summaryrefslogtreecommitdiff
path: root/drivers/dma/cppi41.c
AgeCommit message (Collapse)Author
2014-10-15dma: cppi41: Switch to using managed resource in probeKiran Padwal
This change uses managed resource APIs to allocate resources such as, mem, irq in order to simplify the driver unload or failure cases Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-01dma: cppi41: handle 0-length packetsDaniel Mack
When a 0-length packet is received on the bus, desc->pd0 yields 1, which confuses the driver's users. This information is clearly wrong and not in accordance to the datasheet, but it's been observed on an AM335x board, very reproducible. Fix this by looking at bit 19 in PD2 of the completed packet. This bit will tell us if a zero-length packet was received on a queue. If it's set, ignore the value in PD0 and report a total length of 0 instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-03-11dma: cppi41: start tear down only if channel is busyGeorge Cherian
Start the channel tear down only if the channel is busy, else just bail out. In some cases its seen that by the time the tear down is initiated the cppi completes the DMA, especially in ISOCH transfers. Signed-off-by: George Cherian <george.cherian@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20drivers/dma: fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-12dma: cppi41: return code > 0 of pm_runtime_get_sync() is not an errorSebastian Andrzej Siewior
Return code of pm_runtime_get_sync() > 0 is not an error and may happen. Noticed during rmmod & modprobe testing. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-12dma: cppi41: redo descriptor collection in abort caseSebastian Andrzej Siewior
Most of the logic here is try and error since what actually happens does not match the trm or I miss read it. My first assumption was that the queue on which the tear-down descriptor completes (their own complete queue vs "active descriptor" complete queue) depends on the transfer direction. This seems not to be true because I manage to trigger | WARN_ON(c->desc_phys != desc_phys); and the other few were fine means the tear-down descriptor was valid but on different queue. This patch changes the logic here to look on both queues for the descriptor. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-12dma: cppi41: use cppi41_pop_desc() where possibleDaniel Mack
Use cppi41_pop_desc() when appropriate instead of open-coding the same functionality again. That makes the code more readable. The function has to be moved some lines up for this change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-12dma: cppi41: restore more registersDaniel Mack
With active users over suspend/resume cycles, it turns out that more registers, in particular DMA_TDFDQ and RXHPCRA0, have to be restored on resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-25dmaengine: cppi41: use DMA_COMPLETE for dma completion statusVinod Koul
Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-07dma: cppi41: add support for suspend and resumeDaniel Mack
This patch adds support for suspend/resume functionality to the cppi41 DMA driver. The steps necessary to make the system resume properly were figured out by trial-and-error. The code as it stands now is the minimum that has to be done to put the musb host system on an AM33xx system into an operable state after resume. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-07dma: cppi41: add shortcut to &pdev->dev in cppi41_dma_probe()Daniel Mack
Makes the code more readable and compact. No functional change. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-07dma: cppi41: s/deinit_cpii41/deinit_cppi41/Daniel Mack
Fix a misspelled function name. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-07dma: cppi41: pass around device instead of platform_deviceDaniel Mack
Instead of passing around struct plafform_device, use struct device and save one level of dereferencing. This affects the following functions: * cppi41_add_chans * purge_descs * deinit_cpii41 * init_descs * init_cppi41 * cppi_glue_infos It's just a cosmetic cleanup that makes the code more readable. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-28dma: cppi41: off by one in desc_to_chan()Dan Carpenter
The test here should be ">=" instead of ">". The cdd->chan_busy[] array has "ALLOC_DECS_NUM" elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27dma: cpp41: enable pm_runtime during initSebastian Andrzej Siewior
With enabled pm_runtime in the kernel the device won't work because it is not "on" during the probe function. This patch enables the device via pm_runtime on probe so it remains activated. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-27dma: cpp41: make it compile with CONFIG_BUG=nSebastian Andrzej Siewior
Before Randy figures out that this does not compile with CONFIG_BUG=n here is a fix for it. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: musb dma: add cppi41 dma driverSebastian Andrzej Siewior
This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 06:50:13 +0000