summaryrefslogtreecommitdiff
path: root/drivers/devfreq
AgeCommit message (Collapse)Author
2020-01-16PM / devfreq: Add debugfs support with devfreq_summary fileChanwoo Choi
Add debugfs interface to provide debugging information of devfreq device. It contains 'devfreq_summary' entry to show the summary of registered devfreq devices as following and the additional debugfs file will be added. - /sys/kernel/debug/devfreq/devfreq_summary [Detailed description of each field of 'devfreq_summary' debugfs file] - dev_name : Device name of h/w - dev : Device name made by devfreq core - parent_dev : If devfreq device uses the passive governor, show parent devfreq device name. Otherwise, show 'null'. - governor : Devfreq governor name - polling_ms : If devfreq device uses the simple_ondemand governor, polling_ms is necessary for the period. (unit: millisecond) - cur_freq_Hz : Current frequency (unit: Hz) - min_freq_Hz : Minimum frequency (unit: Hz) - max_freq_Hz : Maximum frequency (unit: Hz) [For example on Exynos5422-based Odroid-XU3 board] $ cat /sys/kernel/debug/devfreq/devfreq_summary dev_name dev parent_dev governor polling_ms cur_freq_Hz min_freq_Hz max_freq_Hz ------------------------------ ---------- ---------- --------------- ---------- ------------ ------------ ------------ 10c20000.memory-controller devfreq0 null simple_ondemand 0 165000000 165000000 825000000 soc:bus_wcore devfreq1 null simple_ondemand 50 532000000 88700000 532000000 soc:bus_noc devfreq2 devfreq1 passive 0 111000000 66600000 111000000 soc:bus_fsys_apb devfreq3 devfreq1 passive 0 222000000 111000000 222000000 soc:bus_fsys devfreq4 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_fsys2 devfreq5 devfreq1 passive 0 200000000 75000000 200000000 soc:bus_mfc devfreq6 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_gen devfreq7 devfreq1 passive 0 266000000 88700000 266000000 soc:bus_peri devfreq8 devfreq1 passive 0 66600000 66600000 66600000 soc:bus_g2d devfreq9 devfreq1 passive 0 333000000 83250000 333000000 soc:bus_g2d_acp devfreq10 devfreq1 passive 0 266000000 66500000 266000000 soc:bus_jpeg devfreq11 devfreq1 passive 0 300000000 75000000 300000000 soc:bus_jpeg_apb devfreq12 devfreq1 passive 0 166500000 83250000 166500000 soc:bus_disp1_fimd devfreq13 devfreq1 passive 0 200000000 120000000 200000000 soc:bus_disp1 devfreq14 devfreq1 passive 0 300000000 120000000 300000000 soc:bus_gscl_scaler devfreq15 devfreq1 passive 0 300000000 150000000 300000000 soc:bus_mscl devfreq16 devfreq1 passive 0 666000000 84000000 666000000 [lkp: Reported the build error] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-01-06PM / devfreq: exynos: Rename Exynos to lowercaseKrzysztof Kozlowski
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-31PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERRYueHaibing
Fix inconsistent IS_ERR and PTR_ERR in imx8m_ddrc_probe(). Detected using Coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Add error log when fail to get devfreq-eventYangtao Li
Adding an error log makes it easier to trace the function's error path. Because the error code may be rewritten on return, print error code here. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Disable devfreq-event device when failsYangtao Li
The exynos_bus_profile_init process may fail, but the devfreq event device remains enabled. Call devfreq_event_disable_edev on the error return path. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rk3399_dmc: Disable devfreq-event device when failsYangtao Li
The probe process may fail, but the devfreq event device remains enabled. Call devfreq_event_disable_edev on the error return path. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: imx8m-ddrc: Remove unused definesLeonard Crestez
The IMX_SIP_DDR_DVFS_WAIT_CHANGE and IMX_SIP_DDR_FREQ_SET_HIGH defines are not used so they can be removed. Fixes: 518e99e2a22e ("PM / devfreq: Add dynamic scaling for imx8m ddr controller") Reported-by: Shawn Guo <shawn.guo@kernel.org> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Reduce goto statements and remove unused headersArtur Świgoń
Improve code readability by changing the goto statements as well as eliminating a few more goto statements (related to return paths). Moreover, remove unused header file and adds a missing <linux/of.h>. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> [cw00.choi: Edit patch title and description] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependencyChanwoo Choi
To build test, add COMPILE_TEST depedency to both ARM_RK3399_DMC_DEVFREQ and DEVFREQ_EVENT_ROCKCHIP_DFI configuration. And ARM_RK3399_DMC_DEVFREQ used the SMCCC interface so that add HAVE_ARM_SMCCC dependency to prevent the build break. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resourceYangtao Li
