summaryrefslogtreecommitdiff
path: root/drivers/dma/amba-pl08x.c
AgeCommit message (Collapse)Author
2017-12-04dmaengine: amba-pl08x: Use vchan_terminate_vdesc() instead of desc_freePeter Ujfalusi
To avoid race with vchan_complete, use the race free way to terminate running transfer. Implement the device_synchronize callback to make sure that the terminated descriptor is freed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-28dmaengine: pl08x: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-24dmaengine: pl08x: Add support for Faraday Technology FTDMAC020Linus Walleij
After reading the specs for the Faraday Technology FTDMAC020 found in the Gemini platform, it becomes pretty evident that this is just another PL08x derivative, and should be handled like such by simply extending the existing PL08x driver to handle the quirks in this hardware. This patch makes memcpy work and has been tested on the Gemini and also regression-tested on the Nomadik NHK15 using dmatest with 10 threads per channel without a hinch for hours. I have not implemented slave DMA in those codepaths, because this device (Gemini) does not use slave DMA, and it seems like devices using FTDMAC020 for device DMA have a slightly different register layout so some real hardware is needed to proceed with this. I left some FIXME etc in the code for this. I had to do some refactorings of some helper functions, but I have not split those into separate patches because these refactorings do not make much sense without the increased complexity of handling the FTDMAC020. The DMA test would hang the platform on me on the Gemini after a few thousand iterations, however after turning of the caches the problem immediately disappeared and I could run the DMA engine with 10 threads pers physical channel for days in a row without a crash. I think there is no problem with the DMA driver: instead it is something fishy in the FA526 cache handling code that get pretty heavily exercised by the DMA engine and we need to go and fix that instead. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-24dmaengine: pl08x: Make slave engine optionalLinus Walleij
If the vendor data does not specify any signals, we do not have to support slave DMA. Make the registration of the slave DMA engine optional, so we can use this for the FTDMAC020 in the Gemini that only has memcpy support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-24ARM/dmaengine: pl08x: pass reasonable memcpy settingsLinus Walleij
We cannot use bits from configuration registers as API between platforms and driver like this, abstract it out to two enums and mimic the stuff passed as device tree data. This is done to make it possible for the driver to generate the ccfg word on-the-fly so we can support more PL08x derivatives. Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-04dmaengine: pl08x: remove lock documentationVinod Koul
lock variable in pl08x_dma_chan_state no longer exists so remove it Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-04dmaengine: pl08x: fix pl08x_dma_chan_state documentationVinod Koul
Documentation for pl08x_dma_chan_state mentions it as struct whereas it is a enum, so fix that Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-04dmaengine: pl08x: Use the BIT() macro consistentlyLinus Walleij
This makes the driver shift bits with BIT() which is used on other places in the driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-04dmaengine: pl080: Fix some missing kerneldocLinus Walleij
Two elements of the physical channel description was missing. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-17dmaengine: pl08x: Add support for the DMA slave mapSylwester Nawrocki
This patch adds support for the new channel request API introduced in commit a8135d0d79e9d0ad3a4ff494fceeaae83 "dmaengine: core: Introduce new, universal API to request a channel". param field of struct dma_slave_map type entries in the platform data structure should be pointing to struct pl08x_channel_data of related DMA channel. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-21dmaengine: Remove site specific OOM error messages on kzallocPeter Griffin
If kzalloc() fails it will issue it's own error message including a dump_stack(). So remove the site specific error messages. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-05dmaengine: pl08x: allocate OF slave channel data at probe timeLinus Walleij
The current OF translation of channels can never work with any DMA client using the DMA channels directly: the only way to get the channels initialized properly is in the dma_async_device_register() call, where chan->dev etc is allocated and initialized. Allocate and initialize all possible DMA channels and only augment a target channel with the periph_buses at of_xlate(). Remove some const settings to make things work. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-18dmaengine: pl08x: support dt channel assignmentLinus Walleij
Add support for assigning DMA channels from a device tree. [je: remove channel sub-node parsing, dynamic channel creation on xlate] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-08dmaengine: pl08x: Suppress spaces in indentationLeonardo Carreras
Removed checkpatch reported spaces in indentation: ERROR: code indent should use tabs where possible +^I PL080_CONFIG_TC_IRQ_MASK);$ Signed-off-by: Leonardo Carreras <leocarreras89@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-24Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...
