers. This is incorrect on the 83xx, where this bit means TEM (transfer error mask) instead. The 83xx doesn't support channel abort, so we only do this operation on 85xx. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com>