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rk3399_dmc: Add missing of_node_put()Yangtao Li
of_node_put() needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: rockchip-dfi: Add missing of_node_put()Yangtao Li
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Fix multiple kernel-doc warningsRandy Dunlap
Fix kernel-doc warnings in devfreq files. Also fix a typo. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive()Artur Świgoń
This patch adds a new exynos_bus_profile_init_passive() extracted from exynos_bus_probe() for devfreq device using passive governor. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> [cw00.choi: Edit description to indicate that function is for devfreq device using passive governor] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-bus: Extract exynos_bus_profile_init()Artur Świgoń
This patch adds a new exynos_bus_profile_init() extracted from exynos_bus_probe() for devfreq device using simple_ondemand governor like parent devfreq device. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> [cw00.choi: Edit description to indicate that new function is for parent devfreq device] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq)Kamil Konieczny
Declaration of DEVICE_ATTR_RW(min_freq) is placed after function max_freq_store. Move it to the correct place after min_freq_show. Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Move statistics to separate struct devfreq_statsKamil Konieczny
Count time and transitions between devfreq frequencies in separate struct devfreq_stats for improved code readability and maintenance. Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> [cw00.choi: Fix the merge conflict in trasn_stat_store and use 'devfreq->stats.*' style for consistent coding style and restore the clean-up code of 'devfreq->profile->*'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Add clearing transitions statsKamil Konieczny
Add clearing transition table and time in states devfreq statistics by writing 0 (zero) to trans_stat file in devfreq sysfs. An example use is like following: echo 0 > /sys/class/devfreq/devfreqX/trans_stat Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com> [cw00.choi: Edit return value if entering the wrong value for reset and use arrary3_size() to get the size of 3-dimensional array] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Change time stats to 64-bitKamil Konieczny
Change time stats counting to bigger type by using 64-bit jiffies. This will make devfreq stats code look similar to cpufreq stats and prevents overflow (for HZ = 1000 after 49.7 days). Signed-off-by: Kamil Konieczny <k.konieczny@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Add new name attribute for sysfsChanwoo Choi
The commit 4585fbcb5331 ("PM / devfreq: Modify the device name as devfreq(X) for sysfs") changed the node name to devfreq(x). After this commit, it is not possible to get the device name through /sys/class/devfreq/devfreq(X)/*. Add new name attribute in order to get device name. Cc: stable@vger.kernel.org Fixes: 4585fbcb5331 ("PM / devfreq: Modify the device name as devfreq(X) for sysfs") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Add dynamic scaling for imx8m ddr controllerLeonard Crestez
Add driver for dynamic scaling the DDR Controller on imx8m chips. Actual frequency switching is implemented inside TF-A, this driver wraps the SMC calls and synchronizes the clk tree. The DRAM clocks on imx8m have the following structure (abridged): +----------+ |\ +------+ | dram_pll |-------|M| dram_core | | +----------+ |U|---------->| D | /--|X| | D | dram_alt_root | |/ | R | | | C | +---------+ | | |FIX DIV/4| | | +---------+ | | composite: | | | +----------+ | | | | dram_alt |----/ | | +----------+ | | | dram_apb |-------------------->| | +----------+ +------+ The dram_pll is used for higher rates and dram_alt is used for lower rates. The dram_alt and dram_apb clocks are "imx composite" and their parent can also be modified. This driver will prepare/enable the new parents ahead of switching (so that the expected roots are enabled) and afterwards it will call clk_set_parent to ensure the parents in clock framework are up-to-date. The driver relies on dram_pll dram_alt and dram_apb being marked with CLK_GET_RATE_NOCACHE for rate updates. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> [cw00.choi: Edit the COMPILE_TEST module dependency in Kconfig] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-30PM / devfreq: exynos-ppmu: Fix excessive stack usageArnd Bergmann