2015-03-18Merge branch 'topic/alloc_removal' into for-linusVinod Koul
2015-03-18dmaengine: amba-pl08x:remove device_alloc_chan_resources handlerVinod Koul
Now that device_alloc_chan_resources handler in not mandatory, remove dummy implementations Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18dmaengine: pl08x: Define capabilities for generic capabilities reportingMark Brown
Ensure that clients can automatically configure themselves and avoid a nasty warning at boot by providing capability information. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-16dmaengine: Remove FSF mailing addressesJarkko Nikula
Free Software Foundation mailing address has been moved in the past and some of the addresses here are outdated. Remove them from file headers since the COPYING file in the kernel sources includes it. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: pl08x: Split device_controlMaxime Ripard
Split the device_control callback of the AMBA PL08x DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06dmaengine: pl08x: Remove chancnt affectationsMaxime Ripard
chanctnt is already filled by dma_async_device_register, which uses the channel list to know how much channels there is. Since it's already filled, we can safely remove it from the drivers' probe function. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04dma: pl08x: Use correct specifier for size_t valuesMark Brown
When printing size_t values we should use the %zd or %zx format specifier in order to ensure the value is displayed correctly and avoid warnings from sparse. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04dmaengine: Remove the context argument to the prep_dma_cyclic operationLaurent Pinchart
The argument is always set to NULL and never used. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-28dma: pl08x: Export pl08x_filter_idSachin Kamat
Export the symbol so that it is accessible to modules. Fixes the following error: ERROR: "pl08x_filter_id" [sound/soc/samsung/snd-soc-s3c-dma.ko] undefined! Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-18dma: pl08x: allow zero slave channelsLinus Walleij
It might happen that a platform wants to use its DMA engine for memcpy only, and then we have zero slave channels to initialize, so allow the slave initialization to return zero. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-04Fix pl08x warningsRussell King - ARM Linux
drivers/dma/amba-pl08x.c: In function 'pl08x_desc_free': drivers/dma/amba-pl08x.c:1173:2: warning: passing argument 1 of 'dma_descriptor_unmap' from incompatible pointer type include/linux/dmaengine.h:476:91: note: expected 'struct dma_async_tx_descriptor *' but argument is of type 'struct pl08x_txd *' Fixes: d38a8c622a1b ("dmaengine: prepare for generic 'unmap' data") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-20Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-16Merge commit 'dmaengine-3.13-v2' of ↵Vinod Koul
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine changes from Dan 1/ Bartlomiej and Dan finalized a rework of the dma address unmap implementation. 2/ In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus for their review. 3/ Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. 4/ Some minor fixes / cleanups to mv_xor and ioatdma. Conflicts: drivers/dma/dmatest.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-14dmaengine: remove DMA unmap from driversBartlomiej Zolnierkiewicz
Remove support for DMA unmapping from drivers as it is no longer needed (DMA core code is now handling it). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [djbw: fix up chan2parent() unused warning in drivers/dma/dw/core.c] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-11-13dmaengine: prepare for generic 'unmap' dataDan Williams
Add a hook for a common dma unmap implementation to enable removal of the per driver custom unmap code. (A reworked version of Bartlomiej Zolnierkiewicz's patches to remove the custom callbacks and the size increase of dma_async_tx_descriptor for drivers that don't care about raid). Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> [bzolnier: prepare pl330 driver for adding missing unmap while at it] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-10-31DMA-API: dma: pl08x: add dma_set_mask_and_coherent() callRussell King
The DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL08x driver. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-25dmaengine: amba-pl08x: use DMA_COMPLETE for dma completion statusVinod Koul
Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-13dma: misc: remove deprecated IRQF_DISABLEDMichael Opdenacker
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-10Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine updates from Vinod Koul: "This pull brings: - Andy's DW driver updates - Guennadi's sh driver updates - Pl08x driver fixes from Tomasz & Alban - Improvements to mmp_pdma by Daniel - TI EDMA fixes by Joel - New drivers: - Hisilicon k3dma driver - Renesas rcar dma driver - New API for publishing slave driver capablities - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits) dma: edma: Remove limits on number of slots dma: edma: Leave linked to Null slot instead of DUMMY slot dma: edma: Find missed events and issue them ARM: edma: Add function to manually trigger an EDMA channel dma: edma: Write out and handle MAX_NR_SG at a given time dma: edma: Setup parameters to DMA MAX_NR_SG at a time dmaengine: pl330: use dma_set_max_seg_size to set the sg limit dmaengine: dma_slave_caps: remove sg entries dma: replace devm_request_and_ioremap by devm_ioremap_resource dma: ste_dma40: Fix potential null pointer dereference dma: ste_dma40: Remove duplicate const dma: imx-dma: Remove redundant NULL check dma: dmagengine: fix function names in comments dma: add driver for R-Car HPB-DMAC dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap() dma: imx-sdma: Staticize sdma_driver_data structures pch_dma: Add MODULE_DEVICE_TABLE dmaengine: PL08x: Add cyclic transfer support dmaengine: PL08x: Fix reading the byte count in cctl dmaengine: PL08x: Add support for different maximum transfer size ...