Putting a 'struct devfreq_event_dev' object on the stack is generally a bad idea and here it leads to a warnig about potential stack overflow: drivers/devfreq/event/exynos-ppmu.c:643:12: error: stack frame size of 1040 bytes in function 'exynos_ppmu_probe' [-Werror,-Wframe-larger-than=] There is no real need for the device structure, only the string inside it, so add an internal helper function that simply takes the string as its argument and remove the device structure. Fixes: 1dd62c66d345 ("PM / devfreq: events: extend events by type of counted data") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [cw00.choi: Fix the issue from 'desc->name' to 'desc[j].name'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-23PM / devfreq: tegra: Add COMMON_CLK dependencyArnd Bergmann
Compile-testing this driver fails if CONFIG_COMMON_CLK is not set: drivers/devfreq/tegra30-devfreq.o: In function `tegra_devfreq_target': tegra30-devfreq.c:(.text+0x164): undefined reference to `clk_set_min_rate' Fixes: 35f8dbc72721 ("PM / devfreq: tegra: Enable COMPILE_TEST for the driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-23PM / devfreq: Drop explicit selection of PM_OPPLeonard Crestez
CONFIG_PM_OPP is already selected by CONFIG_PM_DEVFREQ since commit b9c69e043266 ("PM / devfreq: Add dependency on PM_OPP"). This means that individual drivers shouldn't "select PM_OPP" explicitly. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> [cw00.choi: Edit the patch title] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Use PM QoS for sysfs min/max_freqLeonard Crestez
Switch the handling of min_freq and max_freq from sysfs to use the dev_pm_qos_request interface. Since PM QoS handles frequencies as kHz this change reduces the precision of min_freq and max_freq. This shouldn't introduce problems because frequencies which are not an integer number of kHz are likely not an integer number of Hz either. Try to ensure compatibility by rounding min values down and rounding max values up. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> [cw00.choi: Return -EAGAIN instead of -EINVAL if dev_pm_qos is inactive] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Add PM QoS supportLeonard Crestez
Register notifiers with the PM QoS framework in order to respond to requests for DEV_PM_QOS_MIN_FREQUENCY and DEV_PM_QOS_MAX_FREQUENCY. No notifiers are added by this patch but PM QoS constraints can be imposed externally (for example from other devices). Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Don't fail devfreq_dev_release if not in listLeonard Crestez
Right now devfreq_dev_release will print a warning and abort the rest of the cleanup if the devfreq instance is not part of the global devfreq_list. But this is a valid scenario, for example it can happen if the governor can't be found or on any other init error that happens after device_register. Initialize devfreq->node to an empty list head in devfreq_add_device so that list_del becomes a safe noop inside devfreq_dev_release and we can continue the rest of the cleanup. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Introduce get_freq_range helperLeonard Crestez
Moving handling of min/max freq to a single function and call it from update_devfreq and for printing min/max freq values in sysfs. This changes the behavior of out-of-range min_freq/max_freq: clamping is now done at evaluation time. This means that if an out-of-range constraint is imposed by sysfs and it later becomes valid then it will be enforced. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Set scaling_max_freq to max on OPP notifier errorLeonard Crestez
The devfreq_notifier_call functions will update scaling_min_freq and scaling_max_freq when the OPP table is updated. If fetching the maximum frequency fails then scaling_max_freq remains set to zero which is confusing. Set to ULONG_MAX instead so we don't need special handling for this case in other places. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09PM / devfreq: Fix devfreq_notifier_call returning errnoLeonard Crestez
Notifier callbacks shouldn't return negative errno but one of the NOTIFY_OK/DONE/BAD values. The OPP core will ignore return values from notifiers but returning a value that matches NOTIFY_STOP_MASK will stop the notification chain. Fix by always returning NOTIFY_OK. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-29PM / devfreq: Add missing locking while setting suspend_freqMarek Szyprowski
Commit 2abb0d5268ae ("PM / devfreq: Lock devfreq in trans_stat_show") revealed a missing locking while calling devfreq_update_status() function during suspend/resume cycle. Code analysis revealed that devfreq_set_target() function was called without needed locks held for setting device specific suspend_freq if such has been defined. This patch fixes that by adding the needed locking, what fixes following kernel warning on Exynos4412-based OdroidU3 board during system suspend: PM: suspend entry (deep) Filesystems sync: 0.002 seconds Freezing user space processes ... (elapsed 0.001 seconds) done. OOM killer disabled. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1385 at drivers/devfreq/devfreq.c:204 devfreq_update_status+0xc0/0x188 Modules linked in: CPU: 2 PID: 1385 Comm: rtcwake Not tainted 5.4.0-rc6-next-20191111 #6848 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c0112588>] (unwind_backtrace) from [<c010e070>] (show_stack+0x10/0x14) [<c010e070>] (show_stack) from [<c0afb010>] (dump_stack+0xb4/0xe0) [<c0afb010>] (dump_stack) from [<c01272e0>] (__warn+0xf4/0x10c) [<c01272e0>] (__warn) from [<c01273a8>] (warn_slowpath_fmt+0xb0/0xb8) [<c01273a8>] (warn_slowpath_fmt) from [<c07d105c>] (devfreq_update_status+0xc0/0x188) [<c07d105c>] (devfreq_update_status) from [<c07d2d70>] (devfreq_set_target+0xb0/0x15c) [<c07d2d70>] (devfreq_set_target) from [<c07d3598>] (devfreq_suspend+0x2c/0x64) [<c07d3598>] (devfreq_suspend) from [<c05de0b0>] (dpm_suspend+0xa4/0x57c) [<c05de0b0>] (dpm_suspend) from [<c05def74>] (dpm_suspend_start+0x98/0xa0) [<c05def74>] (dpm_suspend_start) from [<c0195b58>] (suspend_devices_and_enter+0xec/0xc74) [<c0195b58>] (suspend_devices_and_enter) from [<c0196a20>] (pm_suspend+0x340/0x410) [<c0196a20>] (pm_suspend) from [<c019480c>] (state_store+0x6c/0xc8) [<c019480c>] (state_store) from [<c033fc50>] (kernfs_fop_write+0x10c/0x228) [<c033fc50>] (kernfs_fop_write) from [<c02a6d3c>] (__vfs_write+0x30/0x1d0) [<c02a6d3c>] (__vfs_write) from [<c02a9afc>] (vfs_write+0xa4/0x180) [<c02a9afc>] (vfs_write) from [<c02a9d58>] (ksys_write+0x60/0xd8) [<c02a9d58>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xed3d7fa8 to 0xed3d7ff0) ... irq event stamp: 9667 hardirqs last enabled at (9679): [<c0b1e7c4>] _raw_spin_unlock_irq+0x20/0x58 hardirqs last disabled at (9698): [<c0b16a20>] __schedule+0xd8/0x818 softirqs last enabled at (9694): [<c01026fc>] __do_softirq+0x4fc/0x5fc softirqs last disabled at (9719): [<c012fe68>] irq_exit+0x16c/0x170 ---[ end trace 41ac5b57d046bdbc ]--- ------------[ cut here ]------------ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-06PM / devfreq: tegra30: Tune up MCCPU boost-down coefficientDmitry Osipenko
MCCPU boosts up very aggressively by 800% and boosts down very mildly by 10%. This doesn't work well when system is idling because the very slow de-boosting results in lots of consecutive-down interrupts, in result memory stays clocked high and CPU doesn't enter deepest idling state instead of keeping memory at lowest freq and having CPU cluster turned off. A more faster de-boosting fixes the case of idling system and doesn't affect the case of an active system. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Support variable polling intervalDmitry Osipenko
The ACTMON governor is interrupt-driven and currently hardware's polling interval is fixed to 16ms in the driver. Devfreq supports variable polling interval by the generic governors, let's re-use the generic interface for changing of the polling interval. Now the polling interval can be changed dynamically via /sys/class/devfreq/devfreq0/polling_interval. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: Add new interrupt_driven flag for governorsDmitry Osipenko
Currently interrupt-driven governors (like NVIDIA Tegra30 ACTMON governor) are used to set polling_ms=0 in order to avoid periodic polling of device status by devfreq core. This means that polling interval can't be changed by userspace for such governors. The new governor flag allows interrupt-driven governors to convey that devfreq core shouldn't perform polling of device status and thus generic devfreq polling interval could be supported by these governors now. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Use kHz units for dependency thresholdDmitry Osipenko
The dependency threshold designates a memory activity level below which CPU's frequency isn't accounted. Currently the threshold is given in "memory cycle" units and that value depends on the polling interval which is fixed to 12ms in the driver. Later on we'd want to add support for a variable polling interval and thus the threshold value either needs to be scaled in accordance to the polling interval or it needs to be represented in a units that do not depend on the polling interval. It is nicer to have threshold value being defined independently of the polling interval, thus this patch converts the dependency threshold units from "cycle" to "kHz". Having this change as a separate-preparatory patch will make easier to follow further patches. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Disable consecutive interrupts when appropriateDmitry Osipenko