2013-09-02dmaengine: PL08x: Add cyclic transfer supportAlban Bedel
Many audio interface drivers require support of cyclic transfers to work correctly, for example Samsung ASoC DMA driver. This patch adds support for cyclic transfers to the amba-pl08x driver. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> [tfiga: Rebase and slightly beautify the original patch.] Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dmaengine: PL08x: Fix reading the byte count in cctlAlban Bedel
There are more fields than just SWIDTH in CH_CONTROL register, so read register value must be masked in addition to shifting. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dmaengine: PL08x: Add support for different maximum transfer sizeTomasz Figa
PL080S has separate register to store transfer size in, allowing single transfer to be much larger than in standard PL080. This patch makes the amba-pl08x driver aware of this and removes writing transfer size to reserved bits of CH_CONTROL register on PL080S, which was not a problem witn transfer sizes fitting the original bitfield of PL080, but now would overwrite other fields. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dmaengine: PL08x: Add support for PL080S variantTomasz Figa
PL080S is a modified version of PL080 that can be found on Samsung SoCs, such as S3C6400 and S3C6410. It has different offset of CONFIG register, separate CONTROL1 register that holds transfer size and larger maximum transfer size. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dmaengine: PL08x: Move LLI dumping code into separate functionTomasz Figa
This patch refactors debugging code that dumps LLI entries by moving it into separate function, which is stubbed when VERBOSE_DEBUG is not selected. This allows us to get rid of the ugly ifdef from the body of pl08x_fill_llis_for_desc(). No functional change is introduced by this patch. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dmaengine: PL08x: Rework LLI handling to be less fragileTomasz Figa
Currently memory allocated for LLIs is casted to an array of structs, which is fragile and also limits the driver to a single, predefined LLI layout, while there are some variants of PL08x, which have more fields in LLI (namely PL080S with its extra CCTL2). This patch makes LLIs a sequence of 32-bit words, which is just filled with appropriate values in appropriate order and padded with required amount of dummy words (currently zero, but PL080S will make better use of this). Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dmaengine: PL08x: Add support for different offset of CONFIG registerTomasz Figa
Some variants of PL08x (namely PL080S, found in Samsung S3C64xx SoCs) have CONFIG register at different offset. This patch makes the driver use offset from vendor data struct. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dmaengine: PL08x: Refactor pl08x_getbytes_chan() to lower indentationTomasz Figa
Further patch will introduce support for PL080S, which requires some things to be done conditionally, thus increasing indentation level of some functions even more. This patch reduces indentation level of pl08x_getbytes_chan() function by inverting several conditions and returning from function wherever possible. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-22DMA: fix printk warning in AMBA PL08x DMA driverAndre Przywara
In Rob's recent pull request the patch ARM: highbank: select ARCH_DMA_ADDR_T_64BIT for LPAE promotes dma_addr_t to 64bit, so printk generates a warning about an incorrect type. Fix this by casting it to u64 and using %llx. Fixing long lines on the way. Signed-off-by: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-08-22DMA: fix AMBA PL08x compilation issue with 64bit DMA address typeAndre Przywara
When dma_addr_t is 64 bits long, compilation of the AMBA PL08x DMA driver breaks due to a missing 64bit%8bit modulo operation. Looking more closely the divisor in these operations can only be 1, 2 or 4, so the full featured '%' modulo operation is overkill and can be replaced with simple bit masking. Change from v1: Replace open-coded function with existing IS_ALIGNED macro and use a macro around that to avoid a line becoming too long. Signed-off-by: Andre Przywara <andre.przywara@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2013-07-05dmaengine: PL08x: Avoid collisions with get_signal() macroMark Brown
As pointed out by Arnd Bergmann there is a get_signal macro definied in linux/signal.h which can conflict with the platform data callback function of the same name leading to confusing errors from the compiler (especially if signal.h manages to get pulled into the driver itself due to header dependencies). Avoid such errors by renaming get_signal and put_signal in the platform data to get_xfer_signal and put_xfer_signal. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-13pl080.h: moved from arm/include/asm/hardware to include/linux/amba/Alessandro Rubini
The header is used by drivers/dma/amba-pl08x.c, which can be compiled under x86, where PL080 exists under a PCI-to-AMBA bridge. This patche moves it where it can be accessed by other architectures, and fixes all users. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-07dma: amba-pl08x: use vchan_dma_desc_free_listAkinobu Mita
vchan_dma_desc_free_list() iterates through each virt_dma_desc in the specified list_head and calls vchan->desc_free(). We can use it instead of repeated execution of pl08x_desc_free() for each virt_dma_desc in the list_head. Because vchan->desc_free callback is set as pl08x_desc_free() for amba-pl08x driver. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-08-22drivers/dma/amba-pl08x.c: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-01dmaengine: PL08x: ensure all descriptors are freed when channel is releasedRussell King
Ensure all queued descriptors are freed when the channel is released, ensuring we don't leak memory Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-01dmaengine: PL08x: get rid of write only pool_ctr and free_txd lockingRussell King
The free function says the pl08x lock should be taken before calling it. However, the DMA pool allocation/freeing is already properly locked. The only thing that would need this is pool_ctr, which happens to be a write-only variable. Let's get rid of this, and eliminate any need for additional locking here. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 09:20:47 +0000