Consecutive interrupts should be disabled when boosting is completed. Currently the disabling of "lower" interrupt happens only for MCCPU monitor that uses dependency threshold, but even in a case of MCCPU the interrupt isn't getting disabled if CPU's activity is above the threshold. This results in a lot of dummy interrupt requests. The boosting feature is used by both MCCPU and MCALL, boosting should be stopped once it reaches 0 for both of the monitors and regardless of the activity level. The boosting stops to grow once the maximum limit is hit and thus the "upper" interrupt needs to be disabled when the limit is reached. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Don't enable already enabled consecutive interruptsDmitry Osipenko
Consecutive up/down interrupt-bit is set in the interrupt status register only if that interrupt was previously enabled. Thus enabling the already enabled interrupt doesn't do much for us. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Include appropriate headerDmitry Osipenko
It's not very correct to include mod_devicetable.h for the OF device drivers and of_device.h should be included instead. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Constify structsDmitry Osipenko
Constify unmodifiable structs, for consistency. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Don't enable consecutive-down interrupt on startupDmitry Osipenko
The consecutive-down event tells that we should perform frequency de-boosting, but boosting is in a reset state on start and hence the event won't do anything useful for us and it will be just a dummy interrupt request. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Reset boosting on startupDmitry Osipenko
Governor could be stopped while boosting is active. We have assumption that everything is reset on governor's restart, including the boosting value, which was missed. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Move clk-notifier's registration to governor's startDmitry Osipenko
There is no point in receiving of the notifications while governor is stopped, let's keep them disabled like we do for the CPU freq-change notifications. This also fixes a potential use-after-free bug if notification happens after device's removal. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Use CPUFreq notifierDmitry Osipenko
The CPU's client need to take into account that CPUFreq may change while memory activity not, staying high. Thus an appropriate frequency notifier should be used in addition to the clk-notifier. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Use kHz units uniformly in the codeDmitry Osipenko
Part of the code uses Hz units and the other kHz, let's switch to kHz everywhere for consistency. A small benefit from this change (besides code's cleanup) is that now powertop utility correctly displays devfreq's stats, for some reason it expects them to be in kHz. Tested-by: Peter Geis <pgwipeout@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Fix integer overflow on CPU's freq max outDmitry Osipenko
There is another kHz-conversion bug in the code, resulting in integer overflow. Although, this time the resulting value is 4294966296 and it's close to ULONG_MAX, which is okay in this case. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Drop write-barrierDmitry Osipenko
There is no need in a write-barrier now, given that interrupt masking is handled by CPU's GIC now. Hence we know exactly that interrupt won't fire after stopping the devfreq's governor. In other cases we don't care about potential buffering of the writes to hardware and thus there is no need to stall CPU. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Handle possible round-rate errorDmitry Osipenko
The EMC clock rate rounding technically could fail, hence let's handle the error cases properly. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Keep interrupt disabled while governor is stoppedDmitry Osipenko
There is no real need to keep interrupt always-enabled, will be nicer to keep it disabled while governor is inactive. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-06PM / devfreq: tegra30: Change irq type to unsigned intDmitry Osipenko
IRQ numbers are always positive, hence the corresponding variable should be unsigned to keep types consistent. This is a minor change that cleans up code a tad more. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 12:13:23 +0000